Note:
- I am not responsible for anything that goes wrong with your device, bootloops, bricks, paperweights etc... Nothing should go wrong but hey i need to include this. If you need any help i will try my best to help you to fix it if you comment.
(Downloads at the bottom of this post in the attached files)
Should work with every Razer Phone 2
Installation:
Open Magisk Manager and head to the Modules page
Click on the plus(+) and select the file you want to install
To install more than one file, after one module has installed go back and redo the same process with the other file you downloaded
The Viewfinder Fix: Download Link If XDA Is Broken
It will replace your tuned camera file with the file that razer used in android OREO as that one has no issues with the viewfinderIssues: None that i know of so far, if you notice anything you can mention it in the comments but it is likely i cannot fix it
The EIS Fix: Download Link If XDA Is Broken
EIS (Electronic Image Stabilisation) helps your videos look more stable, by default this is only available at 30fps and only in some apps. However, with this fix EIS will be enabled in any app that asks for it and it will work at 1080p 60fps.Make sure to not use the stock camera app with this but instead a gcam with 60fps support for this phone (like BSGs)Issues: It will break 4k 60fps recording, it just won't work. Also it will break 1080p 60fps recording on the front camera.
And finally, yes of course these modules work together
Also if you need anything else or want to join the Razer Phone community join our group on Telegram!
thanks!
Why is this needed? Can you provide any context? Are these features broken on stock, or just in Gcam?
MishaalRahman said:
Why is this needed? Can you provide any context? Are these features broken on stock, or just in Gcam?
Click to expand...
Click to collapse
on stock the camera viewfinder is blurry and colours smudge, making 3rd party apps like Instagram very bad with recording videos and not being able to see well on on what you're taking a picture of.
This issue came around with the pie update for razer phone 2 so I managed to fix the viewfinder issue by using the razer libs from android OREO.
This is for every app, not just gcam.
The EIS fix allows for video stabilization at 1080p 60fps.
Usyless said:
on stock the camera viewfinder is blurry and colours smudge, making 3rd party apps like Instagram very bad with recording videos and not being able to see well on on what you're taking a picture of.
This issue came around with the pie update for razer phone 2 so I managed to fix the viewfinder issue by using the razer libs from android OREO.
This is for every app, not just gcam.
The EIS fix allows for video stabilization at 1080p 60fps.
Click to expand...
Click to collapse
Thanks for the explanation. Do you have any videos/photos to show the fix in action? Or can anyone else confirm this works? Cheers!
MishaalRahman said:
Thanks for the explanation. Do you have any videos/photos to show the fix in action? Or can anyone else confirm this works? Cheers!
Click to expand...
Click to collapse
I am outside right now but I will upload a comparison video later as I am recording some right now
MishaalRahman said:
Thanks for the explanation. Do you have any videos/photos to show the fix in action? Or can anyone else confirm this works? Cheers!
Click to expand...
Click to collapse
I have made a couple comparison videos and here they are: (read the description of each as it describes what to look for if it is not immediately visible)
1. Stock Camera Libs through the gcam viewfinder
2. My module through the gcam viewfinder
3. Stock Camera libs recording a video of snapchat (it just records the viewfinder)
4. My module recording the same video in snapchat
Even with the low youtube quality as of now (still processing probably) the changes are noticeable
MishaalRahman said:
Thanks for the explanation. Do you have any videos/photos to show the fix in action? Or can anyone else confirm this works? Cheers!
Click to expand...
Click to collapse
Using both of these and my gcam is much better. Viewfinder no longer has a ghosting effect, colors are better, and stabilization works.
Usyless said:
Note:
- I am not responsible for anything that goes wrong with your device, bootloops, bricks, paperweights etc... Nothing should go wrong but hey i need to include this. If you need any help i will try my best to help you to fix it if you comment.
