Related
Bootloader = Oxygen
Bootloader = locked
USB Debug = off
Display = Black without panel light
Because of the screen can't enter the menu to unlock bootloader or install TWRP
Problem:
The phone worked before i flashed a firmware with Test Point method to remove a forgotten password. So, i flashed this firmware from http://en.miui.com/thread-844022-1-1.html and followed all the steps by removing the emmc_appsboot.mbn from the firmware with one from the MI Max 2. The problem is that after turn on the phone, i don't see anything, even the display panel has no light, is blank black, but if i wait few minutes after flashing, the phone boot in the setup menu and i hear the sounds. I can hear the sounds when charging and when phone boots up. Keep in mind that before flashing the rom when i tried to enter in fastboot or stock recovery, i didn't saw the fastboot logo or recovery menu. So, is there something wrong? Is there a file in the firmware that needs to be replaced with another one? A display firmware/driver missing? Can somebody upload a firmware for Oxygen bootloader and will all the instructions? Or is there any solution to unlock bootloader to install Twrp with a custom firmware? Any help is appreciated.
Dou you do this?
5. Run "writeselparts" application in "unbrick" folder and wait... This'll flash emmc_appsboot.mbn from Mi Max 2. When succeed, you'll get this message:...
I follow the same http://en.miui.com/thread-844022-1-1.html and everything is ok.
Hi, thanks for reply. Yes i did that. The phone boots up, i have sound but screen is black.
Any solutions?? i'm in the same situation..
NegreiAdrian said:
Bootloader = Oxygen
Bootloader = locked
USB Debug = off
Display = Black without panel light
Because of the screen can't enter the menu to unlock bootloader or install TWRP
Problem:
The phone worked before i flashed a firmware with Test Point method to remove a forgotten password. So, i flashed this firmware from thread-844022-1-1.html and followed all the steps by removing the emmc_appsboot.mbn from the firmware with one from the MI Max 2. The problem is that after turn on the phone, i don't see anything, even the display panel has no light, is blank black, but if i wait few minutes after flashing, the phone boot in the setup menu and i hear the sounds. I can hear the sounds when charging and when phone boots up. Keep in mind that before flashing the rom when i tried to enter in fastboot or stock recovery, i didn't saw the fastboot logo or recovery menu. So, is there something wrong? Is there a file in the firmware that needs to be replaced with another one? A display firmware/driver missing? Can somebody upload a firmware for Oxygen bootloader and will all the instructions? Or is there any solution to unlock bootloader to install Twrp with a custom firmware? Any help is appreciated.
Click to expand...
Click to collapse
Hey, which ROM were you using before the issue? Did your phone came with the oxygen bootloader, or you flashed it accidentally?
Hi guys! Who have official firmware for Mi 5X Oxygen? Maybe after flash official developer version screen will back?
DeeJay_145 said:
Hi guys! Who have official firmware for Mi 5X Oxygen? Maybe after flash official developer version screen will back?
Click to expand...
Click to collapse
That’s exactly what I was thinking (sort of). But instead of using their oxygen modified rom, I was hoping to find someone with a oxygen bootloader to do a entire partition backup (not just the ones that twrp allows) so I can inspect each one and check what else they changed to make it work. I still think that they change other partitions than the bootloader (emmc_appsboor)
matheusbittencourt said:
That’s exactly what I was thinking (sort of). But instead of using their oxygen modified rom, I was hoping to find someone with a oxygen bootloader to do a entire partition backup (not just the ones that twrp allows) so I can inspect each one and check what else they changed to make it work. I still think that they change other partitions than the bootloader (emmc_appsboor)
Click to expand...
Click to collapse
have you backup modified rom from oxygen device?
DeeJay_145 said:
have you backup modified rom from oxygen device?
Click to expand...
Click to collapse
No, I'm still trying to find someone that have the 5x with oxygen bootloader to dump the images.
i have one device same with your problem dont have any idea to fix
same problem for my mi phone too... how is not solved yet?!
untill now dont have any solution for it
yes i have black screen issues too... there is sounds when charging, and three buttons below showing lights, plug in to my computer and detected as Mi5X MTP in My Computer
any solution?
maybe someone has figured it out?
matheusbittencourt said:
Hey, which ROM were you using before the issue? Did your phone came with the oxygen bootloader, or you flashed it accidentally?
Click to expand...
Click to collapse
In my case, I was using a ROM MIUI.EU, when I updated via OTA, the phone was left with the black screen.
how did you fix the black screen?
i updated miui.eu via ota, i have black screen everywhere, including twrp and fastboot!! Never saw something like this!
5x with oxygen bootloader
matheusbittencourt said:
No, I'm still trying to find someone that have the 5x with oxygen bootloader to dump the images.
Click to expand...
Click to collapse
I have one.
nemo50 said:
I have one.
Click to expand...
