Related
Recently i'm just update the Huawei android version, but after restarted the phone, it's keep stuck on the manufacturer logo, unable boot into the main screen.
I did try to press Volume key + and Power unfortunately unable to enter the recovery mode, please help.
Send it to service
If you haven't unlocked the bootloader/installed TWRP/Rooted, then yes I'd agree with the above comment and send to service.
Otherwise follow the instructions here.... https://forum.xda-developers.com/p10/help/tutorial-recovering-p10-p10-brick-t3600211
amonev said:
Send it to service
Click to expand...
Click to collapse
I'd asked the service center but they said will wipe my data, is there anyway to retrieve the data back？
Just for understanding: Did you unlock your Bootloader?
Jannomag said:
Just for understanding: Did you unlock your Bootloader?
Click to expand...
Click to collapse
No, i didnt unlock bootloader.
Did someone managed to fix that? I have same problem.
I used hisuite to install pie update on my p10 and it started bootlooping.
Button combinations for fastboot, factory reset etc dont work, cant even shut down phone unless disconecting battery from the motherboard.
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
sayfsami said:
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
Click to expand...
Click to collapse
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
zgfg said:
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
Click to expand...
Click to collapse
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
sayfsami said:
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
Click to expand...
Click to collapse
eRecovery is different from Recovery (I wrote above the phone to be connected to charger while booting with Vol+ kept pressing; in Recovery there is no option for Installing the latest - but the option is present in eRecovery), but anyway, you probably cannot boot to eRecovery either ;(
It could be also possible to reinstall firmware from HiSuite but you could not connect if you cannot boot
For flashing from Fastboot, you must have Bootloader and FRP unlocked (but to unlock, you must first boot to the system)- if I understood correctly, you didn't play with Bootloader, Fastboot, flashing, etc yet, hence your FRP and BL are locked
Uhm can anyone help me? pls. I unlocked my bootloader and flashed open kirin AEX P1 Beta and it caused me bootloop maybe because I fail to factory reset the second time or at least can I reflash the custom rom to make it work again but I can't access my p10 on fastboot
Hello, I have a SM-N920P with a custom FRP (FAP) Lock. I searched every forum and videos on YouTube to find out how I can unlock my phone. Most of the people downgrade the phone into 5.1.1 (Lolipop) or 6.0.1 (Masrshmellow) and the phone should boot to normal. However, I've used latest Odin (3.12) or Z3X Tool v27.2, and I cannot able to disable the FRP lock. I tried to used Z3X to disable the locked, but it kept saying "Searching Samsung USB Flash Interface... detected COM4
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... OK
Erasing Reactivation lock... error
Done with Samsung Tool PRO v.27.2"
Besides the FRP lock, I am unable to downgrade or using the stock ROM to flash the phone, it kept saying error and fail with various attempts. HOWEVER, I am able to flash my phone using the latest 7.0 Nougat (DQE1), and (DQC5). Yet, the phone keeps booting on a loop with a Samsung logo. This is a really rare case and I need anybody know more experience than me can help. Please reply ASAP and I'm looking forward for your reply. Thank you.
After flashing the stock 7.0 nougat. If it is in bootloop for 5-10 minutes. Power off your device. Go into recovery. Do a factory reset. Restart device.
Did you have any mods? I had the same problem yesterday. OEM Unlock was getting turned off and I don't know why. Just do a factory reset as the user above me said. Odin will not allow you to downgrade.
________
Hey, my phone is Sprint, too. My phone was getting the FRP lock after a few reboots. I have done several mods like TWRP, root by the latest Magisk, deodex, edge panels, csc tweaks...etc. The FRP lock debacle was on the newest Sprint build wich is DQF1. I downgraded to DQE1 and I noticed that OEM unlock was disabled. I guess that was the problem. In over 9 months of owning this unlocked phone, I didn't touch the OEM unlock. (I'm on a GSM Network)
BTW, OEM Unlock is located in Depeloper Options, to enable it you must enable developer options by going into the menu, search the build number and tap it several times.
Mustafa Jafri said:
After flashing the stock 7.0 nougat. If it is in bootloop for 5-10 minutes. Power off your device. Go into recovery. Do a factory reset. Restart device.
