Related
Since in my last post I made a complete mess out of my first time trying to root my K20 and install lineage I wanted to my make a separate post so that I can list all the steps I need to take to correctly setup my phone how I want it.
What I actually want
A rooted device
Lineage OS
Minimal excess files (A clean Install)
Current Steps
Unlock and flash recovery
Backup
Format Data! (It's important if you come from Miui)
Install Q Firmware + vendor
Install LineageOS followed by gapps
Reboot into system and setup device.
Reboot into recovery and flash magisk
Profit???
Feel free to tell me how stupid I am and what I need to add to the list or steps I should take to make this process better.
I also dont know if its possible to get recovery and rom on android 10 versions.
Thanks
Did these steps not work?
Sent from my Redmi K20 Pro using Tapatalk
BJack0 said:
Since in my last post I made a complete mess out of my first time trying to root my K20 and install lineage I wanted to my make a separate post so that I can list all the steps I need to take to correctly setup my phone how I want it.
What I actually want
A rooted device
Lineage OS
Minimal excess files (A clean Install)
Current Steps
Flash a custom recovery
Create a backup
Root???
Install LineageOS
Profit???
Feel free to tell me how stupid I am and what I need to add to the list or steps I should take to make this process better.
Thanks
Click to expand...
Click to collapse
1. Unlock and flash recovery
2. Backup
3. Format Data! (It's important if you come from Miui)
4. Install Q Firmware + vendor
5. Install LineageOS followed by gapps
6. Reboot into system and setup device.
7. Reboot into recovery and flash magisk
You could also check LOS thread: Here and here
Remember:
Chinese firmware: Widevine L3 and NFC support
Indian firmware: Widevine L1 but no NFC support
ishaqtkr said:
Did these steps not work?
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
They may work as it but I was just wondering if anyone could go into more detail or if there was a better approach and from what Kollachi said there clearly is a better way that what I said.
Since I'm in stock ROM and haven't ever flashed AOSP ROM in this phone I'll just back off lol
Sent from my Redmi K20 Pro using Tapatalk
Kollachi said:
1. Unlock and flash recovery
2. Backup
3. Format Data! (It's important if you come from Miui)
4. Install Q Firmware + vendor
5. Install LineageOS followed by gapps
6. Reboot into system and setup device.
7. Reboot into recovery and flash magisk
Click to expand...
Click to collapse
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Any of the two recoveries will work. Q firmware means Android Q. Wile data/cache dalvik that's it. Regarding firmware, there's a clear topic of Lineage OS in K20 Pro forum which is still in unofficially state
Sent from my Redmi K20 Pro using Tapatalk
BJack0 said:
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Click to expand...
Click to collapse
1. You can take what you want. Orangefox is based on TWRP.
2. Format data is needed if you come from miui. If you did it you are good to go. But it wouldn't be false to wipe system, dalvic, cache
3.https://downloads.akhilnarang.me/MIUI/raphael/ --> Take 10.4.6.0 or 10.4.8.0 (Android 10 = Q)
4. No there is no specific version.
BJack0 said:
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Click to expand...
Click to collapse
I would recommend the latest TWRP from here
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
The dev is an official TWRP dev, so this version, or something very close to this, is likely to become official in the future.
OrangeFox is a heavily modified TWRP and has a lot of added functionality specific to MIUI. If you wanted to stay on stock MIUI, but debloat and have root, etc. then OF would be the better choice, as it has functionality that lets it play nicely with MIUI (it can remain installed when OTA updates are installed)
As someone new to flashing on Android, I would suggest downloading a 10.4.x fastboot ROM from the site I pointed to in your other post, then follow the same procedure to flash the ROM.
Make your choice based on Kollachi's info and what's important to you (HD Netflix - choose Indian, or a working NFC - choose Chinese)
However you MUST change the flash option to 'clean all'.
At this point you've got a nice squeaky clean starting point.
Boot into the ROM at least once, though it's not necessary to go through all the setup.
After that follow Kollachi's steps but you can now ignore the step to flash vendor and firmware as it's all part of the fastboot ROM already flashed.
Wipe cache and dalvik, format data.
There is no official LOS for this phone yet. Hopefully it will go official in the future.
