Hi everyone.
I have a problem with RGB back light with notification:
I set the LED to blink as a notification appears, but most of the times it doesn't work.
However, with the notification still unread, if I press the power button to turn the screen on and then I press it again to turn it off, the back LED start blinking as it should.
I want it to start blinking immediatly with a new notification, the way it works now has no purpose.
I think it could be a software bug.
Any fix? Is it a common bug?
Related
How to stop the light from flashing when you've missed a notification?
For example, when the battery reached 10%, it gets a low battery notification. Normally, if you press Dismiss, the light on the navigation control button will not flash anymore. But if you don't press Dismiss, the light will keep on flashing. However, if you wait too long or if your device is locked, you may miss the notification and the light will keep on flashing. How do you turn this off manually after you've missed the notification? I still want the notification to be enabled for next time, I don't want it disabled permanently, I just want to know how to press "Dismiss" again so that the light will stop flashing for this time.
Thanks.
Someone please help, thanks.
my diamond had the same problem.
what's even worse, when the battery reached 10% and i pressed Dismiss, the light on the navigation control button keep on flashing about every 30 seconds until i had it rebooted.
jackyking said:
my diamond had the same problem.
what's even worse, when the battery reached 10% and i pressed Dismiss, the light on the navigation control button keep on flashing about every 30 seconds until i had it rebooted.
Click to expand...
Click to collapse
What version of ROM are you using? I'm using the official 2.03 and as long as I pressed Dismiss, the light will not flash. The problem is, sometimes I will miss to press Dismiss. This also doesn't only apply for low battery, it's for any type of notifications, but some notifications such as missed call and SMS, I can still stop the flashing even if I missed to press Dismiss, I just have to open the missed call tab or read the SMS.
CE version 5.2.21109
rom version 2.03.109.1 CHS
radio 1.11.25.01
i'm using some kind of cooked rom from a chinese pda forum.
now i can see that this seems to be a bug from this non-official rom.
could someone be able to tell me how to solve this problem without
flashing my diamond ?
When I make a phone call the backlight stays on and is nice and bright like i want it. But as soon as I press the end button, the backlight turns off and my screeen is REALLY dark. Pushing any button doesn't make the backlight come back on. I have to manually go into the backlight settings and toggle it to get it to turn back on. Any suggestions?
use kaisertweak/advanced config
disable fast sleep during call, and sleep during call
Hi to all,
as you know, when new sms is received on Topaz and the screen is not active, green led starts blinking. That usually happens as well on my device, but sometimes there is no sound neither blinking when message is received.
But when I activate the device, the notification of new message appears. The problem is that the message is usually hour or even more older. Anyone has the same problem? Or is it just me?
The blinking light will stop after 5 min, by default. I changed mine to flash indefinitely.
1. Go to Settings - Sounds & Notifications - Notifications
2. Select Messaging: New text message
3. For the "Flash light for ..." option, change it to "No limit"
Message received sound notification
I have the same problem when it comes to playing the message received sound notification when my phone is locked. When I receive messages I can only see the blinking light notification then after I unlock the phone the sound plays. Its really annoying. Does anyone have a solution?
same here. But not always. I think it happens when the device is not locked and the screen is in stand-by
common issue...ROM issue!!! hopefully it will be fixed with the next ROM release
Yes I'm getting this to, it seems to be intermittent... And its annoying...
I picked it up yesterday off the table turned it on and Yep the SMS sound notified me and said it had a new sms and the green led started blinking, its like it goes into some sort of sleep mode and when you pick it up to turn it on, it then lets you know you have a message..... I hope there's fix for this soon..
R..
Hi
I had this issue and fixed it.
I used Advanced Config and under the power settings changed 'Battery resuming from suspend timeout' changed this from 1 second to 10 seconds.
The problem is the device wakes up, often gets enough time to signal the LED to flash but the device suspends again too quickly for the sound to play.
Regards
Phil
PhilipL said:
Hi
I had this issue and fixed it.
I used Advanced Config and under the power settings changed 'Battery resuming from suspend timeout' changed this from 1 second to 10 seconds.
The problem is the device wakes up, often gets enough time to signal the LED to flash but the device suspends again too quickly for the sound to play.
Regards
Phil
Click to expand...
Click to collapse
The problem is that the device even does not start blinking. So it behaves like there is no new message until you press power off button and the screen becomes active. Not sure whether we are talking about the same problem
uhmm... after screen turns off I cannot wake it up using the power button or volume button whatever nothing. tried holding the power button for a loooongggg time nothing I can see green led light flashing had to pull out the battery to restart. Does not happen ALL the time but happens some times.
Turn off "In Pocket Detection"
Hi guys,
I hope you're all well.
I recently opened up my i9305 to remove a buggy power button whilst at it I was looking at the vibration motor. I reassembled it, placed it on charge. And it didn't respond instantly as usual, after a few minutes the red led light turns on but nothing else? What's weird is that when I press the home button the red led light will disappear for a few moments and then reappear. There's no way I can turn it on because I've got no power button, no splash screen comes up whilst charging.
Does anybody know what's going on? I'd appreciate any help