Database Develop

Mi Mix - sound problems after updating on Linieage os 15.1

Hi,
I changed the software of my Mi Mix 6 months ago to lineage os - after the change of the os, the sound was not running properly anymore. In the forum someone did help me out with software for a firmware update. Now I updated on Lineage os 15.1 and the soundproblems are there again. Can someone tell me, if I have to update the firmware again, respectively where I can find the relevant software. Thanks for helping!

H0707 said:
Hi,
I changed the software of my Mi Mix 6 months ago to lineage os - after the change of the os, the sound was not running properly anymore. In the forum someone did help me out with software for a firmware update. Now I updated on Lineage os 15.1 and the soundproblems are there again. Can someone tell me, if I have to update the firmware again, respectively where I can find the relevant software. Thanks for helping!
Click to expand...
Click to collapse
how people gonna help you if you're not describing your problem with more details.
what is exactly the sound problem.

heindrix said:
how people gonna help you if you're not describing your problem with more details.
what is exactly the sound problem.
Click to expand...
Click to collapse
I am sorry - I have been not very precise. The sound itself is still working. But my device especially has problems to connect to myBluetooth Speaker. Maybe thats more a connection issue. There are further a bunch of small problems, I cannot explain. For example - I cannot download maps of different regions in my map app anymore. As well - I am using the yalp store to download certain apps I need - downloads or updates are not possible anymore. Half a year ago someone gave me this link for firmware updates: https://mega.nz/#F!zlJBQJhJ!BJuv0brw0doTafuLTXJATw Is it useful to update the firmware on a newer version?
Best

First you do not need to use a firmware for LoS 15.1, just the latest nightly which is here: https://download.lineageos.org/lithium
*Second.... Do NOT use any app store beside Google Play. Because it may cause problems to your phone. Use Google Play only... Any the apps can harm your device.... I would suggest to do a full wipe on the advance wipe option in TWRP... That means everything except for USB OTG.. Make sure you are done... Make sure all data partitions (DATA, Caches) is on EXT 4 before installing. See the info below near the photo.

If your phone still have problems.....I would suggest go back to Stock Firmware by using Mi Flash (make sure you click "Clean All" without locking your phone on the bottom right of Mi-Flash) when you boot your phone to to **bootloader**. You can use Mi Flash and flash the current Global Stable or Global Developer for the Mi Mix which is on en.miui.com/a-234.html then check to see if the problem still happens on either firmwares. If there is no problem, then by all means go back to LoS 15.1. The Miui Rom Flashing tool link is right above the list of the Miui Rom Version. And again i warn you before flashing the stock firmware to click the "Clean All" only.. not "Clean All and Lock" because it will lock your bootloader. Then after your done, check for any problems.. If the phone is ok.. Then go back to LoS 15.1 to determine if these problems still happen.. If it works fine.. Then you know why your phone had problems in the first place.
The photo is for you to see what to wipe when doing a clean installation of LoS 15.1.. Wipe all except for the USB OTG before flashing anything. Repair and Change system file is to check to see if all of your partitions is on EXT 4. Just to make sure you have no errors of any kind before installing.

H0707 said:
I am sorry - I have been not very precise. The sound itself is still working. But my device especially has problems to connect to myBluetooth Speaker. Maybe thats more a connection issue. There are further a bunch of small problems, I cannot explain. For example - I cannot download maps of different regions in my map app anymore. As well - I am using the yalp store to download certain apps I need - downloads or updates are not possible anymore. Half a year ago someone gave me this link for firmware updates: https://mega.nz/#F!zlJBQJhJ!BJuv0brw0doTafuLTXJATw Is it useful to update the firmware on a newer version?
Best
Click to expand...
Click to collapse
download and flash the latest firmware i cooked from my google drive : https://drive.google.com/drive/mobile/folders/1PGmzEcmgG0XhRB7110CDDTgMwmw4N3MM
if the issue still there, it's not firmware problem, maybe it's the ROM problem.
you can try CrDroid : https://forum.xda-developers.com/mi-mix/development/rom-crdroid-t3758726
or AICP : https://forum.xda-developers.com/mi-mix/development/rom-aicp-13-1-t3746648
or Resurrection Remix : https://forum.xda-developers.com/mi-mix/development/rom-resurrection-remix-t3751314

