When i connect my device to usb, nothing happens.
I looked up the forum for solutions, but was unable to find them.
It shows nothing in network connections, nothing in device manager, en activesyc shows nothing at all.
I tried the following:
- Other USB cable/port
- Reinstall activesync or use older version.
- Uncheked advanced networking in my device.
- Turned off firewall
I cant think of any other solutions at this time, maybe someone can help me.
(sorry for my bad English, i'm Dutch)
Ciao,
did you try to remove your older connection from your telephone? I mean programs -> system tools -> activesync -> menu -> options -> delete existing connections.
This works for me whenever i have some connection problems.
No luck =(
Still the same
No one has any idea?
Reboot the PC. Make sure you check Device Manager for any issues. Maybe disconnect all USB peripherals and then try the phone first. Did you try a different machine (PC)?
kimtyson said:
Reboot the PC. Make sure you check Device Manager for any issues. Maybe disconnect all USB peripherals and then try the phone first. Did you try a different machine (PC)?
Click to expand...
Click to collapse
yes, i tried 3 machines.
But the problem is, the devices is reconized by none of them
What is the operating system of your pc´s
Windows XP sp3???
If so there are some issues that relates to sp3 but i dont know any resolution for it thou.
Nope, fully updated SP2
The HTC proprietary extUSB connector on the bottom of the TyTN II has been known to fail in a few cases (if you search in this forum there are many posts about it). When you plug in the charger or wired headphones do these work fully? Does your battery charge when connected to a PCs USB port? Not that these are 100% foolproof tests because different pins are used for the USB signal connection. What changes did you make or incidents occurred before this problem occurred e.g. started using a different charging cradle etc? Have you inspected the connector for damage and tried the original HTC cable?
Flying Kiwi said:
The HTC proprietary extUSB connector on the bottom of the TyTN II has been known to fail in a few cases (if you search in this forum there are many posts about it). When you plug in the charger or wired headphones do these work fully? Does your battery charge when connected to a PCs USB port? Not that these are 100% foolproof tests because different pins are used for the USB signal connection. What changes did you make or incidents occurred before this problem occurred e.g. started using a different charging cradle etc? Have you inspected the connector for damage and tried the original HTC cable?
Click to expand...
Click to collapse
The battery still charges via USB (via my pc), i used a charger in my car.
This is a USBport in the car, difficult to explain.
http://cdn.overstock.com/images/products/L10369942.jpg
I can't tell you of my headphone works, because i lost it.
I can't dectect any damage to my USB port.
Update:
I've been looking at my USB port on mt PDA, and did a little bending, now when i connect my device, the screen flips to horizontal view.
So i guess the problem has to do with the USB connector after all.
Upd: OMG :O it keeps flipping from horizontal to vertical, even when it's not plugged in.
addict1337 said:
i used a charger in my car.
This is a USBport in the car, difficult to explain.
Click to expand...
Click to collapse
Be careful about using just any old car charger system. If you search this forum you'll see that there was one model which could damage the TyTN II due to overloading the UBS port on it (something to do with reverse flow under periods of heavy electrical load). I believe that model was subsequently modified to prevent this problem but it doesn't mean other car chargers with the same affliction wont arrive on the scene. Maybe it's time to hard reset the device and if it still plays up, return it to the supplier for a warranty claim.
Flying Kiwi said:
Be careful about using just any old car charger system. If you search this forum you'll see that there was one model which could damage the TyTN II due to overloading the UBS port on it (something to do with reverse flow under periods of heavy electrical load). I believe that model was subsequently modified to prevent this problem but it doesn't mean other car chargers with the same affliction wont arrive on the scene. Maybe it's time to hard reset the device and if it still plays up, return it to the supplier for a warranty claim.
Click to expand...
Click to collapse
=(
I have insurance on my phone.
Maybe i'll contact them then.
Thanks for the help!
My Sprint Flex is unable to connect to PC. I am only able to browse files through wireless storage mode. However, the phone charges fine when connected to the PC. I am on ZV6 rooted firmware presently. Do you think this could be a software or a hardware problem? Please help me out with your valuable suggestions.
Try a different cable. I had the exact same issue and a new cable fixed it right up.
Thanks. Will do so right away.
Tried several cables. Phone connects erratically. Mostly it doesn't connect at all. Please help with your valuable inputs.
