Hey guys, so here's my problem:
When I put my phone (TA-1052) in download/fastboot mode to unlock the bootloader, it is not recognized by my Windows 10 PC (64-bit) or Win 10 laptop (32-bit).
I've tried out different drivers and adb works fine. But as soon as I get into download mode and ask fastboot for a device list, it's gone!
The odd thing is that it doesn't show up in the device manager anymore. Windows also doesn't give the USB-connect sound when I plug in the cable.
Please help me out!
(I'm running Android Pie with the April 1st security update and I'm using the latest platform tools by Google)
Related
My Samsung Galaxy S purchased Oct 2010
Model number GT-I9000
Firmware version 2.1-update1
Baseband version I9000XXJM2
Kernel version 2.6.29
Build number ECLAIR.XWJM3
Running latest version of Samsung KIES on Windows 7. Trying to upgrade to OS to Froyo
When I connect my phone via usb I get notification
Installing device drivers
then
device driver software not successfully installed
MTP usb device Failed.
It seems Windows 7 is not recognising Android driver(s) on my phone. Is this a known/new issue? I connected my phone to a Windows XP machine and it recognised the phone straight away and was visible in KIES. Is there a setting in Windows 7 that needs to be adjusted perhaps? Can anyone offer a suggestion as to how to recify this problem?
not recognising Android driver(s) on my phone. Is this a known/new issue?
Multiple posts on the forum .
MTP usb device Failed. >>> search
jje
have you tryed to reinstall kies? and u can firs put phone on mass storage and wait to install drivers =)
I had an older version of KIES, did a search for Galaxy S updates, one of which was an updated version of KIES, now installed. I put the phone in mass storage mode, connected, then it told me to exit mass storage mode, had to disconnect in order to do so. Have searched MTP usb device on this site, read the archived entries and varied solutions, none of which work. Fairly sure its a Windows problem, because as I eluded to previously, it connects to Windows XP no problem.
Windows recognises my phone in Real Player mode, but not in KIES mode! KIES then says connection mode not supported, please connect in KIES mode, the Windows fails to recognise my phone.
rpjd said:
Windows recognises my phone in Real Player mode, but not in KIES mode! KIES then says connection mode not supported, please connect in KIES mode, the Windows fails to recognise my phone.
Click to expand...
Click to collapse
There is a lot of thread about it, but well...
Start fresh:
- Uninstall Kies (phone not connected)
- Clean your registry with ccleaner (google it)
- restart your PC
- Dowload the last 2.x Kies realeased from samsung website
- Install Kies as administrator
- Go in your SGS setting device -> Application -> devlopment -> Uncheck USB debugging
- Restart your phone (even if not needed, do it)
- When the phone is up, plug the USB cable.
No luck with that either!
rpjd said:
No luck with that either!
Click to expand...
Click to collapse
It should work no matter what:
Your windows 7 system have a problem somewhere (Drivers outdated?, antivirus?, firewall?, service not properly started? etc.. can be a lot of external things)
If you checked all that, it could be an hardware issue (i doubt that)
Are you using the stock USB cable right?
Anyway triple check everything, update, restart. It must work or you have or you are a very very very special case (i doubt that too).
Its an odd one alright
I'm reasonably confident, while not being an expert, that Windows is the problem, only wish I knew what exactly. I'm asking on Windows forums as well.
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. I downloaded the Android SDK latest and replaced the USB driver INF file with the one sony give you but it didn't work so reversed back to the other driver the SDK manager installs and that didn't work either.
I've been through the tutorials and even tried to update the driver in device manager in the few seconds it stays there but that didn't work either! USB debugging is enabled too!
Please help, I'm not a noob and have done fastboot booting before and yes for those who may ask have already checked to make sure the bootloader can be unlocked and yes it can also the phone is NOT branded and is unlocked to all networks.
Any help will be appreciated, thanks!
Dave.
Are you on Windows 8? Using USB 3.0?
"As your flesh bears the sigil....your name is that....of a recusant."
