Boots to custom recovery every time - Redmi K20 Pro / Xiaomi Mi 9T Pro Questions & Answe

Followed the guide on XDA, successfully installed Orange Fox.
Flashed Pixel Experience, always boots to recovery.
Flashed Evolution X, always boots to recovery.
Reflashed stock MIUI and it's working fine.
Any advice?

Ahightechtyler said:
Followed the guide on XDA, successfully installed Orange Fox.
Flashed Pixel Experience, always boots to recovery.
Flashed Evolution X, always boots to recovery.
Reflashed stock MIUI and it's working fine.
Any advice?
Click to expand...
Click to collapse
You need DFE zip, search for it in the forum and flash it.

Ahightechtyler said:
Followed the guide on XDA, successfully installed Orange Fox.
Flashed Pixel Experience, always boots to recovery.
Flashed Evolution X, always boots to recovery.
Reflashed stock MIUI and it's working fine.
Any advice?
Click to expand...
Click to collapse
Format data.
Whenever flashing over MIUI you will need to format data in TWRP/Orange Fox
There is no need to flash dfe if you would prefer to keep your phone encrypted.

Related

Custom ROMs are not able to boot

Hi everyone,
I'm right now facing the issue that none of the flashed custom ROMs can boot.
I'm right now on MIUI 10.0.2.0, the bootloader is unlocked and TWRP was installed, but since I returned to the original global ROMs via XiaomiMiFlash Tool I think it's not on the decide anymore.
I tried to install Havoc and Pixel Experience.
What is the correct procedure to flashed the roms ?
I followed the instructions on the Havoc OS Thread for "Coming from MIUI 10.0.2.0". After installing the device kept boot looping and basically "flashing" the MI Logo with the "Unlocked" Label at the bottom.
Thank you for your time and help.
This could be a problem with your data partition and encryption. You need to full wipe your data (you loose all your sdcard data, so backup as much as possible) with twrp.
I used "Format Data" under "Wipe" in TWRP.
And I tried to run the decryption zip.
Same thing.
Lighthex said:
Hi everyone,
I'm right now facing the issue that none of the flashed custom ROMs can boot.
I'm right now on MIUI 10.0.2.0, the bootloader is unlocked and TWRP was installed, but since I returned to the original global ROMs via XiaomiMiFlash Tool I think it's not on the decide anymore.
I tried to install Havoc and Pixel Experience.
What is the correct procedure to flashed the roms ?
I followed the instructions on the Havoc OS Thread for "Coming from MIUI 10.0.2.0". After installing the device kept boot looping and basically "flashing" the MI Logo with the "Unlocked" Label at the bottom.
Thank you for your time and help.
Click to expand...
Click to collapse
Try this:
1. Flash MIUI PIE 8.12.20 global Rom DON'T REBOOT
2. Flash Disable_Dm-Verity_ForceEncrypt Here DON'T REBOOT
3. Wipe Data,System,Cache Your Data will be lost
4. Flash HavocRom + Gapps
5. Reboot and Enjoy
the link to the post is here: https://forum.xda-developers.com/mi-8/development/prepare-t3841106
I followed that instructions and now I'm at least seeing the boot logo, but its stuck at the animation.
I left it for 1 hour and it's not booting...
What can I do ?