For now just get the current Android 10 based LOS from here.
https://forum.xda-developers.com/k20-pro/development/rom-lineageos-17-0-t3976469/post80406191
Robbo.5000 said:
I would recommend the latest TWRP from here
The dev is an official TWRP dev, so this version, or something very close to this, is likely to become official in the future.
OrangeFox is a heavily modified TWRP and has a lot of added functionality specific to MIUI. If you wanted to stay on stock MIUI, but debloat and have root, etc. then OF would be the better choice, as it has functionality that lets it play nicely with MIUI (it can remain installed when OTA updates are installed)
As someone new to flashing on Android, I would suggest downloading a 10.4.x fastboot ROM from the site I pointed to in your other post, then follow the same procedure to flash the ROM.
Make your choice based on Kollachi's info and what's important to you (HD Netflix - choose Indian, or a working NFC - choose Chinese)
However you MUST change the flash option to 'clean all'.
At this point you've got a nice squeaky clean starting point.
Boot into the ROM at least once, though it's not necessary to go through all the setup.
After that follow Kollachi's steps but you can now ignore the step to flash vendor and firmware as it's all part of the fastboot ROM already flashed.
Wipe cache and dalvik, format data.
There is no official LOS for this phone yet. Hopefully it will go official in the future.
For now just get the current Android 10 based LOS from here.
Click to expand...
Click to collapse
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
BJack0 said:
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
Click to expand...
Click to collapse
I just told you what I have done and I'm running it so far without issues.
Robbo just said you should flash the whole Chinese or indian rom but I don't like his steps because:
1. File is much bigger
2. MiFlash is just meh
3. If you forgot to change the flash process you are bricked if you don't take the correct firmware for your phone.
Default option in Miflash is set to "Clean all and lock". Every time you use it, you will need to change it into "clean all" or something other.
Kollachi said:
I just told you what I have done and I'm running it so far without issues.
Robbo just said you should flash the whole Chinese or indian rom but I don't like his steps because:
1. File is much bigger
2. MiFlash is just meh
3. If you forgot to change the flash process you are bricked if you don't take the correct firmware for your phone.
Default option in Miflash is set to "Clean all and lock". Every time you use it, you will need to change it into "clean all" or something other.
Click to expand...
Click to collapse
Yes flashing the whole fastboot ROM does add the risk, if you forget to change the flash option, but you are guaranteed a clean slate and so less likely to have any niggling issues that nobody else has. I would bet large sums of money that many of the issues you see on here, where only one person has some problem and everyone else is fine, would be solved by fastboot flashing MIUI before installing the ROM of choice.
If you know what you're doing and know when you'll be OK with what you've got and know when it's best to start clean, then going with the vendor and firmware is easier.
But if your unsure and new to flashing on Android phones, I will always suggest go with the overkill and know you've got the clean slate to start with.
---------- Post added at 10:56 AM ---------- Previous post was at 10:36 AM ----------
BJack0 said:
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
Click to expand...
Click to collapse
It's sounds like the main issue is stock recovery is being restored. This is something that MIUI will do when it boots up.
When you first install TWRP you cannot boot into MIUI before booting to TWRP as you instantly lose TWRP. So you need to boot into TWRP first in order to do something to prevent it being overwritten.
Options are
1
Code:
fastboot boot TWRP.img
2 Use the button combo whilst still in fastboot - power and vol+, hold both until the phone vibrates and the initial logo appears.
Now to keep TWRP you need to either flash a custom ROM, flash Magisk or flash the dm-verity script.
In your case you want to flash LOS, so now you've booted into TWRP go ahead and continue with the steps given.
Also, wait until after you've formatted data before copying everything over. You can access the phone as an MTP device when in TWRP, so you'll be able to connect it to a PC and drag everything across, or you can stick everything on a USB OTG pen, if you have one, TWRP can read data from them too.
It's sounds like the main issue is stock recovery is being restored. This is something that MIUI will do when it boots up.
When you first install TWRP you cannot boot into MIUI before booting to TWRP as you instantly lose TWRP. So you need to boot into TWRP first in order to do something to prevent it being overwritten.
