I'm on twrp and I can't install any aosp rom anymore. format "yes", install fw 0.9.0. start with the flash seems to be all right, reboot system and get stuck on MI and nothing happens, try again with another rom and it is the same. I returned to the initial state with XiaomiFlash, I install twrp, I redo all the procedures and start again as before. any idea about it?
if i install a rom xiaomi.eu with twrp the phone works, if i install a rom always with different twrp inside it does not install anything. It had never happened to me, the problem appeared after I tried xiaomi.eu 12 how do you suggest me to proceed?
baggino said:
I'm on twrp and I can't install any aosp rom anymore.
Click to expand...
Click to collapse
Unfortunately you're not very clear with what you did. So I only can assume that you probably didn't flash vbmeta.
Cheers
Toscha
thanks tosca, I don't know how but I had used the wrong firmware ..., now all solved
Related
Hi, I've unlocked my xiaomi mi 8 se bootloader and i try to flash twrp recovery and xiaomi.eu rom, but every time i reboot the device he goes in bootloop and when i try to turn off the device and to acess the recovery, the device goes in bootloop. So every time I have to reinstall the recovery and then the ROM again. But for every recovery and rom i tried the device goes in bootloop. I tried every twrp on the forum and also some Rom but the device doesn't want turn on. Can you help me, pls? thanks and sorry for my english
You need to format data in twrp, reboot to recovery in twrp, do a factory reset then flash eu rom.
or use this twrp https://forum.xda-developers.com/showpost.php?p=78047648&postcount=14
luigieg said:
You need to format data in twrp, reboot to recovery in twrp, do a factory reset then flash eu rom.
Click to expand...
Click to collapse
i do, but the phone doesn't want to turn off
kakiyomi said:
or use this twrp https://forum.xda-developers.com/showpost.php?p=78047648&postcount=14
Click to expand...
Click to collapse
i already use this twrp, this time it has not been canceled
CH4nt0 said:
i already use this twrp, this time it has not been canceled
Click to expand...
Click to collapse
I had also bootloop problem but got it working with this twrp https://drive.google.com/file/d/1X39kp3oBz-SYD-fNK-uEgD6VlUUG-WMq/view
1. Boot twrp
2. Wipe -> format data then reboot, transfer rom to device, enter to fastbootmode and boot twrp again
3. install rom and after that wipe dalvik and cache
4. now it should work
The rom what i installed was xiaomi eu stable
i found another twrp and now i have xiaomi.eu dev, thanks for the help
CH4nt0 said:
i found another twrp and now i have xiaomi.eu dev, thanks for the help
Click to expand...
Click to collapse
what twrp?
I installed the twrp mentioned by maketzu111. Then I wiped data. Then rebooted into the twrp
Then I flashed "xiaomi.eu_multi_MI8SE_V10.0.1.0.OEBCNFH_v10-8.1.zip" from the miui 10.1 stable sourceforge page. It is stuck on the mi splash-logo for a very long time. what's happening?
shanty23 said:
I installed the twrp mentioned by maketzu111. Then I wiped data. Then rebooted into the twrp
Then I flashed "xiaomi.eu_multi_MI8SE_V10.0.1.0.OEBCNFH_v10-8.1.zip" from the miui 10.1 stable sourceforge page. It is stuck on the mi splash-logo for a very long time. what's happening?
Click to expand...
Click to collapse
You did format the data? What i have read it's the main reason why device goes bootloop if you didn't do that. Rom isn't installed properly if the device stuck to bootloop or in this case stucks to loading screen
First of all, i fu**ed up.
So, I was on MIUI.EU 9.8.22 running Android Q.
I tried to install Syberia Rom.
Full Wipe, flashed image vendor, rom, gapps and then magisk.
Rebooted to system. Didn't work, so I went to recovery mode to fix it. It was everything encrypted so I couldn't find a way to go back to miui.eu or install another rom.
I tried to install a twrp that supports encryption via fastboot.
Now I can't go anywhere but fastboot. Any ideas?
Forgot to say, BL is Unlocked
Thanks in advance
SlugUnchained said:
First of all, i fu**ed up.
So, I was on MIUI.EU 9.8.22 running Android Q.
I tried to install Syberia Rom.
Full Wipe, flashed image vendor, rom, gapps and then magisk.
Rebooted to system. Didn't work, so I went to recovery mode to fix it. It was everything encrypted so I couldn't find a way to go back to miui.eu or install another rom.
I tried to install a twrp that supports encryption via fastboot.
Now I can't go anywhere but fastboot. Any ideas?
Forgot to say, BL is Unlocked
Thanks in advance
Click to expand...
Click to collapse
Use xiamoiflash to go back to stock and you'll be fine.
https://xiaomiflashtool.com/download/xiaomi-flash-tool-20181115
this is the latest one i think
SlugUnchained said:
First of all, i fu**ed up.
So, I was on MIUI.EU 9.8.22 running Android Q.
I tried to install Syberia Rom.
Full Wipe, flashed image vendor, rom, gapps and then magisk.
Rebooted to system. Didn't work, so I went to recovery mode to fix it. It was everything encrypted so I couldn't find a way to go back to miui.eu or install another rom.
I tried to install a twrp that supports encryption via fastboot.
Now I can't go anywhere but fastboot. Any ideas?
Forgot to say, BL is Unlocked
Thanks in advance
Click to expand...
