Related
Has anyone managed to find a set of headphones with an inline mic (like iphone ones) that actually work with android?
They both have the same 4 band pin config. so assuming it can be possible. From the research I've been doing on here, and like forums, it doesn't seem like this gets properly answered which I think might be down to the kernel (newbie so posso totally worng here) not been able to register the additional vol. buttons? Has anyone managed to sort this problem out so you can use which ever sets you like with functionality?
I think this is a two part question with one part going towards the Q&A section but anyway.
Cheers,
search on ebay for galaxy s earphone i9000
I haven't found a pair of headphones that I can control volume with, but all the "iPhone-compatible" headphones I've used with my phone have had the mic and play/pause/answer/endcall button working.
Just for reference, I've tested this with AKG Q350 earbuds (volume doesn't work, everything else does), iPhone headphones (same deal), and JBuds J3M (this is my own pair, it doesn't have volume controls but does have a play/pause button, which works). The mics on all three work with the Nexus S.
Finally, it may be of note that the earbuds included with the Nexus S do not have volume controls on them, which may indicate that it isn't possible.
yea may be it isnt possible
Try these: http://ultimateears.com/en-us/products/200vi
I've the 170vi and no problems at all.
Hi guys,
Can you reccomend some other earphones ??
I'm interested in one that can skip songs and control the volume.
Go with meelectronics best earbuds ever. Awesome sound than my 300$ shure earbuds and very cheap also
Sent from my X10i using Tapatalk
I have tried the HTC stock headset, the headset has the volume up/down and answer button, the answer/end and mic works, but the volume will be replaced by previous track and next track, the + will be previous and - will be next track switch around, but can be rectified easily, the design of the + and - buttons can be switch around by using your finger nail and praying off with little force.
jeffwyeh said:
...I've tested this with AKG Q350 earbuds (volume doesn't work, everything else does), ...
Click to expand...
Click to collapse
I'm looking for a headset with control-keys on the wire. The AKG Q350 are more expensive but offer quite impressive sound.
So you wrote that the volume-keys doesnt work. Can I do something else with the volume-keys? Maybe changing prev/next track?
Thanks for your answer.
I haven't been able to get the volume buttons to do anything. I can control forward and back with double/triple press of the normal button. Maybe there are settings that I'm doing wrong or something, but initial poking around doesn't seem to reveal anything to me.
The best solution I've been able to come up with is Zagg Smartbuds (http://www.zagg.com/audio/smart-buds.php). Instead of volume buttons, there is a physical slider mechanism to control volume.
Not ideal, but definitely way better than nothing.
Also worth noting is that while the button controls (single-, double-, and triple-clicks) worked flawlessly on my Nexus One, they were super screwy on the Nexus S. The same set of headphones only registered single clicks-- a double click counted as two single clicks (pause--> resume play) and a triple as three single clicks (pause --> resume play --> pause again).
I'm currently using an app called Headset Button Controller (https://market.android.com/details?id=com.kober.headsetbutton&feature=search_result but there's also a free trial version) and it's working alright.
Sorry for the long-winded reply, but I had the same question for a long time and this is the best solution I've been able to come up with on my Nexus S.
Just bought the (Logitech) Ultimate Ears 600 vi, the volume up/down button doesn't work, but the play buttons work as expected, single press to pause, double press to next.
Skull candy's work fine
inb4 skullcandy hate
ykphuah said:
Just bought the (Logitech) Ultimate Ears 600 vi, the volume up/down button doesn't work, but the play buttons work as expected, single press to pause, double press to next.
Click to expand...
Click to collapse
the vi - means its for iphones and apple products..... there are vm models.... anyone have any experience with these?
ganadabunda said:
the vi - means its for iphones and apple products..... there are vm models.... anyone have any experience with these?
Click to expand...
Click to collapse
Cool, never knew the VM series existed, if it supports Galaxy S, I think it should support our NS just fine.
http://www.logitech.com/en-my/earphones/articles/vm-compatibility
Found some....
The stock headphones that come with the galaxy s3 have 3 buttons and work on the nexus s out of the box.
Play pause, next track, previous track.
Now I just need to convince my wife to let me have hers...
Hope this helps.
A-jays One+
http://www.jays.se/a-jays-one-plus?___SID=U
aint cheap though.
sosquidtaste said:
The best solution I've been able to come up with is Zagg Smartbuds (http://www.zagg.com/audio/smart-buds.php). Instead of volume buttons, there is a physical slider mechanism to control volume.