Options are
1
Code:
fastboot boot TWRP.img
2 Use the button combo whilst still in fastboot - power and vol+, hold both until the phone vibrates and the initial logo appears.
Now to keep TWRP you need to either flash a custom ROM, flash Magisk or flash the dm-verity script.
In your case you want to flash LOS, so now you've booted into TWRP go ahead and continue with the steps given.
Also, wait until after you've formatted data before copying everything over. You can access the phone as an MTP device when in TWRP, so you'll be able to connect it to a PC and drag everything across, or you can stick everything on a USB OTG pen, if you have one, TWRP can read data from them too.
Click to expand...
Click to collapse
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
BJack0 said:
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
Click to expand...
Click to collapse
You connect your phone to computer while in recovery to transfer the OS zip
Sent from my Redmi K20 Pro using Tapatalk
BJack0 said:
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
Click to expand...
Click to collapse
After format data, reboot your device into recovery again and transfer LOS, gapps and all files you need.
Format data kills the storage.
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Robbo.5000 said:
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Click to expand...
Click to collapse
Yes I did that and it worked, unmounting and remounting helps detect the storage in PC
Sent from my Redmi K20 Pro using Tapatalk
Robbo.5000 said:
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Click to expand...
Click to collapse
Yes that works. Tried it myself but prefer to reboot into recovery again.:laugh:
Finally Successful
After a long post I have finally finished the process successfully. This was pretty educational for me since I didn't understand any of this at the start I would like to thank everyone who reply's and all the information that you have provided.
need help guys, i stuck in bootloop.
- fastboot rom global china V10.3.17.0 PFKCNXM
- fastboot twrp 3.3.1
- format data
- flash vendor image cn 10.4.6.0
- wipe cache/dalvik
- flash lineage os
- flash gapps nano
- reboot
- stuck bootloop
TL;DR - Tried to downgrade Android 10 Xiaomi EU to Android 9 Xiaomi EU, tried wiping the device (besides storage). I can get into TWRP and Fastboot, just won't boot OS.
Detailed:
I was running the latest Android 10 Xiaomi EU Stable Rom MIUI 11 (11.0.2) and wanted to downgrade because I had a few issues.
I reinstalled the last stable Android 10 Xiaomi EU Stable Rom for MIUI 10 (10.3.17) and it ran fine. I then realized that I wanted to be back on Android 9....
I went and tried to install Android 9 Xiaomi EU Stable Rom for MIUI 10 (10.3.16) and then ran into boot looping.
So then I got into TWRP and erased all data and then tried to copy over the old update file and realized I can't copy over anything even with MTP Enabled.
All the folders in the sdcard are random letters and numbers..
So now I can't send any files over and im stuck wondering how to fix this problem and then go over to Pixel Experience.
Send help! Please!
You messed up with encryptions... Just flash Chinese fastboot rom before pixel experience... and, as always, don't forget: DO NOT lock your bootloader ..
thiagodark said:
You messed up with encryptions... Just flash Chinese fastboot rom before pixel experience... and, as always, don't forget: DO NOT lock your bootloader ..
Click to expand...
Click to collapse
And I would do that by downloading which version of fastboot? Any stable one that I want to run?
Also would it be through fastboot using Mi Flash Tool or something else?
Then the pixel experience would be installed just through TWRP?
Sorry, I just don't wanna mess up.
originalwill23 said:
And I would do that by downloading which version of fastboot? Any stable one that I want to run?
Also would it be through fastboot using Mi Flash Tool or something else?
Then the pixel experience would be installed just through TWRP?
Sorry, I just don't wanna mess up.
Click to expand...
Click to collapse
As you want to flash pixel experience, you need to flash chinese fastboot rom, because pixel experience is based on Chinese firmware. So, by flashing Chinese you will be half way. Pick last stable pie version.. I believe is 10.3.16, don't remember...
Yes. You should use miflash tool, just don't forget: you need to select "clean all" and not "clean all and lock".
Boot into miui system once.
After that just flash twrp through normal fastboot command, as you already did in the past. Then flash PE in twrp...