Click to collapse
You use Mi flash 2018.5.28 https://drive.google.com/uc?id=1fGtVqNIPooDlxa-PAXBhJ4W85RPJ-Aaz&export=download
and Flash rom dev Global 9.6.27 https://mega.nz/#!CooF0CQS!qms2GwgiGq0ao9JThMUinTJVxwcJdlwnORl2S64mxrg
maybe this will help you: https://xiaomi.eu/community/threads...ck-to-global-rom-and-relock-bootloader.52257/
So, thanks to all for your answers. I managed to fix the issue using @bijandoroudian suggestion.
I don't know if i should delete this thread, maybe can be helpful for other users having the same issue
Hi there, I have been trying to root my k20 pro for 2 months and I am about to go crazy. First of all I don't want to install xiaomi.eu or other custom roms as they often have bugs. I use the indian version and I ve tried many different versions of magisk and tried both twrp and orange. I also tried disabling the treble enforcement and flashing the patched image but still whatever I do, after the installation, the phone loops back to the twrp page. Can anyone help me solve this?
shadow_170 said:
Hi there, I have been trying to root my k20 pro for 2 months and I am about to go crazy. First of all I don't want to install xiaomi.eu or other custom roms as they often have bugs. I use the indian version and I ve tried many different versions of magisk and tried both twrp and orange. I also tried disabling the treble enforcement and flashing the patched image but still whatever I do, after the installation, the phone loops back to the twrp page. Can anyone help me solve this?
Click to expand...
Click to collapse
uhhh just flash magisk if you have twrp
No, it's not impossible. I have a global version Mi 9T Pro and rooted with Magisk.
Find and install the custom recovery that works for you (I found that this recovery worked for me:
TWRP 3.3.1-22 Unofficial by mauronofrio)
then install magisk zip via recovery.
Good luck
Mooatreides said:
uhhh just flash magisk if you have twrp
Click to expand...
Click to collapse
installing is not the issue, I can install it but after I install, I can't go pass the loading screen and then phone goes back to twrp
shadow_170 said:
installing is not the issue, I can install it but after I install, I can't go pass the loading screen and then phone goes back to twrp
Click to expand...
Click to collapse
Do u already clear / wipe data after flashed the magisk cause i have the exact problem bootloop into twrp i solved it with wipe / format data
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
therightperson_630 said:
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
Click to expand...
Click to collapse
Don't know what your doing wrong, but this is my failsafe method should nothing else work.
Flash the latest Chinese 11.0.5 fastboot ROM. Make sure you don't lock the bootloader if using the Mi Flash Tool.
Boot into MIUI once to allow it to finalise the install, you don't need to do the initial phone setup once it boots into MIUI.
Boot into fastboot and install TWRP. I recommend the latest from mauronofrio which should be 3.1.1-32
Boot immediately into TWRP. I use the volume up button while powering up the phone.
Perform a factory reset in TWRP (using the swipe button), then format data (need to type 'yes' to confirm).
Reboot into TWRP using the TWRP boot menu, this ensures the newly formatted data partition is correctly mounted.
Copy over the ROM you want and GApps if needed, then flash.
Boot into your new ROM, everything should be OK. Then boot back into TWRP to install Magisk if you want root.
Yep that seems to have done the trick. At first I was getting frustrated because I thought I was downloading the right Chinese ROM, turns out I was downloading the recovery version instead of the fastboot one.
I think it wasn't working because I was on the beta channel. Switching over to the stable channel meant I had to go through a fastboot flash apparently. I've seen this before on my OP3.
Got lineage OS loaded, thanks for your help!
Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally without deleting any of my data, but does not enter twrp either. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition' and some other errors. I think that version is too old for my rom, so I'm afraid to use it for backup/flash. My phone is LG G6 H870, Android 9, software version V30b. The phone is not rooted, the bootloader is unlocked. Tried to erase cache partition and install twrp 3.4.01 again, didn't work. I can't install Skyhawk or Orangefox becuase I can't use twrp.
Is anybody facing this problem too?
Thanks!
Bootloader unlocked?
Mendoo said:
Bootloader unlocked?
Click to expand...
Click to collapse
Yes
Thelock1 said:
Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition', I think that version is too old for my rom. My phone is LG G6 H870, Android 9, software version V30b. My phone is not rooted.
Is anybody facing this problem too?
Thanks!
Click to expand...
Click to collapse
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
jis251 said:
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
Click to expand...
Click to collapse
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Thelock1 said:
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Click to expand...
Click to collapse
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
jis251 said:
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
Click to expand...
Click to collapse
Ok, thanks, I'll try to find a solution, or maybe I'll just wait for the next version of twrp.
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
AlejandroMota said:
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
Click to expand...
Click to collapse
Yes, I know I have to install twrp again every time I let the stock rom boot, but the only version of twrp working is 3.2.3 and I think that was released before the G6 received official Android 9 update, so that's why I'm not very confident using it. I've tried to enter recovery immediately after I've installed it, so I don't think that's the problem.
I have the same problem on the LG G6 H870. I won't get to TWRP. I tried several versions of TWRP and nothing.
Edit.
This twrp is functional:
https://androidfilehost.com/?w=files&flid=289997
After installation using fastboot, restart directly to twrp using power+vol. down.
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Update TWRP 3.1 to 3.4 problem
Thelock1 said:
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Click to expand...
Click to collapse
Hi, I don't know if this goes here, I hope you can help me, I update twrp from version 3.1 to 3.4 and now I can't access twrp, how can I fix it?
Hello again, I answer myself, and if it helps someone else, using adb fastboot with twrp 3.2 Melina solves it and twrp works perfectly again.