heindrix said:
download and flash the latest firmware i cooked from my google drive : https://drive.google.com/drive/mobile/folders/1PGmzEcmgG0XhRB7110CDDTgMwmw4N3MM
if the issue still there, it's not firmware problem, maybe it's the ROM problem.
you can try CrDroid : https://forum.xda-developers.com/mi-mix/development/rom-crdroid-t3758726
or AICP : https://forum.xda-developers.com/mi-mix/development/rom-aicp-13-1-t3746648
or Resurrection Remix : https://forum.xda-developers.com/mi-mix/development/rom-resurrection-remix-t3751314
Click to expand...
Click to collapse
Thanks a lot for your extensive response.
One thing - out of some reason I cannot start TWRP manually (maybe cause I encrypted my hard-drive). I only can start it using adb. Once, my recovery is started, I can not connect to the phones hard-drive via my computer anymore. Am I not deleting the complete hard-drive plus OS, when I am performing an extended wipe - as you are suggesting. My problem is, that I am afraid, that I am not able to install a new OS after a wipe (since I will delete all data stored on the hard-drive and to enter my hard-drive again, I would have to start the phone...).
Ps. I never heard that it might cause problems to install apps from apps like the yalp store. Since I am not interested to have all the google surveillance software on my phone, using a costum rom without gapps seemed a good way for me till now.

H0707 said:
Thanks a lot for your extensive response.
One thing - out of some reason I cannot start TWRP manually (maybe cause I encrypted my hard-drive). I only can start it using adb. Once, my recovery is started, I can not connect to the phones hard-drive via my computer anymore. Am I not deleting the complete hard-drive plus OS, when I am performing an extended wipe - as you are suggesting. My problem is, that I am afraid, that I am not able to install a new OS after a wipe (since I will delete all data stored on the hard-drive and to enter my hard-drive again, I would have to start the phone...).
Ps. I never heard that it might cause problems to install apps from apps like the yalp store. Since I am not interested to have all the google surveillance software on my phone, using a costum rom without gapps seemed a good way for me till now.
Click to expand...
Click to collapse
Something weird happened - TWRP is not accepting my password anymore at the start. Thats strange cause my password is accepted, when I start the phone. Bad development

H0707 said:
Something weird happened - TWRP is not accepting my password anymore at the start. Thats strange cause my password is accepted, when I start the phone. Bad development
Click to expand...
Click to collapse
sorry for judging, but reading your details, i suppose you haven't learn a lot about customizing device.
if this suggestion didn't help you, i don't know anymore what will.
Flash TWRP (twrp-3.2.1-raupe-blunden-15.1-updated.img) -> Boot into TWRP -> Swipe to Allow Modifications -> Cancel when TWRP asks for password -> Go To Wipe -> Press Format Data button and type YES and press enter -> Go To Wipe -> Press Advanced Wipe button -> Select all partitions except USB OTG and swipe to wipe -> Go to Mount -> Press Select Storage button and choose Internal Storage and press OK -> Press Mount USB Storage button -> Plug phone to PC -> Copy all files you want to flash from PC -> Unmount and unplug from PC -> Go to Mount -> Mount all partitions except USB OTG -> Flash files you want to flash

heindrix said:
sorry for judging, but reading your details, i suppose you haven't learn a lot about customizing device.
if this suggestion didn't help you, i don't know anymore what will.
Flash TWRP (twrp-3.2.1-raupe-blunden-15.1-updated.img) -> Boot into TWRP -> Swipe to Allow Modifications -> Cancel when TWRP asks for password -> Go To Wipe -> Press Format Data button and type YES and press enter -> Go To Wipe -> Press Advanced Wipe button -> Select all partitions except USB OTG and swipe to wipe -> Go to Mount -> Press Select Storage button and choose Internal Storage and press OK -> Press Mount USB Storage button -> Plug phone to PC -> Copy all files you want to flash from PC -> Unmount and unplug from PC -> Go to Mount -> Mount all partitions except USB OTG -> Flash files you want to flash
Click to expand...
Click to collapse
Dear Hendrix, I am not a pro just an interested person trying to emancipate myself dealing with smartphonetechnology. Thanks a lot for your guideline. I will try your advice as soon as I find the time. Will let you know, if everything worked out! Best wishes

