Related
The Next Best Stock Rom From Galaxy Y - Galaxy Pocket
Welcome to My AF-Firey ROM This is Stock Based ROM Post your review, suggestions on this version of AF by going to Original Thread and We will do it As We Can ..
Click to expand...
Click to collapse
Features :
*.Deodex
*.Rooted
*.ICS Look
*.Tap Sleep on UI
*.AF Style Tab
*.Transparent Launcher
*.Lidroid Toggle
*.Swipe to Remove Notification
*.Tabbed Settings
*.AF Style FmRadio
*.Transparent Gallery3D
*.Black Style KeyBoard
*.JellyBean Phone Style
*.Modded Internet to Browse Fast
*.ICS ClockWidget
*.ICS Dialer
*.AF Style at Memo
*.AF Style at MyFiles
*.AF Style Task Switcher
*.Transparent System
*.RainBox Style Lock screen
*.Disable Signature Verification
*.Centre Title
*.Opera Mini as default Browser[Updated]
*.QuickPic Gallery[Updated]
*.Explore it Yourself
Click to expand...
Click to collapse
Installation :
1.Boot to Android System Recovery mode by pressing volume up key home button power key
2.Flash Cwm update.zip and boot into Cwm recovery
3.Select Mounts and storage - In that format system , format data , format cache and come back and wipe data/factory reset and Wipe Cache And in advance mode - wipe dalvik cache and battery for not getting bootloops .
4.In cwm Recovery, then select mounts and storage. Mount /system, /data, cache.
5.Select install zip from sd card.
6.Select choose zip from sd card.
7.Select AF-Firey CORi.zip
8.After Complete "Mount system" and Select Reboot , If system is mounted no need to Mount system Again okay
9.First Boot can be Take 3 - 4 min .So be patient till it boots
Click to expand...
Click to collapse
SCREENSHOTS : Go Here
http://forum.xda-developers.com/album.php?albumid=11205
Click to expand...
Click to collapse
DOWNLOADS :
ROM Link : http://www.mediafire.com/?bg9hz37zmddue6g
SuperSu By ChainFire Flash this using cwm after the Rom Boots to Home Launcher okay ..
http://www.mediafire.com/?u813nzkqu08s1dd
Click to expand...
Click to collapse
Credits :
Android Fire
Galkill
Me
ImBj
God
CarlDeanCatabay
PineappleOWL
Occuot
SpaceCacker
b16h22
thebooter
myaservip
HyperionDevs
LenoxDevs
If Forget PM me
BUGS :
-On first Boot Phone.apk May FC but no problem after setting the AccessPoints of your network ,everything will be okay And before flashing this rom backup everything and mainly "Access Point" ..
-No supersu App when rom boots .You need to root the rom by flashing supersu update file given above ..
-And setupwizard FC may also occur cz of no network when Rom Boots .. Dont just blame me please All are minor bugs ..
-And other bugs you guys encounter are of original rom ,But i think not big major ones ..
Hope yoy guys like this one too Thanks ..
ORIGINAL THREAD :
http://forum.xda-developers.com/galaxy-y/development/rom-af-firey-t2821268
For Access Points
Goto
-Settings/Mobile networks/Access point/Restore to default Apn's ..
okay you will get your sim Access Points .. Tada
You will get connected to internet when you select anyone Access point as your default one
Forgot to say Kernel preincluded in the rom and you dont need to flash any other kernel ..
Kernel Thread : http://forum.xda-developers.com/showthread.php?t=2456538
Credits To : Nachiket.Namjoshi
And Sorry if missed anyone ..please tell i will add you
Kernel Added in the Rom .. itself
Forgot to say Kernel preincluded in the rom and you dont need to flash any other kernel ..
Kernel Thread : http://forum.xda-developers.com/showthread.php?t=2456538
Credits To : Nachiket.Namjoshi
And Sorry if missed anyone ..please tell i will add you
Good keep that up dude i open sourced most of my work
Github/myaservip
Now iam back to xda
Sent from my Nexus 5 using XDA Premium 4 mobile app
Hello guys, just sharing my first porting work to u all
Please read this post from first to the end of this post
"Please respect to my work,
I'm doing this fix all alone by
giving up my rest time, quota (since i didnt have wifi), etc..
so dont complain if u find any bugs, or
a lil bit hassle to install it.
if u find any, just report it to me
if it's possible to fix,
i will try to make a patch / troubleshoot updates."