Click to expand...
Click to collapse
cachanilla86 said:
Did you have any mods? I had the same problem yesterday. OEM Unlock was getting turned off and I don't know why. Just do a factory reset as the user above me said. Odin will not allow you to downgrade.
________
Hey, my phone is Sprint, too. My phone was getting the FRP lock after a few reboots. I have done several mods like TWRP, root by the latest Magisk, deodex, edge panels, csc tweaks...etc. The FRP lock debacle was on the newest Sprint build wich is DQF1. I downgraded to DQE1 and I noticed that OEM unlock was disabled. I guess that was the problem. In over 9 months of owning this unlocked phone, I didn't touch the OEM unlock. (I'm on a GSM Network)
BTW, OEM Unlock is located in Depeloper Options, to enable it you must enable developer options by going into the menu, search the build number and tap it several times.
Click to expand...
Click to collapse
Thank you, based on what you guys saying, I understand that Samsung won't let you downgrade. I able to boot up 7.0 Nougat firmware to the phone (DQE1), and (DQC5). However, I keep getting bootloop after using Odin to flash the phone, and FRP lock is still on. Is there any tickmarks on ODIN that I have to check such as "Nand erase", "Auto reboot", "Flash lock", "F-reset time" or anything in the tickmarks? Then, I couldn't access to the recovery mode (vol up + home + power ) after odin sucessful flashed my phone. Is it because I got stuck in a bootloop and I cannot turn off my phone? I tried to took the battery off so the phone can be turn off, then when I tried to go to recovery mode, it's a bootloop again...Please help, I'll try different ways in order to get the phone to work again. Thank you.
PhuGamer said:
Thank you, based on what you guys saying, I understand that Samsung won't let you downgrade. I able to boot up 7.0 Nougat firmware to the phone (DQE1), and (DQC5). However, I keep getting bootloop after using Odin to flash the phone, and FRP lock is still on. Is there any tickmarks on ODIN that I have to check such as "Nand erase", "Auto reboot", "Flash lock", "F-reset time" or anything in the tickmarks? Then, I couldn't access to the recovery mode (vol up + home + power ) after odin sucessful flashed my phone. Is it because I got stuck in a bootloop and I cannot turn off my phone? I tried to took the battery off so the phone can be turn off, then when I tried to go to recovery mode, it's a bootloop again...Please help, I'll try different ways in order to get the phone to work again. Thank you.
Click to expand...
Click to collapse
You dont need to take out the battery. In note 5 you can power off the device by pressing Power button + Volume down button at the same time.
Do a factory reset using recovery.
Mustafa Jafri said:
You dont need to take out the battery. In note 5 you can power off the device by pressing Power button + Volume down button at the same time.
Do a factory reset using recovery.
Click to expand...
Click to collapse
Thank you. You made it sound so easy. I able to turn off the phone, but I still cannot access to the recovery mode. Is it vol up + power button + home for recovery? That's what I do after flash the phone, turn it off, and still a boot loop. FRP still on if I go back to download mode. Are you sure my tickmarks on ODIN is right? Heres a link for the pic: ibb.co/fHwwVF
PhuGamer said:
Thank you. You made it sound so easy. I able to turn off the phone, but I still cannot access to the recovery mode. Is it vol up + power button + home for recovery? That's what I do after flash the phone, turn it off, and still a boot loop. FRP still on if I go back to download mode. Are you sure my tickmarks on ODIN is right? Heres a link for the pic: ibb.co/fHwwVF
Click to expand...
Click to collapse
You dont need nand erase. Anyways seems like it wasnt the issue.
Power off device (Power + Volume Down)
Recovery (Power + Volume Up + Home)
Factory Reset.
Maybe try to flash again with only Auto Reboot and F. Reset Time TICKED.
Mustafa Jafri said:
You dont need nand erase. Anyways seems like it wasnt the issue.
Power off device (Power + Volume Down)
Recovery (Power + Volume Up + Home)
Factory Reset.
Maybe try to flash again with only Auto Reboot and F. Reset Time TICKED.
Click to expand...
