Related
I have a Tilt with the stock AT&T ROM and HardSPL. I keep the HSDPA data on all the time and connect to my wireless access point while at home.
I understand and am fine with wifi disconnecting in sleep mode - email still checks using HSDPA. What normally happens is when I power the Tilt back from sleep the WiFi connects back to my access point.
I've noticed more than a few times however that coming out of sleep WiFi doesn't even attempt to reconnect to the access point. It is on in Comm Manager and appears to be associated with my AP, but checking the IP online shows an AT&T IP addr, not my CATV provider.
The only way to get back on WiFi is to shut off the phone (or reset). I don't want to keep WiFi on while in standby, I just want it to reconnect when it should.
Has anyone seen this behaviour?
Cheers,
Todd
Wifi access point problem
I had a problem where suddenly after months of use with my home wifi router, it suddenly would not connect with the router anymore. Would show that it was trying to connect, and then would suddenly not connect and try another router on the list.
I tried reseting and everything. Tried re-entering the password for my router as I thought that was the problem. finally the only fix i found to work was to actually delete the access point from the phone... then reset and then let it find it all over again from scratch. And miraculously that time it worked.
I know this is not exactly your problem, but hope it helps.
I will try that and see what happens. It seems whatever sub-routine that turns the wifi on isn't running at times and doesn't even attempt to search.
Ok I have a very iritating problem.
My captivate works amazing in all ways... except one. When I'm at home connected to Wifi, within a few mins of me putting the phone down, or even mid use, the wifi will just stop working. The icon still shows it to be connected however no apps are able to actually get internet. A quick pulldown of the quick access menu and tapping wifi off and back on again gets it going great... for another 5 mins. Then the same thing happens.
Its been like this ever since I got the phone, even after flashing different roms. Now i'm running a Linksys Wireless - N router - maybe they're not playing nice?
I dont think its a hardware fault because when I serve wifi, IE the captivate is an infrastructure mode access point for 3g, it stays on consistently and my laptop can tether for 2 hours or more.
Anyone know what might be causing this?
Thanks
When you have wifi on, go to menu settings and 'Wireless and network'. In Wi-Fi settings you can change the Wi-Fi timeout.
nickbarbs said:
Ok I have a very iritating problem.
My captivate works amazing in all ways... except one. When I'm at home connected to Wifi, within a few mins of me putting the phone down, or even mid use, the wifi will just stop working. The icon still shows it to be connected however no apps are able to actually get internet. A quick pulldown of the quick access menu and tapping wifi off and back on again gets it going great... for another 5 mins. Then the same thing happens.
Its been like this ever since I got the phone, even after flashing different roms. Now i'm running a Linksys Wireless - N router - maybe they're not playing nice?
I dont think its a hardware fault because when I serve wifi, IE the captivate is an infrastructure mode access point for 3g, it stays on consistently and my laptop can tether for 2 hours or more.
Anyone know what might be causing this?
Thanks
Click to expand...
Click to collapse
Try goin to settings->wireless and networks-> wifi settings (menu key)advanced and set the sleeping policy to never
I've done that...
i *Think* i've fixed it. I was using WPA2 IPK encryption or whatever.. Switched back to the 64 bit crappy WEP. Wifi was on all night and all morning with no cut out.
Might be just another linksys-is-crap situation.
HI, I figured I keep my wifi woes within a singe thread so.
I have an old D Link WBS 2310 router.
I recently got a message from AT&T that I'm near my data limit. This surprised me as my last cycle I barely got near 500mb. Since my bill isn't ready yet, I can't see exactly what it is I'm doing to use so much data.
TO be safe I figured I'd pull out my old router and set it up. After hours of hassle getting it to work on my new computer, I wasn't able to get my Captivate to hook up to it.
My laptop works fine. It gets a fast wifi signal, but my phone just says "Obtaining IP address" for a while and then gives up.
My phone gets wifi at work, at friends', at coffee shops - but not at home.
I've tried this with no encryption, WEP encryption and WPA2 encryption.
Each time my laptop would hook up to the wifi but my phone wouldn't.
