[ROOT WITH Magisk/TWRP] A70 ANDROID 9/10 ON ANY VERSION - Samsung Galaxy A70 Guides, News, & Discussion

Hi I bring you how to root and install twrp on A70 any version ,I think its work on all new samsung device:good:
note :
1-first unlock your bootloader https://forum.xda-developers.com/galaxy-a70/development/recovery-twrp-galaxy-a70-t3955984
2-in all step Remove auto reboot in odin
requirement files :
PeaZip
https://www.peazip.org/download-installer-p-windows.html
TWRP recovery.img mack it tar with PeaZip
https://github.com/Grarak/android_device_samsung_a70q-twrp/releases
vbmeta.tar Vbmeta.img- https://www.androidfilehost.com/?fid...26312261811717
Stock recovery.img from your stock rom [ you can download your device rom and extract stock recovery ] and mack it tar with PeaZip
Magisk 20.1- https://www.androidfilehost.com/?fid...26312261797449
Odin3- https://www.androidfilehost.com/?fid...26312261811763
Samfirm- https://www.androidfilehost.com/?fid...26312261811762
Lets start
1- in stock roms maybe work on custom roms
2-boot in to download mode and flash vbmeta.tar via odin in ap
3-after that reboot to recovery by pressing vol+ and power and clear data and cache in stock recovery
4- reboot again in to download mod and now flash twrp via odin in ap
5-reboot to twrp recovery by pressing vol+ and power and slide right to modify. Click wipe, click format data, type yes after that go back and reboot to recovery. slide right to modify, click mount, if mount system partition read-only is checked, back out and reboot back to recovery and check mount again, it should now be unchecked. . Now click Vendor so its checked and system should be unchecked, back out.
6- Copy Magisk 20.1 to the External sd card. In TWRP click install, select storage and choose micro sd card, click on magisk and slide right to confirm. (you must have vendor checked in mount or it wont flash properly). when done, click all way back click reboot to download.
7- now flash stcok recovery tar file via odin and reboot your device to system
8-after your device start run Magisk and update it by install options
well done you have twrp and rooted device :fingers-crossed::good::fingers-crossed:
i think this method work on all new samsung device and just you have own your device file like
twrp /stock recovery /vbmeta
note : if your twrp Stuck on twrp logo you have to install stock recovery and repeat from step 2
tested device A705FN:fingers-crossed:
thanks to :good:
MarvinMod
Grarak
and other to help me in this method

thanks a lot. i will test it today and check back here tomorrow
edit: i cant flash twrp via odin. download mode says "only official released binaries are allowed"
bootloader unlocked
oem unlock grayed
vmeta flashed
wipe data cache
but cant flash twrp. tried to download latest version but still no joy
i have 705FN with A705FNXXU5BTC2 rom installed

thewalekk said:
thanks a lot. i will test it today and check back here tomorrow
edit: i cant flash twrp via odin. download mode says "only official released binaries are allowed"
bootloader unlocked
oem unlock grayed
vmeta flashed
wipe data cache
but cant flash twrp. tried to download latest version but still no joy
i have 705FN with A705FNXXU5BTC2 rom installed
Click to expand...
Click to collapse
Hi i think you have to first flash 4file rom on your device
Plez check this maybe help you
https://forum.xda-developers.com/sa...torial-root-november-security-update-t3715661
Your bootloader must be updated

seli1987 said:
Hi i think you have to first flash 4file rom on your device
Plez check this maybe help you
https://forum.xda-developers.com/sa...torial-root-november-security-update-t3715661
Your bootloader must be updated
Click to expand...
Click to collapse
Hi thanks for the reply. But the day before i read this post, i flashed the latest firmware from sammobile which is the rom i told in the post (BTC2). Doesnt latest firmware include latest BL? Where can i find the current version of my BL in my phone?

thewalekk said:
Hi thanks for the reply. But the day before i read this post, i flashed the latest firmware from sammobile which is the rom i told in the post (BTC2). Doesnt latest firmware include latest BL? Where can i find the current version of my BL in my phone?
Click to expand...
Click to collapse
Try again flash 4 file frimware and let device start to system after that reboot to download mod and flash vbmeta.tar and let your device start to system
After that reboot to stock recovery and wipdata and cach and reboot to download mod and now flash twrp
The wrong is with your bootloader if you cant fix it try to search your problem in google
You are not only one have this problem

I did every thing from scratch. Even lock and unlock the bootloader.
I am tring to make sence. Vbmeta is "verified boot". So the idea is trick the phone with our own bootloader so that we can flash twrp.
Since i cant flash twrp, vbmeta should be updated.
Am i right?