Click to collapse
May i have your firmware sir?
same problem Did you find any solution?
Solution is: backup all your data with adb and scrcpy (hope you left adb enabled), then flash the latest China stable with MI flash. At that point flash latest xiaomi.eu stable
Hi guys!
Just installed Android P (MIUI 10 9.1.24) on my phone. I used MiFlash method, so the previous twrp got replaced with stock recovery. So I downloaded the latest twrp for mi 8 se, version TWRP-3.2.3-1227. Now whenever I try to boot into this, TWRP gets stuck at the splash screen & nothing else happens. Am I doing something wrong? Any help?
Well, just solved this issue. It is caused by that infamous encryption issue. Basically you have to decrypt your phone before flashing TWRP.
I followed this tutorial: https://forum.xda-developers.com/nexus-6p/general/fix-twrp-hangs-splash-screen-android-t3438262
evanB70 said:
Well, just solved this issue. It is caused by that infamous encryption issue. Basically you have to decrypt your phone before flashing TWRP.
I followed this tutorial: https://forum.xda-developers.com/nexus-6p/general/fix-twrp-hangs-splash-screen-android-t3438262
Click to expand...
Click to collapse
Hello there... I am having the same issue... can you explain a little bit more, how do i know the boot image i need to flash.
regards.
j0an said:
Hello there... I am having the same issue... can you explain a little bit more, how do i know the boot image i need to flash.
regards.
Click to expand...
Click to collapse
I flashed may be 5 times ( for different tests) 9.2.15 dev version from here and TWRP 1227 was working and sticking at every trial without need to deencrypt.
https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-mi-8-se/
In my view this issue is more related to the rom version 9.1.24 I didn't tested.
Anyway thanks OP for reporting.
evanB70 said:
Well, just solved this issue. It is caused by that infamous encryption issue. Basically you have to decrypt your phone before flashing TWRP.
I followed this tutorial: https://forum.xda-developers.com/nexus-6p/general/fix-twrp-hangs-splash-screen-android-t3438262
Click to expand...
Click to collapse
I would like to apologize for statement given in my last post.
I want to make things corrected and thank you for the light you gave me.
Sure it is related to bad deencryption because with 9.2.15 official rom was possible to install TWRP but we were several unable to boot any other rom after installation. We were rejected to fastboot screen at every trials. We found solution by flashing older official rom version.
Good night friend
I have Mi 8 SE that has been installed TWRP LR. TEAM 3.3.0 and runs well, in normal use suddenly stuck, and I immediately restarted my Mi 8 SE, and only entered fastboot and stuck mode, I tried to enter TWRP mode and even then just stuck on the TWRP logo, and when I flash again the method cannot because my Mi 8 SE has no USB Debuging, and only the CMD notification appears "FAILED (remote: Check device console.)",
help me to be able to fix my Mi 8 SE ,,
Thank you so much for your help
reky2426 said:
Good night friend
I have Mi 8 SE that has been installed TWRP LR. TEAM 3.3.0 and runs well, in normal use suddenly stuck, and I immediately restarted my Mi 8 SE, and only entered fastboot and stuck mode, I tried to enter TWRP mode and even then just stuck on the TWRP logo, and when I flash again the method cannot because my Mi 8 SE has no USB Debuging, and only the CMD notification appears "FAILED (remote: Check device console.)",
help me to be able to fix my Mi 8 SE ,,
Thank you so much for your help
Click to expand...
Click to collapse
Not clear enough your explanation!
"flash again" What is it?
Do you access fastboot and access on your computer?
if yes, you must flash a fastboot rom via miflash in order to reset the phone.
Hi guys!
May I know if anybody here experienced black screen ? Screen has no image to display. Backlight is working, Led light is working when charging, fingerprint vibrates as well when A2 is turned on. I have tried replacing LCD display but black screen persists. What do you think is the problem?
Sent from my Mi 9 SE using Tapatalk
I have the same problem!!!! I try flash rom again but it persists
Yesterday it happened to me also.
The phone is working, the touch is working, but the lcd is black.
I even managed to recieve a call. Tried to restart the phone but its still black screen with working touch.
I can't find any solution...
Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.
RiFeee said:
Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.
Click to expand...
Click to collapse
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen
KevMetal said:
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen
Click to expand...
Click to collapse
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.
RiFeee said:
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.
Click to expand...
Click to collapse
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta
KevMetal said:
because you are trying to downgrade
Click to expand...
Click to collapse
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked
RiFeee said:
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked
Click to expand...
Click to collapse
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before
KevMetal said:
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta
Click to expand...
Click to collapse
KevMetal said:
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before
Click to expand...
Click to collapse
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems
RiFeee said:
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems
Click to expand...
Click to collapse
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...
KevMetal said:
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...
Click to expand...