I searched some other forums and found similar problems with HTC phones.
Some answers say that D Link sucks. But that answer applies to other brands as well.
Do I need "n" wifi, rather than "g"?
I don't want to buy another router only to find it still doesn't work.
Any help?
gluvox said:
HI, I figured I keep my wifi woes within a singe thread so.
I have an old D Link WBS 2310 router.
I recently got a message from AT&T that I'm near my data limit. This surprised me as my last cycle I barely got near 500mb. Since my bill isn't ready yet, I can't see exactly what it is I'm doing to use so much data.
TO be safe I figured I'd pull out my old router and set it up. After hours of hassle getting it to work on my new computer, I wasn't able to get my Captivate to hook up to it.
My laptop works fine. It gets a fast wifi signal, but my phone just says "Obtaining IP address" for a while and then gives up.
My phone gets wifi at work, at friends', at coffee shops - but not at home.
I've tried this with no encryption, WEP encryption and WPA2 encryption.
Each time my laptop would hook up to the wifi but my phone wouldn't.
I searched some other forums and found similar problems with HTC phones.
Some answers say that D Link sucks. But that answer applies to other brands as well.
Do I need "n" wifi, rather than "g"?
I don't want to buy another router only to find it still doesn't work.
Any help?
Click to expand...
Click to collapse
part of the IEEE 802.11n standard is backward compatibility with all previous 802.11 standards IIRC, so there should be no need to buy a new n device.
HOWEVER, i am also having issues with my wi-fi and my g capable router. i will meddle around with some phone and router settings to see if i can fix this, this is one area were i can actually be of some use on this forum
Hi. It turned out the wifi was broken on my captivate. I reset it to stock and it's all better. It had been working up to the previous day so I assumed that it was still working. The router goes down intermittently in general, so I've ordered a new one to see what's up.
Hi, I'm back! So after resetting the phone and getting wifi to actually connect (rather than being stuck searching for IP address), I'm now having the exact same problem is the OP. The OP seems to have solved this by switching to WEP. I tried this and it doesn't work. My timeout is set to never. Also, it's the same at home (I replaced my router) as well as at Starbucks and a friends house.
I'm connected, but can't download or sync. It works initially and then stops, and then comes back in briefly and then stops, all the while "connected." Sometimes I can fix it temporarily by turning off wifi and then turning it back on.
SO what's the deal? Is it a hardware problem? Is there some secret magic code?
edit: Just disabled encryption - same problem.
I've notice a slight issue with my Tab. Sometimes, when it's been left sleeping for a while it 'forgets' to go back to wifi and stays on 3G connectivity, even though I'm sitting right next to the wlan router. If I check the wifi settings, the network is listed as 'out of range'. If I turn off wifi and then back on again, it connects without any trouble.
Has anyone else noticed this behaviour?
This is most certainly a router issue. The simplest fix is to reserve ip up for the tab and use fixed up settings.
I do this with all my LAN devices anyway because it adds a little security, as well as better interconnectivity.
But really you should investigate the router.
Somehow I doubt that. I'm using DD-WRT running on the classic LinkSys WRT54G, a combo that is widely famed for it reliability. I also have the router set up to serve a fixed IP to the Galaxy Tab, determined by the MAC address of the Tabs wireless interface.
I'm also running quite a few other wifi devices with the router, including three other android devices (G1, milestone, nook), and none of them show the same behavior.
I see... how many of your other devices use a dual band revision n radio? In my experience this can be a headache, even for custom firmware.
None, as far as I know. I'm not entirely sure about my wifes Motorola Milestone, but I'm pretty sure the G1 and the nook use bog standard 802.11g. I think you're right that this might be the problem. Any ideas how to improve that? It's not really a problem, just a slight blemish on the otherwise awesome experience.
This is well known android behavior making wi-fi sleep to preserver battery.
There are some mods to keep it on when sleeping.
Khisha said:
This is well known android behavior making wi-fi sleep to preserver battery.
There are some mods to keep it on when sleeping.
Click to expand...
Click to collapse
Yes, and there's nothing wrong with that. I certainly don't want wifi on all the time, I just want it to reconnect when it wakes up.
