Ok My device is Honor Play and yesterday I flashed Board Software BD 1.0.0.40 for Cor AL00 in it
I flashed this software with IDT tool for huawei
I flashed it in forced upgrade mode (i.e Via EDL point or Test Point Mode by opening back panel of device..
After flashing My device reboots with no IMEI, and unlocked bootloader and build no. is showing like Chipset Boston 7.0.0.1... And my Country Region is Changed from Indian to Chinese version... So any one Have Idea that How to go back to the Indian version again and fix it??? Please Reply
Software for Test Point Mode
Can you please upload the software for the test point Mode or EDL mode of bootloader unlocking.
The link provided in the original thread is not working so would be great if you could upload the software.
Related
Hi everybody, few months ago I bought this phone second hand, and since than, I didn't receive any software update. Now I was waiting Nougat, but I realized reading around, that, with the version I have now I won't get any OTA (probably the previous guy did something) Now my question is, how I can fix it? I have no idea if my phone is brand or not. Can I put a different version on it? i'm new to modding world, so I would really appreciate if somebody could help me with this, step by step. Thanks in advance!
Hello! The first thing you need to do is enter in "manufacturer mode" so you can see wich OEMINFO (zone of the phone. Could be Europe, China, LA....) you have.
You must dial in your phone * # * # 2 8 4 6 5 7 9 # * # *
· Option 3. Network Information Query and then
· Option 4. Vendor Country Info
There you will see, if your version is C900 as you explain:
Vendor: Your network provider (in my case Vodafone).
Country: All
And if you wanna have a European version (C432) you must see:
Vendor: hw
Country: eu
Once you have that info you could start with the flashing part. I'll try to help you find the wright post so you can perform it yourself without the problems that I found...
Kifivierito said:
Hello! The first thing you need to do is enter in "manufacturer mode" so you can see wich OEMINFO (zone of the phone. Could be Europe, China, LA....) you have.
You must dial in your phone * # * # 2 8 4 6 5 7 9 # * # *
· Option 3. Network Information Query and then
· Option 4. Vendor Country Info
There you will see, if your version is C900 as you explain:
Vendor: Your network provider (in my case Vodafone).
Country: All
And if you wanna have a European version (C432) you must see:
Vendor: hw
Country: eu
Once you have that info you could start with the flashing part. I'll try to help you find the wright post so you can perform it yourself without the problems that I found...
Click to expand...
Click to collapse
Thanks for your reply! In my case
Vendor: wind
Country: it
Ok. Now you must search for a Stock ROM thread that's called Stock Roms (https://forum.xda-developers.com/showpost.php?p=68105813&postcount=159) There you can see that the original stock rom that have your mobile is VIE-L09C113.
The next step it is to decide if you wanna stay with a branded ROM version or if you want to debrand it and change to one that have Nougat like C432 (Europe).
To do the debranding process you need your bootloader code (which Huawei can give you if you google it) or use SRK Tool. With SRK Tool you can debrand it with or without code. Without code I think that changes your IMEI (but im not completely sure about this).
Just search the P9 Plus forum and you will find lot of threads about debranding and updating from C900
Kifivierito said:
Ok. Now you must search for a Stock ROM thread that's called Stock Roms (https://forum.xda-developers.com/showpost.php?p=68105813&postcount=159) There you can see that the original stock rom that have your mobile is VIE-L09C113.
The next step it is to decide if you wanna stay with a branded ROM version or if you want to debrand it and change to one that have Nougat like C432 (Europe).
To do the debranding process you need your bootloader code (which Huawei can give you if you google it) or use SRK Tool. With SRK Tool you can debrand it with or without code. Without code I think that changes your IMEI (but im not completely sure about this).
Just search the P9 Plus forum and you will find lot of threads about debranding and updating from C900
Click to expand...
Click to collapse
First problem im unable to get the bootloader code, i'm following this guide, i log in no problem, but when i click on Unlock boatloader it send me back on the log in page, i tried already hundreds times
Okay guys I'm tired. I don't understand why it won't works : I have a brand new Huawei P9, it's a Dual Sim (L19-C185). It's not branded. My current firmware version is EVA-L19-C185B170. I don't want to root or unlock if possible, I just want EMUI 5.0. I've tried to install it (mostly firmware B385, no particular reason) by using the firmware finder, by using HiSuite and by using the "dload" method. None of it worked, it always fail when it "verifies package", or when I use the "dload" method, just after (it tells that the package I've downloaded is not compatible with the version currently installed).
I don't know what to do anymore. Why do I even don't have the OTA ? Is it still deploying ? Do you see what I'm doing wrong ?