If you have PC, try to find mainboard model, and find a software for it that boosts power through the USB. That software enables Apple stuff to be charged over PC USB, and will provide you probably better stability. For my GA mobo its On/Off Charge, every manufacturer has their own version.
I also had problems with G Flex on some external USB ports.
I have researched the issue of my Note 5just being able to slow charge via USB, and not be able to do anything else. I have tried all the proposed solutions I found, but can not fix the issue. The things that I have noticed to not work are:
Fast Charge: Cable and USB charging is detected, but cannot fast charge. I have tried the same charger and cable on other S7 edge, and it able to Fast charge. Fast charging is enabled in the battery menu
Connect to PC: Whenever connected to any PC, the PC shows “USB Device Not Recognized." I have the latest version of Smart Switch and the latest drivers. I have tried multiple computers and windows 7, 8 and 10. I have also tried to connect to the PC when the phone is in Download and Recovery mode and get the same error.
Connect to any OTG peripheral: Nothing is detected by the Note 5. Same cable working on other device.
Connect to Gear VR: When connecting to Gear VR, it gives the chime, the black screen with the little x in the corner appears for a second and then it goes back to the home screen.
What I have tried to do to fix:
Different cables/chargers/USB ports
Checked if any of the 5 pins are broken in the cable
I have lifted the tongue of the charging port in the phone via tooth pick
Done a factory reset
Any insight on this issue would be appreciated.
Thanks
musab_bari said:
I have researched the issue of my Note 5just being able to slow charge via USB, and not be able to do anything else. I have tried all the proposed solutions I found, but can not fix the issue. The things that I have noticed to not work are:
Fast Charge: Cable and USB charging is detected, but cannot fast charge. I have tried the same charger and cable on other S7 edge, and it able to Fast charge. Fast charging is enabled in the battery menu
Connect to PC: Whenever connected to any PC, the PC shows “USB Device Not Recognized." I have the latest version of Smart Switch and the latest drivers. I have tried multiple computers and windows 7, 8 and 10. I have also tried to connect to the PC when the phone is in Download and Recovery mode and get the same error.
Connect to any OTG peripheral: Nothing is detected by the Note 5. Same cable working on other device.
Connect to Gear VR: When connecting to Gear VR, it gives the chime, the black screen with the little x in the corner appears for a second and then it goes back to the home screen.
What I have tried to do to fix:
Different cables/chargers/USB ports
Checked if any of the 5 pins are broken in the cable
I have lifted the tongue of the charging port in the phone via tooth pick
Done a factory reset
Any insight on this issue would be appreciated.
Thanks
Click to expand...
Click to collapse
Have you tried different 2A charging bricks? A regular 1A charger would still take a long time to fully chargeNote5.
You could also be looking a bad USB-port or a faulty battery, both of which would be covered under warranty provided no large physical damage is evident on your device.
Thanks for the reply. I have tried the original Samsung charger, 2A, 1A, and 0.5A charging bricks, but the phone shows either Cable or USB charging.
About the faulty battery, will that cause the PC and other peripherals to not detect the phone?
musab_bari said:
I have researched the issue of my Note 5just being able to slow charge via USB, and not be able to do anything else. I have tried all the proposed solutions I found, but can not fix the issue. The things that I have noticed to not work are:
Fast Charge: Cable and USB charging is detected, but cannot fast charge. I have tried the same charger and cable on other S7 edge, and it able to Fast charge. Fast charging is enabled in the battery menu
Connect to PC: Whenever connected to any PC, the PC shows “USB Device Not Recognized." I have the latest version of Smart Switch and the latest drivers. I have tried multiple computers and windows 7, 8 and 10. I have also tried to connect to the PC when the phone is in Download and Recovery mode and get the same error.
Connect to any OTG peripheral: Nothing is detected by the Note 5. Same cable working on other device.
Connect to Gear VR: When connecting to Gear VR, it gives the chime, the black screen with the little x in the corner appears for a second and then it goes back to the home screen.
What I have tried to do to fix:
Different cables/chargers/USB ports
Checked if any of the 5 pins are broken in the cable
I have lifted the tongue of the charging port in the phone via tooth pick
Done a factory reset
Any insight on this issue would be appreciated.
Thanks
Click to expand...