Ill look into your router tomorrow, but atm I'd say there wont be much you can do other than force g only on the router. This will stop the tab from sending crc/ plcp overhead on both bands. Crazy as it sounds, the tabs radio is actually interfering with itself in this scenario.
I just replaced my HTC HD2 with the Samsung Galaxy Tab and have the exact same problem. The HD easily picked up my work and home WiFi when I moved between them, but the Tab 'forgets' to reconnect after standby.
I'm having this problem too. Every morning I need to turn off the wifi, then immediately turn it back on, before it will reconnect. This is with an Asus WL520GC running DD-WRT.
Yes, seems to be a router/device compatibility issue.
My tab works fine in my uni network (and it has quite a few dark spots), all of my friend's networks but it intermittingly fails to reconnect to my home wlan. I have a sky router (sagem actually).
Sent from my HTC Vision using Tapatalk
I have seen this on various routers before and encountered it again last night.
There is a discussion on the cause here:
http://forum.xda-developers.com/showthread.php?t=839367&highlight=connect+wifi&page=3
It is due to the lease expiring from the access point and the device requesting the old IP with first sending a discovery message.
One work around - not the best - is to reboot the router. Then the Tab seems able to connect. Also I think if you connect ofter to the router you might not see this as the device will ask for a new lease.
Another - from the above referenced post - is to create a DHCP reservation for the Tab. This will ensure it gets the same IP address every time. I made this change to my router - so we will see.
Hope this helps.
Samsung Galaxy tab won't connect to WEP wireless
I am trying to get my Galaxy tab to connect to my HTC HD2 that is set up as a wi-fi hotspot.
My galaxy tab will connect to all WPA/WP2 networks but not the WEP. Please help.
mine does the same on a SMC Gateway (SMC8014WN) aswell as a D-Link Router (DIR-665)
I am going nuts here because of the same problem. Tab worked flawlessly for the last 4 months, found any router and had no wifi problems until recently. I have a D-Link DGL-4500 gaming router, and my dsl modem router also has a wifi connection. I suspect from the new firmware. Mine is a Euro model. I dont know why I upgraded from JK5 to JMG stock firmware, and wifi issues started. D-link's logs reports that it receives a deauth from the device and the connection ends... and never revives. Sometimes it happens 3-4 times in an hour, sometimes it stays connected for hours. I tried everything, static IP, delete dhcp list, etc. I have reset the device twice to factory defaults. Even then it disconnected the first minute I turned it on and set the wifi. So it should be a firmware issue. I realize that the wifi signal is also weaker now compared to the previous firmware. Congrats SAMSUNG! The Tab is consuming my data plan even when I am home. And I wonder how wifi only Tab is going to handle this problem. DOES ANYONE KNOW IF WE CAN DOWNGRADE FROM JMG?? Help is appreciated.
my tab does the same thing (so does my x10). But when I open my browser, or anything that needs wifi, it reconnects automatically, however the browser usually needs to be refreshed (retry).
elorimer said:
I'm having this problem too. Every morning I need to turn off the wifi, then immediately turn it back on, before it will reconnect. This is with an Asus WL520GC running DD-WRT.
Click to expand...
Click to collapse
exactly the same behaviour. Every morning, I'm connected to my router but nothing works. Turn-OFF->ON and it works again
I should have noticed Roto's entering line. See: http://forum.xda-developers.com/showthread.php?t=939360.
Since JMG has wifi isuues, I jumped onto JMI !
I just received my gen 2 moto x last night and am having trouble connecting to Wifi at work. It connects to my home network and one of my work networks just fine, but when I try to connect to the work network I need it to connect to the signal strength drops to "poor" as soon as I press connect. My home network and work network both are password protected. I've verified the password and have the same connection settings as my friend's gen 1 moto x, which connects properly. The work network has excellent signal at all times when I am not trying to connect to it. It just keeps cycling from "connecting" to "saved."
