Hi, first time posting here, forgive me if I'm doing something wrong...
I flashed Nougat beta (L19C432B322), regretted it, and now wanting to go back to EMUI 4.1.1 (before flashing, I was on L19C20B150). Trying to follow the steps for the Huawei official rollback package, but problem is I can't even get the intermediate package (C900B300) to work through dload method... update always fails at 5%.
I am unable to relock my bootloader using the SRK tool. The error I get is "remote: root type is risk".
My phone has never been rooted.
Any help would be greatly appreciated!!
Edit: Tried to flash L19C636B168 full rom using dload method. Now bootloader is locked, but no rom is installed, booting always gives erecovery. Unable to flash any recovery via fastboot.
Hey all. I was trying to rollback my P9 to a stock ROM, but it failed and now I am stuck with a bricked P9 (bootloop).
My phone is a European P9 (EVA-L09C432). I have an unlocked bootloader.
- Huawei eRecovery and HiSuite restore does not work.
- I've tried forcing the update using the SRK Tool brick utility, but receive the message "FAILED (remote: sparse flash write failure)" when it's strats writing 'system'.
- My TWRP backup does not work, I had a 7GB backup that installs fine, but the phone is still stuck in a bootloop.
- I can flash EVA-L09C432B378 ROM using the SRK brick utility fine, but the phone is still stuck in a bootloop.
- After I have installed B378 and try to force flash B136 using the dload method, it either gets stuck on the "going into restore mode" or it goes to the "installing package" screen, where it is stuck at 5% until it reboots.
Any suggestions?
try one more time install rollback package by download mode
I've tried. Several times, all day :crying: My process:
Write TWRP from fastboot so I can boot into TWRP and transer UPDATE.app to the dload folder
Reboot into fastboot
Write stock recovery image from fastboot
Boot into recovery mode
Get stuck at 5% on the "Installing update" screen.
I've tried the UPDATE.app or firmware B136 (stock), and UPDATE.app for B378 (Nougat)
Both get stuck at 5%.
I'm stuck at the bootloop
isn't srk tool only for MM?
maybe try extract recovery , boot and system partition from b378 and flash by fastboot , next start flash rollback package by download mode
I noticed when I tried to restore my backup using TWRP it failed at "vendor" (Failed to wipe vendor). I receive this issue at vendor and product.
I tried using fastboot to flash vendor and product manually, I receive these error messages:
"failed: remote command not allowed"
The phone won't allow me to write vendor and product.img... but my bootloader was unlocked?
Is it possible I could have relocked my bootloader? How am I supposed to get the bootloader code for my P9 again :/ It's nearly impossible.
I managed to use the recovery dload method to install a beta version of B378 (build number NRD90M test-keys). Will now try to use the recovery method to roll back to B136 and update back to B378 again.
Highfall said:
I managed to use the recovery dload method to install a beta version of B378 (build number NRD90M test-keys). Will now try to use the recovery method to roll back to B136 and update back to B378 again.
Click to expand...
Click to collapse
I'm having similar issues. Have you solved your problem? What have you tried so far?
Same problem here! Did you resolve?
Thanks you.
Try unplug charger or usb cable then do it
WTF, that ist the solution to the whole damn problem! Just unplugging the damn usb cable and it installs the update just fine. ive spend 2 whole days on this, almost giving it up beacuse everytime it got stuck at 5% and then this...
seriously thank you!
JimmyEatFood said:
Try unplug charger or usb cable then do it
Click to expand...
Click to collapse
thx i managed to boot my device, but i relocked bootloader and factory reset doesnt work correctly it deleted 3rd party apps and leaved few system apps and blotware. what should i do.
and really thanks, you saved me.
Removing cabled worked for me also
Hi all
After several tests to update my P10 with HWOTA it got stuck on the unlocked bootloader message (device acnnot be trusted)
and the eRestore which has only restard, shutdown and download the latest firmware options (last option dosn't work
I tried flashing bboot and recovery but still cant boot or get into the recovery mode
Tried extracting the ROM and putting it in dload folder on the SD but nothing neither
any help would be higly appriciated
Nick
Nikoloz said:
Hi all
After several tests to update my P10 with HWOTA it got stuck on the unlocked bootloader message (device acnnot be trusted)
and the eRestore which has only restard, shutdown and download the latest firmware options (last option dosn't work
I tried flashing bboot and recovery but still cant boot or get into the recovery mode
Tried extracting the ROM and putting it in dload folder on the SD but nothing neither
any help would be higly appriciated
Nick
Click to expand...
Click to collapse
Try with this method : https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I have bricked my phone after Magisk install fail.
I first unlocked bootloader succesfully
then i installed twrp succesfully
then i flashed magisk using twrp - this failed and sent device to erecovery. (which won't find package)
i used twrp to wipe data, now i was able to boot, and it installed like a fresh EMUI. However, almost all apps were broken- could not download themes/camera shut down etc.
To fix this, i wanted to restore to stock and did the following: download update package for my VTR-L09 of EMUI b175 (I was on b162 before), used Huawei Update Extractor to extract files and flashed BOOT.IMG, SYSTEM.IMG and RECOVERY.IMG. This was done without error.
Now my phone won't boot at all. I am stuck at the 'your device can't be trusted' screen. I cannot go into recovery. When I connect via USB, I hear the chime in Windows but I can't seem to connect with ADB.
What to do now?? Am I hard-bricked? I hope that anyone knows how to deal with my phone bricked like this. Please help me to solve this issue.
Best of wishes.
Edit: I am able to enter forced recovery, however updates fail at 5%.
I am also able to fastboot with USB, however I am unsure what to do next.
I unbricked my phone! Many thanks to who ah way and his solution found here: https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
:victory:
why are you doing it when you dont understand it?
You cannot flash part of B175 firmwar eover B162 firmware.. OMG.
use the HWOTa to go back to stock and please stop playing with the device without propper knowledge
I used firmware finder to udgade nougat to oreo on my P10. I used VTR-L29... which the app said was okay for my device, now i'm stuck on the Huawei eRecovery page but when i try to press download latest... it doesn't work, i'm stuck in a loop. My problem is that I have a backup, but I dont have TWRP installed...
I'm really stuck... can someone help?
Use firmware finder for pc and push the update by proxy and then Erecovery should work.
It's your phone branded?
And don't forget to push with the same version that you had before trying to flash with ff