Click to collapse
Same happened to me two days ago. I restored an old backup, done a factory reset and restored my actual rom again and problem solved. Idk what the problem was related to. Try wiping cache again, maybe it helps.
mansillaluis said:
Same happened to me two days ago. I restored an old backup, done a factory reset and restored my actual rom again and problem solved. Idk what the problem was related to. Try wiping cache again, maybe it helps.
Click to expand...
Click to collapse
I have done a wipe from TWRP, but the issue was not fixed. I can not change ROMs etc as I can not connect the Note 5 to the PC via USB cable, even in TWRP.
Was your phone just not Fast Charging, or it wasn't being recognized by the PC, etc.
Thanks
Actually y have the same problem, unfortunately I don't have root access.
Try the app called USB host check, maybe they can help you.
Is not possible to me because the PC don't detect the phone connection and obviously I can't make the root.
musab_bari said:
I have researched the issue of my Note 5just being able to slow charge via USB, and not be able to do anything else. I have tried all the proposed solutions I found, but can not fix the issue. The things that I have noticed to not work are:
Fast Charge: Cable and USB charging is detected, but cannot fast charge. I have tried the same charger and cable on other S7 edge, and it able to Fast charge. Fast charging is enabled in the battery menu
Connect to PC: Whenever connected to any PC, the PC shows “USB Device Not Recognized." I have the latest version of Smart Switch and the latest drivers. I have tried multiple computers and windows 7, 8 and 10. I have also tried to connect to the PC when the phone is in Download and Recovery mode and get the same error.
Connect to any OTG peripheral: Nothing is detected by the Note 5. Same cable working on other device.
Connect to Gear VR: When connecting to Gear VR, it gives the chime, the black screen with the little x in the corner appears for a second and then it goes back to the home screen.
What I have tried to do to fix:
Different cables/chargers/USB ports
Checked if any of the 5 pins are broken in the cable
I have lifted the tongue of the charging port in the phone via tooth pick
Done a factory reset
Any insight on this issue would be appreciated.
Thanks
Click to expand...
Click to collapse
I have the same issue tried the same fixes. No luck. Have you found a solution please?
I ultimately had to change the motherboard. Changing the charging port did nothing.
However, I suspect it was a corrupted firmware. If you can somehow flash a latest stock firmware and check, that would be great.
In trying to fix the firmware I had corrupted Stock ROM. Since I could only use WiFi to transfer files via WiFi FTP type apps, and I didn't have a working ROM backup on my phone, after the Stock ROM was corrupted, I could not upload any new files to flash with TWRP so I had to change the motherboard.
musab_bari said:
I ultimately had to change the motherboard. Changing the charging port did nothing.
However, I suspect it was a corrupted firmware. If you can somehow flash a latest stock firmware and check, that would be great.
In trying to fix the firmware I had corrupted Stock ROM. Since I could only use WiFi to transfer files via WiFi FTP type apps, and I didn't have a working ROM backup on my phone, after the Stock ROM was corrupted, I could not upload any new files to flash with TWRP so I had to change the motherboard.
Click to expand...
Click to collapse
Hi, i have the same issue as you, i'm currently thinking try to fix this by replacing the usb charging port circuit board, you think this should work or not??
lotharient said:
Hi, i have the same issue as you, i'm currently thinking try to fix this by replacing the usb charging port circuit board, you think this should work or not??
Click to expand...
Click to collapse
If you see the "USB Device Not Recognized" message when you connect to the PC, then I think the charging port is fine. It is some issue with the firmware as phone is not able to provide the correct PID and VID to the peripheral devices to identify itself. The charging port and its circuit doesn't hold that info. If possible, try to flash a stock firmware from TWRP as ODIN will not work (I am not aware of the exact procedure). Just MAKE SURE you have make a backup of your current setup and leave it on the phone as if you have an unsuccessful flash, you will not be able to use ODIN or ADB as your cable will not work.
musab_bari said:
If you see the "USB Device Not Recognized" message when you connect to the PC, then I think the charging port is fine. It is some issue with the firmware as phone is not able to provide the correct PID and VID to the peripheral devices to identify itself. The charging port and its circuit doesn't hold that info. If possible, try to flash a stock firmware from TWRP as ODIN will not work (I am not aware of the exact procedure). Just MAKE SURE you have make a backup of your current setup and leave it on the phone as if you have an unsuccessful flash, you will not be able to use ODIN or ADB as your cable will not work.
Click to expand...
