Database Develop

blue led after fallen in water

Hello everybody. I'm french.
I've a little problem since few days cos my kaiser is fallen in water few seconds.
it run ok. but the blue led for bluetooth is always powered on. I've flahed with a new rom but the problem is always here.
Anybody can help me please ?

Hi my french friend!
I'm italian (o paese do sole e do mare...> acqua) e i've THE SAME problem..THE SAME
Seems a electronic issue ...
an integrated transistor seems shortcut .. flashed some hspl/roms/radios...nothing
I tried with programs to control the LEDs, but do not work (error when starts)
sigh

Hi zorrykid !
I think me to it's a shortcut. I wait and see drying after few days.
We are lucky it's run !

kondorxp said:
...I wait and see drying after few days...
Click to expand...
Click to collapse
try...good luck!
kondorxp said:
We are lucky it's run !
Click to expand...
Click to collapse

My kaiser got wet last summer in the rain. The leds worked quite strangely for couple days, but works fine now.

why do people think its a good idea to turn, or keep, their phone on after dropping it in water. that is usually why it stops working.

purgiaali said:
My kaiser got wet last summer in the rain. The leds worked quite strangely for couple days, but works fine now.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
noodles21o2 said:
why do people think its a good idea to turn, or keep, their phone on after dropping it in water. that is usually why it stops working.
Click to expand...
Click to collapse
Yess'! ahahah
Ok,
I've try some things...
led blue always fixed
1) wifi switched on = strong regular white flashes every second
at the same time
2) BT switched on = blue light emitting small flickering...as if stopped for a infinitesimal moment the blue light..
the electronic part that drives the LED is damaged, always switch on...
Someone can show me pictures of the area below the leds / speaker (photo, link)
Thank you

Yeah!
After more than 4 months my blue LED back to blink again.... incredible!!

Digitizer

Is it normal that my device dont react on 10 points from both sides ?

10 points from both sides? I don't quite get what you mean here, can you elaborate a bit?

why do you need 10 detections at all?

These parts dont work on my device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Mine either.
Fire up a drawing program and try and draw a line that starts at one side and finishes at the other, seems you can't.
Top to bottom is fine though.

Mine is inconsistent. when drawing from middle to left, it usually stops 5-20px from the edge. When drawing from middle to right, it stops 5-15 px from the edge. When drawing from outside left and into middle it starts on 1st pixel, when drawing from outside right into middle, it starts on 2nd-5th pixel.
This may be an explanation why A on qwerty keyboard is sometimes hard for me to hit with my big fingers.....

But, good to know im not alone, yea its hard to hit Q and P for me :/

last time i checked it works fine on stock rom, but on cm7 i cant use those edges either.

v10B stock rom/baseband/kernel all seems fine. well seems atleast.

OK, good to know but there is no Slovak ROM so i dont know what to flash as stock ^_^

That would be Euro Open
Or whatever other ROM you would like to use. There are differences, but there's nothing stopping you from using one not specifically for your country. Some releases may miss your language though..

IEski said:
OK, good to know but there is no Slovak ROM so i dont know what to flash as stock ^_^
Click to expand...
Click to collapse
stock on Slovak O2x is v10b Euro Open... i had that too, but now i have v10d uk, since it should be one of the latest...

IEski said:
These parts dont work on my device
Click to expand...
Click to collapse
I have an unresponsive area on my device as well, but at the bottom only not the sides...
Marked in yellow...

"Red dots" on screen

Hi,
On my watch urbane, I have some red dots on the top of the screen. It's seems to be death pixel, so I tried some app to fix pixels, but it's doesn't work.
Anybody has this issue ? Or know if it's possible to do something ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks you.

johann673 said:
On my watch urbane, I have some red dots on the top of the screen.
Anybody has this issue ?
Click to expand...
Click to collapse
Mine too. I'm sending mine in to LG. Give them a call.

