Cannot transfer my files from my Note8 to Windows 10 - Samsung Galaxy Note 8 Questions and Answers

Hello, everyone.
My Note8 is almost full, and kinda slow. So, before trying to do a clean reinstall and delete the whole phone, I wanted to transfer my files to my laptop.
I have tried by many ways, but the next message appears and it can't transfer a thing (it's attached on the thread).
"Cannot find the requested value"
What does it mean?
It is kind of urgent. I need to do a clean reinstall to upload my work's info and accounts into my Note.
Can anyone help me with that?
Thanks!

Related

Please help a new Kaiser owner, Mac-based

Hello all. Just got my phone on Orange and I like it. I have been a Mac-user for the past 12 years so I am used to not tweaking my gadgets. Can someone explain how I install the CABs onto my Kaiser via either my G5 iMac or my intel Macbook. Many thanks
do'h not very sure, but you might want to try the missing sync, grab the latest version, it now supports win5 and 6. basically that's what you need to synch your mac and PDA, but not very sure if you can install 'em through it though
Now how do I find the installed CAB
OK I have downloaded a CAB onto the Kaiser via Missing Sync. (HTC album mui 0419.cab) So how do I now find it on the phone and activate it or any other CAB?
Thanks again
not that hard
I get that you're new, I am too, but try to figure this stuff out by yourself.
Bluetooth should work for getting files onto the phone (my docs/bluetooth)
When you sync to the phone, the PC version is that you see the phone on the schema/folder tree and can choose where to put it.
When you find the cab file, opening it will install it. Generally try to put system specific things on main memory and things like games on a storage card.
Look at some must have threads to find programs that you like and after you figure it out try a hard reset and reinstall things. That will let you keep a stable device.
As for ROMS, I would be careful of even thinking about flashing on a mac unless you find a thread telling you how to do it, you don't want a bricked device.
Remember to search the forums - it's worth your time.
Just mount the kaiser with missing sync. After that, drag and drop the file to a location that you can remember. Once you do that, just go to the file explorer in the kaiser, locate the file, and click. You should be all set.
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
from what I can remember, Missing Sync is really broken at the moment. (under 10.5).
To install a cab, you just use the tab next to syncronize, what is it, the file tab or somehing?
if it's a .cab, it will be loaded automatically. But make sure there's no spaces/irregular characters on the .cab, otherwise, it won't load the installation, and possibly, the file will not be uploaded at all. I think this is a missing sync bug.
Nope, you're going to have to pull the .CAB out of the .EXE file
jakontil said:
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
Click to expand...
Click to collapse
chenga said:
Nope, you're going to have to pull the .CAB out of the .EXE file
Click to expand...
Click to collapse
hi chenga, mind to point me how to do so? because i am going to lose my XP system very soon

USB Transfer Problem. Help!