Not ideal, but definitely way better than nothing.
Also worth noting is that while the button controls (single-, double-, and triple-clicks) worked flawlessly on my Nexus One, they were super screwy on the Nexus S. The same set of headphones only registered single clicks-- a double click counted as two single clicks (pause--> resume play) and a triple as three single clicks (pause --> resume play --> pause again).
I'm currently using an app called Headset Button Controller (https://market.android.com/details?id=com.kober.headsetbutton&feature=search_result but there's also a free trial version) and it's working alright.
Sorry for the long-winded reply, but I had the same question for a long time and this is the best solution I've been able to come up with on my Nexus S.
Click to expand...
Click to collapse
How can you make it work?
Got the app but it doesn't feel volume buttons...
Nexus s and galaxy s earphones are diffrent I have both of them and galaxy s earphones cannot play music properly
i think there is no solution for the nexus s where volume control is possible. i looked for the same thing some time ago. finally i ended up using a bt dongle, sony-ericsson mw600. i use klipsch image s4 headphones where i shortened the cable at the connector and made them longer near the earbuds. now i can wear the headphones around the neck. in the back the cables are held together by the movable clip which was on the headphones originally. the dongle then hangs on my chest and i can but it under the t-shirt if i like. the controns offered by the dongle are back, play/pause, forward, bt-volume, accept calls and it has a microphone. i have to say that the volume control does not affect the nexus s, it is just the volume of the dongle and additionally, the volume control is annoying. it is not made of two buttons but rather a touch surface on the side of the unit which works less than brilliant most of the time. that said, i can leave my phone in my pocket and control all the functions i need for listening to music during the day. battery life of the dongle is about the same as my nexus when listening to music, around 8 hours.
hello.
I have very annoying problem since day one on my Galaxy S I9000 with FroYo. The volume on headset(original) is too low, barely audible, unless I press and hold the button that is on the headset. I have tried to hook up stereo speakers with 3.5mm jack and they have very low volume as well. I have tried headphones from motorola and blackberry - same thing - low volume unless holding the headset button.
I have Hannspree Hannspad SN10T1 as well and it has the same problem, it runs android 2.2. No matter what volume boosting apps I use the problem persists on both devices.
P.S. Same headsets (samsung original, blackberry, and motorola) I used to test both devices - work perfectly on my motorola defy phone. So I presume that the headsets are OK. It must be something wrong with Galaxy S and Hannspad.
Both devices are hard resetted and non-rooted.
Any help will be apreciated.
Thanks
yonef said:
hello.
I have very annoying problem since day one on my Galaxy S I9000 with FroYo. The volume on headset(original) is too low, barely audible, unless I press and hold the button that is on the headset. I have tried to hook up stereo speakers with 3.5mm jack and they have very low volume as well. I have tried headphones from motorola and blackberry - same thing - low volume unless holding the headset button.
I have Hannspree Hannspad SN10T1 as well and it has the same problem, it runs android 2.2. No matter what volume boosting apps I use the problem persists on both devices.
P.S. Same headsets (samsung original, blackberry, and motorola) I used to test both devices - work perfectly on my motorola defy phone. So I presume that the headsets are OK. It must be something wrong with Galaxy S and Hannspad.
Both devices are hard resetted and non-rooted.
Any help will be apreciated.
Thanks
Click to expand...
Click to collapse
And you are sure that the plug is all the way down?
marzello said:
And you are sure that the plug is all the way down?
Click to expand...
Click to collapse
Absolutely sure. Even tried to pull it a bit, but then just one of the headphones working. The plug goes all the way down as it should, still very low volume.
I can't be the only one with two completely different devices running android 2.2 that share absolutely the same problem.
Is there any software that can swap channels on the headsets? or swap channel for the microphone with one of the speakers, because it seems to be non-propperly configured channels to me.
Any other suggestions?
the pin-out configuration for these phones are different from most and the only headsets that i know that are compatible are nokia headsets. theres also adapters you can buy that will convert the wires the right way so the earphones/mic/button all work properly.
this one is confirmed to work: http://www.meelec.com/MEE_TRRS_Adapter_for_P_Version_Headphones_p/adptr-trrs-35.htm
Thank you very much for clearing that out evil-doer !