Remember to boot in twrp just after flash it, if you boot into device it will be replaced by stock one...
thiagodark said:
As you want to flash pixel experience, you need to flash chinese fastboot rom, because pixel experience is based on Chinese firmware. So, by flashing Chinese you will be half way. Pick last stable pie version.. I believe is 10.3.16, don't remember...
Yes. You should use miflash tool, just don't forget: you need to select "clean all" and not "clean all and lock".
Boot into miui system once.
After that just flash twrp through normal fastboot command, as you already did in the past. Then flash PE in twrp...
Remember to boot in twrp just after flash it, if you boot into device it will be replaced by stock one...
Click to expand...
Click to collapse
@originalwill23
After booting into TWRP and before flashing PE, wipe cache and dalvik, then format data. Either reboot into TWRP, or unmount and mount data, then carry on with the PE flashing.
Robbo.5000 said:
@originalwill23
After booting into TWRP and before flashing PE, wipe cache and dalvik, then format data. Either reboot into TWRP, or unmount and mount data, then carry on with the PE flashing.
Click to expand...
Click to collapse
@Robbo.5000
That sounds confusing..
So after flashing the chinese fastboot and starting the phone up once to confirm its working, i boot into twrp and wipe cache+dalvik, then format all data, then restart into twrp and flash pe?
Doing that is just making sure its a clean flash and not a dirty one?
originalwill23 said:
@Robbo.5000
That sounds confusing..
So after flashing the chinese fastboot and starting the phone up once to confirm its working, i boot into twrp and wipe cache+dalvik, then format all data, then restart into twrp and flash pe?
Click to expand...
Click to collapse
You boot into MIUI once to let it finalise the installation.
Then install TWRP and immediately boot into TWRP.
When changing ROMs you should clean flash, which normally means wiping cache, dalvik and data before installing the new ROM.
In this case it's best to format data instead, otherwise you may get problems with encryption, similar to what your seeing now.
After formatting data, TWRP sometimes has a problem seeing the data partition properly, to fix this you either reboot into TWRP or go to the mount menu and unmount data, then mount it again.
After this you copy the PE ROM onto the phone and flash it.
Robbo.5000 said:
You boot into MIUI once to let it finalise the installation.
Then install TWRP and immediately boot into TWRP.
When changing ROMs you should clean flash, which normally means wiping cache, dalvik and data before installing the new ROM.
In this case it's best to format data instead, otherwise you may get problems with encryption, similar to what your seeing now.
After formatting data, TWRP sometimes has a problem seeing the data partition properly, to fix this you either reboot into TWRP or go to the mount menu and unmount data, then mount it again.
After this you copy the PE ROM onto the phone and flash it.
Click to expand...
Click to collapse
I successfully got everything up and running in PE and im loving it. Thanks!!
Hi togehter,
I had some problems with flashing new custom roms and ended up in a bootloop with not being able to boot to recovery. This could be solved by flashing the stock image with the xiaomi flash tool.
Before I will fu up again I would like to bring some light into the darkness.
When coming from Stock Rom:
1. Unlock Bootloader -> done successfully
2. Flashed TWRP Recovery -> done successfully but storage (data) was encrypted
3. Flashed Magisk via Recovery -> done successfully (storage still encrypted)
from here I was happy using the Stock Rom with Root.
Now I started messing things up:
Because there are a few things that bother me about the stock rom i wanted to use lineageOS/Pixel Experience. So I proceeded as following:
1. Backup my data (still have to enter key when starting twrp to decrypt the storage) -> done successfully
2. Flash LineageOS -> resulted in bootloop to TWRP
When entering twrp there was no query about the key and data where encrypted. Also the Backup was not accessible .
3. I used all in one tool to erase storage and decrypt data. -> successfully... Now i was able to place data on the internal storage again and start flashing a rom
4. Flashing LineageOS -> done successfully and able to boot into rom
Back to TWRP data was encrypted and I had to enter key.
5. Flashing remove force encryption script via twrp. -> done but now i was facing boot to black screen. TWRP was not working anymore.
Only way to get it work again, was flashing stock image.
Why is the data system always encrypted. This is rly annoying and backups don't work, because i can not encrypt them. Also, I can not put any files on the memory because it is encrypted.
I would rly like to try a custom rom, but I would also like to be able to go back to a backup. What have i done wrong?