Click to expand...
Click to collapse
NOTE : DO THIS AT YOUR OWN RISK
Changelogs :
ROM :
#> BETA 2 - 20151213
- Fixed META-INF problem, can flash using any recovery now except stock
- Fixed Completely selinux problem
- Fixed Camera and screen issues on other A1 devices (ex Mito Impact a10)
- Fixed Flashlight
- Fixed Bootloop at first time install (dont need to wipe dalvik again)
- Fixed Offline charging
- New kernel and ramdisk
- some other patches and minor fix
#> BETA 1 - 20151211
- Fixed RIL (only single sim for now)
- Fixed Launcher icons
- Fixed Dialer and Contacts FC
- Fixed Change wallpaper FC
- Fixed some layout
- Fixed MTP
- Fixed Themes FC
- some minor fix and patches
#> DevBuild 1 (Tester Only)
- Initial Release
- All Devices standard features working except (for now) :
RIL (SIM Network/Data Cellular)
- Some of apps fc
Click to expand...
Click to collapse
PATCH :
#> Patch for BETA 2 - 20151220
Fix LED notification
New sqlite_jni [test] : tell if u got any huge sqlite problem in the {logcat} than before patch
Fix weather app
#> Patch for BETA 1 - 20151211
Patched services.jar to disable apps verify
DownloadProvider fix
Click to expand...
Click to collapse
Bugs :
- DUALSIM
- Launcher 4x5 layout bug (use another launcher if u want)
- Google play services sometimes fc. Due to unexpected sqlite problem sometime
- Media stopped working after 5-10 seconds gplay services fc so cant take screenshot and gallery become empty, and in some cases taking screenshot while opening screenshot folder using miuigallery (u need to reboot the phone or wait approx 10-30min)
- Font changing in theme app only works for miui's default browser
- tell me other
Click to expand...
Click to collapse
Download links :
ROMs :
MIUI6_20151213_BETA 2
MIUI6_20151211_BETA 1
GApps :
GApps_miui6_optimized_edition
Patchs :
BETA 2 :
miui6_patch_beta2_20151220
BETA 1 :
miui6_patch_20151211
BOOTLOOP PATCH : miui6_patch_after_flash
BOOTLOOP PATCH : miui6_patch_after_boot
Installation Procedure :
1. Go to recovery
2. Wipe data, cache, system
3. Flash the rom
4. Flash miui gapps
5. Flash the patch (if any)
6. Reboot.
If u are updating from BETA 1 to BETA 2, i recommend to do a wipe data or clean flash to avoid some unexpected issues
BETA 1 Notes :
For you who gettings bootloop at last time, try this :
1. Download these two bootloop patch
2. Rewipe your phone (data,cache,system)
3. Flash the rom, then flash gapps, after that reboot to recovery mode
4. Flash the miui6_patch_after_flash
5. Reboot. Wait till its booting to homescreen (approx 6-10mins)
6. After finishing the setupwizard, go back to recovery
7. Flash the miui6_patch_after_boot
8. Reboot. And ur done
After booting and finishing the setup wizard (and done flashing the bootloop patch if u got bootloop), set selinux to permissive, set using kernel adiutor (go to plugins, download selinux plugin, set to permissive), enable apply on boot
After booting to homescreen u can reput your 2nd card now. but remember its will still didnt detect your 2nd card
Troubleshoot :
1. How to enable root access?
- Open security app, choose permissions, root access .. there u go (make sure ur root apps already asked for root first to show it on there)
2. How to disable warn when want to install app?
- Open Privacy, choose device administration, change in unknown sources from ask to allow
3. How to make my phone mtp detected?
- Unplug ur usb, open miui default file explorer, select phone, wait till its complete loading, then connect ur usb
4. Google apps or keyboard is force closing how to fix?
- Use my miui6_gapps
5. Titaniumbackup is restarting after grant root access, how to fix?
- Update your current tb to version 7.2.1.2 or latest
6. Cant install apps from PS, says no free storage, how to fix?
- Flash the download provider fix
7. Cant install apps from my sdcard, says no free storage, then after i try it its says install failed
- Set your phone selinux to permissive, then use root ex delete the package folder in data/data .. ex Im failed to install bbm, delete the com.bbm folder
8. Cant import theme from sdcard, what to do?
- The new MIUI at default doesnt allow you to apply theme which not from their store, but try other theme, theres some of theme still can be imported