I will try one of those.
I thought - when I had this problem - that my headset was defect. So I bought a new one from eBay.
Everything is nice so far - The new one is working great.
I hadn't the chance to test if it's working on another device.
is there to solve this through the service mode?
Hey.
I've got an Apple In ear headset (the one with rubber pads, not the standard headset).. It's got this mic/button on the wire.
When I plug it in to my I9000 it plays the music, but without much bass and the sound is kinda weak. When I press and hold the mic button on the wire the sound is deep again, as it should be.
Obviously I can't hold the button down all the time, so is there any way that I can fix this, software wise?
Thanks in advance!
(I'm running cyanongemod 7 latest nightly)
up up and away!
No one got any suggestions?
The phone rocks, but it does have some flaws. Right now I can't seem to pause and play without pressing the button on the headphones like 2 or 3 times. I tested out a few headphones that I know worked on my old Focus and my iPhone and they don't work consistently either.
I also tried the Focus S headphones on my iPhone and it works perfectly. Anyone experience this?
you know i have, i've been posting (*****ing) about this since sunday I'm suspecting a major flaw in the design of the jack itself, but we'll see. The next track/previous track doesn't seem to work at all, and the pause/play seems to take some manipulation to work
this happens to me as well, kind of really annoying, and really my only gripe with the phone.
I get a popping sound through the speakers in my car (AUX plug) when I change from track to track. I am using the same cord I used to use with my Focus and I've checked my Focus S in both of my cars that have an AUX input.
Has anyone else tried this?
Plug your phone into your car using a male-to-male 3.5 cord and play your music through it. When you change from one track to the next you'll hear a popping sound. It's much louder in my Lexus vs my Impala but it's obvious in both cars.
I am also having both the controller issue and the "popping" sound through the speakers of my car.
The volume buttons seem to work, but the play/pause button only works when I hold the button for a second or two before letting it go. Because you have to hold it for a second before it registers, you can't use it to go back or forward through songs. I tried the controller from my Venue Pro in the Focus S with the same results, so the problem is probably with the phone itself and not the controller.
Whenever I have an AUX cable plugged into my car with the engine on, I can here a loud whining noise that I assume is the cable acting as an antenna and picking up noise. When I plug in the DVP, it seems to sort of ground the cable and stop picking up noise even when music isn't playing. With the Focus S, the noise continues when the phone is plugged in and only stops when music is playing. During the short time between songs, music is not playing and there seems to be a sort of noise spike that makes a "popping" sound.
I suspect both of these problems are related and have to do with the jack as jmerrey suggests.
I have been having the same issues with both the Car playback and the controls on headsets. I really hope they fix this major flaw. This phone will go back if not.
Sent from my SGH-i937 using XDA Windows Phone 7 App
FYI I am using a stereo Bluetooth headset from Motorola and do not see any of the above issues.
Volume up/down, pause/play and skip forward and back all work as expected.
Sent from my Focus S using XDA Windows Phone 7 App
jfreiman said:
FYI I am using a stereo Bluetooth headset from Motorola and do not see any of the above issues.
Volume up/down, pause/play and skip forward and back all work as expected.
Sent from my Focus S using XDA Windows Phone 7 App
Click to expand...
Click to collapse
that's because the issue stems from the actual headphone jack, it's not a software or firmware problem, but a hardware issue.
Okay I figured out how to get the controller to work pretty much 100% of the time. You can't just press the button, you have to hold it down for about half a second for it to pause and play consistently. Any more or any less than half a second and it won't work. I've been doing this for pretty much the entire day and it seems to be working now. Little annoying that it works on a delayed press but its better than not working at all.
Yes, but you still don't get the double press for next track, or triple for previous track. I've been able to get the double press to work a few times, but that's it. I've also noticed that with aftermarket sets, like a beats headset, it's incredibly inconsistent. I really hope this is fixable with a software patch, but I'm not holding my breath.
Sent from my SGH-i937 using Board Express
I have only volume up on all type of press button.
anyone hear if this is going to be addressed or if it has been acknowledged?
thanks
I have the same problem with my Focus S. The volume buttons are working fine, the problem occurs only with the play / pause button.
If you want to play / pause you have to hold the button longer than just the usual
short click. If you know the trick it works most of the time for play / pause, switching songs with a double click is almost impossible and very hard to time.
I tried it with the original headset from my Focus S and with the Nokia purity all have the same problems.