For information I've more or less followed this tutorial : http://ministryofsolutions.com/2017...gat-b385-update-emui5-middle-east-africa.html
Note : I didn't use the absolute last version of HiSuite, but almost. Can it come from there ? When I install using Hisuite and Huawei Adapter, Huawei Adaptater warn me that it coudl brick my device since I checked "custom rom" (which make me thinks that it should force the flash), HiSuite tells me that it installed successfully, but my phone just says that the package is incorrect. But it IS the correct package. I did all of this for numerous other brands, but now I don't know what to do anymore.
So, I sent the phone back.
I realized that, even if the firmware was EVA-L19-C185B170, it was actualy a TL00. I think that TL00 is specific to China Mobile (or perhaps other Chinese providers) and that they haven't develloped an official rom for this phone. On my phone, EVA-L19 was somehow flashed, and the bootloader was locked, which means that the vendor successfuly crossflashed a rom that was not intented for this model, without unlocking the phone, or by unlocking and then relocking the phone. If I believe this forum, both methods are currently unknown. However the fact that I had this phone prove that at least one of those two methods is possible. Perhaps more information can be found on the Chinese web. Knowing none of these method, and being unable to update (the low-level software somehow know that my phone is an LT00, and won't update to a firmware which isn't. No LT00 Nougat seems to exists. So I was ****ed) and not willing to unlock the bootloader to try flash without any garantee (I think that hardware are the same, so flashing a L19 Nougat should be fine however), I send back the phone, and bought another, which seller garanteed me it was a L19.
If you run into the same issues, Good luck.
Same Issue with Me
I have been trying to find an upgrade. And my phone is on same firmware as you mentioned. Even I have bought it online from China, and i suppose I am facing the same problem, about it being an original TL00, but tweaked to L19.
I cant send the phone back as i reside in another country!!
Any possible solutions you may suggest?
Can anyone please help with the same..!!
Hello
As indicated in the title, I have a huawei p9 L09 cust 40, the wifi and BT are not working, I don't know if it's a hw or Fw problem, so I'm trying to update to nougat or any other firmware to find out if it's a sw problem, but I've tried too many firmwares and the flashing process fails. Current firmware build number is: EVA-L09C40B196.
1- What Firmware should I use to upgrade to any other version of Marshmallow or to nougat?
2- Can I change the cust number to get more compatible firmwares and how to do so?
I've created a huawei ID inorder to unlock my bootloader, but when I try to login using this id, the site tells me that either the id or the password is wrong, while I've used this ID in my P9 without any error! what's wrong?
Regards
I had trouble with getting bootloader code too. I got my bootloader code by emailing Huawei direct through the hiCare app. Got it within 2 days. Hope this helps.
hi guys
i accidentally locked my bootloader while flashing the official global rom tried to flash official again and the recovery says its not supported
sadly my device is now bricked and cant open the bootloder due to (bricking my phone)
my phone is originaly the Chinese version . i thought of flashing Chinese official version will it work ??
please help guys
any answer will help me all i need is to boot my phone up
Hi.
I tried to downgrade firmware to android 8 and i bricked this phone. Can i have explanation in regards to firmware number. My mate 20 lite has model number sne-Lx1.
When i tried downgrade from firmware 9.1 to 9.0.1, firmware said sne-L01and that went through ok. When i did from 9.0.1 to 8
Firmware said sne-L21 and that bricked my phone.
What is going on with this numbers sne-Lx1,L01,L21. Can someone explain
Also there sne-Lx1,Lx2,LX3 but i think that is just different gsm bands
damtom85 said:
Hi.
I tried to downgrade firmware to android 8 and i bricked this phone. Can i have explanation in regards to firmware number. My mate 20 lite has model number sne-Lx1.
When i tried downgrade from firmware 9.1 to 9.0.1, firmware said sne-L01and that went through ok. When i did from 9.0.1 to 8
Firmware said sne-L21 and that bricked my phone.
What is going on with this numbers sne-Lx1,L01,L21. Can someone explain
Also there sne-Lx1,Lx2,LX3 but i think that is just different gsm bands
Click to expand...
Click to collapse
What did you use to downgrade it?
Otg + memory stick
Where can i get firmware in xml form ?
I downloaded sne-L21 1.0.0.26 8.1.0 R1 emui 8.2 05022JWJ from romprovider website but when i try to loaded to IDT 2.0.0.9 error comes up secure_storage_sparse_crc33c.img is missing but when i check it is actually there so i suspect image might be damaged.
Phone is already in test point mode and from romprovider.com guide says i need to use IDT to flash bricked mate 20 lite