9. Issues with downloading, how to fix?
- Turn off the xunlei download engine at download - settings, also set the limit to unlimited
10. Navbar is too small, how to fix?
- If u want alternative, use MiPop 2.0 .. im reduced its size due to fix some of layout bugs. To remove the navbar add "qemu.hw.mainkeys=1" without " in the bottom of the build.prop then push Mipop.apk to system/priv-app
11. How to show messenger chat heads?
- Download app-ops app from playstore, install then reboot, after that search for messenger permission, enable the draw over blabla permission : thanks to Kishan Kumar for the guide
How to Install Video Review, thanks to Sounak Pal :
Here
To appreciate my hard works, you can consider giving me some donations by :
Giving some steam wallets : nteztaz
or if u at Indonesian country, u can send me some credit balance to buy quota,
msg me for my call number
Credits :
[email protected] for the rom base
Yusuf Maulana for the idea of porting from 'based cm11'
Sounak Pal for the video review
All my Tester
All Android One users
Me (TezTaz Si Rama)
A huge thanks for this Rom was waiting for different ui.
It would be great if u will provide some screen shots
Screenshots
I havent found any fc
Hoping that the sim bug will be fixed soon
I dont mind using the Single SIM as I use it for single sim most of the time. Thank you for sharing it here. I'm downloading it now.
an awesome rom
This is the best rom I have ever used on my Sparkle V. Very smooth ,
but I found a bug - while backing up data on local storage the phone hangs and reboots itself in a minute, but that's not a major issue.:good:
guys, I tried flashing, but failed. ,
- first I tried wipe everything, and then flash. But flash or rom failed, giving sole softlink issue. I tried multiple times, but failed. Finally, fixed issue by having another 4.4.4 rom installed first and then flashing this rom without wiping system
- once flash was successful, I rebooted device, but it keeps looping wihout booting up. OP suggested multiple iterations of (battery remove, goto recovery, wipe dalvik, boot) , but I am in my 7th attempt and device not booting still.
How many times you guys had to wipe dalvik? Very much anxious to test this MIUI rom !
Flash why philz
Do not flash gapps it was bootlooping
yadavdharmendar said:
Flash why philz
Do not flash gapps it was bootlooping
Click to expand...
Click to collapse
thanks @yadavdharmendar, I am installing from philz, and I avoided installing gaps as well. Still not luck. I get Simlink error.
I am coming from FIUI rom. Not sure if that matters (as anyway I am wiping everything before starting rom flashing).
I was on Fiui too
Then i flash cm11 ,then miui
yadavdharmendar said:
I was on Fiui too
Then i flash cm11 ,then miui
Click to expand...
Click to collapse
thanks! But why you installed CM11 first before installing Miui. OP didn't asked for it. Just curious to know!
And where you got CM11 from? From Cyanogenmod download page for "sprout"?
mobilepgk said:
guys, I tried flashing, but failed. ,
- first I tried wipe everything, and then flash. But flash or rom failed, giving sole softlink issue. I tried multiple times, but failed. Finally, fixed issue by having another 4.4.4 rom installed first and then flashing this rom without wiping system
- once flash was successful, I rebooted device, but it keeps looping wihout booting up. OP suggested multiple iterations of (battery remove, goto recovery, wipe dalvik, boot) , but I am in my 7th attempt and device not booting still.
How many times you guys had to wipe dalvik? Very much anxious to test this MIUI rom !
Click to expand...
Click to collapse
Its not davlick issue it's just meta inf folder bug
Just open ROM zip and delete meta inf folder and replace it from any downloaded sprout ROM zip just copy meta inf folder frm there and paste it in miui ROM n u r done just do a clean install n w8 for 5 mins
teztaz--v3 said:
Hello guys, just sharing my porting work to u all
"Please respect to my work,
I'm doing this fix all alone,
so dont complain if u find any bugs,
if u find any, just report it to me
if it's possible to fix,
i will make a patch updates."