For what it's worth, flashing the firmware provided by hendrix fixed my lineageos 15.1 problems.
I recently moved into LineageOS coming from latest MIUI 10 by Xiaomi.eu. Initially everything worked fine except for sound when playing media files (notification sound works). The firmware flash fixed everything.

heindrix said:
sorry for judging, but reading your details, i suppose you haven't learn a lot about customizing device.
if this suggestion didn't help you, i don't know anymore what will.
Flash TWRP (twrp-3.2.1-raupe-blunden-15.1-updated.img) -> Boot into TWRP -> Swipe to Allow Modifications -> Cancel when TWRP asks for password -> Go To Wipe -> Press Format Data button and type YES and press enter -> Go To Wipe -> Press Advanced Wipe button -> Select all partitions except USB OTG and swipe to wipe -> Go to Mount -> Press Select Storage button and choose Internal Storage and press OK -> Press Mount USB Storage button -> Plug phone to PC -> Copy all files you want to flash from PC -> Unmount and unplug from PC -> Go to Mount -> Mount all partitions except USB OTG -> Flash files you want to flash
Click to expand...
Click to collapse
Dear Hendrix,
everything worked fine - the device feels like new - thanks!
If you have questions on cultural sciences (am holding a PHD in this area) you can always ask me - I for sure will not start judging you in your unprofessional first moves

H0707 said:
Dear Hendrix,
everything worked fine - the device feels like new - thanks!
If you have questions on cultural sciences (am holding a PHD in this area) you can always ask me - I for sure will not start judging you in your unprofessional first moves
Click to expand...
Click to collapse
Me too, Phone itself worked great, had NO sound from Google Assistant, no sound from headphones, no sound from speakers, but did have ring/notifications and some sound. Video was laggy and intermittent on youtube and the net..... I tried many different Roms, Many newer firmwares and the ONLY ONLY thing that worked was the suggestion to try firmware 8.1.4
After that all is working great...…………..

garythompson said:
Me too, Phone itself worked great, had NO sound from Google Assistant, no sound from headphones, no sound from speakers, but did have ring/notifications and some sound. Video was laggy and intermittent on youtube and the net..... I tried many different Roms, Many newer firmwares and the ONLY ONLY thing that worked was the suggestion to try firmware 8.1.4
After that all is working great...…………..
Click to expand...
Click to collapse
Some users said that there are problems on firmware more than 8.8.2 version, 8.8.2 still works fine. but i don't know if it will works for you too.

Android 10 GSI

I have tested many GSIs on my T510 and finally found the GSI best for tablet users. It deosn't have any tablet specialized UI but it can be customized to give a better experience over the others- https://sourceforge.net/projects/treblerom/files/BLESS/2020.10.15/bless-v224-201015-a64-bvN.img.xz/download
It has Slim Recents, Safety Net passes, Selinux Enforcing and Nice Quick Setting Panel. Screenshots- http://imgur.com/a/TmYgvUh
Bugs- If brightness goes below 10% then it becomes too dark to see anything so you have to focus light on the screen to faintly see anything and turn the brightness up (It is the bug in all the GSIs by the way, it is not GSI sided but vendor sided), so don't keep the brightness too low.

everything else working fine? and can you please provide instruction on how to install these gsi builds

ayushagarwal9753 said:
everything else working fine? and can you please provide instruction on how to install these gsi builds
Click to expand...
Click to collapse
Everything seems to work fine except a few UI hiccups here and there which are quite expected in GSI builds. Moreover due to heavy customization you get lesser free RAM than the other.
Instructions- Download and unzip this GSI in internal storage, SD card or USB-OTG then flash that image into system partition by choosing 'system partition' while installation, flash gapps (ARM) and reboot to system.

Mrigendra10 said:
Everything seems to work fine except a few UI hiccups here and there which are quite expected in GSI builds. Moreover due to heavy customization you get lesser free RAM than the other.
Instructions- Download and unzip this GSI in internal storage, SD card or USB-OTG then flash that image into system partition by choosing 'system partition' while installation, flash gapps (ARM) and reboot to system.
Click to expand...
Click to collapse
O nice will try that. Thanks a lot !!!