You have to flash no dm verify right after formatting data & flashing rom. Don't let it boot.
I would recommend using the stock firmware. Los/AOSP is rubbish for our device, it's too unstable, lacking features and has worse gestures.
SeppGoPro said:
Hi togehter,
.... What have i done wrong?
Click to expand...
Click to collapse
You need to format data (not just wipe data) in TWRP. Some people suggest before flashing a ROM and some say after, but I don't think it makes a great deal of difference either way.
Make sure you either flash the appropriate firmware and vendor recommended, or the fastboot ROM of that version.
Then in TWRP wipe cache and dalvik, then format data.
Reboot into TWRP, or unmount and mount the data partition in TWRP so it correctly reads the data partition.
Copy across the ROM (and GApps if needed)
Them flash.
Boot into the ROM and you should be good.
After initial setup, if you want root, boot into TWRP and flash Magisk.
From here, if you've set a pin on the ROM, you'll be encrypted, but everything should still work normally. You should be able to access everything normally in TWRP and also perform backups. You should be able to got data across from/to a PC normally.
Turbine1991 said:
You have to flash no dm verify right after formatting data & flashing rom. Don't let it boot.
I would recommend using the stock firmware. Los/AOSP is rubbish for our device, it's too unstable, lacking features and has worse gestures.
Click to expand...
Click to collapse
Not true in many ways.
There is need to flash no dm verity. It's one way of solving the issue, but it's not the only way. You should only do this if you know what it's for and if you know you want this.
AOSP ROMs are not unstable. I've been using them on mine for over 4 months. None are perfect and they have a few minor issues/bugs, but they are far from being considered unstable. I've never had shutdowns, reboots or FC'S.
Thanks for the replies.
Robbo.5000 said:
Make sure you either flash the appropriate firmware and vendor recommended, or the fastboot ROM of that version.
Click to expand...
Click to collapse
So for example with LineageOS 17 I can use the global vendor and firmware, but sometimes in the thread it is recommended to use chinese vendor and firmware. In this case I should flash another vendor and firmware then the global one.
What do you mean with a fastboot rom. How can I identify one of them?
Is the MiuiMix Rom a fastboot rom. This one changed my vendor and firmware. After flashing this rom, my bootlogo changed to redmi... Am i right with this suggestion?
SeppGoPro said:
Thanks for the replies.
So for example with LineageOS 17 I can use the global vendor and firmware, but sometimes in the thread it is recommended to use chinese vendor and firmware. In this case I should flash another vendor and firmware then the global one.
What do you mean with a fastboot rom. How can I identify one of them?
Is the MiuiMix Rom a fastboot rom. This one changed my vendor and firmware. After flashing this rom, my bootlogo changed to redmi... Am i right with this suggestion?
Click to expand...
Click to collapse
Fastboot ROMs are official ROMs that are flashed through the Mi Flash Tool
, with the phone booted into fastboot mode and connected to the PC. They contains almost all partitions, including vendor and all firmware. They will be a .tgz file. They are mainly used as an almost failsafe way to recover the phone, should you mess things up. Flashing them will restore the phone to factory, so will lose TWRP, but you're guaranteed a clean starting point.
If, for example, you want to install Havoc 3, it is recommended to flash it on top of either China or India 10.4 vendor and firmware. So if you're phone is currently on global firmware, you would then need to flash, say, Chinese firmware and vendor flies, before flashing Havoc.
If you have been previously flashing other mods, such as 75Hz, screen refresh rate, for example, then you might choose to flash the official Chinese fastboot ROM, instead of just the firmware and vendor, to ensure that you've cleaned the phone of any mods, etc. In most cases you will be fine flashing firmware and vendor, though.
Miuimix is a custom ROM, which is based on the official China MIUI ROM. Because it's based on the China ROM this is why the logo changed to Redmi.
Robbo.5000 said:
Miuimix is a custom ROM, which is based on the official China MIUI ROM. Because it's based on the China ROM this is why the logo changed to Redmi.
Click to expand...
Click to collapse
So in this case, i can just flash this rom and there is no need of flashing a diffrent vendor or firmware.