Hi all, can anyone sort this -
When i connect via usb i choose 'disk drive' to transfer files/music etc to the phone. Everty time i try to transfer anything it says on the PC (windows xp) 'cannot copy xxxx - the path is too deep'
Has anyone else had any problems or does anyone have any ideas? Thanks
My first reaction is to say that wherever you're trying to copy from or too has a long pathname. Are you trying to copy individual files or whole folders, and where are you trying to copy from/to (e.g. My Documents)?
Dark Fire said:
My first reaction is to say that wherever you're trying to copy from or too has a long pathname. Are you trying to copy individual files or whole folders, and where are you trying to copy from/to (e.g. My Documents)?
Click to expand...
Click to collapse
It doesn't matter how long the filename is it still says it. I've tries individual files and full folders but still the same. And i've tried copying from/to all sorts of different places but still no joy???
Hmmm. Maybe the way that Windows is transferring files is malfunctioning. This is definitely an advanced problem, which requires an expert.
*Waits for expert*
First of all, try another USB port. If that doesn't work, try this, in order. stop after the diamond works:
1- uninstall/reinstall activesync, then try accessing files with it.
2- Stop the Diamond usb drive by clicking the safely remove device icon. Then plug it again.
3- Uninstall all USB Root hub in your windows device manager, then reboot computer.
4- Hard Reset device.
5- Reinstall Windows
6- Return Device.
Can you try moving a file name with 8 chacters or less from your c:\ to the phone? Eg c:\song.mp3 to your phone
Also, what OS are you using? What file system does the phone 'disk' show up as in windows?
someone1234 said:
Can you try moving a file name with 8 chacters or less from your c:\ to the phone? Eg c:\song.mp3 to your phone
Also, what OS are you using? What file system does the phone 'disk' show up as in windows?
Click to expand...
Click to collapse
It shows as fat32. ?
this simply means the files are under a folder tree with too deep or too long with characters. such as:
C:\My Documents and Settings\Andrew Loh\Documents\my structural folders\andrew loh\scanning\pdf\finanacial documents\banking stuff\hong kong bank\bank statement\date 2008-06-09\page 1\200806091211224412.pdf
Simpliest thing first.....take your diamond to another computer.....confirm if it's computer problem or diamond problem
andrewloh said:
this simply means the files are under a folder tree with too deep or too long with characters. such as:
C:\My Documents and Settings\Andrew Loh\Documents\my structural folders\andrew loh\scanning\pdf\finanacial documents\banking stuff\hong kong bank\bank statement\date 2008-06-09\page 1\200806091211224412.pdf
Click to expand...
Click to collapse
Thats not the problem tho. I can't even transfer a file called pic1.jpg!
nokmond said:
Thats not the problem tho. I can't even transfer a file called pic1.jpg!
Click to expand...
Click to collapse
It seems related to FAT system I guess.
Could you try to format the disk from PC when connected as DISK mode and try to copy file or folder again?
This might be helpful.
william_tai said:
It seems related to FAT system I guess.
Could you try to format the disk from PC when connected as DISK mode and try to copy file or folder again?
This might be helpful.
Click to expand...
Click to collapse
Right - i've tried to transfer files from a different pc via 'disk mode' and it worked fine.
I can transfer stuff from mine via active sync but it takes ages transferring albums etc. It must be some setting on my computer causing the problem, although i don't have problems transferring things to sd cards etc. Any ideas?
For the love of God...
Hi All,
This seems like a very old problem but as far as I can tell, was never resolved or someone didn't share their solutions with the rest of us lovely newbies!
Unfortunately for me I am now having the same problem and after searching the forums it led me to this thread (along with two others that didn't have any difinitive answers either). When trying to copy anything that is within a folder from my comp (be it from a partitioned drive or the desktop of the root C: drive) I get the error "Cannot Copy ****ath is too deep".
After much trawling on the internet I found some third party software that should have solved the problem. No such luck , when using that I get a "semaphore timeout error". Next I try to direct extract from a .rar file to the internal memory and it tells me the reason it can't complete is that "the disk may be full".
As it stands now; I've formatted my phone's internal storage (and then had to transfer all programs one by one back over from my comp), enabled DMA transfer from the Device Manager in Windows XP and still no luck at all.
Could someone please shed some light on this as (as you could probably tell by the long winded post) I'm at my wit's end with this despite loving the phone in general!
Cheers in advance,
Night
I also have the same problem,
When i use activesync, big files like movies can only be put on the device itself, not the internal memory of 4g.
When i use the diskdrive option, the computer sees it als an usb storage, but files cannot be transferred, because of the "path is too deep" error.
in dutch it is called "pad is te lang", any options?
Also does someone know where to buy the official extended battery in Holland, because bol.com cannot deliver and other sites are way expensive.
Ok, just fixed it.
I turned off the activesync software in windows.
Connected the device to my usbconnector on the back of the pc (a 2.0 usbdrive)
Then it worked! Now 755 mb of .mp4 movie on the device...
i dont know if someone still got such a problem. I got it today and solved it with flashing an other rom on it from the Ruu.
nokmond said:
Hi all, can anyone sort this -
When i connect via usb i choose 'disk drive' to transfer files/music etc to the phone. Everty time i try to transfer anything it says on the PC (windows xp) 'cannot copy xxxx - the path is too deep'
Has anyone else had any problems or does anyone have any ideas? Thanks
Click to expand...
Click to collapse
i had that problem too and nothing helped me...i fix that with easy solution----just try another usb port on your pc...that work for me

Can not delete/ rename files through explore or on device. Unable to synchronize.