Click to collapse
I tried multiple attempts but it doesn't work. Bootloop even though I tried to put into recovery mode. Nothing happend. Is it because of FRP lock? Or do I have to switch the rom or anything in the phone?
PhuGamer said:
I tried multiple attempts but it doesn't work. Bootloop even though I tried to put into recovery mode. Nothing happend. Is it because of FRP lock? Or do I have to switch the rom or anything in the phone?
Click to expand...
Click to collapse
Did you try flashing stock rom again? Tick only Auto Reboot and F. Reset time in Odin.
And keep in mind one thing. The first boot takes about 4-5 minutes.
Try flashing stock rom again if its still in bootloop then try going in recovery mode and do a factory reset.
If it still doesnt work then maybe I can help you through skype video.
Yea, I tried stock rom Nougat 7.0 for my N920P. Matter of fact, I tried to use other 7.0 firmware for the device but still the same. I can't downgrade like you mention. I continue to get bootloop, and I still cannot access to recovery mode no matter how I tried. It would be wonderful If you can do skype video.
PhuGamer said:
Yea, I tried stock rom Nougat 7.0 for my N920P. Matter of fact, I tried to use other 7.0 firmware for the device but still the same. I can't downgrade like you mention. I continue to get bootloop, and I still cannot access to recovery mode no matter how I tried. It would be wonderful If you can do skype video.
Click to expand...
Click to collapse
ok pm me your skype
hi there
I have problem with my phone
want to flash a custom rom on it and nothing knew about Ome lock and frp lock
wipe my phone with factory reset and now cant boot my phone because it need my google account and I forgot that my id Even cant flash custom recovery!
please help me I need my phone
On YouTube there should be a tutorial to help you, sure you find it because you only have to do a bypass.
If it says with red letters on top of the screen "FRP Lock" or something like that.
DONT BE AFRAID, i had that once and i almost thought my phone got bricked.
Steps:- 1) Press Power and Volume Down together
2) When it turns off, quickly press Volume Down, Home Button & Power together
3) It should go to download mode/odin mode
4) Go to updato.com, download your model firmware and odin
5) Flash it via odin (Put the firmware in AP) (Odin will freeze for a couple of min)
6) Start and wait
7) Done, you have a brand new phone (could possibly wipe data)
Atleast, thats what i did
Can you please help how to get out Custom binary recovery blocked by frp lock screen. On my note 9. I tried power home blitz down or up. Or power up/ down blitz I can not get out of this screen. Please help. I can not get out of this screen. The laptop don’t recognize the usb also.
Can you please help my note 9 uk says Custom binary recovery blocked by frp lock .
https://imgur.com/a/hHhaWZA
Help please
Now my laptop won’t recognize the usb and I can’t get out of this loop. Can you please help how to fix this. I have pressed the buttons wonts take me out from this screen
Title says it all. But for those that want to know a bit more in detail about what's going on, I tried to install this custom ROM: https://forum.xda-developers.com/t/rom-oneui-2-5-twrp-ncx-2-5-for-a71-sm-a715f.4174135/ Clearly I did something wrong (a bit more clarification in that guide would help people not used to rooting an Android device getting through that process easier), so now I want to go to square 1 by installing the stock ROM again. But the thing is, after installing multidisabler through TWRP, the phone is not permanently stuck into a bootloop and now I can't even go into safemode, nor download mode, and I can't enter the recovery mode, the only thing my phone is capable of doing is to restart by itself by holding the volume down and the power buttons at the same time, and now ADB nor Fastboot can't detect my device (the PC does a Samsung device being connected though, so it's not a hardbrick, I guess).
Samsung devices do not use Fastboot. You should restore through Odin instead.
Try the following:
1. Download Odin on your computer, you can get it from here. Extract it into a folder.
2. Download the firmware for your device. Find out your device model first and then look on http://samfw.com, I've downloaded from there a lot in the past, it works great.
3. Extract the firmware, you should get five files: AP, BL, CP, CSC, and HOME_CSC.
4. Make sure your device is powered off, and press power + volume down + bixby. You should be asked to confirm you want to enter download mode, press the volume up button.
5. Plug your device into the computer, then select the files for all the slots. Use CSC, not HOME_CSC for CSC (CSC is for fresh restore, HOME_CSC is for software update).