Oneplus 6 Bootloop after flashing Magisk over Oxygen OS Beta 11

Here is what I have done:
1. Boot into TWRP recovery
2. Flash OOS 9.0.3 Beta 11 followed by TWRP and Wipe Dalvik Cache
3. Reboot Successfully to android
4. Boot back into TWRP and flash Magisk 18.0 (I also tried 18.1, same result)
5. Bootloop
I've done this multiple times, each time I was able to get back into android before flashing Magisk.
Thank You for your help, much appreciated.
This might go without saying but after flashing Magisk are you also wiping Dalvik?
Nuzzlet said:
Here is what I have done:
1. Boot into TWRP recovery
2. Flash OOS 9.0.3 Beta 11 followed by TWRP and Wipe Dalvik Cache
3. Reboot Successfully to android
4. Boot back into TWRP and flash Magisk 18.0 (I also tried 18.1, same result)
5. Bootloop
I've done this multiple times, each time I was able to get back into android before flashing Magisk.
Thank You for your help, much appreciated.
Click to expand...
Click to collapse
I could be wrong but I do it slightly differently.
1. Boot into TWRP.
2. Flash rom, flash TWRP
3. Reboot TWRP, flash magisk.
4. Reboot system
Works for me.
TLX317 said:
This might go without saying but after flashing Magisk are you also wiping Dalvik?
Click to expand...
Click to collapse
Yes I am
mixlex said:
I could be wrong but I do it slightly differently.
1. Boot into TWRP.
2. Flash rom, flash TWRP
3. Reboot TWRP, flash magisk.
4. Reboot system
Works for me.
Click to expand...
Click to collapse
So I finally made it work by flashing with "Blue" TWRP. I still don't really understand the difference between the official TWRP. Whiel in loop looping after installing magisk, I went back to TWRP, flashed Blue TWRP and it booted. Wen't back intro Blue TWRP and flashed Magisk 18 (Not 18.1, thought that might have been why) and it worked. It confused me because I have successfully flashed magisk with the other TWRP before so I really don't know what fixed this.
Thank you for your help. I think I flashed me rom over 30 times yesterday getting this to work.
Nuzzlet said:
Yes I am
So I finally made it work by flashing with "Blue" TWRP. I still don't really understand the difference between the official TWRP. Whiel in loop looping after installing magisk, I went back to TWRP, flashed Blue TWRP and it booted. Wen't back intro Blue TWRP and flashed Magisk 18 (Not 18.1, thought that might have been why) and it worked. It confused me because I have successfully flashed magisk with the other TWRP before so I really don't know what fixed this.
Thank you for your help. I think I flashed me rom over 30 times yesterday getting this to work.
Click to expand...
Click to collapse
Hi could you please provide me the link to the blue TWRP you have used? I'm stuck in the same situation as you. Pls help
a4abbas said:
Hi could you please provide me the link to the blue TWRP you have used? I'm stuck in the same situation as you. Pls help
Click to expand...
Click to collapse
At the moment I'm just using regular TWRP actually. Havnt used blue since I switched the beta builds. I actually remember having trouble finding a download for Blu spark. What are your issues?

MI 9 Bricked

First of all, i fu**ed up.
So, I was on MIUI.EU 9.8.22 running Android Q.
I tried to install Syberia Rom.
Full Wipe, flashed image vendor, rom, gapps and then magisk.
Rebooted to system. Didn't work, so I went to recovery mode to fix it. It was everything encrypted so I couldn't find a way to go back to miui.eu or install another rom.
I tried to install a twrp that supports encryption via fastboot.
Now I can't go anywhere but fastboot. Any ideas?
Forgot to say, BL is Unlocked
Thanks in advance
SlugUnchained said:
First of all, i fu**ed up.
So, I was on MIUI.EU 9.8.22 running Android Q.
I tried to install Syberia Rom.
Full Wipe, flashed image vendor, rom, gapps and then magisk.
Rebooted to system. Didn't work, so I went to recovery mode to fix it. It was everything encrypted so I couldn't find a way to go back to miui.eu or install another rom.
I tried to install a twrp that supports encryption via fastboot.
Now I can't go anywhere but fastboot. Any ideas?
Forgot to say, BL is Unlocked
Thanks in advance
Click to expand...
Click to collapse
Use xiamoiflash to go back to stock and you'll be fine.
https://xiaomiflashtool.com/download/xiaomi-flash-tool-20181115
this is the latest one i think
SlugUnchained said:
First of all, i fu**ed up.
So, I was on MIUI.EU 9.8.22 running Android Q.
I tried to install Syberia Rom.
Full Wipe, flashed image vendor, rom, gapps and then magisk.
Rebooted to system. Didn't work, so I went to recovery mode to fix it. It was everything encrypted so I couldn't find a way to go back to miui.eu or install another rom.
I tried to install a twrp that supports encryption via fastboot.
Now I can't go anywhere but fastboot. Any ideas?
Forgot to say, BL is Unlocked
Thanks in advance
Click to expand...
Click to collapse
You use Mi flash 2018.5.28 https://drive.google.com/uc?id=1fGtVqNIPooDlxa-PAXBhJ4W85RPJ-Aaz&export=download
and Flash rom dev Global 9.6.27 https://mega.nz/#!CooF0CQS!qms2GwgiGq0ao9JThMUinTJVxwcJdlwnORl2S64mxrg
maybe this will help you: https://xiaomi.eu/community/threads...ck-to-global-rom-and-relock-bootloader.52257/
So, thanks to all for your answers. I managed to fix the issue using @bijandoroudian suggestion.
I don't know if i should delete this thread, maybe can be helpful for other users having the same issue