Mrigendra10 said:
Everything seems to work fine except a few UI hiccups here and there which are quite expected in GSI builds. Moreover due to heavy customization you get lesser free RAM than the other.
Instructions- Download and unzip this GSI in internal storage, SD card or USB-OTG then flash that image into system partition by choosing 'system partition' while installation, flash gapps (ARM) and reboot to system.
Click to expand...
Click to collapse
Flashed system image but when I tried opengapps ARM 10 nano, I get an error 70. Can you link to a gapps that is known to work with this image? I did wipe before flashing.

lewmur said:
Flashed system image but when I tried opengapps ARM 10 nano, I get an error 70. Can you link to a gapps that is known to work with this image? I did wipe before flashing.
Click to expand...
Click to collapse
Go to Wipe then advanced wipe then choose system and resize it. If shows an error do it again. Now you'll be able to flash gapps.

lewmur said:
Flashed system image but when I tried opengapps ARM 10 nano, I get an error 70. Can you link to a gapps that is known to work with this image? I did wipe before flashing.
Click to expand...
Click to collapse
Go to Wipe then advanced wipe then choose system and resize it. If shows an error do it again. Now you'll be able to flash gapps.

Mrigendra10 said:
Go to Wipe then advanced wipe then choose system and resize it. If shows an error do it again. Now you'll be able to flash gapps.
Click to expand...
Click to collapse
re-size worked but apparently the ROM doesn't like my ugly face. The facial recognition app keeps crashing during setup, and I can't get past it.

lewmur said:
re-size worked but apparently the ROM doesn't like my ugly face. The facial recognition app keeps crashing during setup, and I can't get past it.
Click to expand...
Click to collapse
Face unlock only works on ARM64 arch.

Mrigendra10 said:
Face unlock only works on ARM64 arch.
Click to expand...
Click to collapse
Then why does the setup wizard only include options with FR + ?

4929york said:
Then why does the setup wizard only include options with FR + ?
Click to expand...
Click to collapse
GSIs are meant to work on wide range of devices and tablets at the last, face unlock perhaps works on officially supported devices. But again may be cuz devs are lazy to remove it.

Mrigendra10 said:
GSIs are meant to work on wide range of devices and tablets at the last, face unlock perhaps works on officially supported devices. But again may be cuz devs are lazy to remove it.
Click to expand...
Click to collapse
I installed it based on YOUR advice that it worked on THIS tablet. So, I'm assuming there must be a solution to the problem of the setup wizard demanding FR when FR doesn't work. How do I get around it?

lewmur said:
...there must be a solution to the problem of the setup wizard demanding FR when FR doesn't work. How do I get around it?
Click to expand...
Click to collapse
For anyone else stuck here, proceed with choosing one of the several options you are presented with (PIN, pattern, etc) and on the following screen you can choose to skip.

[SHARE] LineageOS 19/18.1 android 11 and 12 Combined galaxy tab A 10.1 (2019)SM-T515/SM-T510