(Downloads at the bottom of this post in the attached files)
Should work with every Razer Phone 2
Installation:
Open Magisk Manager and head to the Modules page
Click on the plus(+) and select the file you want to install
To install more than one file, after one module has installed go back and redo the same process with the other file you downloaded
The Viewfinder Fix: Download Link If XDA Is Broken
It will replace your tuned camera file with the file that razer used in android OREO as that one has no issues with the viewfinderIssues: None that i know of so far, if you notice anything you can mention it in the comments but it is likely i cannot fix it
The EIS Fix: Download Link If XDA Is Broken
EIS (Electronic Image Stabilisation) helps your videos look more stable, by default this is only available at 30fps and only in some apps. However, with this fix EIS will be enabled in any app that asks for it and it will work at 1080p 60fps.Make sure to not use the stock camera app with this but instead a gcam with 60fps support for this phone (like BSGs)Issues: It will break 4k 60fps recording, it just won't work. Also it will break 1080p 60fps recording on the front camera.
And finally, yes of course these modules work together
Also if you need anything else or want to join the Razer Phone community join our group on Telegram!
Click to expand...
Click to collapse
Which camera version are you using? The 7.4 version doesnt with when i want to use video and the 7.3 versions all crash instantly on startup same as 7.2.
Danishblunt said:
Which camera version are you using? The 7.4 version doesnt with when i want to use video and the 7.3 versions all crash instantly on startup same as 7.2.
Click to expand...
Click to collapse
Impossible, are you using BSGs cameras? also disable the EIS fix to check if it is that one.
Is it the EIS FIX of VF FIX doing it? and which gcams did you try (by which modder)
Usyless said:
Note:
- I am not responsible for anything that goes wrong with your device, bootloops, bricks, paperweights etc... Nothing should go wrong but hey i need to include this. If you need any help i will try my best to help you to fix it if you comment.
(Downloads at the bottom of this post in the attached files)
Should work with every Razer Phone 2
Installation:
Open Magisk Manager and head to the Modules page
Click on the plus(+) and select the file you want to install
To install more than one file, after one module has installed go back and redo the same process with the other file you downloaded
The Viewfinder Fix: Download Link If XDA Is Broken
It will replace your tuned camera file with the file that razer used in android OREO as that one has no issues with the viewfinderIssues: None that i know of so far, if you notice anything you can mention it in the comments but it is likely i cannot fix it
The EIS Fix: Download Link If XDA Is Broken
EIS (Electronic Image Stabilisation) helps your videos look more stable, by default this is only available at 30fps and only in some apps. However, with this fix EIS will be enabled in any app that asks for it and it will work at 1080p 60fps.Make sure to not use the stock camera app with this but instead a gcam with 60fps support for this phone (like BSGs)Issues: It will break 4k 60fps recording, it just won't work. Also it will break 1080p 60fps recording on the front camera.
And finally, yes of course these modules work together
Also if you need anything else or want to join the Razer Phone community join our group on Telegram!
Click to expand...
Click to collapse
Usyless said:
Impossible, are you using BSGs cameras? also disable the EIS fix to check if it is that one.
Is it the EIS FIX of VF FIX doing it? and which gcams did you try (by which modder)
Click to expand...
Click to collapse
Using BSG 7.4 latest release, only got the VF Fix as I would like to shoot 4k.
I'm using:
https://f.celsoazevedo.com/file/cfiles/gcm1/MGC_7.4.104_V0a.apk
Danishblunt said:
Using BSG 7.4 latest release, only got the VF Fix as I would like to shoot 4k.
I'm using:
https://f.celsoazevedo.com/file/cfiles/gcm1/MGC_7.4.104_V0a.apk
Click to expand...
Click to collapse
You on android 9 or 10? also try disable it and see if it works.
also try re downloading it as maybe it got corrupted
Usyless said:
You on android 9 or 10? also try disable it and see if it works.
also try re downloading it as maybe it got corrupted
Click to expand...
Click to collapse
Am on stock rom Pie and did redownload and try without ur mods.
Danishblunt said:
Am on stock rom Pie and did redownload and try without ur mods.
Click to expand...
Click to collapse
okay so,
1. does it work without the mods?
2. I've had testers and it all works on stock rom and android 10
3. does the redownloaded one work?
4. if you use a social media app like Instagram does it work?
Usyless said:
okay so,
1. does it work without the mods?
2. I've had testers and it all works on stock rom and android 10
3. does the redownloaded one work?
4. if you use a social media app like Instagram does it work?
Click to expand...
Click to collapse
1.) Camera works on stock camera app, instagram, facebook, gcam 6.1.
2.) Doesnt work with gcam 7.4 with or without mods
3.) redownloaded and reinstalled 3 times, clean install.