Has anyone else experienced this or know a workaround? I found this but this is for a gen 1 (I'm not sure if that would help) but I'm not rooted so I don't have access to phase 2 authentication. http://forum.xda-developers.com/moto-x/moto-x-qa/wifi-signal-drops-trying-to-connect-t2872241
Thanks,
Mike
mikekory87 said:
I just received my gen 2 moto x last night and am having trouble connecting to Wifi at work. It connects to my home network and one of my work networks just fine, but when I try to connect to the work network I need it to connect to the signal strength drops to "poor" as soon as I press connect. My home network and work network both are password protected. I've verified the password and have the same connection settings as my friend's gen 1 moto x, which connects properly. The work network has excellent signal at all times when I am not trying to connect to it. It just keeps cycling from "connecting" to "saved."
Has anyone else experienced this or know a workaround? I found this but this is for a gen 1 (I'm not sure if that would help) but I'm not rooted so I don't have access to phase 2 authentication. http://forum.xda-developers.com/moto-x/moto-x-qa/wifi-signal-drops-trying-to-connect-t2872241
Thanks,
Mike
Click to expand...
Click to collapse
Exact same problem. Fine at home and everywhere else. Spent a couple hours this week on the phone with Moto. They keep saying it's the network, yet everyone else is on it. They say update firmware and open MAC. Both of which are done.
This is the message in the Access point every 3 seconds when my phone is trying to connect...
"Client Deauthenticated: MACAddress:9c:d9:17:a1:c8:51 Base Radio MAC:b8:62:1f:ad:5e:90 Slot: 0 User Name: unknown Ip Address: unknown Reason:Unspecified ReasonCode: 1"
My wife's phone drops WiFi in favor of 4G LTE at home. I have to turn off data to connect to WiFi but it eventually drops the WiFi. I'm still waiting on my pure edition so I'm not sure if its just her phone or if its a common problem.
bradley26 said:
My wife's phone drops WiFi in favor of 4G LTE at home. I have to turn off data to connect to WiFi but it eventually drops the WiFi. I'm still waiting on my pure edition so I'm not sure if its just her phone or if its a common problem.
Click to expand...
Click to collapse
This!
I have this problem all the time ON multiple networks, its very frustrating
Mines will disconnect from my 5ghz when the screen goes off and reconnects when turned on, works fine on 2.4ghz. I have a Nighthawk ac1900 so the phone is definitely the problem.
Sent from my Hammerhead
This is related to 802.1X, We have it implemented Radius and 802.1X at work and it doesnt connect. But the same AP has a guest SSID which has no protection and a separate vlan which has access only to internet and it works fine.
giovannirc said:
This is related to 802.1X, We have it implemented Radius and 802.1X at work and it doesnt connect. But the same AP has a guest SSID which has no protection and a separate vlan which has access only to internet and it works fine.
Click to expand...
Click to collapse
Sounds like this could be my problem. We have 4 networks we can login to, but they are all broadcast from the same access point. One says "secured with 802.1x" and is for laptops, two say "secured with WPA/WPA2" and are for cell phones/other, and the final is unsecured. I can only connect to the unsecured network.
So does it sound like it's the phone that's refusing the network, the network is refusing the phone for something the phone is sending back to it, or the network is refusing the phone for another reason?
I'm having this same issue. 1st Gen Moto X sitting right next to 2nd Gen, and the 1st Gen is connected while the 2nd Gen can't.
I'm having the exact same issue. It appears the problem is that older Cisco firmware doesnt support 802.11w, which is what the moto x 2014 uses by default. Here is a thread where a moto rep explains it to Cisco - https://supportforums.cisco.com/discussion/12331486/connectivity-issues-cisco-controllers-and-pmf-enabled-moto-x-gen-2
My girlfriend and I have this phone and we had a similar problem. It would connect/reconnect like a billion times before staying connected on our home network but connect fine on other networks. I tried several solutions but the one that worked was changing the channel on the router. I live in an apartment building and there are a lot of WiFi networks around me so I figured that might be causing some interference. I changed my channel from 6 to auto (it automatically jumped to 11) and now it connects instantly and is solid. What's weird is I tried channels recommended by WiFi analyzer and my other devices would connect just fine but the Moto X's couldn't even see the network in the list when it was on a lot of channels like 12, 13, and 14.
