Related
ALL CORES WORKING FULLY WORKING 3 g935 KERNELS TO CHOOSE FROM LOOK BELOW
THAT THIS IS FULLY WORKING AND UPDATED TO NETHUNTER 3.1.0
ZIP MODDED FOR S7 EDGE FOR 1440X2560 WITH NEWEST BUSYBOX AND SUPERSU
WARNING: This is completely untested, highly theoretical, and possibly dangerous. Flash at your own risk.
Back up your original boot image in TWRP before attempting to flash this! If it doesn't boot, you can simply restore your previous boot image.
This is Kali NetHunter 3.1.0 for the Galaxy S7 Edge.
If you don't know what Kali NetHunter is, well, it's the entire Kali Linux operating system in a chroot on your phone, plus a bunch of awesome apps for executing exploits, fixing things, doing cool things. It goes on, I suppose.
I'm gonna be honest guys, I'm not a security person. When it comes to security, I'm more of a Paul Blart.
What I do know though, is that there is apt-get, and apt-get is life.
Find much more information here: https://github.com/offensive-securit...nethunter/wiki
The answer to all your questions, generally the answer is YES, IT CAN DO THAT.
Most ROMs should be supported, as our installer uses a dynamic patching method on your current boot image!
The updater zip will add a few files to your /system partition, and install all of the NetHunter apps to your /data partition.
The chroot is located in /data/local, so you don't have to worry about your system partition being full. It's full read/write capable.
Understand that the zip will replace your current kernel with a completely different one.
This is necessary because most stock or custom kernels don't provide the drivers needed to operate most of Kali NetHunter's features.
DOWNLOAD
https://mega.nz/#!3QIHzQ5b!x77Wad9OUAyQqAtJJucak3C_3twfFFwZqJ77Wt1j6-c
Current version: 3.1.0 (beta, 07/03/2016)
Please be careful to download the right version based on this table:
SM-G935F, SM-G935FD, SM-G935X, SM-G935W8: hero2lte
SM-G930F, SM-G930FD, SM-G930X, SM-G930W8: See proper forum.
All others be sad.
Download is available at: kernel below
Grab the 700 MB+ zip.
Kernel-only zip is for upgrading your kernel, or just using the NetHunter kernel by itself. (yes, you can do that!)
BEFORE INSTALLING
Currently, Samsung encryption is not supported by TWRP, so we have to disable it.
Sorry security freaks! There's a lot of irony here, isn't there?
The Kali chroot and apps are installed on your data partition (in /data/local for chroot). To initialize the chroot and install Kali Linux, you need to start the Kali NetHunter app.
The NetHunter installer will automatically install SuperSU (2.76) in system mode, which I consider to be more stable. Since NetHunter already modifies your system partition, there is no need to use systemless SuperSU anyways.
Also included is an extra Busybox that gives you full large file support and some extra applets.
FULL FRESH INSTALL STEPS
Install Team Win Recovery Project to your recovery partition.
If your data partition doesn't mount in TWRP:
Go to [Wipe] -> [Format Data] (not advanced wipe) -> type "yes".
WARNING: This will wipe your internal storage, disable encryption, and factory reset your phone!
Once your data partition is formatted, go to [Reboot] -> [Recovery].
Download dm-verity and force encryption disabler.
Without exiting TWRP, transfer no-verity-opt-encrypt.zip to your device over MTP* and flash it using [Install] in TWRP.
If you wiped your data partition in step 2:
Go to [Reboot] -> [System].
Set up your phone by following the Android setup wizard.
Once it's set up, reboot back into recovery.
Download Kali NetHunter.
Without exiting TWRP, transfer the NetHunter installer zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
Wait 5-15 minutes for your device to finish setting itself up.
Open the NetHunter app to initialize the environment
You're done!
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
UPDATING TO A NEWER BUILD
Going from 3.0.0 and up, all you have to do is flash the new build in recovery and wipe dalvik cache.
UPDATING YOUR ROM
To get all your NetHunter and SuperSU functions back after flashing a new ROM, just flash the ~700+ MB update-nethunter-* zip again.
THE KERNEL
The NetHunter kernel for the Galaxy S7 Edge is based on Samsung's OSRC G935FXXU1APF2 kernel sources.
It has the following changes:
F2FS updated to Jaeguek Kim's latest kernel.org f2fs-stable sources
F2FS formatted system, data, and cache partition support
UKSM Ultra Kernel Same-page Merging KSM support
Updated and enabled USB (OTG) Atheros, Ralink, and Realtek WiFi drivers
Simple IO (SIO) scheduler as default IO scheduler
USB HID Gadget keyboard support
mac80211 packet injection support
DriveDroid compatibility
Additional drivers built in for the full Kali NetHunter experience
Data partition encryption changed from forced to optional (disabled during installation)
Disables dm-verity and allows you to boot modified system partitions
RAN INTO AN ISSUE OR BUG?
In order for me to help you, you have to at minimum reply with:
The link to the exact zip you downloaded
Your device model (it better not be something other than G935F, dangit!)