Danishblunt said:
1.) Camera works on stock camera app, instagram, facebook, gcam 6.1.
2.) Doesnt work with gcam 7.4 with or without mods
3.) redownloaded and reinstalled 3 times, clean install.
Click to expand...
Click to collapse
it seems more of like an issue with your phone or something as I've not heard of anybody having problems with the viewfinder fix.
about the 7.4 gcam, try BSGs latest version from celsoazevado, it should be labelled test
also you said the camera works in social medias, is that with or without the viewfinder fix
Usyless said:
it seems more of like an issue with your phone or something as I've not heard of anybody having problems with the viewfinder fix.
about the 7.4 gcam, try BSGs latest version from celsoazevado, it should be labelled test
also you said the camera works in social medias, is that with or without the viewfinder fix
Click to expand...
Click to collapse
I don't see the latest version being labelled as test. Maybe you're talking about one of those that are labelled as test?
Danishblunt said:
I don't see the latest version being labelled as test. Maybe you're talking about one of those that are labelled as test?
Click to expand...
Click to collapse
seems it got deleted then, join the telegram channel with the version available there, https://t.me/razer_phone
you can also get more help there
Related
Slow motion is working in 480p SD.
Check this out.
flash using TWRP.
this
Are u already test it ?
Sent from my Redmi 4X using XDA Labs
I have tried it and everything works, except I got greeny screen when I shot the slowmo video.
Did anyone get the same problem?
plokyz said:
Are u already test it ?
Click to expand...
Click to collapse
Tested.
fredyhand said:
I have tried it and everything works, except I got greeny screen when I shot the slowmo video.
Did anyone get the same problem?
Click to expand...
Click to collapse
Use new GCam version, it doesn't have greenish screen.
I flashed it with TWRP on newest xiaomi.eu v 7.11.9 but i can´t find any difference
Edit: I´m sorry. The new icon was on a new side, i found it now. *blame
Everything works fine, ´til now no issues!
Works but keep on crashing...
vicky083_ said:
Works but keep on crashing...
Click to expand...
Click to collapse
change settings, its working perfectly without any crash.
priyeshydv said:
change settings, its working perfectly without any crash.
Click to expand...
Click to collapse
Can you please tell me the exact setting which you are using bro and the latest version of gcam with download link if possible... I think the gcam in the post is not the latest one...
vicky083_ said:
Can you please tell me the exact setting which you are using bro and the latest version of gcam with download link if possible... I think the gcam in the post is not the latest one...
Click to expand...
Click to collapse
I flashed from aboved link and it works without any issues. I´m using default settings (Nexus 6P)...
Lemmy554 said:
I flashed from aboved link and it works without any issues. I´m using default settings (Nexus 6P)...
Click to expand...
Click to collapse
Tried it again... It just keeps on crashing... Sometimes it works.. But most of the time it crashes.. And tried slow motion video it records with 120 fps but there is greenish tint on the screen...
vicky083_ said:
Tried it again... It just keeps on crashing... Sometimes it works.. But most of the time it crashes.. And tried slow motion video it records with 120 fps but there is greenish tint on the screen...
Click to expand...
Click to collapse
Download latest Gcam from link
Not working for me on the developer ROM. Crashes as soon as you open it. Tried downloading from the link again and same problem...
How do I uninstall?
pyshydv said:
change settings, its working perfectly without any crash.
Click to expand...
Click to collapse
can you share a screenshot , what exactly the setting is
Mine crashes as soon as you open it, can't even get into the settings!
stevenlopes92 said:
can you share a screenshot , what exactly the setting is
Click to expand...
Click to collapse
Use Gcam 5.1 after flashing given module.
zkadwa said:
Mine crashes as soon as you open it, can't even get into the settings!
Click to expand...
Click to collapse
Flash cam2api first
Hi guys , please link me a working version of google cam , and the install instructions.... I know Iknow I could find it on my own , but Ive tried hundreds of versions , but I always ended up with not working video recording and force closes
Help me please
Kecoe said:
Hi guys , please link me a working version of google cam , and the install instructions.... I know Iknow I could find it on my own , but Ive tried hundreds of versions , but I always ended up with not working video recording and force closes
Help me please
Click to expand...
Click to collapse
My version of GCam works great. Slow motion and 60fps videos are supported.