Click to collapse
I've messed up, I've already clear the cache, Dalvik , Data and System without having backup Rom/firmware in my internal memory. I've try using OTG. Still no hope. Twrp won't regconized it. :crying:
If there no hope to solve this... I think ,I will sell my note5 for replacement parts , sadly.
lotharient said:
I've messed up, I've already clear the cache, Dalvik , Data and System without having backup Rom/firmware in my internal memory. I've try using OTG. Still no hope. Twrp won't regconized it. :crying:
If there no hope to solve this... I think ,I will sell my note5 for replacement parts , sadly.
Click to expand...
Click to collapse
I got into the same problem. I then ordered a replacement motherboard from China and installed it. After that it is working flawlessly.
I'm in same predicament pc won't recognize phone and charging is extremely slow. Attempting to restore old twrp backup or flash older firmware. Crossing fingers
lotharient said:
I've messed up, I've already clear the cache, Dalvik , Data and System without having backup Rom/firmware in my internal memory. I've try using OTG. Still no hope. Twrp won't regconized it. :crying:
If there no hope to solve this... I think ,I will sell my note5 for replacement parts , sadly.
Click to expand...
Click to collapse
Are you still interested in selling the phone?
Same problem but with 2 phones
My note 5 and my friends S6 edge were totally fine, but on our farm (which now i found that has a low voltage eccentricity at around 190 V), we put them on my charger (the original charger that came with the note 5) and both of our phones now have the same problem, they charge very slowly ( up to 6 hrs for a full charge) and are not detected by any pc using 3 cables that work with other phones normally, the charger itself is okay, and works well with other devices (at home of course, and fast charge works with other devices).
I have tried everything, restart, safe mode, delete cache, charge while its off.. with a number of chargers and cables, it does not make any difference.
If any one knows how to fix this, your help is appreciated.
Mine is a little different, My Note5 is not charging at all via USB but works fine with wireless charging. In short, even if i plugged it via PC or via charger, it does not charge anymore.
But I noticed something, when I am in TWRP recovery, my USB OTG drive is readable and when i am in download mode, Odin reconizes the Note5's COM port. I did a reflash of the stock ROM hoping this will do the trick. but it failed. still does not charge at all via USB.
Can anyone help me with this? Thanks in advance. all answers appreciated.
this seems like you have faulty usb port .
So the story is that i got a samsung galaxy note 5 (n920i) with a broken screen from my sister and it worked fine before. A year later i fixed the phone and wiped the files, cache and stuff i noticed that it did not charge with my aftermarket charging cable (battery was at 0%). I thought the cable was screwed so i used an official samsung one and it started charging. once it started up i did all the startup installation process and such but then i noticed that it would not use fast charge (i have an official samsung fast charge socket) even with the fast charge setting on. so i thought to plug it into my pc but it does not recognise it at all. (device descriptor request failed every time) I used many different ports on my pc and laptop, used many aftermarket and official charging cables, i even used it on devices like the gear vr and a docking station and they dont recognise it either.
I found a post saying to push up the tongue in the charging port which did not fix it, i tried all such drivers and fixes thinking its my pc and/or laptop but no luck, like i said i even used devices like docking station and gear vr and both dont recognise it either. So i just thought it may be the charging port its self and purchased a new one to install(i also got a new battery just incase) . After replacing both the charging dock and the battery successfully it still does not work on my pc nor does it charge properly. it is running on the newest update out right now.
edit: I also lost the little white signal cable for the antenna while replacing charge port but i have purchased a new one and its on the way. (if that causes an issue)
I have tried using samsung kies and smart switch with drivers and it does not recognise it either
I dont know what else to do can someone help me figure it out whats wrong.
Thanks
I have the same problem.
Is there any way to root note 5 n920v without pc?
My phone have a problem that does not connect to pc with usb cable, my last hope is to try to install a new firmware.
By research, i think its a software problem.
arturroch said:
Is there any way to root note 5 n920v without pc?
My phone have a problem that does not connect to pc with usb cable, my last hope is to try to install a new firmware.
By research, i think its a software problem.
Click to expand...
Click to collapse
Thats exactly what i think but i dont know how to flash it without a pc
i have same problem...
problem usb unable to recognized
currently my note 5 no os installed, i try flash stock rom using odin but usb not recognized. i also try pendrive otg also unable to detect the pendrive