thewalekk said:
I did every thing from scratch. Even lock and unlock the bootloader.
I am tring to make sence. Vbmeta is "verified boot". So the idea is trick the phone with our own bootloader so that we can flash twrp.
Since i cant flash twrp, vbmeta should be updated.
Am i right?
Click to expand...
Click to collapse
Unlock bootloader, factory reset, unsure oem is unlocked and grayed out in settings >developer options.
Then flash vbmeta, manual reboot to download mode, flash twrp, boot to twrp, factory reset in twrp , flash magisk zip then factory reset again, now boot system.
The vbmeta you flash is empty and allows flashing third party zips.

Hiii, i did almost everthing, but when i boot in recovery and go to mount, system partition read-only is checked. already tried 4 for times reboot to recovery but still checked.
Yes, i slide right to allow to modify. Any suggestion ?

BubSystemS said:
Hiii, i did almost everthing, but when i boot in recovery and go to mount, system partition read-only is checked. already tried 4 for times reboot to recovery but still checked.
Yes, i slide right to allow to modify. Any suggestion ?
Click to expand...
Click to collapse
Go ahead with the steps. Ignore mount system.
Let's see what happens
Worst scenario, you soft brick the phone or bootloop which can be fixed by flashing stock rom again.
Make sure you have stock rom and you backup your data

Any way to pass SatefyNet?

Instal this path in Magisk:
https://github.com/kdrag0n/safetynet-fix/releases/download/v1.1.0/safetynet-fix-v1.1.0.zip

