Database Develop

Not able to install any Android 9.0 based ROM's

I dont know if this is the right place to post this issue,sorry if this violates any rules
Recently I've shifted to custom roms on my device.I've always wanted to use one of those 9.0 ROM's.I tried 2 flavours-Pixys and Havoc.Both based off 9.
I tried flashing it with TWRP 3.2.1-0,as soon as I installed and rebooted it shows me Decryption failed and proceeded to factory reset my device.I had to repair my phone's file system to EXT4 to correct it and install an 8.1 based rom
Since I thought it might have to do something with TWRP, I tried RedWolf Recovery and tried installing Pixys and Havoc only to return to the same "Decryption Failed" issue.
Is there something different that I am doing?Can anyone help me in this regard.
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?

Did you tried another recovery? Try Batik Recovery!

Anirudh15 said:
I dont know if this is the right place to post this issue,sorry if this violates any rules
Recently I've shifted to custom roms on my device.I've always wanted to use one of those 9.0 ROM's.I tried 2 flavours-Pixys and Havoc.Both based off 9.
I tried flashing it with TWRP 3.2.1-0,as soon as I installed and rebooted it shows me Decryption failed and proceeded to factory reset my device.I had to repair my phone's file system to EXT4 to correct it and install an 8.1 based rom
Since I thought it might have to do something with TWRP, I tried RedWolf Recovery and tried installing Pixys and Havoc only to return to the same "Decryption Failed" issue.
Is there something different that I am doing?Can anyone help me in this regard.
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Click to expand...
Click to collapse
Hey there, how about u try to install Pitchblack twrp the latest one and install Pixel experience pie riva, it can be used for rolex also because the developer make the rom to unified for both rolex and riva. Then install the magisk after that. I've been using pixel experience pie for a month and it is so far so good.

Amir_espie said:
Hey there, how about u try to install Pitchblack twrp the latest one and install Pixel experience pie riva, it can be used for rolex also because the developer make the rom to unified for both rolex and riva. Then install the magisk after that. I've been using pixel experience pie for a month and it is so far so good.
Click to expand...
Click to collapse
Sure,will give it a go

An update
I installed Batik recovery.Magisk could be flashed but Im still getting the decryption unsuccessful message when I install Pixys

Solved Magisk Error!
I've been using Pixys OS on my Redmi 4A and it works fine smoothly. I recommended to clean wipe before installing. Android Pie us amazing and I've installed stable version. Do backup before clean wipe.
For Magisk I recommended this: https://freaksterism.blogspot.com/2018/10/solved-cannot-mount-vendor-magisk.html?m=1
It worked for me. Also go through this step before any custom ROM. Do let me know the status

Anirudh15 said:
An update
I installed Batik recovery.Magisk could be flashed but Im still getting the decryption unsuccessful message when I install Pixys
Click to expand...
Click to collapse
to solve decryption unsuccesful message, format data (Wipe>Format Data) after installing the rom, make sure you backup your internal storage coz Format Data will also ERASE the internal storage. This how i got over the decryption unsuccessfull message. hope this helped.

You have two problems.
Anirudh15 said:
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Click to expand...
Click to collapse
You need to flash the twrp separated vendor version by my friend Offain https://androidfilehost.com/?fid=962187416754475993
The other problem with the decryption:
You must enter in the twrp press wipe and format data. Type yes and then reboot into twrp again. After that flash the rom and gapps and you will not have the decryption problem again

Anirudh15 said:
I dont know if this is the right place to post this issue,sorry if this violates any rules
Recently I've shifted to custom roms on my device.I've always wanted to use one of those 9.0 ROM's.I tried 2 flavours-Pixys and Havoc.Both based off 9.
I tried flashing it with TWRP 3.2.1-0,as soon as I installed and rebooted it shows me Decryption failed and proceeded to factory reset my device.I had to repair my phone's file system to EXT4 to correct it and install an 8.1 based rom
Since I thought it might have to do something with TWRP, I tried RedWolf Recovery and tried installing Pixys and Havoc only to return to the same "Decryption Failed" issue.
Is there something different that I am doing?Can anyone help me in this regard.
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Click to expand...
Click to collapse
I had the same problem. Its because your phone is encrypted. The only solution I found is to boot the device into fastboot and using command: [fastboot format userdata] on PC. This will wipe all data off your phone so do backup. It removes encryption and now you can install any custom rom.

Decrypt ur phone first then flash, use twrp vendor

athish said:
to solve decryption unsuccesful message, format data (Wipe>Format Data) after installing the rom, make sure you backup your internal storage coz Format Data will also ERASE the internal storage. This how i got over the decryption unsuccessfull message. hope this helped.
Click to expand...
Click to collapse
Format Data was the only thing that worked for me. First backup everything on your mass storage.