Mine got burnt pixels around october last year.
Wonder how expensive it is to get a fix, but also not sure if there is a reason to proceed as the watch is already not supported.

johann673 said:
Hi,
On my watch urbane, I have some red dots on the top of the screen. It's seems to be death pixel, so I tried some app to fix pixels, but it's doesn't work.
Anybody has this issue ? Or know if it's possible to do something ?
Thanks you.
Click to expand...
Click to collapse
Hello, did you ever figure out a fix by the way? I'm having the same problems in the lower left side of my screen. Ive searched online for days to no avail. Thanks in advance.

johann673 said:
Hi,
On my watch urbane, I have some red dots on the top of the screen. It's seems to be death pixel, so I tried some app to fix pixels, but it's doesn't work.
Anybody has this issue ? Or know if it's possible to do something ?
Thanks you.
Click to expand...
Click to collapse
Welcome to the charm of 1st generation P-OLED display.
Other than replacing the screen, I know of no fix for this.
And, in my experience, the dots will continue to grow.
I started out with 2 tiny dots either side of the "1".
Two years later, From "12" to "2" was pretty much wiped out...

2mm under the status bar

It's really ugly and only MIUI systems has this problem. I don't know why but the officials just ignore fans' complains and keep this 2mm area. Here's a image which I grab from the Internet. For real life using it's more serious than the image shows. It's just really awkward. Till now I know the Chinese official MIUI system has this problem. And MIUI EU fixed this problem since it's made by fans. What about International edition? And is there a way to fix it except from changing system dpi since it will make the font really small?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Use EU dev ROM
xioatan828 said:
It's really ugly and only MIUI systems has this problem. I don't know why but the officials just ignore fans' complains and keep this 2mm area. Here's a image which I grab from the Internet. For real life using it's more serious than the image shows. It's just really awkward. Till now I know the Chinese official MIUI system has this problem. And MIUI EU fixed this problem since it's made by fans. What about International edition? And is there a way to fix it except from changing system dpi since it will make the font really small?
Click to expand...
Click to collapse
My friend changed to EU dev and the problem was fixed.
Im currently using EU dev 8.11.15

hacker738 said:
My friend changed to EU dev and the problem was fixed.
Im currently using EU dev 8.11.15
Click to expand...
Click to collapse
Yeah I Know EU works but some features are different from the officials, and it has other updates other than the status bar, so I might not like it.....

Its up to your decision.
xioatan828 said:
Yeah I Know EU works but some features are different from the officials, and it has other updates other than the status bar, so I might not like it.....
Click to expand...
Click to collapse
Yah, then its your choice, btw EU make their ROM based on Stock Dev, remove sthg and improve sthg.

There's a way in MIUI forum which is said to fix it by changing some system parameter but I tried and didn't work for me....
I just couldn't tolerant this useless area. It wasted me much time and even drives mad

Set the dpi to 365. I played around with the # and found 365 makes the 2mm disappear and sits flush with the notch.

This should help:
https://forum.xda-developers.com/mi-8/themes/root-fit-status-bar-notch-t3838646

General Miui 13.0.2.0 UK .. android 12

Phone popped up with the notification this morning . This looks like android 12 from a quick Google . I'll install it and see what's new ( I'll sacrifice my phone so others won't have too lol ) . Finally we get the update
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

well not a lot seems to have changed . added a few junk apps you can uninstall . stock camera hasn't improved either

Got it also in Belgium. To me it's not changing a lot, something weird is a lot of of notifications and widgets have taken a brownish theme which I do not see where to set it other way

bernardblacksbookshop said:
Phone popped up with the notification this morning . This looks like android 12 from a quick Google . I'll install it and see what's new ( I'll sacrifice my phone so others won't have too lol ) . Finally we get the update
View attachment 5785655
Click to expand...
Click to collapse
Holy foooook-o-rama.... You're right, its out, at long fricken last !!!
I too have got the notification, the update is ready.... I honestly didnt see this coming, and had you not mentioned this, I wouldnt of known / looked. Gave up expecting an update, as Android 14 will be around the corner before we know it....
But just before Christmas, its finally there !!!
So the update went smoothly then, no boot-loops, crashes or whatnot....
Any errors, bugs, audio all fine...??
I shall update mine after Ive had summit to eat...
Cheers, Lister

Actually on further investigation the stock camera does seem a bit better . Video is still 30fps but doesn't look as processed as it did under A11 . Then again that's probably just me lol .
I was as shocked as you lister , thought when I tap on the notification the update will disappear but nope in it went