So final question: I'm happy with the stock rom plus root. I would like to try a custom rom but I'm not willing to go through the whole installtion procedure again. Is there a way of making a backup and keeping it?
When I backup the stock rom right now, the backup will ne encrypted again...When I formate the data, all my data will be gone again ?
Hey everyone - long time lurker/researcher, but generally good at searching for answers without bugging anyone. This one has me stumped.
I have a Mi 9 CN model (6/128) that has been unable to make phone calls with the main mic without having to toggle Speakerphone on/off
I've tried 3 different custom roms (Xiaomi.eu, Pixel Experience, Evolution), and the Global MIUI 11 rom, but nothing seems to help fix it.
I have the newest version of TWRP installed right now (3.3.1-46), I have tried with and without Magisk installed....right now I don't even have TWRP installed at all on the Global rom.
Same happens for my SO's Mi 9 too as well.
Is there something I'm missing? I've tried turning off WiFi Calling/OK Google detection/VoLTE, rebooted, cleared cache/ cleared data inbetween new ROM installs....
Hardware test shows Main and Top as PASS.
Any tips would be appreciated! I feel like I've tried everything possible.
Thanks in advance~
AZ_Miss_Murder said:
Hey everyone - long time lurker/researcher, but generally good at searching for answers without bugging anyone. This one has me stumped.
I have a Mi 9 CN model (6/128) that has been unable to make phone calls with the main mic without having to toggle Speakerphone on/off
I've tried 3 different custom roms (Xiaomi.eu, Pixel Experience, Evolution), and the Global MIUI 11 rom, but nothing seems to help fix it.
I have the newest version of TWRP installed right now (3.3.1-46), I have tried with and without Magisk installed....right now I don't even have TWRP installed at all on the Global rom.
Same happens for my SO's Mi 9 too as well.
Is there something I'm missing? I've tried turning off WiFi Calling/OK Google detection/VoLTE, rebooted, cleared cache/ cleared data inbetween new ROM installs....
Hardware test shows Main and Top as PASS.
Any tips would be appreciated! I feel like I've tried everything possible.
Thanks in advance~
Click to expand...
Click to collapse
Your TWRP is right.
Try to flash syberia with recommended vendor exactly step by step and of course really clean install with formatted data yes.
If this isn't working I'll think you've got to flash via pc the stock and then again a custom ROM.
Laptapper said:
Your TWRP is right.
Try to flash syberia with recommended vendor exactly step by step and of course really clean install with formatted data yes.
If this isn't working I'll think you've got to flash via pc the stock and then again a custom ROM.
Click to expand...
Click to collapse
I'm actually going to follow the Evolution instructions (just missed the part about flashing EEA)
So i'm using MiFlash with the MIUI11 EEA boot rom file, then I'll do the normal TWRP -> format data -> install Evolution ROM and test.
Thanks!
So it seems like I'm completely out of luck at this point - I've tried basically everything I can think of, and I think something big must be wrong with the phone's file system.
I've followed Evolution's steps to a T (minus MiFlash having an error at the end of the EEA flashing, but the firmware seeming to load fine) and still run into the no Mic issue.
"Flash MIUI11 eea with miflash
Flash vbmeta.img with "fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification" (Download here)
Flash TWRP
Wipe (dont wipe system/vendor)
Format data
Reboot recovery
Flash rom
Reboot system"
Wipe (don't wipe system/vendor) I assume means just a normal factory reset wipe via TWRP, which I've tried.
I've tried both fw+vendor files (the newest for Android 10 and newest from Xiaomi.eu)
Any other last suggestions before I assumed the phone is broken?
Try to flash xiaomi.eu_multi_MI9_9.11.7_v11-10.zip
With miflash and after factory reset.
https://sourceforge.net/projects/xi...iaomi.eu_multi_MI9_9.11.7_v11-10.zip/download
SO! Update here
I was able to use Evolution X's Android 9 instructions to get everything working fine....but everytime I try to duplicate that for MIUI 11 it does not work.
Reboot to recovery
- Flash the latest 9.8.1 vendor image or full stock ROM.
- Reboot to twrp and format data
- Wipe cache/dalvik
- Reboot back to recovery and flash
I tested using the newest Xiaomi.EU Vendor for Android 10 and the stock one with no luck....more thoughts?