Changelogs :
Bugs :
Download links :
ROMs :
Here
MIUI GAPPS :
soon
Patchs for Download Provider :
Here
Installation Procedure :
1. Remove your 2nd sim card, then go to philz recovery or LATEST (2.8.7.x) TWRP recovery (darkplay)
2. Wipe data, cache, system (or just use the 'clean to install rom' function)
3. Flash the rom
4. Flash miui gapps
5. Flash patch
6. Reboot, wait till 6 mins, pull your phone battery, then goto recovery and wipe dalvik cache, then reboot*
7. After booting and finishing the setup wizard, set selinux to permissive, set using kernel adiutor, enable apply on boot
*do it again until the progress bar bottom of the screen showing
Troubleshoot :
1. How to enable root access?
- Open security app, choose permissions, root access .. there u go (make sure ur root apps already asked for root first to show it on there)
2. How to disable warn when want to install app?
- Open Privacy, choose device administration, change in unknown sources from ask to allow
3. How to make my phone mtp detected?
- Unplug ur usb, open miui default file explorer, select phone, wait till its complete loading, then connect ur usb
4. Google apps or keyboard is force closing how to fix?
- Change your gapps, use pico/nano gapps for now
5. Titaniumbackup is restarting after grant root access, how to fix?
- Update your current tb to version 7.2.1.2 or latest
6. Cant install apps from PS, says no free storage, how to fix?
- Flash the download provider fix
7. Cant install apps from my sdcard, says no free storage
- Wipe data your phone, reflash again, after boot set selinux to permissive
Credits :
[email protected] for the rom base
Yusuf Maulana for the idea of porting from 'based cm11'
All my Tester
All Android One users
Me (TezTaz Si Rama)
Click to expand...
Click to collapse
not downloading rgt now....will instead wait for another a bit stable build...a salute to your work...hope ur working on fixes...already pressed thanx button...keep going boy...
Thanks all. Installed cm11, then installed ROM with the patch, and avoided flashing any gapps. It worked! Just one bootloop, which went away after wiping dalvik.
Thanked OP!!
BTW, any ways to make the navigation buttons look big. And possibly increase bar height?
about 2nd sim
bro plz plz get 2nd sim working.
thanks for your work and you are awesome.
@teztaz--v3
how to make navigation bar transparent ?
and a big thanks for your beautiful awesome work
no FCs seen so far!! Looks perfectly usable as daily rom.
Just one problem seen :
Can not install Google maps. Says insufficient space, which is strange. Also failed to install Link2SD. Tried even installing from ADB, gave error INSTALL_FAILED_UID_CHANGED. Hope Miui is not blocking it.
Every thing is fine bro its super rom but I can't move apps to SD card
Thanks bro! gr8 work! bt can u make e single zip with all fixes? people will get confused with so many patches
nsytechno96 said:
bro plz plz get 2nd sim working.
thanks for your work and you are awesome.
Click to expand...
Click to collapse
B'coz this ROM is based on CM11, it's impossible to get multi sim working
DO READ ALL CAREFULLY ! I MEAN ..... ALL…
When installing this zip you have to know it’ll make your intSD to be formatted when you want to revert to Nougat (see later on) . So do follow instructions carefully, otherwise do flash something else….don’t want to see some tears due to this one
So, thought I upload my twrp zip of A2017 V3.0.0B01 MiFavor 5.2 based on @wineds backup (thnx mate !). And make a FULL GUIDE for it !
As some of you wanted to test out this V3.0.0B01(version2) not through EDL but via a regular twrp zip, here you go !
Pros and Cons but did my best to make it as it is...
PRO :
*stock rom with Dolby
*almost fully debloated of Chinese adware
*working magisk 15.3 and safetynet
*working adaway
*magisk modules working fine
*no call bugs
*no hickups or stuttering UI
*scaling up to 0.25 – much faster UI experience
*axon7 G bootanimation
*FP scanner less then 1/2sec response time
*…
CONS :
*didn’t manage to make system r/w through root explorers ; you can however delete and add files - or use twrp - i guess you’ll have to live with that and test for yourselves
*reboot time lasts langer then normal
*quick-charging does work but does not display that on screen
*dialer phone call list may show some chinese characters next to "mobile", "work". It's a translation of it.
*…
Procedure : READ CAREFULLY !!!!!
0. Download/place files onto extSD (not intSD) formatted as Fat(32)/exFAT (otherwise your extSD might seem “corrupt” when booted – see also PNW) :
a. Twrp3.2.1.5
b. A2017X_V3.0.0B01_O_SL!M rom
c. A2017X_V3.0.0B01_bootstack twrp3.2.1.6 incl
d. Modem G or U
e. A2017X_universalB15_twrp3.2.1.0 included and/or your bootstack of your running rom at the moment
f. Magisk 15.3
1. Do make a full backup of your intSD ! ( on pc or extSD like you want ). You’ll loose your intSD when reverting back and needs formatting to EXT4. YOU ARE WARNED!
