Hi, I broke the display. I put a new one and here the problem is - the backlight is on, but there is no picture. I assume that need to put some kind of driver on the display. But I don’t know how to do it. I was a pixel experience 10 . Miflash stitched the official global miui. But this did not work. This is either display or driver. Because my old broken screen shows signs of life there are just a lot of artifact and purple stripes. Please any help?
ps sorry for my english
The new screen is dead, buy another one.
Related
So my Screen broke and I bought a new one so I could replace it, the touch screen/digitizer didn't break though... at first the colors just started washing and fading untill the screen ended up completely dark, I could still use the touch screen and feel when I would unlock it, after a day the phone would not give me any feed back by vibrating or turning the orange light while charging, so I dismantled it using some tips from these videos:
http://www.youtube.com/watch?v=Hhj8Xs9vAyg
http://www.youtube.com/watch?v=hTRXSMQ-GJY&feature=related
After I put everything back together the phone is giving me feedback again and I can notice its charging because of the orange light, but the screen won't turn on. Does any one know if I might need to do something on the software side? like needing to re install anything? or do you think I just got a bad screen?
Update: I just took it apart again and reconnected the ribbons, its back together and the screen still won't turn on.
You have the AMOLED screen and not the LCD?
Did you compare the #'s on the old and new to see you got the right part?
Cables are the same, they look the same, part # and stickers are different...
What are the part numbers on your new and old screen? I just went through the same thing, but I'm fairly sure I got the wrong screen replacement. Will have to look more into it later tonight.
My screen wont turn on at all. I was so excited to get my N1 back in action as well.
So, I was trying to replace my Nexus 5s camera and I disassembled the main motherboard. Replaced my camera and everything but after I reassembled the phone, I found out that there's no display. The LEDs work fine, because I see them light up and I see that the screen is black but it's a bright black and the screen is on. So after tampering with it, I found that the little USB charger port wire board wire thst connects just above the battery (idk how to describe it, its the orange strip that locks the battery in place) had a direct correlation with the display. If I unplugged it, the screen would go dark and off. If I replugged it, it would be on again. After doing this a few times, I actually got my phone's display to show for a little while before it went away to black again. So will buying a new orange strip part work or would I have to go to the bottom where the little screen digitizer is? I'm sorry if the problem is unclear because I really don't know how to say it or explain any better. Please help.
Hey there guys,
Im having some problems with my Huawei P10 screen.On the left side of the screen on top there are some yellow half circles.One month ago there was only one and now there are three of them. Like on the top left of the screen.When the background is white you can see them clearly,when the background is black or any dark colour they almost disappear.
Do you think its a pixel problem or what? Like dead pixel or stuck pixel. If u know what it is can u help me to fix it?
Its not any big problem but its ugly to see them when u use phone.
Thanks
Are they present when you boot into Fastboot? Just test it, there's a white background. If yes, it's a hardware problem, maybe it's the display itself, or the flex cable or the display controller, or the display connector.
Go to a repair store, if you still have warranty send it to Huawei of, if you're able to do it by yourself, buy a display replacement (with frame).
Hey,
i just got the Xiaomi mi8 (Global Rom, MIUI 9.6) and noticed a thing with the display. If the brightness is under 40% (lower the problem gets more and more visiable, gets really bad at 10-15%) the black is starting to smear if next to a grey color. If i move a black part surrounded by grey over the screen the black smears into the grey. I also noticed there is a slight color gradient from left (dark) to the right (getting brighter).
I contected the shop i bought it from and they said they never heard of this problem. I googled the problem but got no resaults. The shop send me a new Xiaomi mi8 but guess what, the same problem occured on this new device too.
I tried to record a video but its really hard if the room is dark and the screen is at a low brightness but maybe you can see what i mean at the edges of the black parts if you look closely.
mi 8 screen recorded with a camera:
https://www.dropbox.com/s/gmgdthzthgm69dr/Black smear xiaomi mi8.avi?dl=0
https://www.youtube.com/watch?v=LkmipTa_PsY
I made a test pattern and attached it to this post. Would be really helpful if somebody could check this on his/her own mi 8 and leave feedback!
test pattern recorded with screenrecorder on mi 8:
https://www.dropbox.com/s/1fpxuybw664skgp/Screenrecorder_mi8.mp4?dl=0
https://youtu.be/qM5FsRYTgKw
Greetings
It's Normal for all oled or amoled screen.
gm007 said:
It's Normal for all oled or amoled screen.
Click to expand...
Click to collapse
Really? Hmm, than i have to look for a device with a good old LCD panel.
Absolutely normal, my old s7 did this too, its due to the fact that pixels are turned off when displaying black and it might take a fraction of a second to turn on resulting in this smear. Happens to all oled displays
Hello.
First, sorry for my english, i'm from Brazil. kkk
I need help to my xiaomi a2.
I broken the touch, but not the display, and the smartphone work perfectly.
I bought a new touch and display, but, the display not show any image.
I feel the phone shake when i press the power button. Instants later, the fingerprint works when i touched.
The touchscreen shake(shake?kkk) when i touched, like a normal work, but, the display not response.
The ilumination leds from display is on, but the display not worked.
The new display don't work or i'm brick the cellhpone?kk
Ah, The old display crashed and i can not test the cellphone.
The rom is original, no root, all original factory.
Has anyone ever experienced this?
Help-me kkk
Thanks
andertrumpet said:
Hello.
First, sorry for my english, i'm from Brazil. kkk
I need help to my xiaomi a2.
I broken the touch, but not the display, and the smartphone work perfectly.
I bought a new touch and display, but, the display not show any image.
I feel the phone shake when i press the power button. Instants later, the fingerprint works when i touched.
The touchscreen shake(shake?kkk) when i touched, like a normal work, but, the display not response.
The ilumination leds from display is on, but the display not worked.
The new display don't work or i'm brick the cellhpone?kk
Ah, The old display crashed and i can not test the cellphone.
The rom is original, no root, all original factory.
Has anyone ever experienced this?
Help-me kkk
Thanks
Click to expand...
Click to collapse
Could you provide images of the phone? Also did you check with the service centre?