Related

N920C Stucks at SAMSUNG logo whenever i flash TWRP or CF-Autoroot

Hi guys,
Im using Note 5 N920C at lastest stock Nougat firmware (N920CXXS4CRA2)
i've got a very headache when try to flash twrp (to flash custom rom) but my N920C still get stuck at Samsung logo
Prepare: unlock OEM, Odin 3.12, TWRP 3.2.1.0, SuperSU-v2.82
1. Try flash TWRP by Odin. reboot get stuck. Try to reboot to Recovery, wipe cache -> phone get reboot all the time
2. Back to Stock FW, try to flash TWRP. This time reboot to Recovery, allow system modifications -> flash N920_Nougat_Root_SuperSU_No_kernel_included script -> reboot and stuck
3. Back to Stock FW, try to flash TWRP. This time reboot to Recovery, allow system modifications -> format data -> reboot to recovery -> flash supersu -> reboot and stuck again
4. Back to Stock FW, TWRP allow system modifications > wipe data> reboot recovery > allow system modification> wipe data, system,cache, dalvik/art > flashed 'dm-verity and force encryption disabler' > flashed 'super-su' > flashed Custom ROM -> Stuck again
5. If i flash Lineage OS (or CM rom) via TWRP, it works without any issue
...
As many time i tried to flash something, myphone still get stuck, i dont know why because my previos Note 5 seem to be very easy to root (at Nougat also)
Could you please help me to findout what problem happen here and how can i flash a custom rom properly (i can back to stock whenever it stucks but i want to flash custom roms). Thank you so much
venomnguyen said:
Hi guys,
Im using Note 5 N920C at lastest stock Nougat firmware (N920CXXS4CRA2)
i've got a very headache when try to flash twrp (to flash custom rom) but my N920C still get stuck at Samsung logo
Prepare: unlock OEM, Odin 3.12, TWRP 3.2.1.0, SuperSU-v2.82
1. Try flash TWRP by Odin. reboot get stuck. Try to reboot to Recovery, wipe cache -> phone get reboot all the time
2. Back to Stock FW, try to flash TWRP. This time reboot to Recovery, allow system modifications -> flash N920_Nougat_Root_SuperSU_No_kernel_included script -> reboot and stuck
3. Back to Stock FW, try to flash TWRP. This time reboot to Recovery, allow system modifications -> format data -> reboot to recovery -> flash supersu -> reboot and stuck again
4. Back to Stock FW, TWRP allow system modifications > wipe data> reboot recovery > allow system modification> wipe data, system,cache, dalvik/art > flashed 'dm-verity and force encryption disabler' > flashed 'super-su' > flashed Custom ROM -> Stuck again
5. If i flash Lineage OS (or CM rom) via TWRP, it works without any issue
...
As many time i tried to flash something, myphone still get stuck, i dont know why because my previos Note 5 seem to be very easy to root (at Nougat also)
Could you please help me to findout what problem happen here and how can i flash a custom rom properly (i can back to stock whenever it stucks but i want to flash custom roms). Thank you so much
Click to expand...
Click to collapse
1: Flash the rom after you wipe system, data & cache.
2: Let it boot for the first initial setup & setup your phone with language & country etc.
3: Restart your phone to twrp recovery then flash supersu & dm verity.
Let me know.
PRADEEPHONDA said:
1: Flash the rom after you wipe system, data & cache.
2: Let it boot for the first initial setup & setup your phone with language & country etc.
3: Restart your phone to twrp recovery then flash supersu & dm verity.
Let me know.
Click to expand...
Click to collapse
Did you mean flash stock or custom ROM ? as i mentioned above, when flash custom my phone will stuck at logo (i can boot only with LineageOS, dont know why
I will try these steps:
1. Back to Stock
2. Flash TWRP, immediately go to TWRP recovery
3. Format Data, reboot to TWRP recovery
4. Flash SR5-SuperSU-v2.82-SR5-20171001224502.zip and no-verity-opt-encrypt-6.0.zip
5. Wipe Davik Cache
6. Reboot.
Am i right ?
I will try and post result to you for more help. Btw, thank for your attention.
venomnguyen said:
Did you mean flash stock or custom ROM ? as i mentioned above, when flash custom my phone will stuck at logo (i can boot only with LineageOS, dont know why
I will try these steps:
1. Back to Stock
2. Flash TWRP, immediately go to TWRP recovery
3. Format Data, reboot to TWRP recovery
4. Flash SR5-SuperSU-v2.82-SR5-20171001224502.zip and no-verity-opt-encrypt-6.0.zip
5. Wipe Davik Cache
6. Reboot.
Am i right ?
I will try and post result to you for more help. Btw, thank for your attention.
Click to expand...
Click to collapse
No.... After flashing stock through Odin, let the device boot for initial setup dude. Don't flash twrp...!
After the phone setup is done you can go back to download mode & flash twrp.
There is no need to format data for rooting your device dude.
Just flash supersu & no verity... You will be fine.
Stock rom or custom ROM follow my words.
PRADEEPHONDA said:
No.... After flashing stock through Odin, let the device boot for initial setup dude. Don't flash twrp...!
After the phone setup is done you can go back to download mode & flash twrp.
There is no need to format data for rooting your device dude.
Just flash supersu & no verity... You will be fine.
Stock rom or custom ROM follow my words.
Click to expand...
Click to collapse
It does not work, both my way and or way, it's still stuck
venomnguyen said:
It does not work, both my way and or way, it's still stuck
Click to expand...
Click to collapse
In your first post you have stated that you are not able to flash custom rom but now you are telling me that your phone is stuck even when Flashed with stock rom....!
I'm confused about what's happening here because the methods you have stated will not work in any case scenario as base ROM is required to flash - root to system or any mods so without rom you can't root any phone by flashing supersu first before even flashing rom that's the logical here.
There is no my method or your method but there is a universal step by step method which you clearly need to understand.
But anyways I can't help you anymore as I have no video to assess your process.
As a last resolution I will suggest one more method, if you can boot your phone to stock recovery then you can reset your device by factory reset which will again wipe everything within the phone so proceed with caution(just mentioning) so once you wipe your phone through stock recovery. Let me know. It has to boot in my opinion.
Before you do this try to reflash official & latest firmware which will be the January security updates through Odin with default settings.
After you get Odin pass message, it will automatically reboot so wait for 30 minutes max. If nothing happens press & hold volume down & power key to reboot device & as soon as the screen goes off to reboot, you will have to enter to recovery mode by holding on to volume up, power & home key as you already will know (just mentioned) then wipe to factory reset. Reboot.
Let me know if this works.
If not I'm located in Bangalore so if you are from Bangalore then I might help you. Again no fees or charges (just mentioned)
Or
Try this rom:
https://forum.xda-developers.com/note5/development/rom-t3607729
Or take it Samsung official Store to find out if your device has any issues with power chips or so..!
PRADEEPHONDA said:
In your first post you have stated that you are not able to flash custom rom but now you are telling me that your phone is stuck even when Flashed with stock rom....!
I'm confused about what's happening here because the methods you have stated will not work in any case scenario as base ROM is required to flash - root to system or any mods so without rom you can't root any phone by flashing supersu first before even flashing rom that's the logical here.