stuck on "MI"

I'm on twrp and I can't install any aosp rom anymore. format "yes", install fw 0.9.0. start with the flash seems to be all right, reboot system and get stuck on MI and nothing happens, try again with another rom and it is the same. I returned to the initial state with XiaomiFlash, I install twrp, I redo all the procedures and start again as before. any idea about it?
if i install a rom xiaomi.eu with twrp the phone works, if i install a rom always with different twrp inside it does not install anything. It had never happened to me, the problem appeared after I tried xiaomi.eu 12 how do you suggest me to proceed?
baggino said:
I'm on twrp and I can't install any aosp rom anymore.
Click to expand...
Click to collapse
Unfortunately you're not very clear with what you did. So I only can assume that you probably didn't flash vbmeta.
Cheers
Toscha
thanks tosca, I don't know how but I had used the wrong firmware ..., now all solved

Can't access twrp 3.4.0.1, H870

Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally without deleting any of my data, but does not enter twrp either. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition' and some other errors. I think that version is too old for my rom, so I'm afraid to use it for backup/flash. My phone is LG G6 H870, Android 9, software version V30b. The phone is not rooted, the bootloader is unlocked. Tried to erase cache partition and install twrp 3.4.01 again, didn't work. I can't install Skyhawk or Orangefox becuase I can't use twrp.
Is anybody facing this problem too?
Thanks!
Bootloader unlocked?
Mendoo said:
Bootloader unlocked?
Click to expand...
Click to collapse
Yes
Thelock1 said:
Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition', I think that version is too old for my rom. My phone is LG G6 H870, Android 9, software version V30b. My phone is not rooted.
Is anybody facing this problem too?
Thanks!
Click to expand...
Click to collapse
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
jis251 said:
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
Click to expand...
Click to collapse
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Thelock1 said:
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Click to expand...
Click to collapse
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
jis251 said:
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
Click to expand...
Click to collapse
Ok, thanks, I'll try to find a solution, or maybe I'll just wait for the next version of twrp.
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
AlejandroMota said:
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
Click to expand...
Click to collapse
Yes, I know I have to install twrp again every time I let the stock rom boot, but the only version of twrp working is 3.2.3 and I think that was released before the G6 received official Android 9 update, so that's why I'm not very confident using it. I've tried to enter recovery immediately after I've installed it, so I don't think that's the problem.
I have the same problem on the LG G6 H870. I won't get to TWRP. I tried several versions of TWRP and nothing.
Edit.
This twrp is functional:
https://androidfilehost.com/?w=files&flid=289997
After installation using fastboot, restart directly to twrp using power+vol. down.
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Update TWRP 3.1 to 3.4 problem
Thelock1 said:
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Click to expand...
Click to collapse
Hi, I don't know if this goes here, I hope you can help me, I update twrp from version 3.1 to 3.4 and now I can't access twrp, how can I fix it?
Hello again, I answer myself, and if it helps someone else, using adb fastboot with twrp 3.2 Melina solves it and twrp works perfectly again.

Categories

Resources