Xiaomi mi 8 se doesn't want to run any ROM

Hi, I've unlocked my xiaomi mi 8 se bootloader and i try to flash twrp recovery and xiaomi.eu rom, but every time i reboot the device he goes in bootloop and when i try to turn off the device and to acess the recovery, the device goes in bootloop. So every time I have to reinstall the recovery and then the ROM again. But for every recovery and rom i tried the device goes in bootloop. I tried every twrp on the forum and also some Rom but the device doesn't want turn on. Can you help me, pls? thanks and sorry for my english

You need to format data in twrp, reboot to recovery in twrp, do a factory reset then flash eu rom.

or use this twrp https://forum.xda-developers.com/showpost.php?p=78047648&postcount=14

luigieg said:
You need to format data in twrp, reboot to recovery in twrp, do a factory reset then flash eu rom.
Click to expand...
Click to collapse
i do, but the phone doesn't want to turn off

kakiyomi said:
or use this twrp https://forum.xda-developers.com/showpost.php?p=78047648&postcount=14
Click to expand...
Click to collapse
i already use this twrp, this time it has not been canceled

CH4nt0 said:
i already use this twrp, this time it has not been canceled
Click to expand...
Click to collapse
I had also bootloop problem but got it working with this twrp https://drive.google.com/file/d/1X39kp3oBz-SYD-fNK-uEgD6VlUUG-WMq/view
1. Boot twrp
2. Wipe -> format data then reboot, transfer rom to device, enter to fastbootmode and boot twrp again
3. install rom and after that wipe dalvik and cache
4. now it should work
The rom what i installed was xiaomi eu stable

i found another twrp and now i have xiaomi.eu dev, thanks for the help

CH4nt0 said:
i found another twrp and now i have xiaomi.eu dev, thanks for the help
Click to expand...
Click to collapse
what twrp?

I installed the twrp mentioned by maketzu111. Then I wiped data. Then rebooted into the twrp
Then I flashed "xiaomi.eu_multi_MI8SE_V10.0.1.0.OEBCNFH_v10-8.1.zip" from the miui 10.1 stable sourceforge page. It is stuck on the mi splash-logo for a very long time. what's happening?

shanty23 said:
I installed the twrp mentioned by maketzu111. Then I wiped data. Then rebooted into the twrp
Then I flashed "xiaomi.eu_multi_MI8SE_V10.0.1.0.OEBCNFH_v10-8.1.zip" from the miui 10.1 stable sourceforge page. It is stuck on the mi splash-logo for a very long time. what's happening?
Click to expand...
Click to collapse
You did format the data? What i have read it's the main reason why device goes bootloop if you didn't do that. Rom isn't installed properly if the device stuck to bootloop or in this case stucks to loading screen

I keep bricking my 9t pro, what's wrong ?

Hello,
I am trying to install lineage OS on my 9t pro, but it fails every time.
I managed to unrbick my phone thanks to miflash, but now i'm totally stuck
So, i'm on miui Global 11 QFKEUXM, and i can install twrp-3.3.1-22-raphael-mauronofrio.
Then, if I try to flash a rom with it (i also tried RevengeOS), i'm going to be stuck in a bootloop, until it goes to twrp again.
When it appens, i can't access files from my computer anymore, all folders seems to have random names like "uzehfj405Cuh5635azP5IUHDPuZ".
So i have to use miflash to go back to miui. I don't know what's wrong i've spent hours trying, can someone help me ?
Thanks and have a nice day
EDIT :
Indeed i didn't format data in TWRP. I tried to, and i'm still in that boot loop unfortunatly.
But this time, file system seems to be ok because i can access internal storage from my computer
EDIT2 :
I think the problem come from GAPPS. If i format then flash lineage without GAPPS, I can boot it
But if then i try to flash them, it won't boot anymore.
I am using the "nano" package here https://sourceforge.net/projects/opengapps/files/arm64/beta/20191114/
Is this incorrect ?

hi,
have already format data in TWRP?

BuckyBucks said:
Hello,
I am trying to install lineage OS on my 9t pro, but it fails every time.
I managed to unrbick my phone thanks to miflash, but now i'm totally stuck
So, i'm on miui Global 11 QFKEUXM, and i can install twrp-3.3.1-22-raphael-mauronofrio.
Then, if I try to flash a rom with it (i also tried RevengeOS), i'm going to be stuck in a bootloop, until it goes to twrp again.
When it appens, i can't access files from my computer anymore, all folders seems to have random names like "uzehfj405Cuh5635azP5IUHDPuZ".
So i have to use miflash to go back to miui. I don't know what's wrong i've spent hours trying, can someone help me ?
Thanks and have a nice day
Click to expand...
Click to collapse
See bro When we buy the android the the storage is
Encrypted , when you unlock the bootloader and install TWRP it doesn't decrypt the internal storage that's why only the stick rom i.e. Miui can access the storage , here is what you need to do ..
Install TWRP then go to wipe then click on format data and type yes this will decrypt the internal storage and so that any custom rom you install can access the data ..
Make sure that you format data then reboot trwp and then connect the phone to of transfer the files and install the rom and gappa it will boot just fine
Although for some reason when i install the LOS my storage gets decrypt again I say you try the EvoX rom which doesn't require gappa just flash the rom and the firmware
Also there is some force decrypt zip file that lets you decrypt the internal storage because sometime install the firmware may encrypt your storage again so flash that DFE file you will find that in telegram grp ..
Basically you can't boot into rom and see files on computer cause your storage is encrypted and only Miui can decrypt it unless decrypted ...
Hope it help