First of all this is not my work is just tried this rom and its preety stable. Thanks to developers @phhusson @Magendanz
DESCLAIMER :use it your own risk.
So finally this rom booted on galaxy tab SM-T515 everything thing is working with small bugs as mentioned below.
Download files given below:
Bugs :
1)voLTE: not working tried phh treble settings to solve the issue but no luck.
Other networks, data calling works perfectly
2)MTP: mtp not working but you can transfer files after booting device in TWRP mode
3)audio not recording in videos use open camera app and go to settings and set default audio as a source.
4)For Linageos 19 android 12 twrp internal storage nonaccesible so to restore back to stock ROM just falsh latest Odin firmware using
ODIN app
Reverting to Samsung oneui:
For Linageos 19 android 12 twrp internal storage nonaccesible so to restore back to stock ROM just falsh latest Odin firmware using
ODIN app
Download firmware using this app:
Download link for Android/Linux/Mac/Windows:
Releases · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Linageos18.1 user restore your oneui backup using twrp or use ODIN firmware.
Except these you can check and tell me I didn't found anything till now
Download this gsi fileonly this is compatible)
https://sourceforge.net/projects/andyyan-gsi/files/lineage-18.x/lineage-18.1-20211010-UNOFFICIAL-treble_a64_bvS-vndklite.img.xz/download
Download arm 32 android 11 gapps :
The Open GApps Project
OpenGApps.org offers information and pre-built packages of The Open GApps Project. The Open GApps Project is an open-source effort to script the automatic generation of up-to-date Google Apps packages. All Android versions and platforms supported.
opengapps.org
Linageos 19 android 12Gapps included)
https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/lineage-19.0-20220114-UNOFFICIAL-treble_a64_bgS.img.xz/download
Download magisk zip:
https://dl.magiskapp.com/MagiskZip/Magisk-v23.0.zip
If you gets device certification error follow this post:
How to Fix the "Device is not Certified by Google" Error
Are you having trouble with signing in to your Google account? Can't access the Google Play Store or use Google apps like Gmail, Maps, Play Music, or Photos? Seeing a "device is not certified by Google" error? Here's how to fix that.
www.xda-developers.com
XZ file extractor android app:
GZ & XZ Extract - File Opener - Apps on Google Play
Extractor tool for tar, tar.gz, gz, gz2 & xz files. Just few taps for result
play.google.com
Process :
1)Download all files given first extract xz file gsi file using xz extractor you gets img file.
2)Now transfer gsi.img, gapps and magisk file in tablet.
3)boot tablet to TWRP MODE
4)Now first select wipe >advance wipe>select system> slide
5) now go back click install click install img you will see your file click on it and select system partition and enter.
6) now we have to install gapps but we need to first resize system partition so
First click mount and mount system Partation now go to wipe>advance wipe>select system >clcik repair >click resize
7)now click install and. Select gapps and flash.
8)now go back install magisk and hit reboot.
After reboot you may face device certification error so to solve this go to magisk and install magisk hide props configuration module and reboot your phone.
[MODULE] [DEPRECATED] MagiskHide Props Config - SafetyNet, prop edits, and more - v6.1.2
MagiskHide Props Config v6.1.2 Note: This project is dead, and has been for some time. I have not been involved in the Android modding scene for some time and I no longer have the energy to take it up again. If anyone feels like taking over...
forum.xda-developers.com
Follow this video i will update thread soon
Android 11 Linageos 18.1
Android 12 lineageOS 19

How's the battery life?

works offline charge?

Pinage said:
How's the battery life?
Click to expand...
Click to collapse
Best battery life

Spawacz_Reduktor said:
works offline charge
Click to expand...
Click to collapse
Yes

@pankspoo
Have you tried LOS 19? I saw your video on aosp 12 build but from your video it seems that it sucks! Lineage I feel will be miles better than aosp so if you can try and get back it'll be really helpful!

Sukrith said:
@pankspoo
Have you tried LOS 19? I saw your video on aosp 12 build but from your video it seems that it sucks! Lineage I feel will be miles better than aosp so if you can try and get back it'll be really helpful!
Click to expand...
Click to collapse
Yes same time but that has grafix shutter issue same like gsi

pankspoo said:
Yes same time but that has grafix shutter issue same like gsi
Click to expand...
Click to collapse
There seems to be a new build, can you maybe try? It's based on 6th November build.

Sukrith said:
There seems to be a new build, can you maybe try? It's based on 6th November build.
Click to expand...
Click to collapse
Ok

In January I installed 17.1 using this ROM. Do I need to go through the whole process of resizing the partition, since I already did it for 17.1?

Never mind! I went ahead and installed it following the instruction . It works, thanks!

bedwere said:
Never mind! I went ahead and installed it following the instruction . It works, thanks!
Click to expand...
Click to collapse
Are you happy with this ROM?

Krekle said:
Are you happy with this ROM?
Click to expand...
Click to collapse
Yes, it's very stable.