2. Install twrp3.2.1.0 (if not already running) !
3. Do make a full backup in twrp3.2.1.0 of your entire working rom (boot, modem, system, data)(if not already done)
4. Boot into twrp3.2.1.0 and flash twrp3.2.1.5(a), reboot in recovery AGAIN ( do not boot system)
5. Wipe system/data/cache/dalvik
6. Install (b) rom
7. Install (c) bootstack
8. Install (d) modem (G/U)
9. Flash magisk 15.3 (f)
10. Wipe cache/dalvik
11. Reboot
12. Tap power on “5sec” and “30sec” screen ( I know….the corrupt boot is awfull,,don't blame me...)
13. You’ll be powered off/red lights
14. Power for around 10sec and you’ll boot
15. Tap middle circle on bootpage, choose English, setup wifi,check in,…..
16. You’re on !
17. Uncheck auto update into Playstore !
18. Check safetynet magisk. Should be ok
19. Check adaway. Should be ok. If not : check “systemless hostst” under magisk/settings
20. Enjoy adless youtube
21. ….
You can add the new JoJoc module in magisk to juice up your battery-life :good:
Tip : disable left page (Mi-board) with long press on home screen/goto more/uncheck Mi-Board
REVERT PROCEDURE to Nougat : READ CAREFULLY !!!
1. Boot into twrp3.2.1.6
2. Flash twrp3.2.1.0 and reboot into recovery AGAIN (not into system !)
3. You will see you have to “cancel” and swype and you’ll have to format intSD again. But first look also if you see your old twrp backup you took earlier into the restore option
4. When so, go into wipe/advanced/wipe/choose data/change filesystem to EXT4
5. Then go into wipe : wipe system/data/cache/dalvik
6. Restore your old twrp backup
7. Flash universal B15 ! (for nougat)
8. Reboot
9. Red lights...but power again for some secs
10. You’ll boot
11. When booted, reenter twrp again and flash ( if needed ) your own bootstack again ( in my case on G I flashed the B09 bootstack (slim4) and in same flash also the B09-removeBLwarning )
12. Reboot and you’re on your old running rom now
INFO :
Stripped off :
Weather
Browser (ume)
Email
Google Video, Films…
Maps
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
….......
Baked into :
AdAway
Google Calender
Google Clock
Youtube Black themed addfree (latest)
...
Minor Modifications :
Zip aligned apk’s
Build.prop tweaks :
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@Didgeridoohan
@asderdd (edl rom + modems :good
@wineds (for his TWRP backup :good
@NFound (for his new twrp's :good
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : OREO 8.0.0
Source : ZTE stock-rom A2017V3.0.0B01 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=889964283620773067 thnx @asderdd
Kernel : stock
Version Information :
Status : Stable
Created : 2018-02-18
Uploaded : 2018-02-20
1. Add A2017X-LockNow feature : https://androidfilehost.com/?fid=818070582850494172
Oh man oh man official Oreo Staying on AEX for now, but great work man Could things like Google Dialer be integrated?
FunkyRasta said:
Oh man oh man official Oreo Staying on AEX for now, but great work man Could things like Google Dialer be integrated?
Click to expand...
Click to collapse
Thank You !
I could but in this release i didn't add to much. Can add a flashable zip though later on. We'll see :cyclops:
Thanks for your efforts.
Did you try open account on chrome?
WesTD said:
Thanks for your efforts.
Did you try open account on chrome?
Click to expand...
Click to collapse
Have installed chrome (use another one) and logged into my google account.
Asking why ?
raystef66 said:
Have installed chrome (use another one) and logged into my google account.
Asking why ?
Click to expand...
Click to collapse
It was broken on MF5.x. I'll download and try soon your ROM.
Can I keep twrp 3.2.1-0 or do I have to update to 3.2.1-5?
BaamAlex said:
Can I keep twrp 3.2.1-0 or do I have to update to 3.2.1-5?
Click to expand...
Click to collapse
It's all in procedure you know. And no you'll have to install 3.2.1.5. Later on, when bootstack is flashed you'll end up even on 3.2.1.6 to not corrupt your data EXT4 partition.
Anyway, read carefully and do all as described!!! This is not a regular flash
Is this the official oreo rom by zte? How is the performance compared to nougat?
ahalak said:
Is this the official oreo rom by zte? How is the performance compared to nougat?
Click to expand...