Only issue is that it crashes sometimes while opening.
App Name - Camera
Package Name - com.google.android.MGCBMod
Version - 4.4.020.163412804.4.2
Everything depends upon settings in app.
Model - NEXUS 6P
System level override - NEXUS 2015
Config camera - NEXUS 6 HDR + AUTO
Buffer size - 15 optimal
Total image reader - 15 others
HDR + burst frame count - 7 (N6P + Allpixel+allexp)
Set Back camera resolution to SD 480p whenever you want to shoot a slo-mo video.
Back cam and slo mo working fine!
but front cam produce blue colour image
i used latest gcam
pls help me to fix it
thank you!
vikasgautam said:
My version of GCam works great. Slow motion and 60fps videos are supported.
Only issue is that it crashes sometimes while opening.
App Name - Camera
Package Name - com.google.android.MGCBMod
Version - 4.4.020.163412804.4.2
Everything depends upon settings in app.
Model - NEXUS 6P
System level override - NEXUS 2015
Config camera - NEXUS 6 HDR + AUTO
Buffer size - 15 optimal
Total image reader - 15 others
HDR + burst frame count - 7 (N6P + Allpixel+allexp)
Set Back camera resolution to SD 480p whenever you want to shoot a slo-mo video.
Click to expand...
Click to collapse
And where can I get this version? Thanks for the help tho
Pls suggest / link for gcam for sirocco
Download from here, work perfect: https://f.celsoazevedo.com/file/gcamera/GCam_6.1.021_N7P_test2.1_defaultjpg.apk
Link is from this theme: https://community.phones.nokia.com/...or-the-google-camera-port-for-nokia-8-sirocco
All versions from back.rider are working fine.
https://www.celsoazevedo.com/files/android/google-camera/dev-backrider/
Hello, did anybody found a working version of GCam for Nokia 8 Sirocco after the recent update to Android 10? I tried many apps suggested in the Nokia 7 Plus thread, as it's supposed to have the same internals but no success. I disabled battery optimization. The app starts once, I allow it everything and afterwards it just crashes. The only port, which was semi-successful was KillerCam_V1-Final_SA10.apk based on GCam 6.1 (I can't post a link, sorry) I'm able to capture a movie but not a photo. I can make panoramas and use the lens blur but not normal photos or portraits. The version based on GCam 7.2 crashes like all other ports. Did anybody else had more luck?
EDIT: I also set it like recommended in this post:
Killer Mod mandatory settings
1."Fix tap on focus" should be Enabled
2."Buffer Fix" should be Enabled
3."Using Sabre" should be Never
4."Max allowed memory" its upto you allow as maximum as you can. In my case 1680
Restart Your Device
Click to expand...
Click to collapse
The app is still not able to take photos.
It's not working because hmd disabled Raw Capture with the update, gcam needs raw for HDR+ and...well everything computational.
kapor82 said:
It's not working because hmd disabled Raw Capture with the update, gcam needs raw for HDR+ and...well everything computational.
Click to expand...
Click to collapse
Can Raw Capture be enabled somehow on rooted devices?
there's a way to prevent gcam from crashing described on the Nokia Community board (can't post a link because I just registered):
1. Install KillerCam_V1.5_Revolution_6.1.021.apk
2. Go to app details and force stop Killer Cam
3. Clear all app data from Killer Cam
4. Start Killer Cam and confirm access to location etc.
5. Close Killer Cam
6. Install Gcam_6.1.021_Advanced_V1.6-Fu24_5Lens-02b6.5-A10.apk
this does result in a working, usable app at least, but still without RAW support of course.
It doesn't crash but what's the point without HDR+, portrait and night shot.
Better of to install gcam go
kapor82 said:
It's not working because hmd disabled Raw Capture with the update, gcam needs raw for HDR+ and...well everything computational.
Click to expand...
Click to collapse
kapor82 said:
It doesn't crash but what's the point without HDR+, portrait and night shot.
Better of to install gcam go
Click to expand...
Click to collapse
Thank you for the answer, but what is the point of installing GCam Go? To me it behaves the same way as the broken GCam.
pandronic said:
Can Raw Capture be enabled somehow on rooted devices?
Click to expand...