The name of the ROM you're flashing it on
The version and build date of the ROM you're flashing it on
A complete description of your problem
Optional: An audio recording of you reading this entire post
If your issue is with a specific app, it might be better to contact the developer of that app.
If your issue is during the installation (ex. flashing the NetHunter zip), then please collect a TWRP recovery.log for me.
If you found a problem and were able to fix it, and no one's mentioned it in the thread already, it would be kind to state the issue and your fix for others to make use of as well.
You can join me and the other NetHunter developers on IRC at the #nethunter room on freenode to more handily diagnose problems together.
I apologize, but I can't do house calls at this time.
KNOWN ISSUES
USB Keyboard - The keyboard is unusable when using Google Keyboard as your input method. Switch to Hacker's Keyboard.
NetHunter Terminal - It doesn't automatically set the columns/rows, so you need to type "resize" sometimes to fix the display.
DEVELOPMENT
You can see branch of the installer development here:
Alternatively, the main branch is also available on the Offensive Security GitHub: https://github.com/offensive-security/kali-nethunter
Kernel source: https://github.com/BoostFlash/nethunter_kernel_herolte
DISCLAIMER
I am not affiliated with Offensive Security. They seem like cool guys though.
I'm not even a novice when it comes to security and penetration. I'm just a simple system administrator with a passion for breaking Android.
Please restrain yourselves from asking me security related questions.
XDAevDB Information
Kali NetHunter for the Galaxy S7 Edge, Kernel for the Samsung Galaxy S7 Edge
Contributors
jcadduono, The Kali NetHunter team ,ohap
Source Code: https://github.com/BoostFlash/SuperKernel
https://github.com/BoostFlash/nethunter_kernel_herolte
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 3.1.0
Beta Release Date: 2016-07-03
new links :
jcadduono nethunter patcher with new superkernel plus nethunter patches , make sure your on a kernel thats fully working before flashing this as it only patches ramdisk
https://mega.nz/#!LR4BgbyJ!vezMFaob3mIETH__mVMd9WjCXwLCFvzouObX7f72wmY
my kernel compiles from superkernels source with makeshift ramdisk + nethunter patches
https://mega.nz/#!rEQDBD4B!v_4JRruBe6exR-O40ax5DECJA7nLikSpbIbEDI7YVyM
superskernel with his modded ramdisk plus nethunterpatches added by me synapse support <--best one
https://mega.nz/#!qcYnBAoT!KSHvaX7EtJLDeQq0kPmZHK4N200cnyirHP4X7-jUavg
Kali nethunter
https://telegram.me/kalinethunter
must thanks and credit to:
lucu/Tkkg1994 superkernel dev
jesse for fp patch
jcadduono for his help with github and patcher scripts
webhost420/hayden for brainstorming with me
So I'm good to just flash this with TWRP over the current one I'm using?
CPU core 6 and 7 still stopped as with previously used kernel.
Kali still working, everything seems the same so far. Will see with time.
umKthxbye said:
So I'm good to just flash this with TWRP over the current one I'm using?
CPU core 6 and 7 still stopped as with previously used kernel.
Kali still working, everything seems the same so far. Will see with time.
Click to expand...
Click to collapse
ya i cant seem to get them to work as i dont know , this is compiled from a old source , me and a other are trying to fix it no , BUT this is way faster then ael kernel , and im no way a professional kernel dev so this is my first shot at kernel i compiled my self which was a pain
ohap said:
ya i cant seem to get them to work as i dont know , this is compiled from a old source , me and a other are trying to fix it no , BUT this is way faster then ael kernel , and im no way a professional kernel dev so this is my first shot at kernel i compiled my self which was a pain
Click to expand...
Click to collapse
Are you using that AEL kernel as a base or the stock kernel?
Since the stock kernel or even Jesse kernel have all cpus active maybe use those and add support for the USB wifi adapters.
I'm also working on this with stock kernel but fixing compiling errors.
umKthxbye said:
Are you using that AEL kernel as a base or the stock kernel?
Since the stock kernel or even Jesse kernel have all cpus active maybe use those and add support for the USB wifi adapters.
I'm also working on this with stock kernel but fixing compiling errors.
Click to expand...
Click to collapse
No not using ael anything as there $%&$ , message me on telegram we have a group working on it . My name on there is Boostflash
ohap said:
No not using ael anything as there $%&$ , message me on telegram we have a group working on it . My name on there is Boostflash
Click to expand...
Click to collapse
Just post when there is a new one to test, the current one seems stable other then the 6 core problem.
Fixed the cores being off line they all come online at boot , but now facing maybe CPUFreq driver initialization failed ?? Which causes now all cores to go offline and stay off after a few seconds . And makes kernel unusable
ohap said:
Fixed the cores being off line they all come online at boot , but now facing maybe CPUFreq driver initialization failed ?? Which causes now all cores to go offline and stay off after a few seconds . And makes kernel unusable
Click to expand...
Click to collapse
Did you upload it for testing? Or not reliable enough to bother?
umKthxbye said:
Did you upload it for testing? Or not reliable enough to bother?
Click to expand...