Seems like a weird WiFi radio firmware bug to me.
Is there a client side fix for this?
I just ran into the problem at my work. It is a major hospital. They are not going upgrade their cisco firmware so a couple of people's personal phones are able to connect to the network.
WiFi in general is bad on the X2014 and I am reading the same in the Droid Turbo forums.
Sent from my XT1095 using XDA Free mobile app
What!? Really?
I've not had a single issue with WiFi connectivity. I'm an IT professional so heavily reliant on WiFi.
will54880 said:
WiFi in general is bad on the X2014 and I am reading the same in the Droid Turbo forums.
Sent from my XT1095 using XDA Free mobile app
Click to expand...
Click to collapse
Wutang200 said:
I've not had a single issue with WiFi connectivity. I'm an IT professional so heavily reliant on WiFi.
Click to expand...
Click to collapse
I never had a WiFi problem with the Moto X 2014 until today at work. It wouldn't connect to a few different clients Wireless APs. At the first client site I power cycled the phone and WiFi still wouldn't connect. I then went to another client site and once again it would no longer connect. I power cycled again and this time it connected just fine albeit Bluetooth was acting funny and not connecting to the Moto 360. After cycling Bluetooth off and on again the 360 finally connected. Not sure if this is an actual issue or just dumb luck. I wonder if anyone that was having WiFi issues with this phone also has a Moto 360 connected via Bluetooth?
I don't own a 360 and my bluetooth is normally switched off unless I'm streaming music at home.
I know none of what I am about to write will solve anyone's issue but sharing my experiences mught help understand you're not alone. I wander between as many as a dozen different wifi networks daily. I manager a 63 room hotel on 7.5 acres where we are currently running EnGenius EAP350 AP's broadcasting in 2.4mhz band ONLY using .11bgn. I set the entire network to use one SSID so roaming is, in theory, problem free. My XT1095 has not had any issues at all here on property.
I also have my personal network in the lobby and main building under 2.4/5/.11AC side by side with out guest network. No issues bouncing around. I honestly expected issues but have found none.
There is one issue I have found in Android in general which can happen randomly, or I have not been able to induce the behavior only recognize it. Occasionally when I move from one building to another Android (ICS forward for sure) will forget which actual AP it's after and just hang. My solution is to tell the device to forget that node then once forgotten the network, of course, shows up in the list. I then select it and boom we're back in business.
I do have issues when I visit a network at say, the grocery store which requires accepting an EULA...the device simply will hang Wifi wize, even when I delete and reconnect I won't get the note to open the authorization page. I end up just killing wifi and going with LTE.
I get the same behaviors from all my phones ICS though Kitkat, don't have Lollipop yet darn it!!
I have long been frustrated with this weirdism from Android but have reached a point of M.A.D. with my devices but never found a solution.
I have noted I have the most issues by far with Cisco/Linksys devices. It has been almost assured that if I have an issue it's one of those routers running an older firmware version (amazing how many AP/routers use default password settings...I mean, really???)
Not 100% sure it's a firmware only issue but I do think it's some common bit of hardware in an AP/Router which can go spastic for some reason preventing Android from figuring out how to remain or get connected. I even had one of the EnGenius AP's go nuts, a fast swap with a freshly configured AP resolves but, again, still does not identify or solve the problem
I also sense there is some oddness deep in the bowels of Android's wifi/networking subsystem which just was never written correctly and may never be fixed.
Last I run and app called Wifi Analyzer by Kevin Yuan, it helps me a GREAT deal because I can target a specific AP/node to connect with. Android versions often defeat this by not remaining connected to that desired target AP and switching to something else. Here is where I think some of the issues with wifi connectivity live...Google MUST spend some time refining their wifi subsystem.
No matter this is a Very frustrating issue when it happens. My best solution has always been to forget the current connection then reconnect with it again once it reappears. Better yet use Wifi Analyzer or similar app to target a specific AP/node and connect/forget from inside the app, that really does seem to help, mostly...sigh, I know, sorry...