There is no my method or your method but there is a universal step by step method which you clearly need to understand.
But anyways I can't help you anymore as I have no video to assess your process.
As a last resolution I will suggest one more method, if you can boot your phone to stock recovery then you can reset your device by factory reset which will again wipe everything within the phone so proceed with caution(just mentioning) so once you wipe your phone through stock recovery. Let me know. It has to boot in my opinion.
Before you do this try to reflash official & latest firmware which will be the January security updates through Odin with default settings.
After you get Odin pass message, it will automatically reboot so wait for 30 minutes max. If nothing happens press & hold volume down & power key to reboot device & as soon as the screen goes off to reboot, you will have to enter to recovery mode by holding on to volume up, power & home key as you already will know (just mentioned) then wipe to factory reset. Reboot.
Let me know if this works.
If not I'm located in Bangalore so if you are from Bangalore then I might help you. Again no fees or charges (just mentioned)
Or
Try this rom:
https://forum.xda-developers.com/note5/development/rom-t3607729
Or take it Samsung official Store to find out if your device has any issues with power chips or so..!
Click to expand...
Click to collapse
Hi Bro,
Maybe you misunderstand what i mean. Ofcouse i can back to stock firmware without any problem. I said it still suck is when i try to flash TWRP, even root or Custom ROMs.
Thank you.
venomnguyen said:
Hi Bro,
Maybe you misunderstand what i mean. Ofcouse i can back to stock firmware without any problem. I said it still suck is when i try to flash TWRP, even root or Custom ROMs.
Thank you.
Click to expand...
Click to collapse
OK you have to state what version twrp you are flashing?
Now if it's just recovery then I would say to try TWRP 3.1.1.0 which is most stable version in my view.
Note: Re-download all Twrp tar, Supersu & no verity zip.
First flash twrp & then let the device boot to home screen.
Second reboot to recovery by hard keys.
If you see stock recovery go back to download mode flash twrp & go back to recovery without booting as you are doing but this time just swipe to allow modifications & reboot to recovery again.
Without flashing anything just reboot from recovery to system.
Thirdly if you device reboots to home screen then again get back to twrp recovery & now flash supersu & no verity zip & restart device. You should be able to solve this.
PRADEEPHONDA said:
OK you have to state what version twrp you are flashing?
Now if it's just recovery then I would say to try TWRP 3.1.1.0 which is most stable version in my view.
Note: Re-download all Twrp tar, Supersu & no verity zip.
First flash twrp & then let the device boot to home screen.
Second reboot to recovery by hard keys.
If you see stock recovery go back to download mode flash twrp & go back to recovery without booting as you are doing but this time just swipe to allow modifications & reboot to recovery again.
Without flashing anything just reboot from recovery to system.
Thirdly if you device reboots to home screen then again get back to twrp recovery & now flash supersu & no verity zip & restart device. You should be able to solve this.
Click to expand...
Click to collapse
Thank, i'm using TWRP 3.2.1.0 currently, i will try TWRP 3.1.1.0 as your guide. So, i will try as following step:
1. Flash TWRP 3.1.1.0 and let it boot to Home Screen
2. If ok then go to Recovery -> flash upersu & no verity zip & restart device
2.1 If still in stock then flash twrp again -> go to recovery -> allow modification -> reboot to recovery -> reboot to system
2.2 If cannot boot to Home Screen after First Step then flash twrp again -> go to recovery -> allow modification -> reboot to recovery -> reboot to system
Are those correct ?
venomnguyen said:
Thank, i'm using TWRP 3.2.1.0 currently, i will try TWRP 3.1.1.0 as your guide. So, i will try as following step:
1. Flash TWRP 3.1.1.0 and let it boot to Home Screen
2. If ok then go to Recovery -> flash upersu & no verity zip & restart device
2.1 If still in stock then flash twrp again -> go to recovery -> allow modification -> reboot to recovery -> reboot to system
2.2 If cannot boot to Home Screen after First Step then flash twrp again -> go to recovery -> allow modification -> reboot to recovery -> reboot to system
Are those correct ?
Click to expand...
Click to collapse
Yes
PRADEEPHONDA said:
Yes
Click to expand...
Click to collapse
Hi bro,
after try few time, the result is:
1. After flash TWRP and boot to home Scree, it's stuck at Samsung Logo, so i took the 2.2 step
2.2. Re-flash TWRP -> recovery -> allow modification -> reboot recovery -> reboot system. Then my device loop in bootloop
After all i have to back to stock and consider to give up rooting my phone . But one thing that always in my mind, why my Note 5 can boot normally with lineageos after flash with TWRP. Does this os different from other custom ROM that can boot in my Note 5.
Anw, thank you so much for your assist.
venomnguyen said:
Hi bro,
after try few time, the result is:
1. After flash TWRP and boot to home Scree, it's stuck at Samsung Logo, so i took the 2.2 step
2.2. Re-flash TWRP -> recovery -> allow modification -> reboot recovery -> reboot system. Then my device loop in bootloop
After all i have to back to stock and consider to give up rooting my phone . But one thing that always in my mind, why my Note 5 can boot normally with lineageos after flash with TWRP. Does this os different from other custom ROM that can boot in my Note 5.
Anw, thank you so much for your assist.
Click to expand...
Click to collapse
No problem, you are welcome.
Try magisk root. Follow their rooting procedures in the xda forum.
magisk root for note5 nougat try this sir.
http://galaxynote5root.com/galaxy-n...galaxy-note-5-on-android-7-0-nougat-w-magisk/
venomnguyen said:
Hi bro,
after try few time, the result is:
1. After flash TWRP and boot to home Scree, it's stuck at Samsung Logo, so i took the 2.2 step
2.2. Re-flash TWRP -> recovery -> allow modification -> reboot recovery -> reboot system. Then my device loop in bootloop
After all i have to back to stock and consider to give up rooting my phone . But one thing that always in my mind, why my Note 5 can boot normally with lineageos after flash with TWRP. Does this os different from other custom ROM that can boot in my Note 5.
Anw, thank you so much for your assist.
Click to expand...
Click to collapse
Hi there it's not that difficult i've faced the same issue with my n920c
Solution: Install the TWRP recovery just like normal but when the device is rebooting and black screen shows up Press and Hold [Power+home+vol down] until you see TWRP screen
Please Note: this is really important to press and hold while rebooting ...
After this you can normally reboot to recovery there would be no problem
Good luck !
hey bro,,im facing same problem i am a poor fellow and note5 was a gift for me, but i upgraded it to 7.0 from 5.1.1 which i was running from 2017....now the same problem always on samsung galaxy note5 logo ..i dont know what to do tried various roms , kernels it boots to homescreen but if i restart it gets stuck...otherwise lineage boots everytime, whats the problem ,,,xda heroes kindly help me and others facing this.
---------- Post added at 03:17 PM ---------- Previous post was at 03:16 PM ----------
plz rply devs
---------- Post added at 03:17 PM ---------- Previous post was at 03:17 PM ----------
venomnguyen - any solution bro? did u succeed