First be sure you're using a 2.0 usb port, if this is ok maybe it's a windows 8 driver problem, so you should try this http://forum.xda-developers.com/showthread.php?t=2170114. It works for me
For also fastboot and flashmode come for 5 Sec. So Make sure you prepare the file and attach the device to fastboot or flashmode when it is asked.
Still problems
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
darkdemon32 said:
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
Click to expand...
Click to collapse
Hmm...how many USB ports are being used when you're flashing the phone?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Fastboot with Xperia XP
I have the same problem, can't get it to fastboot mode.
Tried the Windows 8 zith USB 2, and also on XP machine where I was succesfully used it for a Xperia U.
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
sarkar1990 said:
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
Click to expand...
Click to collapse
Opensource forever)))
Sent from my ME371MG using xda app-developers app
same problem...
m having same kind of problem i was trying to flash boot img from cm 11 but fast boot isnt recognizing my device any more.my sp is rooted bootloader unlocked.fast boot was recognizing it yesterday.please tell me what to do
What I did was use a Windows XP machine.
Couldn't get it to work on my Windows 7/8, because of the restrictions in driver signatures.
Sent from my C5303 using Tapatalk
fastboot
darkdemon32 said:
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. .
Click to expand...
Click to collapse
I have a similar problem. the power light lights up blue then passes into the phone starts loading mode
Sorry for bad English
The updated version (09.14) don't work properly. It doesn't enable me to go to Flashmode. Uninstalled and used the previous version and it worked as it should, no issues entering Flashmode.
i might have actually found the solution. im on the 4.3fw build version 12.1.a.1.201... in my case, my pc will automatically install the drivers for mass storage giving me no chance to update the driver to the one from sony.
you need to do step 9. and 10. if you havent done so from http://unlockbootloader.sonymobile.com/instructions
what i did was allow developer settings and allow debugging via usb.
plug in and attempt to go in to fastboot and obviously it'll fail.
go to device manager. (control panel->hardware and sound->device manager) quickly scroll down go to other devices. you will see s1fastboot (or something like that) if you're quick enough, if not, in my case, the phone will go in to charging mode.
what i did was to disable xperia sp mass storage from disk drives category too.
right click on it and select update driver software and you will select the file you've unzipped (following step 9 and 10 sony's instructions).
after it has finished updating, unplug your usb and attempt to enter fastboot, it should work.
PS: im no expert, this solution might be out there somewhere already or it could just be a great coincidence. some of these steps might not be useful even.
Had this problem and found a funny solution: I switched my cable and the port I was using. Both Ubuntu and Windoze 7 failed on both fastboot and flash mode, even though in both the phone would charge. I grabbed a spare micro USB cable and plugged it into the front of the PC; voila. Now the phone is rooted and running the latest CM.
Need a final solution for this problem
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
TheTras said:
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
Click to expand...
Click to collapse
Are you trying to unlock your phone?
Have you installed device specific/fastboot/flashmode drivers via FlashTool? If you are on Windows 8/8.1, you need to disable driver verification to get it done.
Alternatively if you just wanna unlock your bootloader, you can use the BLU option in FlashTool. Again all drivers will need to be properly installed for your phone to be detected correctly.
You say you had the same problem with stock firmware which means you probably haven't setup adb/fastboot properly on your PC. Does your phone get detected correctly in Device Manager? Have you tried installing drivers via Device Manager?
....
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
TheTras said:
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
Click to expand...
Click to collapse
I meant install drivers via FlashTool. Go to C:\Flashtool\drivers or wherever you have installed Flashtool and run the Flashtool-drivers.exe.
Select flashmode drivers, fastboot drivers and common drivers viskan board (SP drivers) and install them. Like I said if you are on Win 8/8.1, you will have to disable driver signature enforcement. Just look it up in YouTube and follow a tutorial.
Hi,
After trying multiple things i have had to post a new thread.
I cannot get the fastboot drivers working.....I have just got a new alienware laptop with windows 8 x64....i do have a desktop with Windows 8 x64 and the drivers installed fine on that system, but when it comes to this new laptop there are no dice.