This WiFi issue is really aggravating. I have tried so many things:
1. Rebooting Router
2. Powering Off/On Phone
3. Turning WiFi Radio Off/On
4. Resetting Phone Cache Partition
5. Using WiFi analyzer and setting my router to various channels manually
6. Changing Router SSID
7. Forgetting SSID on phone and re-adding it
8. Verifying MAC Filtering is not enabled
9. Enabling MAC filtering and specifically allowing phone MAC address
10. Disabling "Avoid Poor Connections" in WiFi settings
11. Manually setting WiFi frequency band to 2.4ghz in phone settings
12. Disabling "WiFi Optimization" in phone settings
23. Changing WiFi direct and BT phone names (yeah, a big stretch, but I read somewhere that this worked)
24. Installed updated firmware on my ASUS RT-N12D1 (3.0.0.d.376_3602)
25. Disabled WPS on router
26. Switched router between Auto, Legacy and N-Only
27. Disabled Authentication and Encryption on router, just an "Open" connection.
After all of this, the phone still has WiFi connectivity issues. Sometimes after a phone power cycle it will connect to WiFi, but never for very long. Every other device I have connects to the WiFi without issues. I just got the Moto X a few days ago (AT&T version) and this is the first time I have ever had a device with WiFi connectivity issues like this. Very aggravating. There is clearly something wrong with either the hardware, or software on the phone.
There are some other oddities. When it won't connect to WiFi, there is something strange with the phone. Its not like it just can't connect or stay connected to WiFi, but somehow it seems like the WiFi is in a stalled state. Sometimes it won't show any WiFi networks and just says "Searching for WiFi networks..." until I turn off wifi and turn back on again. Then as soon as it turns back on, it will show the nearby SSID's, and try to auto-connect to my router, but after a few seconds it shows "Disabled" under the SSID. Then after a few seconds the disabled goes away, and it just shows the SSID name. It also won't let me change the WiFi Direct phone name while the WiFi is in this state, it gives me an error saying "Failed to rename device", followed by "Group Creation Failed". However, when I am actually connected to WiFi, I can rename the WiFi direct name just fine. So its not just simply an issue with bad radio signal or something, but something more serious, like the WiFi state is hung or something. If I can't resolve this in another day or two, I am going to have to return the phone, and hopefully a replacement will work. If not, I might have to get something other than a MotoX because I can't not have WiFi while at home and work.
---------- Post added at 12:29 PM ---------- Previous post was at 12:10 PM ----------
I found a way that seems to work to connect to WiFi. To clear, this isn't a fix for the data-sync issue that some people are having, or poor signal, but the issue where you can't connect to an SSID, and there is no error or anything.
1. Hold Down Power Button
2. Turn Airplane Mode On
3. Turn Wi-Fi On
4. Connect to SSID
5. Press Power Button down again
6. Turn airplane mode "Off"
I have now tried this several times, and it works everytime. If I turn off Wi-Fi and back on again, it won't connect, until I do the airplane mode trick. I don't know who to give credit for this, I have spent days and hours searching, and I remembered reading that from somebody else, but not sure where, so this is not my fix, I am just posting it here as it seems to work.
This issue is strange, and must be some combination of Android, and Motorola software/hardware/firmware configuration. I hope they get this fixed, but it at least now, this temporary fix will work whenever WiFi is not connecting.
For those of you getting WiFi connectivity problems, it could be related to your router setup. Download an app called InSSIDer and run a scan, then choose a channel that's not being used but make sure it's 5 channels higher or lower. For example, if it detects 3 networks on channels 3, 5 & 6, then you want to choose channel 10 or 11. If it detects one network on channel 6, then you should choose channel 1 or channel 10 or 11.
I noticed issues like this when I bought my Nexus 4 after my iPhone 4. Android devices seem to ship with rubbish WiFi radios.
Like I've mentioned before, I've not experienced a single disconnection with my phone either at home, work, in laws, coffee shops or anywhere else ever. Same with my first gen Moto X.
Mine is slightly different. Now and then, after power cycling or rebooting, it forgets all the WiFi passwords. Not every time. Just now and then.