Galaxy A6+ unable to install ROM Stock by ODIN

Hello friends, I've been trying to fix a giant problem with my son's cell phone for three days ... He asked me to rotate it, but I brickee it, I comment on what happens and what I did:
specs:
Glaxy A6 + (SM-A605GN)
1-install TWRP by ODIN (Correct installation)
2-Install TWRP files "force_encryption_disabler, RMM State Bypass and non-verity-opt-encrypt (I think here is my mistake, since I do not know the functions of these files, in my time of Flasheo does not exist) I take it out of this tutorial: androidinfotech.com/root-samsung-galaxy-a6-plus-2018-sm-a605f-fn-gn-pie/[/url])
Error 3-First; I didn't have access to the internal memory in the TWRP, so I followed this tutorial youtube.com/watch?v=bqyVQCGlyqs[/url]) to change the partition system so I could access the internal memory correctly
4- Install the Magisk correctly through the TWRP
5- Restart (And my hell began) ...
a- TWRP informs me that I did not have OS installed on reboot
b- When restarting the screen it tells me: Set guarantee bit: Kernel (in yellow)
c- Try to install the Firmware Stock by Odin, but I can't, it doesn't throw me an error, but it doesn't install anything at all, IT KEEPS ME THE TWRP INTACT
d-Download a Modified ROM, the installation by TWRP and it was installed correctly, but the SIM card does not work (I assume it is because it has a different modem) and I get an error for almost everything L
I want to go back to the Stock ROM but ODIN does nothing ... Please I need your help.
I can access Download and TWRP mode.
discuss the translation ...
Friends, any ideas ?? ... any help is appreciated.
As you already flashed twrp, so i think you know how to go download mode. Just see any youtube video how to flash stock rom on s8/s9. Download your latest firmwere from sammobile or samfrew and flash. Procedure is same as s8 or s9.
tutul2336 said:
As you already flashed twrp, so i think you know how to go download mode. Just see any youtube video how to flash stock rom on s8/s9. Download your latest firmwere from sammobile or samfrew and flash. Procedure is same as s8 or s9.
Click to expand...
Click to collapse
Friend, that's the problem, ODIN doesn't let me install the Stock Rom, at the end of the flash process with Odin, the phone remains intact (with the TWRP intact)
DARKSIDERS_2012 said:
Friend, that's the problem, ODIN doesn't let me install the Stock Rom, at the end of the flash process with Odin, the phone remains intact (with the TWRP intact)
Click to expand...
Click to collapse
What kind of error? or it flashes perfectly? Give us something.. Photo of odin and your phone's download mode screen...
When you first time booted twrp, you needed to click on wipe > format data. This will decrypt your phone (and it wipe your internat storage) then you can flash rmm and no verity. After that, click on reboot > recovery and then reboot > system (or flash magisk). Recommended to flash latest rmm and no verity.