I have one issue and some questions.
When using a Bluetooth Headset, I have no sound in apps like Jitsi. Mic on the Bluetooth Headset is working in Jitsi, the others can here me. When using e.g. youtube in Chromium I can hear sound via the Bluetooth Headset.
I checked "Force-disable A2DP offload" and restarted, still the same.
Any Ideas?
And some Questions:
- Is magisk only needed for root? I don't need to root, do i still have to install magisk?
- in twrp I can't mount the system partition, so I cant fix it, but the rom is working. So how to mount system?
- I don't want gapps, is it ok to use the roms without gapps? so eg this one ...treble_a64_bvS.img ?
- in the description downloadlinks you are using: 18: treble_a64_bvS-vndklite but 19: treble_a64_bgS, so should one use vndklite for 18 but not for 19? Or also for 19? What is better? ...
Regards

This is confirmed to work on the T-510? Curiosity will brick the tab, like it kills the cat....

Shawnashley said:
This is confirmed to work on the T-510? Curiosity will brick the tab, like it kills the cat....
Click to expand...
Click to collapse
Yep. It works. I previously had the latest Nexus rom flashed on my SMT-510, so in TWRP I just flashed Lineage 19.1 to system, formatted data, rebooted and it loaded successfully. With Magisk 24.1. It all runs surprisingly well. No issues so far other than no USB file transfer or ability to mount System partition.

HansMampf said:
I have one issue and some questions.
When using a Bluetooth Headset, I have no sound in apps like Jitsi. Mic on the Bluetooth Headset is working in Jitsi, the others can here me. When using e.g. youtube in Chromium I can hear sound via the Bluetooth Headset.
I checked "Force-disable A2DP offload" and restarted, still the same.
Any Ideas?
And some Questions:
- Is magisk only needed for root? I don't need to root, do i still have to install magisk?
- in twrp I can't mount the system partition, so I cant fix it, but the rom is working. So how to mount system?
- I don't want gapps, is it ok to use the roms without gapps? so eg this one ...treble_a64_bvS.img ?
- in the description downloadlinks you are using: 18: treble_a64_bvS-vndklite but 19: treble_a64_bgS, so should one use vndklite for 18 but not for 19? Or also for 19? What is better? ...
Regards
Click to expand...
Click to collapse
I can only answer some of your questions:
- Magisk is only used for root. It's not required.
- Mounting /system in TWRP or in a File explorer doesn't seem to be possible.
- GApps is built in to roms with "...bgS.img.xz". For vanilla roms without gapps download the "...bvS.img.xz"file.
- For LOS 19, I flashed treble_a64_bgS and didn't have an issue. I can't comment on the vndklite version or what it's used for since I never tried it.

betacrypt said:
Yep. It works. I previously had the latest Nexus rom flashed on my SMT-510, so in TWRP I just flashed Lineage 19.1 to system, formatted data, rebooted and it loaded successfully. With Magisk 24.1. It all runs surprisingly well. No issues so far other than no USB file transfer or ability to mount System partition.
Click to expand...
Click to collapse
Any idea about success of I am running Megadanz 11.0 ROM?

Shawnashley said:
Any idea about success of I am running Megadanz 11.0 ROM?
Click to expand...
Click to collapse
It's a good rom and works very well. I was using it before I upgraded to LOS19.1.

Hey there!
I Installed this a couple of weeks ago, but has to reinstall nexus stock 11.0 pretty quickly, as after spending an evening trying to fix issues, it just wouldn't work.
Issues:
1) App crashes are constant. I cannot open Chrome, YouTube, Google Podcasts, Twitter - they all crash to launcher. - Cache, dalvik and data was cleared, still nothing
2) Gesture Navigation is missing - is it meant to be?
3) Magisk installs successfully,, but is then not recognised by the app, meaning no modules. - Is that normal?
Does anyone have any idea on how I could fix these issues, so I can install again?
Many thanks

[SHARE] CAOS Custom AOSP project android 11 best rom for galaxy tab 10.1 (SMT515/SMT510)

So this is not my work I am just sharing this phh treble GSI which is fully tested and working super without any issues.
Installation:
Download this xz file(gapps included)
https://sourceforge.net/projects/treblerom/files/CAOS11/2022.02.28/caos-v315%2B220228-a64-bgZ.img.xz/download
Extract it and you will get image file place it in internal storage of phone.
Now Boot phone in TWRP and then tap install ,now tap install image tab now locate your CAOS image file and check mark system partition and slide bottom bar.
After flashing gets completed just go to wipe and do format data.
And reboot to the system.
Bugs:
1) adaptive brightness not working
2)some sensors are not working but still it will not cause issue
3)voLTE not working.
Here is full review of the rom