Did you try turning off the VoLTE?
Okay. Am currently on MIUI 11.0.3 (the latest one available for RaphaelIN)
So, the problem am facing is that, when i flash a custom rom, my phone gets rebooted to recovery and sometimes to fastboot(this happens occasionally) and i just simply cant get the rom to load.
Sometimes my phone gets into a state which resembles hardbrick (none of the buttons work, even holding the power button for 10secs doesn't) and after sometimes, usually 15 to 20 mins it restarts itself. This has happened thrice till date and all while booting to system.
The Roms i have tried-
-Pixel experience (unofficial) (android Q)
- Lineage OS 17 (unofficial)
- Havoc OS (both official and unofficial) (both pie and Q versions)
-MIUI (European rom)
I have also tried flashing the chinese, indian and global vendor (all done separately) thinking it was a vendor issue, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking was done through the official method and the official app.
Any solutions for this problem and has anyone faced these problems or is it only me?
Astrek said:
Okay. Am currently on MIUI 11.0.3 (the latest one available for RaphaelIN)
So, the problem am facing is that, when i flash a custom rom, my phone gets rebooted to recovery and sometimes to fastboot(this happens occasionally) and i just simply cant get the rom to load.
Sometimes my phone gets into a state which resembles hardbrick (none of the buttons work, even holding the power button for 10secs doesn't) and after sometimes, usually 15 to 20 mins it restarts itself. This has happened thrice till date and all while booting to system.
The Roms i have tried-
-Pixel experience (unofficial) (android Q)
- Lineage OS 17 (unofficial)
- Havoc OS (both official and unofficial) (both pie and Q versions)
-MIUI (European rom)
I have also tried flashing the chinese, indian and global vendor (all done separately) thinking it was a vendor issue, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking was done through the official method and the official app.
Any solutions for this problem and has anyone faced these problems or is it only me?
Click to expand...
Click to collapse
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
You didn't format data that's why your rom doesn't boot. Follow Robbos nice guide and you are good to go.:good:
Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
Thnx for the guide. i will do this within a day or two and update you if it worked or not.
Kollachi said:
You didn't format data that's why your rom doesn't boot. Follow Robbos nice guide and you are good to go.:good:
Click to expand...
Click to collapse
I did format the data partition coz that's one thing I and my friends always do when flashing new rom. I don't exactly remember but i think, the pseudo hardbrick thingy started after i formatted the system, data, cache & internal storage.
I will follow Robbos guide adn keep you guys updated on what happened.
Astrek said:
I did format the data partition coz that's one thing I and my friends always do when flashing new rom. I don't exactly remember but i think, the pseudo hardbrick thingy started after i formatted the system, data, cache & internal storage.
I will follow Robbos guide adn keep you guys updated on what happened.
Click to expand...
Click to collapse
Format data = (you will need to type in "yes")
Note: Format data or wipe data isn't the same thing.
Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
Ohhh *****...!!!! It ****ing worked!!!! Though i made some mistakes like clean all and lock in first step, but was able to unlock bootloader almost instantly, no idea why but i can almost instantly unlock certain mi phone's bootloader instantly. But a lot of thanx for taking your time and writing this up... You really saved me from being stuck in MIUI forever!
A lot of thnx.... and also happy new year... 1st day of 2020 went quite well for me all thnx to you and i hope yours goes well too.!
Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
thanks for help
but no work for me
after flash rom and reboot booting to twrp auto..
Kollachi said:
Format data = (you will need to type in "yes")
Note: Format data or wipe data isn't the same thing.
Click to expand...
Click to collapse
many times the tiniest msg has the greatest significance. thanks mate!!!
Guys i need your help,, i flashed my phones custom Rom tecno 7cs using sp flashing tool.
That worked and it showed the tick icon on my pc.
The problem is that it does nothing to my phone because the software issues are still there
my phone keeps restarting itself almost all the time and sometimes won't even boot it takes longer to boot,,, apps keep on crushing and many more.AM tired am going to break it and throw it if i don't get solutions asap!
So the flashing process only wiped data on the phone nothing else whatsoever.
tecno 7cs p121 Bi safaricom ke 20151111