I also tried the all headsets with my Lumia 800 and a Omnia W all working fine.
It seems to be a Focus S only problem, not sure if it is hardware or software related.
I'm on 8107 using 2103.11.10.1 Firmware would a hard reset solve the problem??
firmware issue
I have experienced all of these problems above and here are a few tips/fixes and ideas. First with the headset controller on the ear buds, I noticed if you press harder it picks it up easier. If you get it down just right you can time it for going forward and backwards. Still not a real fix. Its definitely the phone because it works on my focus, iPhone, and mac. Also, I think it may be firmware related because the popping occurs between songs for the aux cable in the car only when audio isn't playing, so I would assume it had something to do with the firmware, not the hardware. It distinctly gets quieter when music plays, even if the music is silent (just knowing something is playing is enough for it to shut up). Also I noticed that when I plug in my phone for battery, it connects, disconnects and then reconnects. I noticed this with the vibration (should only be once, actually is 2-3 times). And when battery is low you notice because you plug in, it disconnects and you get a notice of critically low battery, and then it connects. I think this may be the firmware that all the ports seem to turn on and off whenever given any form of stimulus (data or power sent through them).
The phone rocks The phone rocks
Tango and the new Samsung Firmware fixed this issue!!!
Now i can listen to my music how it is meant to be!!!
:victory::victory::victory:
i got tango, but no new firmware. Which update updated the firmware?
I got Tango, but I had to hard reset my Focus S to get the Firmwareupdate.
Maybe because I InterOP unlocked my Focus S, I'm not sure why it worked after a Hard Reset.
My Software is now:
OS: 7.10.8773.98
Firmware: 2103.12.05.2
yes but didnt the LE2 software update disable your ability to interop unlock your device?
if we can get the phone accept our own signed cabs we can extract the driver updates, fixes and patches and ignore the diagnostic tool updates that disable our interop unlock method.
in short make a backup BEFORE applying any samsung OEM updates, when you need to interop unlock again, you can revert to your pre OEM update, apply the interop unlock again, then re apply the OEM update. from what i gather you are best doing this every time you have an OS update as there have been issues with restoring backups that cross OS versions...
Oh course you lose any unbacked up txts etc, but i think the benifit outweighs the hassle.
Ikkari said:
Tango and the new Samsung Firmware fixed this issue!!!
Now i can listen to my music how it is meant to be!!!
:victory::victory::victory:
Click to expand...
Click to collapse
I got the firmware update, but it didn't fix my headphone issues. It is still incredibly unresponsive, and the annoying clicking that is head better via aux cable is still present. Anyone have the same issue?
I've owned a One previously. I got this one off ebay, refurbished. It works beautifully however, I have noticed a problem with the headphone socket.
When I connect a headset with a mic and button to the phone, the button will not function as it should. It will either pause/play the track (it does this rarely), as it should. But more likely it will fast forward/or slightly rewind the track. I use Doggcatcher and tried Pocketscasts. Both do the same thing.
If I speak to someone with the headset in and press the button to the end call, nothing happens. I can hear this hiss and hear mic feedback like the call is connected. The screen will not light up and nothing works until I perform a hard reset.
I blamed the rom, but I have tried 5 roms now and all the same. I have blown into the headphone jack and tried to look to anything odd, but nothing.
I've rooted the device, gained S-OFF, updated firmware to latest and currently running liquid smooth lollipop rom.
I just want to somehow confirm best I can it is a hardware issue. This means alas I will have to restore the phone to stock before a return however.
Any help on this is appreciated, it is driving me mad.
Bump.
I just need to try and figure this out so, if I need to, send it back if it is truly faulty.
Another bump
Someone must know about this, driving me insane.
Pressing the damn button on my damn headset will rewind the podcast by about 10 seconds or so. And yet sometimes it will work as intended. totally random.
I just need to know if it is a fault with the device or not.
X82X said:
Another bump
Someone must know about this, driving me insane.
Pressing the damn button on my damn headset will rewind the podcast by about 10 seconds or so. And yet sometimes it will work as intended. totally random.
I just need to know if it is a fault with the device or not.
Click to expand...
Click to collapse
Does it do it with all headsets with a mic, if so then it is hardware! If not, then it is your headset!
I've only tried 2 headsets, since that is all I own. Both do the same thing. I just wanted to clarify.