6. A device should show in the top bar, something like [COM:6]. This means your device is connected. If it isn't there, make sure your device is plugged in and in Download Mode.
7. Click flash. The firmware should start to flash and there should be a progress bar in Download Mode. Once it's finished your device should reboot into the system.
ChasTechProjects said:
Samsung devices do not use Fastboot. You should restore through Odin instead.
Try the following:
1. Download Odin on your computer, you can get it from here. Extract it into a folder.
2. Download the firmware for your device. Find out your device model first and then look on http://samfw.com, I've downloaded from there a lot in the past, it works great.
3. Extract the firmware, you should get five files: AP, BL, CP, CSC, and HOME_CSC.
4. Make sure your device is powered off, and press power + volume down + bixby. You should be asked to confirm you want to enter download mode, press the volume up button.
5. Plug your device into the computer, then select the files for all the slots. Use CSC, not HOME_CSC for CSC (CSC is for fresh restore, HOME_CSC is for software update).
6. A device should show in the top bar, something like [COM:6]. This means your device is connected. If it isn't there, make sure your device is plugged in and in Download Mode.
7. Click flash. The firmware should start to flash and there should be a progress bar in Download Mode. Once it's finished your device should reboot into the system.
Click to expand...
Click to collapse
Well, trying to reflash everything through Odin has been a thing I tried to do, but how am I supposed to shutdown a phone that is stuck at the Samsung logo (is there any combination to shutdown a Samsung during the boot process?)? And even after that, how am I supposed to press "power + volume down + bixby" if both the power and bixby buttons are the same buttons?
racer21 said:
Well, trying to reflash everything through Odin has been a thing I tried to do, but how am I supposed to shutdown a phone that is stuck at the Samsung logo (is there any combination to shutdown a Samsung during the boot process?)? And even after that, how am I supposed to press "power + volume down + bixby" if both the power and bixby buttons are the same buttons?
Click to expand...
Click to collapse
Long press vol+,vol- and power and in the same time plug in in your pc
geekmaster21 said:
Long press vol+,vol- and power and in the same time plug in in your pc
Click to expand...
Click to collapse
I tried entering Download Mode hours ago, but to no avail. Even before flashing mutidisabler through TWRP (and thus, the phone was working), I had to use ADB in order to make my phone be able to enter Recovery Mode, since the combo for recovery and download mode just made my phone make a loud noise and restart my phone onto safe mode.
Ok, here's an update, apparently pressing those buttons, makes the screen have the same, but at least Odin recognizes the drive, but now I'm stuck at this error: "Complete(Write) operation failed."
Something's weird here, I'm 99.9% sure I did activate USB debugging for this phone, although that was just before wiping the entire drive before the phone got stuck in this loop.
Fixed. Many thanks to @hainguyenthao for helping me out ^^
racer21 said:
Title says it all. But for those that want to know a bit more in detail about what's going on, I tried to install this custom ROM: https://forum.xda-developers.com/t/rom-oneui-2-5-twrp-ncx-2-5-for-a71-sm-a715f.4174135/ Clearly I did something wrong (a bit more clarification in that guide would help people not used to rooting an Android device getting through that process easier), so now I want to go to square 1 by installing the stock ROM again. But the thing is, after installing multidisabler through TWRP, the phone is not permanently stuck into a bootloop and now I can't even go into safemode, nor download mode, and I can't enter the recovery mode, the only thing my phone is capable of doing is to restart by itself by holding the volume down and the power buttons at the same time, and now ADB nor Fastboot can't detect my device (the PC does a Samsung device being connected though, so it's not a hardbrick, I guess).
Click to expand...
Click to collapse
I'm sorry to hear that you had trouble installing the ROM and I'm glad you were able to fix it.
I unfortunately can't see a way that I could make the tutorial on how to install the ROM any easier. I'm almost certain I covered all my bases going over the perquisites and how to install the ROM. I also have a Telegram group in that thread so that users can join if they are ever stuck in any of the steps so that either me or other users that have successfully installed the ROM can help people in doubt since I'm not available 100% of the time. If you ever decide to give it a try again, don't be shy, you can always join the group and request for help.