Click to collapse
Based on this. ZTE release beta V3.0.0B01 MiFavor 5..2
Performance is up to you to test. For me it has no lags only the ones mentioned in OP. When listening f.e. on youtube, imo sound quality is way above N.
Battery with Jojoc tweak is comparable to N.
Also less then 1/2sec for FP scanner. So no bug there as before.
Test it yourself and compare :good:
Why this version and not B07?
Did not boot on my U version. Waiting on animation for 15 minutes
Booted for me (A2017G).
Fingerprint sensor is veeeery slow when phone has been sleeping.
For adaway, I had to change the setting in Magisk, as mentioned in the OP.
Other than that, it seems ok. It would be nice to have a way of applying the B07 OTA though.
Thanks again raystef66!!!
WesTD said:
Did not boot on my U version. Waiting on animation for 15 minutes
Click to expand...
Click to collapse
Not tested on U but it shouls boot ok. i cannot judge from here. Let's see.
Did you see the red light blink?
Have you flshed 3.2.1.5 before you flshed my rom and so on.. ?
What happens when keep holding power ?
If no go , wipe system/data/cache/dalvik again and redo procedure all over.
Edit : if all fails : flash this
joaste said:
Booted for me (A2017G).
Fingerprint sensor is veeeery slow when phone has been sleeping.
For adaway, I had to change the setting in Magisk, as mentioned in the OP.
Other than that, it seems ok. It would be nice to have a way of applying the B07 OTA though.
Thanks again raystef66!!!
Click to expand...
Click to collapse
Thnx joaste!
FP for me is like said very fast even when doing it's nap
Yeah, V3B07 would be great (i worked on it before) but then again for now no dolby when rooted and vice versa afaik. Therefore i worked on this one.
For G version (not sure about U) , if you want to disable nav_bar, use my navbar df!nr
raystef66 said:
Not tested on U but it shouls boot ok. i cannot judge from here. Let's see.
Did you see the red light blink?
Have you flshed 3.2.1.5 before you flshed my rom and so on.. ?
What happens when keep holding power ?
If no go , wipe system/data/cache/dalvik again and redo procedure all over.
Edit : if all fails : flash this
Click to expand...
Click to collapse
i have done what you say on OP. Phone turn off of i dont press power button. When i press, linux pinguin seems and it goes boot animation but never boots.
WesTD said:
i have done what you say on OP. Phone turn off of i dont press power button. When i press, linux pinguin seems and it goes boot animation but never boots.
Click to expand...
Click to collapse
Did you see the A7 bootanimation ?
Did you try the patch that i wrote in previous post ?
Edit : anyone on U version installed succesfully ?
i'm stuck at the linux penguin on my G model, done everything as described in the op, no errors while flashing or anything, can't get past it
ColorOs7 SGSI For OP7P(without repartition)
.............................
Only For Tester
This Original SGSI system.img is over 5GB cannot install on OP7P without repartition
Original SGSI is here - https://www.oneplusbbs.com/thread-5416145-1.html
I am not a developer and i am noob
So, Noob thinking bypass over size limit
(All Features and All Errors are The Same Oringnal Rom)
------------------------------
Require-
-wsxz twrp(only work on this twrp)
-SGSI Falshable zip
-Patch-1
-Patch-2
-Patch-3
-Magisk
download from this link - http://www.mediafire.com/folder/6g0zdul6mwgfy/realmeui_coloros7_for_op7p
Howto-
1- flash WSXZ Twrp zip (and goto reboot - reboot recovery)
2- flash SGSI zip (don't reboot)
3- goto mount (remount data,system,vendor) Flash Patch-1 zip (don't reboot)
3- goto mount (remount data,system,vendor) Flash Patch-2 zip (don't reboot)
4- goto mount (remount data,system,vendor) Flash Patch-3 zip (don't reboot)
5- reflash WSXZ Twrp zip (don't reboot)
6- flash Magisk zip (Reboot system)
Sorry For My English
*Note - if factory reset always require flash Patch-1 & Patch-2
thanks for sharing and your work , if its possible please make a full review video .
and how gonna we could revert back to oos
esi2121 said:
thanks for sharing and your work , if its possible please make a full review video .
Click to expand...