I have tried:
http://forum.xda-developers.com/showthread.php?t=1575100
http://forum.xda-developers.com/showthread.php?t=1982718
http://forum.xda-developers.com/showthread.php?p=43407191
I only have USB 3 ports, i have installed: HTC Driver 4.1.0.001.exe, this made the phone work fine connected when it is on to the USB.
But as soon as i go to bootloader or fastboot nothing displays,and the phone is not detected in the system manager.
Please can someone help me.
Thanks
Try this
With windows 8.1 when plugged the phone into the computer under download mode, the computer unable to recognize the device and shows it as USB not recognized.
Looking at the device manager, there is an unknown USB device (device failed enumeration).
Download mode is working on windows 7 and 8 but not 8.1. However, It seems that only our i9001 is having this problem as I have tested with S3 i9300, SL i9003, Note n7000 with the same USB cable and same port but they are all working well except i9001.
Any solution for this? I've tried using VMware to make the download mode run in virtual machine running windows 8 but no luck.
DreamerTKM said:
With windows 8.1 when plugged the phone into the computer under download mode, the computer unable to recognize the device and shows it as USB not recognized.
Looking at the device manager, there is an unknown USB device (device failed enumeration).
Download mode is working on windows 7 and 8 but not 8.1. However, It seems that only our i9001 is having this problem as I have tested with S3 i9300, SL i9003, Note n7000 with the same USB cable and same port but they are all working well except i9001.
Any solution for this? I've tried using VMware to make the download mode run in virtual machine running windows 8 but no luck.
Click to expand...
Click to collapse
Use the drivers given in the following link:
phones-usb-drivers.blogspot.com/2013/07/free-download-samsung-gt-i9000-galaxy-s.html?m=1
Same problem here
DreamerTKM said:
With windows 8.1 when plugged the phone into the computer under download mode, the computer unable to recognize the device and shows it as USB not recognized.
Looking at the device manager, there is an unknown USB device (device failed enumeration).
Download mode is working on windows 7 and 8 but not 8.1. However, It seems that only our i9001 is having this problem as I have tested with S3 i9300, SL i9003, Note n7000 with the same USB cable and same port but they are all working well except i9001.
Any solution for this? I've tried using VMware to make the download mode run in virtual machine running windows 8 but no luck.
Click to expand...
Click to collapse
Same here, Download Mode isn't working, the driver isn't recognizing the device when in download mode.
My problem is that I tried to upgrade CWM with the flashable zip and now it will not go into recovery mode either. So my solution would have been to reflash CWM with ODIN, but that's not working anymore, so... if anyone has any solution it would be greatly appreciated!
Hi
I'm trying to flash TWRP on my CHe2-L11 via adb but it gets stuck at < Waiting for any device >.
I read somewhere that is because Windows lacks the necesary drivers (although Che2-L11 is listed as "MTP" in the devices connected to my computer).
Where can I find the necessary drivers for Win10?
Thanks a lot
Best,
-a-
OK, I made a little progress I think. I'm not sure my issue is actually related to windows drivers but maybe I'm wrong.
Here's the deal:
When my phone is booted and connected to my PC,
adb device
spits up something : the phone is detected. Now after running
adb reboot bootloader
the phones reboots into bootloader mode (and displays the info that the bootloader is unlocked. But from now on,
adb device
in windows CLI outputs nothing : the phone is no longer detected.
Plus now the phone shows up as an unnknown device (fastboot2.0) in windows device manager. So? Missing driver I guess? Windows can not automatically find drivers for this...
Then it make sense that I cannot flash the custom recovery until the phone is detected again.
What should I do to have my phone detected in Windows while it is in bootloader mode?
Thanks a lot
-a-
Running windows update found a driver for
Google Android Bootloader Interface
However, ADB still cannot detect it
EDIT: Actually it works! Even though
adb devices
would not list anything when the phone was in bootloader mode, I was able to flash twrp
Problem solved!