Also sometimes it's quite fast, some slow. My wife's firs gen is pretty constant.
Has anybody had any problems with their WiFi not connecting? My device seems to fail to connect to wifi after a couple of days and just sits trying to connect. Toggling WiFi doesn't seem to resolve it, and I have to reboot the entire phone to get it back online.
No problem here.
Connects very quickly, never seen it fail to connect, even on my works dodgy BT homehub 3, which used to tie my old Z3 compact up in knots..
Yep.I thought that Snapdragon 835 cause this problem. Xi oami 6., ZTE z17 and Op5 had the same question with WI-FI connection.
gesongwei said:
Yep.I thought that Snapdragon 835 cause this problem. Xi oami 6., ZTE z17 and Op5 had the same question with WI-FI connection.
Click to expand...
Click to collapse
I have a sd835 s8 and I haven't had any wifi issues whatsoever since launch. It's a sample size of 1, but I don't know if it's truly due to the sd835
I haven't had any WiFi issues. In fact my WiFi connections have improved using the XZ1 compact over the X performance (the X performance dropped its WiFi connections 3 times during my data transfer to the new phone)
I've had my XZ1c for about a week now (European model) and it connects to my home network (5G) normally. Signal strength is fine, although the galaxyS6 it replaced definitely had superior reception. I do have wifi issues, but only when already connected to the network. When the phone is asleep (screenlocked) it seems to lose an active connection. The wifi connection should be on at all times, even asleep. It will show the wifi symbol, but data apps don't load, and it will have lost the connection as remote for spotify connect (playing on my reciever). It will also switch to mobile data at random times with normal wifi signal strength (even though I toggled this function off in the developper settings).
I'm not sure if this is something that can be fixed through system updates. I haven't seen any forum posts with similar problems though, so I'll try to document what is actually happening before I contact Sony support.
I bought the US version and flashed the UK firmware to get the fingerprint reader to work. No issues whatsoever with this phone. No Wi-Fi issues, overheating, signal strength, battery, nothing. Everything works just perfectly.
Same issue here. Mine is Europe (NL) version. The upload and download speed can be very unstable. And especially when I take it a bit far way, even you see that it's connect to the wifi with full signal strength, it said internet is unavailable.
I'm not sure if this related to the system update of last weekend or not.
Further to my issue. My phone will drop wifi connection and repeatedly try and connect - it usually cannot see any other networks at the time. Restarting the wifi on the phone, or rebooting the access point do not help. Running a packet sniffer on the LAN shows no activity, which indicates the issue is to do with wireless handshaking.
The problem occurs every few days and the only way to resolve it is to reboot the phone, which fixes it instantly.
I contacted Sony and they told me to do a complete reset on the phone, this didn't work. I updated my findings and pointed out that it's seems to be a firmware compatibility issue. Of course, you only get to talk to first line, and as a reset didn't work, they want me to send it off for a warranty repair (which of course will be returned with "no fault found" as no doubt their wifi will be different enough for it not to have been picked up on day 1 testing).
I'm currently trying to gather a bit more information on the fault, e.g. does it only happen on my home wifi etc. I've disabled channel bonding but that didn't help, and I've not jiggled my DHCP settings after seeing plenty of posts describing wifi problems on Oreo for other phones.
It doesn't happen frequently enough and I don't have the time to delve deeply into the network to identify the cause.
One interesting thing was that it went funny at home, but it was working when I got to work. When I got home it still couldn't connect. So I suspect it's to do with a particular compatibility issue somewhere.
no problem here conecting to 5 and 2.4 wifis...
android_fury said:
I bought the US version and flashed the UK firmware to get the fingerprint reader to work. No issues whatsoever with this phone. No Wi-Fi issues, overheating, signal strength, battery, nothing. Everything works just perfectly.
Click to expand...
Click to collapse
I haven't gotten around to this yet. Do you still have wifi calling and volte available?
---------- Post added at 11:05 AM ---------- Previous post was at 11:04 AM ----------
So far my wifi has been fine...