My k20 pro isnt booting up

I tried installing custom rom for the first time now i did it with xiaomitool but it gave error that it couldnt wipe data and my phone stuck on boot.
Then on my phone i booted to twrp and frm there i wiped dalvik cache and data with a wrappedkey error but i continued and flashed pixel exp plus and formatted data and when i rebooted system i again got stuck there
Then once again i went to twrp and tried wiping dalvik cache and data again but this time with wrappedkey amd some decrypted error to and formated data and then tried rebooting to system. Again nothing worked pls help my otherwose my parents are going to kill me
EDIT : Also my laptop has mac os so i think there isnt much i could do with pc and thats only why i used unofficial xiaomitool in the first place
If youre coming from xiaomi rom or xiaomi eu rom you need to format data ( option in twrp where you type yes) not just wipe data, then reboot to recovery (twrp) again and then follow instruction of rom you want to install. Some custom roms require flashing vendor firmware before flashing rom , then gapps , then magisk if you require root ( if magisk wont install then after flashing rom reboot to twrp again). Also xiaomitool is not ideal for installing custom rom but for recovery and fastboot roms ( one that came originally with phone when phone had locked bootloader, never tick wipe and lock)
Disregard my comment about xiaomitool, had thoght that you mean miflash tool
But how
That rom is not in my phone anymore nor i know how to install back to xiaomi rom btw my phone is indian varient
UPDATE
I once again tried flashing pixl exp plus using a diff tutorial which included flashing some disable force encryption and now my device wont even boot into twrp its stuck on fastboot mode.
Now i only hot two question :
1.) will i be able to charge my phone in fastboot mode (or any other way?)
2.) will i be able to flash stock miui rom in fastboot mode through my mac (or if theres any other way pls tell me)
Yes you will be able to charge through fastboot
Just flash twrp again thn boot into twrp and go to wipe - format data and type yes.
Until and unless you format data you will not be able to do anything
Thn download Indian vendor zip ,your required rom and disableforceencryption.zip in your pc and copy it to the phone while in twrp.
Go to wipe and wipe cache ,dalvik ,data,system,vendor
Thn flash vendor zip followed by rom and dfe
Now reboot
device is jusr stuck on fastboot
Pronoy_ said:
Yes you will be able to charge through fastboot
Just flash twrp again thn boot into twrp and go to wipe - format data and type yes.
Until and unless you format data you will not be able to do anything
Thn download Indian vendor zip ,your required rom and disableforceencryption.zip in your pc and copy it to the phone while in twrp.
Go to wipe and wipe cache ,dalvik ,data,system,vendor
Thn flash vendor zip followed by rom and dfe
Now reboot
Click to expand...
Click to collapse
i did the sameexcept for vendor as i had latest miui but phone got stuck in fastboot and twrp is not accessible.
now what if i install official fastboot rom will it relock the bootloader and brick my phone for good?
ak20prouser said:
i did the sameexcept for vendor as i had latest miui but phone got stuck in fastboot and twrp is not accessible.
now what if i install official fastboot rom will it relock the bootloader and brick my phone for good?
Click to expand...
Click to collapse
Only if you forget to change the option in the Mi Flash Tool, which is easily done if you're not paying attention. If the fastboot ROM is the correct version for the phone then you won't brick the phone if you forget to change the flash option. You will just need to unlock the bootloader again before doing anything else.
After flashing a fastboot ROM, boot into MIUI once so that the install finalises itself.
Then flash TWRP and boot into TWRP.
Do a factory reset, then format data. No need to wipe anything else.
Reboot into TWRP to ensure the newly formatted data partition is properly mounted.
Now copy across and flash the ROM of choice plus any optional extras.
There is no need to flash dfe files or vbmeta, etc.
Assuming you've flashed the latest fastboot ROM, then there's no need to flash vendor or firmware files.
Just go through this post
Trust me it has solved all of my issues
http://forum.xda-developers.com/k20-pro/how-to/simple-beginners-guide-to-raphaelin-t4020543
Pronoy_ said:
Just go through this post
Trust me it has solved all of my issues
http://forum.xda-developers.com/k20-pro/how-to/simple-beginners-guide-to-raphaelin-t4020543
Click to expand...
Click to collapse
Hello Bro. I flashed the latest firmware and the evolution x rom but now my phone is stuck on the redmi logo. I am able to go back to recovery but what do I do now?