Click to collapse
Original Rom is not stable (heat issue, camera error(maybe third-party app), fingerprint error)
i am only bypass 3GB system limit on 5GB rom installation no need resize system partitions
sorry i cannot full review because my English is very bad
yes, you can back to oos
TxanMoe said:
Original Rom is not stable (heat issue, camera error(maybe third-party app), fingerprint error)
i am only bypass 3GB system limit on 5GB rom installation no need resize system partitions
sorry i cannot full review because my English is very bad
yes, you can back to oos
Click to expand...
Click to collapse
so we can ,install normal twrp and flash oos revert back to oos.
its good to see this rom on op7 pro,
its not need good english bro , it's need time and paitent , not need talk ,just checkout important item of rom and fluidity of ,and some other stuff ,camera ,fingerprint ,...
again thanks for your work
Thanks OP. IDK if it's because I have Verizon but I wasn't able to call or text.
Rom feels great. It brings back memories of my OnePlus one running Color OS natively.
Can't wait for this to run like MIUI rom
Hello XDA community! I was building unofficial ROMs for Redmi 6A. I'm posting my collection of ROMs for Redmi 6A that I've been building. All ROMs have been tested and time tested.
Code:
Warning!
ROMs data only works on vendor MIUI from 10.4.4.0 to 11.0.8.0 Android 9.0 based.
On version 11.0.9.0 there will be problems.
It is recommended to roll back to the versions I described above
VoLTE not working!
I recommend using TWRP Recovery Official or PBRP Recovery Official.
BlissRom has a bug with silent ringtones!
Installation method
1) Install TWRP https://megafon929.github.io/twrp-autoinstaller
2) Reboot to TWRP
3) Wipe > Format Data > " yes " > Click on the check mark > Back
4) Wipe > Advanced Wipe > select: Dalvik / ART Cache, System, Data, Internal Storage, Cache > Swipe to Wipe > Back
5) Install > Select the ROM file (If you need GAPPS and Magisk, it is recommended to click the "Add ZIPs" button and select the necessary archives) > Swipe to confirm Flash
6) Wipe > Format Data > " yes " > Click on the check mark > Back
7) Restart smartphone
The smartphone will reboot, and the download can last from 2 to 10 minutes. Wait!
That's it! The smartphone is ready to work
Click to expand...
Click to collapse
Works
Wi-Fi
Bluetooth
Cameras
USSD
SMS
Calls
Compas
LED Indicator
LTE
Not works
VoLTE
Click to expand...
Click to collapse
Link ROMs: https://m929.ru/_pages/certus_my_builds.html
GAPPS: OpenGapps ARM > Android 9.0 > pico
Source code:
Common device tree: https://github.com/xiaomi-mt6765/android_device_xiaomi_mt6765-common
Device tree: https://github.com/xiaomi-mt6765/android_device_xiaomi_cactus
Kernel: https://github.com/xiaomi-mt6765/android_kernel_xiaomi_mt6765
Contributors
JarlPenguin, SamarV-121, wulan17
recommend some gapps version for lineage and arrowos
vibi_144 said:
recommend some gapps version for lineage and arrowos
Click to expand...
Click to collapse
opengapps.org
android 9 > arm > pico
I'm currently using Nusantara Project LTS. Does the installation works if I'm from A10?
Will this device ever support Project Treble? Android 11 would be nice
voLTE not working
This was written in my post. But I duplicated it
xomikron said:
Will this device ever support Project Treble? Android 11 would be nice
Click to expand...
Click to collapse
Supports VNDK-Lite A64-AB. Also Non-GSI ROMs. View on https://t.me/r6r6a_nongsi
MEGAFON929 said:
Supports VNDK-Lite A64-AB. Also Non-GSI ROMs. View on https://t.me/r6r6a_nongsi
Click to expand...
Click to collapse
Thanks!
currently using the PE+. Hate the launcher due to its lack of customization (can't even change the grid lol, don't want to use custom launcher bcz it will mess up the gesture navigation) but love the smoothness of it on my 6A. Is there any ROM on your work that has similar smoothness to PE+? Tried Arrow OS, but it stuttering abit :/
I currently flashed aicp_14_9.0_cactus_SI_by_MegaFon929.zip
TWRP: twrp-3.5.2_9-0-cactus.img
No gapps - no root
I have to say that this rom is (so far) excellent!
Great battery life
snappy UI
WiFi OK and stable
Mobile data 4G OK and stable
Location OK
Bluetooth OK
Camera OK
everything works (no bugs as far as i tested it).
My device is Redmi 6A (cactus).
I was in MIUI 11.0.8.0
Follower ALL the instructions, everything went smooth.