Click to collapse
Could work based on these methods 1.https://www.thegeeksclub.com/how-to-enable-camera2-api-in-android-phones/
2. https://www.quora.com/How-can-I-enable-Camera2-API-and-shoot-RAW-on-Android
Opa_Apo said:
Thank you for the answer, but what is the point of installing GCam Go? To me it behaves the same way as the broken GCam.
Click to expand...
Click to collapse
GCam Go is pretty decent for me. Not as good as GCam on Pie, but certainly better than the potato quality of Nokia's Camera app.
pandronic said:
GCam Go is pretty decent for me. Not as good as GCam on Pie, but certainly better than the potato quality of Nokia's Camera app.
Click to expand...
Click to collapse
Gcam without HDR is same as stock Camera.
RAW Capture is disabled in Sirocco and is enabled in 7 Plus. I suggest everyone to contact them and tell about it.
I think it is end of the line for nokia 8 sirocco
PavilionDV said:
Gcam without HDR is same as stock Camera.
RAW Capture is disabled in Sirocco and is enabled in 7 Plus. I suggest everyone to contact them and tell about it.
Click to expand...
Click to collapse
I don't know, the pictures looked a little clearer, but maybe it was just in my head. I'll take some more pictures with GCam Go and report back.
ghaem.ghozat said:
I think it is end of the line for nokia 8 sirocco
Click to expand...
Click to collapse
Pie worked great. I think I'll try to downgrade.
After new security update none of camers app worked.even stock camers app.
Update : After 2 restart problem fixed
GCam Go work without problems.
valyo_bg said:
GCam Go work without problems.
Click to expand...
Click to collapse
No HDR in GCam Go.Video stabilization is bad and no night mode.
This is true, but GCam Go work better than original Camera software from Nokia.
valyo_bg said:
This is true, but GCam Go work better than original Camera software from Nokia.
Click to expand...
Click to collapse
This method gcam app works better than Go cam, at least there is video stabilization .
1. Install KillerCam_V1.5_Revolution_6.1.021.apk
2. Go to app details and force stop Killer Cam
3. Clear all app data from Killer Cam
4. Start Killer Cam and confirm access to location etc.
5. Close Killer Cam
6. Install Gcam_6.1.021_Advanced_V1.6-Fu24_5Lens-02b6.5-A10.apk
This is a support thread for apks created by NOVa. Here you'll find basic instructions on how to use this port and how to properly report bugs.
Compatibility:
- The camera2 api needs to be enabled;
- Most versions only work on Snapdragon SoCs, but some work on Mediatek and Exynos processors;
- 64 bit ROMs are a requirement;
- Newer versions may work only on new Android versions. Old versions might be better for old Android versions;
Bugs
Night Scape Crash Sometime
Downloads:
https://drive.google.com/file/d/109m3dYoQD6VN8o9atiH6Sc-DnG5hJXM5/view?usp=drivesdk
Donations:
If you want to say "thanks" to Nova, use his donation link:
-*PAYTM SCAN THE QR CODE https://drive.google.com/file/d/10DOkioVIJZyMOVyiQrDrrTlw9TomShNf/view?usp=drivesdk
How to report bugs:
If possible, post on a thread for BUGS
- Phone, ROM, any fixes installed;
- Name of the apk you're using;
- Screenshots or video recordings of the bug if you're able to;
- Mention @KSUBROTO*username;
- Your report will be ignored if no logs or a good explanation is provided.
- @KSUBROTO will do his best to fix bugs, but keep in mind that this is a free port and he also has his personal life.
portrait not working
seeker07 said:
portrait not working
Click to expand...
Click to collapse
Which Devices
KSUBROTO said:
Which Devices
Click to expand...
Click to collapse
realme 3
but it works when i restore my old gcam config file
seeker07 said:
realme 3
but it works when i restore my old gcam config file
Click to expand...
Click to collapse
Thanks for Feedback
1080p recording supported? Pls send some example captures thanks.
yametekudasai said:
1080p recording supported? Pls send some example captures thanks.
Click to expand...
Click to collapse
Please Send Same Good Shot Send to me I will add on my post
Working partly on Umidigi F1 Play
@KSUBROTO: Your apk from the first post is working with the Umidigi F1 Play.
What is not working is the video (crash), the night mode (no picture), the slow-mo (crash), photobox (crash), and the portrait (no picture).