Heres a strange one.....
Just recently tried to sync my MDA Compact 4 and got the following error message:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
On investigating further, i tried the following suggestions:
- Turned off all firewalls
- Removed partnership between phone and pc (on both the phone and pc)
- Unchecked "Enable advanced network functionality" in USB to PC settings on the phone
- Reinstalled Activesync 4.5 (and also a tried a repair)
- Different USB cable and USB port (not using a USB hub)
- Several soft reboots
and finally tried a different PC just to see if i could get a guest partnership! Guess what? Same error message.
I am, however, able to explore the phone with activesync but only explore. I cant change file names, add files or delete.
On even further investigation, i've now also discovered that i cant delete/ rename files on the phone itself (using file explorer on either the device or internal storage). When i do, i get the following message:
"Cannot remove/ rename etc: Access is denied.
Be certain that the folder/file is not write-protected and is not currently in use"
(Even creating a new folder and then immediately trying to delete it gives the same error)
If i connect the phone to the PC as a disk drive though, i am able to delete files just fine. Add new files, rename them etc....without any problems.
This leads me to believe that the problem is with Windows Mobile!?!
Has anyone else experienced the same/ similar problem and figured out how to fix it? (Other than perform a HARD reset/ Clearing the storage)
Any help would be greatly appreciated.
Thanks
UPDATE:
I found this on the Microsoft help forum.
Although it hasnt fixed my problem, it might help someone else who is having the same problem.
1) soft reset device
2) Start / Office Mobile / Word
3) Create a new document (click on New)
4) type some text (just plain text - no formatting - it was 'plain text document') just a few characters
5) File / Save As...
6) I have selected type 'Plain Text'
7) It asked me whether I want to save it at 'Word document instead' - I clicked No.
8) I have powered off the device and did soft reset
9) Start file explorer, find the file (it was in My Device / My Documents), click on it - it opens Word again.
10) Add some formatting (I have selected part of text and changed font to bold)
11) Close Word - it asked whether to save it in Word format - this time I said Yes
12) Power-off the device and press soft reset again
Also, i noticed that i am able to modify any DOCX or TXT file within Mobile Word (and even delete them) just not from File explorer on the device or Explore within ActiveSync.
Can anyone help???
Same problem with different model
sh00ter said:
Heres a strange one.....
Has anyone else experienced the same/ similar problem and figured out how to fix it? (Other than perform a HARD reset/ Clearing the storage)
Click to expand...
Click to collapse
You're not alone. I have HTC Touch Pro (ie. Raphael) with exactly the same problem and I've also already tried that "Word-solution" several times without any help. However I can synchronize with my exchance server via 3G. I can also add/remove/rename files if I use some of the Office mobile applications, but not with file explorer.
Getting sooooo frustrated, but still not willing to do the hard reset.
Do both of you by any chance have Fsecure Mobile installed? Just trying to narrow the cause for the problem.
Same Problem Here
I have a T-Mobile Wing and I'm having the exact same problem. Anyone figure out whats up yet? It's so strange that I can delete/remove files and folders through active sync, but I can't through the device file explorer. I have also tried creating a folder with the file explorer, but then I cant delete, move or rename it.
Here's something that might work for you, http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
Unfortunately it hasn't work on any devices that I've seen but then again, I'm still thinking that F-secure mobile is causing the problems in our devices. F-secure has confirmed that they have heard about the problem and are investigating it.
This is very interesting as in the past 24 hours my Xperia X1 has started to do the same, I can create files ok but am unable to remove/copy files.
I am using f-secure mobile security, so it would seem there is an issue there. I'll fire an email to them to get myself on a fix list when it comes out if that's the problem!!
Any news on this issue?
I am using a trial version of F-secure mobile (on my SE Xperia, a sort of HTC ). Now, out of the blue I am experiencing similar problems:
- not able to connect to pc via Active Sync
- not able to delete/rename/copy files on both internal as external memory
- programlist appears empty
Did anyone try to remove F-secure to solve the problem?
Thanks.
I just got a reply from F-secure. They have identified the problem and are expecting to release a new version of the client within next two weeks.
Hopefully that's the end of this...
Meiz- said:
I just got a reply from F-secure. They have identified the problem and are expecting to release a new version of the client within next two weeks.
Hopefully that's the end of this...
Click to expand...
Click to collapse
Updated client was published on last friday.
I am experiencing a very similar problem on my HTC HD2 with wm6.5. If I connect the phone as USB mass storage i can copy files as much as I want to on the SD card, however when I disconnect the cable after copying WM6.5 cant read the folder sometimes.
Othertimes when I connect the phone as Activesync and start to copy some files, it stops half way through, sayign "access is denied". if that happens I cant transfer any files anymore, it will always give same error until some time passes, few disconnections, restarts, no consistency, no definite workaround. The strange is when it gets into this "access is denied" mode I can still browse the device (storage card) and create and delete folders. very-very frustrating.... did a few soft and hard resets, reinstalled activesync couple of times, still no joy...and i dont have any FW app on my device...
thanks.