Question How do i get Stock recovery to not replace TWRP when rebooting???

Tried a bunch of things to make the TWRP installation persistent, but it just goes back to MIUI recovery when i reboot from the system.
I'm using TWRP 3.5.2 by Nebrassy.
USB debugging turned on
Correct drivers installed
fastboot devices work Using minimal ADB and fastboot
I have the file renamed as TWRP.img.
Steps i followed:
fastboot boot "TWRP.img" - Correctly boots into TWRP
install the TWRP image to the recovery partition - Happens with no errors
Reboot to system - No errors there as well
Reboot to recovery - Goes back to MIUI recovery.
Can someone please tell me what i should do?
PS: Tried with TWRP 3.6.0 as well just now. Same issue.
Helhound0 said:
Tried a bunch of things to make the TWRP installation persistent, but it just goes back to MIUI recovery when i reboot from the system.
I'm using TWRP 3.5.2 by Nebrassy.
USB debugging turned on
Correct drivers installed
fastboot devices work Using minimal ADB and fastboot
I have the file renamed as TWRP.img.
Steps i followed:
fastboot boot "TWRP.img" - Correctly boots into TWRP
install the TWRP image to the recovery partition - Happens with no errors
Reboot to system - No errors there as well
Reboot to recovery - Goes back to MIUI recovery.
Can someone please tell me what i should do?
PS: Tried with TWRP 3.6.0 as well just now. Same issue.
Click to expand...
Click to collapse
Try again to flash TWRP dirty and if it's started don't boot with software. You have to boot TWRP again by pressing volume + and power button until you'll get vibration , afterwards you'll be in TWRP again, clear dalvik and cache and restart system via TWRP menu
Laptapper said:
Try again to flash TWRP dirty and if it's started don't boot with software. You have to boot TWRP again by pressing volume + and power button until you'll get vibration , afterwards you'll be in TWRP again, clear dalvik and cache and restart system via TWRP menu
Click to expand...
Click to collapse
Sorry mate that didn't work. Still going back to stock recovery...
Since i didn't find a solution to make the installation presistant, i went ahead and flashed Elixir with the temporarily booted TWRP. Then wiped cache and dalvik, flashed the TWRP image, formatted data and then rebooted. Now it works.
Edit: This method did something to my recovery. I can boot to system and recovery fine but TWRP isn't able to mount the data partition. So i'm not able to flash anything or root the device anymore.
I tried formatting data, no luck.
Then tried repairing the data partition. No luck.
Changed the file system to EX2 and then EX4... Nothing.
Anyone know a solution for this?
Helhound0 said:
Sorry mate that didn't work. Still going back to stock recovery...
Click to expand...
Click to collapse
Then you've got to do a flash with stock ROM and miflash via pc
Laptapper said:
Then you've got to do a flash with stock ROM and miflash via pc
Click to expand...
Click to collapse
Would that re-lock the bootloader? And if so do i have to wait 7 more days for it to be unlocked?
I used the Disable-Dm-Verity-Zip directly in TWRP after installation. Worked without a problem.
romuser87 said:
I used the Disable-Dm-Verity-Zip directly in TWRP after installation. Worked without a problem.
Click to expand...
Click to collapse
I read that somewhere too but that didn't help me at all... Maybe i have a bad zip file..
Can you share the zip you flashed?
Also, any idea how i could get this fixed:
Helhound0 said:
Since i didn't find a solution to make the installation presistant, i went ahead and flashed Elixir with the temporarily booted TWRP. Then wiped cache and dalvik, flashed the TWRP image, formatted data and then rebooted. Now it works.
Edit: This method did something to my recovery. I can boot to system and recovery fine but TWRP isn't able to mount the data partition. So i'm not able to flash anything or root the device anymore.
I tried formatting data, no luck.
Then tried repairing the data partition. No luck.
Changed the file system to EX2 and then EX4... Nothing.
Anyone know a solution for this?
Click to expand...
Click to collapse
Helhound0 said:
I read that somewhere too but that didn't help me at all... Maybe i have a bad zip file..
Can you share the zip you flashed?
Also, any idea how i could get this fixed:
Click to expand...
Click to collapse
The attached file worked for me
Helhound0 said:
Would that re-lock the bootloader? And if so do i have to wait 7 more days for it to be unlocked?
Click to expand...
Click to collapse
1. With MiFlash there is an option at the bottom of the screen to lock bootloader. Just make sure it is NOT checked, and you will be safe to use MiFlash without relocking bootloader.
2. When installing TWRP for first time, it is essential that your first reboot is straight back to TWRP - then it becomes persistent, and future reboots to recovery will be to TWRP. If you do not do the first reboot back to TWRP, the stock MIUI ROM recovery reinstalls itself.
HiQual said:
1. With MiFlash there is an option at the bottom of the screen to lock bootloader. Just make sure it is NOT checked, and you will be safe to use MiFlash without relocking bootloader.
2. When installing TWRP for first time, it is essential that your first reboot is straight back to TWRP - then it becomes persistent, and future reboots to recovery will be to TWRP. If you do not do the first reboot back to TWRP, the stock MIUI ROM recovery reinstalls itself.
Click to expand...
Click to collapse
The first ever twrp install i did, i rebooted to system by mistake but i reflashed twrp and made sure to reboot to recovery.... That was the second try. I think i may have tried at least two dozen times since that but it just kept booting back to stock recovery...
I think I'll run with this until the end of Jan and then redo everything from scratch...
Helhound0 said:
Since i didn't find a solution to make the installation presistant, i went ahead and flashed Elixir with the temporarily booted TWRP. Then wiped cache and dalvik, flashed the TWRP image, formatted data and then rebooted. Now it works.
Edit: This method did something to my recovery. I can boot to system and recovery fine but TWRP isn't able to mount the data partition. So i'm not able to flash anything or root the device anymore.
I tried formatting data, no luck.
Then tried repairing the data partition. No luck.
Changed the file system to EX2 and then EX4... Nothing.
Anyone know a solution for this?
Click to expand...
Click to collapse
I'm stuck at this stage. Have you found any solution yet?