Mine is worst, i couldnt get it to connect at all but all my other device including xperia xa, xzp, laptop, Ps4 PS3, everything connect without any issue whatsoever, already excahnged once and still the same.
Think mine is struggling with either a single access point or VLANs. I need to dig further, but that requires buying a new AP - this phone is getting more and more expensive!
exactly same issue as Dashers describes with my XZ1c. I am not watching it closely, but it seems that it is hapenning after around 2 days online. Never happened before on same network with my previous Z3c, which had run months without restart and any problems whatsoever (till its display died
Dashers said:
Further to my issue. My phone will drop wifi connection and repeatedly try and connect - it usually cannot see any other networks at the time. Restarting the wifi on the phone, or rebooting the access point do not help. Running a packet sniffer on the LAN shows no activity, which indicates the issue is to do with wireless handshaking.
The problem occurs every few days and the only way to resol... .
Click to expand...
Click to collapse
I have more or less the same issues, and a reboot always solves it. It happens with both routers form ASUS and Draytek.
Additionally I see issues with Spotify connect dropping or not being found on my Sonos (hardwired to LAN), but not so much to Chrome Cast Audio on the same network.
I don't have a problem connecting to wifi, but I seem to have a different issue. Even though wifi scanning is toggled off in settings, my phone still seems to be scanning according to Battery Historian. I think this is one of several things contributing to my high idle drain. Does anyone else have this problem?
jrbmed08 said:
I don't have a problem connecting to wifi, but I seem to have a different issue. Even though wifi scanning is toggled off in settings, my phone still seems to be scanning according to Battery Historian. I think this is one of several things contributing to my high idle drain. Does anyone else have this problem?
Click to expand...
Click to collapse
Have you turned wifi scanning off ?
settings\Lock screen & security\Location\Scanning - turn wifi scanning off
Didgesteve said:
Have you turned wifi scanning off ?
settings\Lock screen & security\Location\Scanning - turn wifi scanning off
Click to expand...
Click to collapse
Yes, wifi and BT scanning are both turned off in settings and have been since the beginning, but both seem to be happening anyway according to Google's Battery Historian tool. When I go back in to see if they've been toggled on by an app or something, they still appear to be off.
Dashers said:
Further to my issue. My phone will drop wifi connection and repeatedly try and connect - it usually cannot see any other networks at the time. Restarting the wifi on the phone, or rebooting the access point do not help. Running a packet sniffer on the LAN shows no activity, which indicates the issue is to do with wireless handshaking.
The problem occurs every few days and the only way to resolve it is to reboot the phone, which fixes it instantly.
I contacted Sony and they told me to do a complete reset on the phone, this didn't work. I updated my findings and pointed out that it's seems to be a firmware compatibility issue. Of course, you only get to talk to first line, and as a reset didn't work, they want me to send it off for a warranty repair (which of course will be returned with "no fault found" as no doubt their wifi will be different enough for it not to have been picked up on day 1 testing).
I'm currently trying to gather a bit more information on the fault, e.g. does it only happen on my home wifi etc. I've disabled channel bonding but that didn't help, and I've not jiggled my DHCP settings after seeing plenty of posts describing wifi problems on Oreo for other phones.
It doesn't happen frequently enough and I don't have the time to delve deeply into the network to identify the cause.
One interesting thing was that it went funny at home, but it was working when I got to work. When I got home it still couldn't connect. So I suspect it's to do with a particular compatibility issue somewhere.
Click to expand...
Click to collapse
I have this exact problem. One second its 100% signal and is workin as expected. The other second it just drops and tries to reconnect like crazy. I have even had moments when i am unable to find my wifi after said disconnect. All my other devices is working like normal on my wifi. Using Asus n66u 5ghz.
I have been having the same issues as mentioned above with my XZ1 compact(european). My issues with dropping wifi signal seems to be happening when there are two different wifi signals to choose from. They are both on my local network. One is an extender due to the size of my house. When it can detect both signals, it can't make a decision on which one to choose. Once I remove a device(forget wifi device), it stays connected to the other with no problem. Since it isn't trying to compete with the other.
Has there been any improvement on this issue?