Will root this tablet soon and try it out!!
editnvm I thought I saw it as 2020 model

I just installed it and everything looks good so far. But I did NOT format the data partition. I had the Nexus ROM installed which didn't encrypt the data partition. Before booting this ROM, I used TWRP's file manager to see if the internal storage was encrypted and it wasn't. So it was like doing a dirty flash. It kept all of my apps and settings so all I had to do was arrange my home page. So, if your data partition isn't encrypted, you DON'T need to format it.

Hello, can you send the link to download the twrp? And for this tablet
(T515XXU8CVG2) Android version 11 is installed with Odin? Thank you

Hello, does it use less RAM than lineage os 19.1?

Install GSI ROMs on J3

Hello guys, I managed to install and run An Android 10/11/12 GSI Rom on my J3(SM-J330FN) and I'd like to share.
Step 1: You'll need to install project Kabob 2.0 to create the vender partition to actually boot up the GSI. It might act up to install but install it about 3-5 times until TWRP recognizes the vender partition.
Step 2: Download a64_bvn-vndklite type of GSI's for the phone. I researched and used treble info to actually check the needed type of GSI the phone can run. You must install no gapps, no root type of GSI.
Step 3: Extract the xz and you'll find the .img file, you can either copy it to the internal storage, use an OTG usb flash drive or a memory card. I prefer using external memory to install the Rom. Boot into TWRP, click install, click select image, find it wherever you put it and click on it. You'll be given about four options and they'll be two system partitions. I guess that the first one must be A and the other B, since the Rom naming scheme goes as bvn... Install in the second system partition. Reboot your device.
You might experience the device blacking at some point, press the home or power button and it will continue the boot animation. It's buggy because the vendor partitioner is a port from the J5 Prime because they both use the exynos 7570 chipset and there's no sound too. Even if you flash the audio fix from the project Kabob page/mega folder it just won't work. Even if you can't use the Rom as a daily driver, at least there's a possibility to breathing life into this piece of hardware
Recommend GSI ROMs: https://sourceforge.net/projects/andyyan-gsi/files/lineage-17.x/
Project Kabob: https://forum.xda-developers.com/t/...-project-kebab-2-0-v2-2-1-j330x-7570.4182787/
Works on all J3 2017 variants J330X.

MultiMan15 said:
Hello guys, I managed to install and run An Android 10/11/12 GSI Rom on my J3(SM-J330FN) and I'd like to share.
Step 1: You'll need to install project Kabob 2.0 to create the vender partition to actually boot up the GSI. It might act up to install but install it about 3-5 times until TWRP recognizes the vender partition.
Step 2: Download a64_bvn-vndklite type of GSI's for the phone. I researched and used treble info to actually check the needed type of GSI the phone can run. You must install no gapps, no root type of GSI.
Step 3: Extract the xz and you'll find the .img file, you can either copy it to the internal storage, use an OTG usb flash drive or a memory card. I prefer using external memory to install the Rom. Boot into TWRP, click install, click select image, find it wherever you put it and click on it. You'll be given about four options and they'll be two system partitions. I guess that the first one must be A and the other B, since the Rom naming scheme goes as bvn... Install in the second system partition. Reboot your device.
You might experience the device blacking at some point, press the home or power button and it will continue the boot animation. It's buggy because the vendor partitioner is a port from the J5 Prime because they both use the exynos 7570 chipset and there's no sound too. Even if you flash the audio fix from the project Kabob page/mega folder it just won't work. Even if you can't use the Rom as a daily driver, at least there's a possibility to breathing life into this piece of hardware
Recommend GSI ROMs: https://sourceforge.net/projects/andyyan-gsi/files/lineage-17.x/
Project Kabob: https://forum.xda-developers.com/t/...-project-kebab-2-0-v2-2-1-j330x-7570.4182787/
Works on all J3 2017 variants J330X.
Click to expand...
Click to collapse
Doesn't work for me so far.
Every gsi rom i try is a blackscreen only.