Question RECOVERY BOOTLOOP

Hello guys!
I am having a problem updating my current TWRP (version 3.52 came from one youtuber) to TWRP 3.6/OrangeFox.
I carefully follow steps. Even extracting my own rom boot.img just to flash it in accordance to said step. I successfully flash the said recovery but when i reboot to system or power off. It just keeps booting to recovery. Hoping for some enlightenment. Thank you!
1) you did not say what steps you did, or which tutorial you followed
2) what do you need twrp for?
jjsan said:
1) you did not say what steps you did, or which tutorial you followed
2) what do you need twrp for?
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
That's the instruction given in a thread. I followed it but no luck. Keeps rebooting to recovery.
cant say if it works or not.
for rooting its better patch img and flash.
read this. there is also solution for bootloop
How To root Redmi Note 10S without TWRP (Text Guide in English)
By Following this guide, you will lose your warranty so keep that in mind before you begin. (Although you have probably already lost your warranty by unlocking the bootloader) So, if like me, you ended up buying the Redmi Note 10S because it was...
forum.xda-developers.com
jjsan said:
cant say if it works or not.
for rooting its better patch img and flash.
read this. there is also solution for bootloop
How To root Redmi Note 10S without TWRP (Text Guide in English)
By Following this guide, you will lose your warranty so keep that in mind before you begin. (Although you have probably already lost your warranty by unlocking the bootloader) So, if like me, you ended up buying the Redmi Note 10S because it was...
forum.xda-developers.com
Click to expand...
Click to collapse
I already root my device . Just confused why the posted updated TWRP and Orangefox (both by Woomy) doesn't let me boot to system.
pumpkin072618 said:
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
That's the instruction given in a thread. I followed it but no luck. Keeps rebooting to recovery.
Click to expand...
Click to collapse
hmm, you sure you actually installed the stock rom kernel?
J6idot said:
hmm, you sure you actually installed the stock rom kernel?
Click to expand...
Click to collapse
I used the extracted boot.img pulled using adb. Am i doing it right?
pumpkin072618 said:
I used the extracted boot.img pulled using adb. Am i doing it right?
Click to expand...
Click to collapse
You can download the original ROM package and extract the boot.img from it, see if it works
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com

Categories

Resources