Every time when you want to flash aosp or other custom rom you need to format data ( wiping isnt enough because of encryption) when coming from stock miui or miui eu rom.
Best way is to read instruction of rom you want to install.
My steps are when coming from stock miui:
Install twrp
Boot to twrp
Format data with yes
Reboot to twrp
Copy rom you want to install to internal storage, usually you need also rom+vendor file of latest stable miui.
Flash vendor+rom of stable miui
Wipe dalvick+ cache
Flash custom rom (los, evolutionx...)
Wipe dalvick+ cache
Flash gapps if needed
Wipe dalvick + cache
Reboot to system, set your system to your liking
Then reboot to twrp to flash magisk ( if you like to be rooted, otherwise continue to use rom as is)
Best is to read install instructions of rom you want to install

ranjan_shivam said:
See bro When we buy the android the the storage is
Encrypted , when you unlock the bootloader and install TWRP it doesn't decrypt the internal storage that's why only the stick rom i.e. Miui can access the storage , here is what you need to do ..
Install TWRP then go to wipe then click on format data and type yes this will decrypt the internal storage and so that any custom rom you install can access the data ..
Make sure that you format data then reboot trwp and then connect the phone to of transfer the files and install the rom and gappa it will boot just fine
Although for some reason when i install the LOS my storage gets decrypt again I say you try the EvoX rom which doesn't require gappa just flash the rom and the firmware
Also there is some force decrypt zip file that lets you decrypt the internal storage because sometime install the firmware may encrypt your storage again so flash that DFE file you will find that in telegram grp ..
Basically you can't boot into rom and see files on computer cause your storage is encrypted and only Miui can decrypt it unless decrypted ...
Hope it help
Click to expand...
Click to collapse
Hello, thanks for taking the time to help me. I tried again formating the data, it seems a bit better (i can acces file system from my computer), but i'm still in that boot loop :/

BuckyBucks said:
Hello, thanks for taking the time to help me. I tried again formating the data, it seems a bit better (i can acces file system from my computer), but i'm still in that boot loop :/
Click to expand...
Click to collapse
Maybe it's the vendor. What device do you have (china, global, etc.)?

ef1x said:
Every time when you want to flash aosp or other custom rom you need to format data ( wiping isnt enough because of encryption) when coming from stock miui or miui eu rom.
Best way is to read instruction of rom you want to install.
My steps are when coming from stock miui:
Install twrp
Boot to twrp
Format data with yes
Reboot to twrp
Copy rom you want to install to internal storage, usually you need also rom+vendor file of latest stable miui.
Flash vendor+rom of stable miui
Wipe dalvick+ cache
Flash custom rom (los, evolutionx...)
Wipe dalvick+ cache
Flash gapps if needed
Wipe dalvick + cache
Reboot to system, set your system to your liking
Then reboot to twrp to flash magisk ( if you like to be rooted, otherwise continue to use rom as is)
Best is to read install instructions of rom you want to install
Click to expand...
Click to collapse
djoni wallauer said:
hi,
have already format data in TWRP?
Click to expand...
Click to collapse
Thanks to both of you for helping me. As i sayed, I tried to to so and now i can see the filesystem from my computer, but i'm still stuck in the bootloop

Isley_ said:
Maybe it's the vendor. What device do you have (china, global, etc.)?
Click to expand...
Click to collapse
I think it's a global one, but now i have doubts... Is there a way to be sure ?
In the MIUI i managed to flash with miflash, it's sayed MIUI GLOBAL

vladsendrix said:
if it s a mi9t pro its probbably the global version, to make sure try downloading the firmware and vendor from here https://downloads.akhilnarang.me/MIUI/raphael/ . try downloading the global and indian version and try both since you dont know whihch model you have. also dont forget to format before trying anything. hope i helped
Click to expand...
Click to collapse
I'm a bit affraid to flash indian version, it's says to not cross flash ^^

I’d flash MIUI.eu before lineage, let it boot and then do the whole process to install lineage. Yo don’t have nothing to lose.