All other stuff works on both cameras (rear and front). The second rear cam is not used/working.
Thanks a lot for your work!
RapidOne said:
@KSUBROTO: Your apk from the first post is working with the Umidigi F1 Play.
What is not working is the video (crash), the night mode (no picture), the slow-mo (crash), photobox (crash), and the portrait (no picture).
All other stuff works on both cameras (rear and front). The second rear cam is not used/working.
Thanks a lot for your work!
Click to expand...
Click to collapse
Use ConfigFile
KSUBROTO said:
Use ConfigFile
Click to expand...
Click to collapse
Hi!
Sorry, which config file?
HusbanJ said:
Hi!
Sorry, which config file?
Click to expand...
Click to collapse
Check My Other Post
Hi everyone. I'm using the new Poco X3 since yesterday and it's a blast. Do you know of any GCam port available for this phone?
I Used Google and it gave me
www.cyanogenmods.org/google-camera-poco-x3-nfc/
I'm using the mentioned urnyx05 with given config.
No Problems Up to now and great Pictures
Komger said:
I Used Google and it gave me
www.cyanogenmods.org/google-camera-poco-x3-nfc/
I'm using the mentioned urnyx05 with given config.
No Problems Up to now and great Pictures
Click to expand...
Click to collapse
Which one there are 5 different urnyx05 download options? ^^
Also thx for the link!
Onecton said:
Which one there are 5 different urnyx05 download options? ^^
Also thx for the link!
Click to expand...
Click to collapse
I started with the 1.6a, but within the App he mentioned the New Version 2.2 found here
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1343/
The config keeps the same
Is it worth changing over, do you think?
MarkRobert said:
Is it worth changing over, do you think?
Click to expand...
Click to collapse
You can Install it without Any risk additionally to the MIUI Cam and try it.
In my oppinion everyone Sees a Picture different, so try it an decide for yourself which Looks better for you
Use Nikita Gcam
https://www.celsoazevedo.com/files/android/google-camera/dev-Nikita/
There are two comparison videos on youtube:
https://www.youtube.com/watch?v=zI_rQiASAN4
https://www.youtube.com/watch?v=c2Btn5px8pg
Gcam needs work, stock camera looks better in many cases, especially at night.
433Mhz said:
There are two comparison videos on youtube:
Gcam needs work, stock camera looks better in many cases, especially at night.
Click to expand...
Click to collapse
Thanks for the videos, might wait a bit then. But the selfie camera is way better with GCam though.
gcam version: GCam_7.3.018_Urnyx05-v2.2-fix.apk
Cons:
0,6x is Macro sensor and
, 2x is actually UltraWide
No UltraWide/Macro Video
No 64M mode
No Bulb Flash in photo mode
Macro is better in stock
Pros
Sharper in low light than stock
UltraWide NightSight works, stock nightmode only in main camera
Less chromatic aberration
Focus tracking in photo mode (need testing)
creared question se below
Same bug here, wide and macro are changed (v2.2 with no extra config)
magikyr said:
sure ?
0,6x looks like Ultrawide (zoom out)
and 2x looks like a zoom in ( Makro ?)
Click to expand...
Click to collapse
I'm sure. Also updated the other post
bacitoto said:
I'm sure. Also updated the other post
Click to expand...
Click to collapse
sorry my false ...
i have mean the stock cam
the first 2 post was double post sorry i cant edit the first one ...
A quick question here.
Gcam must be adapted for each device, right?
What's the point of using gcam if there's not a device-specific gcam for us yet? At least afaik
hachuwaka said:
A quick question here.
Gcam must be adapted for each device, right?
What's the point of using gcam if there's not a device-specific gcam for us yet? At least afaik
Click to expand...
Click to collapse
There are still some slight advantages besides interface
https://forum.xda-developers.com/showpost.php?p=83545003&postcount=10
And you can check comparison videos to
Edit: here are some night pics:
btw for those interested, I managed to adapt a config from K30 in Wichaya's cam (most work is camera IDs, all quality settings and such are my preference, but didn't go into the advanced ones, for AWB I used the "most similar" camera setting, which is the poco x2 one) not sure if the best or not, feel free to edit the config, and share the config with us if you are good with photo settings )
Everything I tested (macro, 0.6) is working (mostly similar to what bacitoto posted, except cameras have the right "name"), except:
1- Bokeh effect in portrait mode (idk if that gcam can support it, no slider i think)
2- Zoom bug in front-camera VIDEO recording (there's a workaround, just zoom upto 1.01 and it works fine, 1.00/default zoom looks like 500.00 zoom :S).