Before, this device was very laggy and very hard to use for daily tasks.
Now, this device is like a brand new phone!
Thank You MEGAFON929! Great ROM!
Hello and thanks for the ROMs. I followed the instructions very carefully and tried both lineage_16.0_9.0_cactus_SI_by_MegaFon929.zip and
aicp_14_9.0_cactus_SI_by_MegaFon929.zip
TWRP: twrp-3.5.2_9-0-cactus.img
With the first zip I always boot to FASTBOOT and with the second I get a bootloop.
Do you have any suggestions? Can I see some debugging output somehow?
@manolismi
I followed the instructions "letter-by-letter" and had no issues at all.
1) Install TWRP
2) Reboot to TWRP
3) Wipe > Format Data > " yes " > Click on the check mark > Back
4) Wipe > Advanced Wipe > select: Dalvik / ART Cache, System, Data, Internal Storage, Cache > Swipe to Wipe > Back
5) Install > Select the ROM file (If you need GAPPS and Magisk, it is recommended to click the "Add ZIPs" button and select the necessary archives) > Swipe to confirm Flash
6) Wipe > Format Data > " yes " > Click on the check mark > Back
7) Restart smartphone
Try to not add gapps or magisk at first flash (i did not).
I don't use gapps at all, and i flashed magisk after some reboots, and all is fine.
The last 48 hours i'm in "lineage_16.0_9.0_cactus_SI_by_MegaFon929.zip", and i must say this:
This rom is even better than GZ and AICP that i've tried in the past few days.
Good luck!
@Logcates Yes I followed the same instructions carefully. And I only flashed the lineage_16.0_9.0_cactus_SI_by_MegaFon929.zip, without gapps or magisk. The only things we might have done differently are
which TWRP did you install? I got the latest from the instructions link.
Did you verify the zip before flashing? I was getting a validation error so i had to disable checking
I also wiped the internal storage and then copied the zip to it from my computer (and then installed it)
Do you see any problems in those steps above?
@manolismi
I flashed: twrp-3.5.2_9-0-cactus.img (same as you i believe)
I had no warnings or errors during flash.
Maybe your downloads are somehow corrupt?
I always use opera for downloading anything, because chrome gives me corrupted files very frequently.
Another thing is that i was in MIUI 11.0.8.0
Maybe you were in a different MIUI version?
I first flashed AICP (had it for ~2 days),
then GZOSP (had it for a few hours),
then Lineage (i think i will stay in lineage, as call recording is a feature that i like).
I don't know what else could be causing those problems for you.
I hope for the best.
Thank you so much for your work to make this possible! I'm amazed. I finally unlocked and flashed lineageos16 on the 6a of my girlfriend. She's super happy and everything is running perfect! Nice to give this device some new life! Thanks again!
Installed LineageOS 16 on this 3 year old Redmi 6A.
Just wanna say these cROMs saved my old phone from laggy stock UI. Thanks mate!
Just noted that when I flashed LOS from MIUI 11.0.9 Global it the camera doesn't work (Error : Can't connect to the Camera). Note to anyone who try this on 11.0.9, downgrade to 11.0.8 first. (unless there's update in future from the respected dev).
Only when downgrading to MIUI 11.0.8 Global the camera works. I tried reflash 11.0.9 two times before end up flash from MIUI 11.0.8.
Moral : pay attention to the requirements to flash this cROM. In fact, any cROM. read manual in detail.
I Install Pixel Experience plus in my Redmi 6A but i have a issue when i want charge by usb to PC show me "charging slowly" i try install module to magisk but dosent work to me maybe isnt version to the device.
Any ideas?
can't seem to install TWRP via the instruction.
redmi 6a unlock bootloader not rooted
MIUI Global 11.0.8 Stable
Android 9 PPR1.180610.011
update**
i had no luck with fastboot flashing TWRP so i tried PBRP and i was able to install it
then
wipe / fomat card
reboot to bootloader
And flash twrp-3.5.2_9-0-cactus.img and followed the instructions here...now i got Lineage 16 working.
thanks devs for the cROMs and guides!
i have folowed the whole instruction and tried three roms till now at first i flashed lingeage os 17.1 ,but due to camera not working and was restarting now and then automatically i tried arrow os and got stuck in bootloop ,again after this i downloaded and flashed new rom pixel expirence and again i m encountering the same issue with bootloop stuck ........ please suggest the solution