Click to collapse
I already did, tried all the tutorials from 2018 to last month. The phone bootloader is locked and for some reason I can't unlock it, tried a dozen of different approaches, recovery's, flashings, ADB and everything.
Always ends in two ways, black screen with back light on (some sounds work and keeps in the lock login screen) or dead stuck in permanent EDL mode.
My phone still not working. Maybe its because of the busted display IC.
Hi Guys,
yesterday I was able to unlock my Xiaomi Mi 9T Pro bootloader after waiting for 7 days. The unlock was successfull at first attempt, but now my issues begin and I couldnt find a thread where someone has similar isseues.
1. after unlocking the bootloader, I booted to fastboot mode and flashed twrp (from a greek xiaomi forum website ) after that I tried to boot into recovery. The attempt was unsuccessfull and I got the Mi-Logo Screen with the unlocked message at the bottom, after 60 sec the screen goes black and nothing happens, only fastboot mode is working.
2. flashed back to stock recovery -> the phone boots up successfully and is working.
3. Used the Miflash 2017.4.25.0 Tool to flash fastboot rom to have an untouched condition (clean all option).
4. tried to flash another twrp (from wzsx150), same behavior like in 1. explained. Flashing back stock recovery -> phone boots and is working.
5. again used Miflash to have an untouched condition, tried another twrp (By mauronofrio)
5. same behaviour like in 1. explained...
I actually got a Mi 8 Pro and it was so easy for me to flash twrp (also unoffical builds like now for the 9t pro). Switching to different intel laptops with win7 or win10 didnt solve the problem. Changing USB Type C cabels also didnt help
Can someone explain why I'm not getting things to work, as there are already other members which did it successfully...
Try this...
1. flash TWRP
2. Reboot directly from fastboot into TWRP with volume + and power button
3. Flash TWRP.img with TWRP
Problem solved
Kollachi, thanks for the suggestion but didnt work either.
I found a solution by myself I ordered the xiaomi from amazon DE and it was shipped with global stable, why not EEA? I always used the global stable fastboot rom to start from zero, like mentioned, without success.
The solution was flash eea fastboot rom -> twrp installation worked at first attempt and still works! Interesting that this helped me to solve this..
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
thank you for reaching out to me, however, i tried the combo you suggested, but its stuck on the Black screen. but it does connect to the computer. i also tried the miflash tools, and im getting the red Bar.
Kenora_I said:
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
Click to expand...
Click to collapse
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
i also spent Hours trying to flash it back with the miflash tool and continue to get HELLO POCKET Error plus a few other things it keep saying. Basically getting red bar error. and the coms plus drivers are downloaded correctly. i also tried all my ports. SMH.
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happened to have his info?
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happend to have his info? and thanks for your reply and Help brother
LowaEastSide said:
would you happend to have his info? and thanks for your reply and Help brother
Click to expand...
Click to collapse
so you was stuck in a black screen as well?
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
yeah let me grab his details (he's on telegram) and yeah i was stuck on a black screen too. he was able to remote onto my computer and fix the hello packet error or write error i was getting and was able to get the edl mode flash and my phone booted up afterwards
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Yeah, I wouldn't endorse it but you can only get someone like that to fix it. Also, try paying half at the start and rest in the end cause ya don't wanna get scammed
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=V8xiNoWz-Yw Tried this ? This is for global but grab a chinese version and follow the install guide
skyler13 said:
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Click to expand...
Click to collapse
Listen, I would like to thank you for helping me out Brother. I was able to reach out to the person you recommend, however he took a few hours to respond back to be. By the time he did I already had some I found on YouTube do for me remotely as well. Only chargers me $40 US. Im pretty sure I would have been able to haggle him down but figured it was a fare price. He also was kind enough to flash the globle 12.5 ROM as well. On that note, would you know if I'll be able to receive OTA updates? Or will I have to install TWRP RECOVERY and flash the new updates when they come out.? Thanks again for your help brother.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
Problem Fixes, thanks to
Ganga -->>> [email protected]> Thanks my Brother, very honest and Knowledgeable with the Xioami Mi 11. I was VERY happy that I did have to remove the back Glass and find the 2 copper prongs like other people were forced to do. Bless.
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
There's no such thing as "bricked" in 2021... even if you have to flash it via EDL, still not bricked.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
I had same situation on Redmi K20 Pro. You'll need to flash it using Mi Flash with a dev account via EDL.
And after flashing global rom, never neeever NEVER lock it back when not having chinese rom on a chinese phone.
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Pikaone41 said:
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Click to expand...
Click to collapse
Thanks you for the EDL firmware. I will download it and just in case I'll ever need it in the future. Plus I'll keep you in mind if ever I need help in the future. Honestly, I never had such a hard time reflashing a device stuck in bootloop. I've flashed so many devices in my life time but never came across such a difficult device to repair. More thank likely I'll be sticking to OnePlus. Much easier.