3- Macro/0.6 crash on video, but I think stock camera doesn't support that aswell?
4-other things i'm not even aware they exist?
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1348/
+attachment
+see guide here to import config https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
i'm not an expert, but works
for me, gcam is years away versus stock camera, at least when taking photos at my floor :S (it has wooden details and such)
PS: You might want to use 4:3 instead of 16:9, 16:9 loses too many MPs
Black_ice_Spain said:
btw for those interested, I managed to adapt a config from K30 in Wichaya's cam (most work is camera IDs, all quality settings and such are my preference, but didn't go into the advanced ones, for AWB I used the "most similar" camera setting, which is the poco x2 one) not sure if the best or not, feel free to edit the config, and share the config with us if you are good with photo settings )
Everything I tested (macro, 0.6) is working (mostly similar to what bacitoto posted, except cameras have the right "name"), except:
1- Bokeh effect in portrait mode (idk if that gcam can support it, no slider i think)
2- Zoom bug in front-camera VIDEO recording (there's a workaround, just zoom upto 1.01 and it works fine, 1.00/default zoom looks like 500.00 zoom :S).
3- Macro/0.6 crash on video, but I think stock camera doesn't support that aswell?
4-other things i'm not even aware they exist?
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1348/
+attachment
+see guide here to import config https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
i'm not an expert, but works
for me, gcam is years away versus stock camera, at least when taking photos at my floor :S (it has wooden details and such)
Click to expand...
Click to collapse
Download for xml not working
jassu said:
Download for xml not working
Click to expand...
Click to collapse
added zip
I've swapped to arnova gcam using pachenko's config (htcmania) tho, he knows better about libpatcher configs, and in arnova there's no front zoom bug (it has a workaround here anyways, so experience is similar)
Can you share the config and the apk?
Since there was no fix, provided by Realme, for the quality of the audio in videos recorded with the stock camera app, and unlocking the bootloader is still not available for the RMX3311 (EU) the only way to improve the audio was to modify another camera app, without loosing stock camera features, like 60fps, stabilization, etc.
So, I've decompiled and modified the GCam port from SHAMIM (SGCAM) and changed the audio source from "Camcorder" to "Voice recognition" (see https://developer.android.com/reference/android/media/MediaRecorder.AudioSource), is not perfect but much better than stock.
I've also included the configuration xml for SGCAM 8.4 with basic settings for Realme GT2 so the quality of photos and videos be similar to the stock camera.
Working (after importing my config xml) :
- Back (main) camera: FHD videos 30/ 60fps, 4k 30fps, image quality equal to stock camera
- Improved sound quality in video recordings for front and back camera
- Front camera 60fps
Not working:
- Slow motion (works partially)
- Aux cameras (wide and macro)
- HDR+ or HDR+Enhanced if activated the colors are bad, inaccurate, too artificial. Can be improved but I personally like the results without hdr+, so I don't care to make them work.
I've created two builds because the recorded audio channels are reversed, (android 13, fw c.06), you can check using stock sound recorder, if you speak to top mic the sound plays on bottom speaker, mono for current situation (with reversed channels) and stereo for when (if) they will fix the channels order.
Install instructions:
1. Download the modified SGCAM from here:
mono: https://uploadnow.io/f/G4Ctrh7
or
stereo:
https://uploadnow.io/f/lJBRS1t
2. Download the Realme GT2 config file for SGCAM 8.4: Lcfg1.xml (attached to this post)
3. Install SGCAM, open once, allow permissions, (needed to create folders for configs)
4. Copy Lcfg1.xml to [phone internal storage]/SGCAM/XML/Lcfg1.xml
5. Import Lcfg1.xml by double tapping the blank space between shutter button and switch camera button (see the attached screenshot)
6. Leave a message if it helped you
reserved
Will test, nice work. Still angry at Realme for crippling the device like this.