vladsendrix said:
well i d rrecommen you put your device in fastboot, go to aXiaomiADBFastbootTools and it ll show you your model number or use TOOLSALLINONE. Search ythese on xda and youll find the links and that will definetly show you your model number
Click to expand...
Click to collapse
What fastboot commands should I use to get the model number ? I tried fastboot oem get-psid but it didnt work
When I boot MIUI, in the settings its "MIUI GLOBAL QFKEUXM". So it's correct isn't it ?

vladsendrix said:
well i d rrecommen you put your device in fastboot, go to aXiaomiADBFastbootTools and it ll show you your model number or use TOOLSALLINONE. Search ythese on xda and youll find the links and that will definetly show you your model number
Click to expand...
Click to collapse
I think the problem come from GAPPS. If i format then flash lineage without GAPPS, I can boot it
But if then i try to flash them, it won't boot anymore.
I am using the "nano" package here https://sourceforge.net/projects/ope...beta/20191114/
Is this incorrect ?

GUIDE How to Instal GSI ROM- Havoc-OS-v4.X-Official Android 11 On Redmi 8

Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com

Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer

letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....

letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery

D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry

Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !

Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer

UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...

letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?

letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems

Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...

letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)

Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...

Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .

Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.

letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse

Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .

Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?

mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11

letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.

Question Can't install custom roms after MIUI 12.5 china port (Redmi Note 10 pro India)

So I was using evolution x for a few days then I saw this MIUI 12.5 china from and tried to install it. I wiped Dalvik, cache and data then flashed the room. Unfortunately, I forgot to install magisk after that and just formatted data. I got stuck in a boot loop. Then I went back to recovery (orange fox) and it didn't recognize my internal storage (showing 0Mb). I tried installing another rom with OTG and I got this error "failed to mount system_root (no such file or directory)". System type was showing "f2fs" so I changed it to ext4. After that, I wiped everything(including internal storage) and installed the miui 12.5 china rom again then flashed magisk and formatted data. It booted and is working fine. But the problem is that recovery still doesn't recognize storage and I get the same mount errors when installing any other rom than miui. I also tried with twrp recovery but same result. So I'm basically stuck with miui and can't install anything else.

Flash stock miui using fastboot, reflash recovery and try again everything will be fine

chazy chaz said:
Flash stock miui using fastboot, reflash recovery and try again everything will be fin
Click to expand...
Click to collapse
chazy chaz said:
Flash stock miui using fastboot, reflash recovery and try again everything will be fine
Click to expand...
Click to collapse
Do I flash with mi flash or adb?

chazy chaz said:
Flash stock miui using fastboot, reflash recovery and try again everything will be fine
Click to expand...
Click to collapse
I'm getting this error when installing stock rom with mi flash "error:Not catch checkpoint (\$fastboot -s . * lock),flash is not done"

adnansamihr said:
I'm getting this error when installing stock rom with mi flash "error:Not catch checkpoint (\$fastboot -s . * lock),flash is not done"
Click to expand...
Click to collapse
if you have rmn 10 pro you have wrong rom i see the foto RKFINXM but for rmn10 pro is RKFMIXM FOR EU ONLY.

stauros2653 said:
if you have rmn 10 pro you have wrong rom i see the foto RKFINXM but for rmn10 pro is RKFMIXM FOR EU ONLY.
Click to expand...
Click to collapse
Can you link the right rom plz

adnansamihr said:
Do I flash with mi flash or adb?
Click to expand...
Click to collapse
download the full fastboot zip (4gb compressed, 8gb uncompressed), it comes with everything you need

I
adnansamihr said:
So I was using evolution x for a few days then I saw this MIUI 12.5 china from and tried to install it. I wiped Dalvik, cache and data then flashed the room. Unfortunately, I forgot to install magisk after that and just formatted data. I got stuck in a boot loop. Then I went back to recovery (orange fox) and it didn't recognize my internal storage (showing 0Mb). I tried installing another rom with OTG and I got this error "failed to mount system_root (no such file or directory)". System type was showing "f2fs" so I changed it to ext4. After that, I wiped everything(including internal storage) and installed the miui 12.5 china rom again then flashed magisk and formatted data. It booted and is working fine. But the problem is that recovery still doesn't recognize storage and I get the same mount errors when installing any other rom than miui. I also tried with twrp recovery but same result. So I'm basically stuck with miui and can't install anything else.
Click to expand...
Click to collapse
M haveing the same issue can't port or flash the arrow rom after update. Twrp can't clean flash ?? Any help

Hello...i m using note 10 pro max India...i m facing lots of issues...i can't flash any rom with twrp...its shows zip file corrupt in every rom..i flashed fastboot rom with mi flash tool...but no sound coming from the phone...any now when i go to twrp to flash other roms same issue...zip file corrupt.please help me