HELP!!!Actisync not connecting at all - "support code 0x86000107" ???

I need to flash a new rom, and my tilt wont sync for some reason to my pc. it has before. but now, it just wont, wont even give me a notice saying it cant sync.... this was the support code on my phone when it says view status
"actisync encountered a problem on the desktop
support code: 0x86000107"
any help?
edit: I'm running windows xp not vista
turboxer said:
I need to flash a new rom, and my tilt wont sync for some reason to my pc. it has before. but now, it just wont, wont even give me a notice saying it cant sync.... this was the support code on my phone when it says view status
"actisync encountered a problem on the desktop
support code: 0x86000107"
any help?
edit: I'm running windows xp not vista
Click to expand...
Click to collapse
Why don't you do a search or google first?
Delete the PC files
I use XP64, and have experienced this a few times when I've moved pictures out of the backup file on the computer. The fastest way to resolve this is to delete the entire file structure backing up your phone from your PC. If your phone is named "TOM," then there's a whole file structure backing up the phone. If you are okay with deleting the mirror files from your computer, you should. Then when you go to Sync, activesync won't see it, and it'll create a new one. Its a sledgehammer solution, but it works.
Duplicate issue of http://forum.xda-developers.com/showthread.php?t=377823&highlight=86000107 (Seaching for 86000107 found me the thread )
Please discuss there.
Thanks
Dave

[Q] How doe you "sideload" apps to the Galaxy S?

Hi all...
Sorry for the noob question but I am still really new with Android devices.
Can someone please explain how you "sideload" apps to my Galaxy S i9000M?
I really hope this is not an extremely dumb question but I really want to try the
z4root app out that RyanZA has created and it is not YET on the Market for download.
Any assistance and explaination is much appreciated!!!
PS... Im a quick learner so once it is explained I will not bother you PRO's again for something like this...
-EDIT- Ok... I see that this thread is not getting much response so I will add some further information in hopes that someone can explain things to me.
I am on stock JH2 Eclair Firmware (if that matters).
I want to know... How is the best way to download these apk files to my device to be installed? Via my computer and then xfered to my SGS via USB or should I download the file directly to my device?
Once its on my device, where is the best place to put it? ie. Internal SD, External SD, somewhere else?
Please oh mighty DROID experts... Help this unworthy noob in his quest for "DROID-DOM"...
There probably isn't a best way, but if you download the .apk to your desktop computer you can email it to your phone and then save attachment. I use internalsd/download because I don't have an external sd. Then use a program like Astro Browser on your phone and navigate to the download directory. Tap the file you saved and then open app manager to install.
USB or through kies will get the file to your phone easily also.
I like when people create a QR code for their files. I browse mostly on my desktop so I use barcodescanner on my phone to get the link to my phone.
Videonut said:
There probably isn't a best way, but if you download the .apk to your desktop computer you can email it to your phone and then save attachment. I use internalsd/download because I don't have an external sd. Then use a program like Astro Browser on your phone and navigate to the download directory. Tap the file you saved and then open app manager to install.
USB or through kies will get the file to your phone easily also.
I like when people create a QR code for their files. I browse mostly on my desktop so I use barcodescanner on my phone to get the link to my phone.
Click to expand...
Click to collapse
Thank You Videonut. I appreciate the response and the help.
Any way works. Card reader for your SD card, KIEs, USB debugging mode, Dropbox, email attachment, web browser, bluetooth... none of it matters. Location on your phone doesn't matter either. You are still going to have to install it.
Thanks everyone for the explainations. They will come in handy in the future but for now it seems that RyanZA has put the z4root on the market and I no longer need to side load it but again... Thanks for helping!!!

Categories

Resources