This is sooooooooooo much better
In case if someone wonders, there is a xml for the GT 2 Pro, which the ultrawide camera works with, and it also works on our GT 2, but the picture quality is very low and noisy.
https://forum.xda-developers.com/t/gcam-for-realme-gt2-pro.4429173/post-87701663
It is in the attachments.
@hdavid1 For the aux cameras (wide and macro) to work you need GCAM, with package name com.ss.android.ugc.aweme But those have an issue, the photos taken with the main camera are shifted to the right (they have a black border on the left) - tested only on my GT2.
hdavid1 said:
In case if someone wonders, there is a xml for the GT 2 Pro, which the ultrawide camera works with, and it also works on our GT 2, but the picture quality is very low and noisy.
https://forum.xda-developers.com/t/gcam-for-realme-gt2-pro.4429173/post-87701663
It is in the attachments.
Click to expand...
Click to collapse
just tested that xml file and it's not working. My SGCAM build is not derived from the com.ss.android.ugc.aweme package, because of the reason posted above.
wizard8400 said:
just tested that xml file and it's not working. My SGCAM build is not derived from the com.ss.android.ugc.aweme package, because of the reason posted above.
Click to expand...
Click to collapse
hi there i have the gt but the 1 with the same audio issue i can open the bootloader so i can fix it but i dont know how can you provide me some guidence pls?
@alex61194, I didn't understand your request. Can you rephrase, please. And use punctuation, it really helps
wizard8400 said:
@alex61194, I didn't understand your request. Can you rephrase, please. And use punctuation, it really helps
Click to expand...
Click to collapse
sry, tipped too fast, i have the realme gt 5g, and have the same issue as your phone but in my case i can open the bootloader and be root, but i dont know what i have to change to fix the mic issue(i saw i have to edit mixed_paths.xlm), honestly i dont care about video but about voice recording in general
post here your mixer_paths.xml and I'll have a look, I don't think it's the same as on the gt2
Have you tried out other Audio Sources and if that changes anything or is Voice Recognition the best for this device?
@smashda Yes I've tried them all, and voice recognition is the only one with acceptable results. Sources like unprocessed is too low, voice com. has too much noise canceling, etc.
wizard8400 said:
post here your mixer_paths.xml and I'll have a look, I don't think it's the same as on the gt2
Click to expand...
Click to collapse
here you go https://mega.nz/file/8odHXDSB#IhmdD1ntn4fMyeRpMVZnNj-uiSBNUG9kOuseiC8bBjo
@alex61194
*!!! have a backup so you can restore from custom recovery, just in case.
1.make sure you are editing mixer_paths.xml from /vendor/etc
2. modify the file according to the instructions from the screenshots.
3.after saving the file verify/set the permissions to be rw-r-r (like before)
4. reboot the phone, check if the modifications are still there
5. try a recording see if something changed. Do not expect to fix or improve something. This is just a test to see if we are on the right path.
6. tell me the results.
@wizard8400 bruh we have GT 2 Indian variant RMX3312 with an unlocked bootloader. We, unfortunately don't have TWRP. Can you give some suggestions?
@Ptathavi I think is possible with magisk:
first you need to flash a patched boot image (patched by magisk) to have root
and then something like: https://forum.xda-developers.com/t/how-to-change-files-in-the-directory-system-with-magisk.4454489/
or try searching something like "edit system file with magisk"
wizard8400 said:
@Ptathavi I think is possible with magisk:
first you need to flash a patched boot image (patched by magisk) to have root
and then something like: https://forum.xda-developers.com/t/how-to-change-files-in-the-directory-system-with-magisk.4454489/
or try searching something like "edit system file with magisk"
Click to expand...
Click to collapse
Thank you bro, much appreciated. I'll try. Since I've root there's posibility
Ptathavi said:
Thank you bro, much appreciated. I'll try. Since I've root there's posibility
Click to expand...
Click to collapse
How did you root it? Did you flash the patched boot img from magisk?
Prinve said:
How did you root it? Did you flash the patched boot img from magisk?
Click to expand...
Click to collapse
Join our group for help
Mod. edit: social media link removed. alecxs
What!!! I have been searching for this for so long but i couldn't find it, searches only showed Neo 2 and Pro and as there were no posts in XDA i thought development hasn't started yet so i was learning/trying to build twrp and build device tree for it. Thanks for the link