Click to collapse
I thought the unusable kernel term would explain that , its not good for upload if you want to join group on telegram you can test if you want
good news jcadduono back working on this again , he first trying to fix his patcher zip , i told him how i got mine working but its different then what he doing , so once he gets that fix we see if its a issuse with original Samsung source or nethunter patches the core issues
The best way to use terminal in this since Hacker keyboard has so much **** on it you can't type properly.
1. Open Nethunter, Menu, Kali services, add check mark to SSH start at boot, and check it to turn on.
2. Go into Kali terminal(last time you'll need to use this crap) type; passwd "whateveryouwant", this will be used for your user in the next step.
3. Download Juice SSH and add user root with password what ever you made.
4. Create a connection using IP 127.0.0.1 (this is the local loopback address) leave port blank, it will use 22 by default.
5. Connect with one click and enjoy using any keyboard with bonus juice addon keys for terminal use.
JuiceSSH also give you a nifty little extra keyboard ontop of the one you use with the tab function, making bash autofill work.
I use swiftkey keyboard and have been using JuiceSSH for years to access my CentOS 7 servers and its been a dream to work with.
The one packaged with Nethunter is just terrible, and most of the other one found on app store are terrible as well.
Also, Ohap, you don't have to reboot after formatting the /data, just go back and clear the dalvik, cashe, etc, and other stuff like the guide I posted in your other thread.
Feel free to use the one I posted in the last thread.
Great work so far. The last kernel is still going strong, with no random reboot or other problem other the the 2 cores we all know about.
umKthxbye said:
The best way to use terminal in this since Hacker keyboard has so much **** on it you can't type properly.
1. Open Nethunter, Menu, Kali services, add check mark to SSH start at boot, and check it to turn on.
2. Go into Kali terminal(last time you'll need to use this crap) type; passwd "whateveryouwant", this will be used for your user in the next step.
3. Download Juice SSH and add user root with password what ever you made.
4. Create a connection using IP 127.0.0.1 (this is the local loopback address) leave port blank, it will use 22 by default.
5. Connect with one click and enjoy using any keyboard with bonus juice addon keys for terminal use.
JuiceSSH also give you a nifty little extra keyboard ontop of the one you use with the tab function, making bash autofill work.
I use swiftkey keyboard and have been using JuiceSSH for years to access my CentOS 7 servers and its been a dream to work with.
The one packaged with Nethunter is just terrible, and most of the other one found on app store are terrible as well.
Also, Ohap, you don't have to reboot after formatting the /data, just go back and clear the dalvik, cashe, etc, and other stuff like the guide I posted in your other thread.
Feel free to use the one I posted in the last thread.
Great work so far. The last kernel is still going strong, with no random reboot or other problem other the the 2 cores we all know about.
Click to expand...
Click to collapse
This was a poorly edited post for newbies , i know hacker keyboard sucks , and you dont have to wipe ect .. thanks for support & feedback
awsome update coming i have fixed the core issue !!! with the power of superkernel "luca" source ,plus nethunter patches, and a make shift ramdisk !!!! i got it to boot and all cores online plus all the goodys of superkernel !!
Now Need to just include patch for hid keyboards now I do that latter
umKthxbye said:
The best way to use terminal in this since Hacker keyboard has so much **** on it you can't type properly.
1. Open Nethunter, Menu, Kali services, add check mark to SSH start at boot, and check it to turn on.
2. Go into Kali terminal(last time you'll need to use this crap) type; passwd "whateveryouwant", this will be used for your user in the next step.
3. Download Juice SSH and add user root with password what ever you made.
4. Create a connection using IP 127.0.0.1 (this is the local loopback address) leave port blank, it will use 22 by default.
5. Connect with one click and enjoy using any keyboard with bonus juice addon keys for terminal use.
JuiceSSH also give you a nifty little extra keyboard ontop of the one you use with the tab function, making bash autofill work.
I use swiftkey keyboard and have been using JuiceSSH for years to access my CentOS 7 servers and its been a dream to work with.
The one packaged with Nethunter is just terrible, and most of the other one found on app store are terrible as well.
Click to expand...
Click to collapse
Hacker's Keyboard is there for use with USB keyboard app and editing configs and stuff in the NetHunter app.
As for terminal in NetHunter...
As you said, I recommend JuiceSSH as well. You can create a Local Terminal profile to get into Android console, then type:
Code:
su -c bootkali_login
You can also purchase JuiceSSH premium features and create a snippet that does all of that for you!
This way, you don't need to use SSH and waste battery!
ohap said:
awsome update coming i have fixed the core issue !!! with the power of superkernel "luca" source ,plus nethunter patches, and a make shift ramdisk !!!! i got it to boot and all cores online plus all the goodys of superkernel !!
Now Need to just include patch for hid keyboards now I do that latter
Click to expand...
Click to collapse
fixed hid
umKthxbye said:
The best way to use terminal in this since Hacker keyboard has so much **** on it you can't type properly.
1. Open Nethunter, Menu, Kali services, add check mark to SSH start at boot, and check it to turn on.
2. Go into Kali terminal(last time you'll need to use this crap) type; passwd "whateveryouwant", this will be used for your user in the next step.
3. Download Juice SSH and add user root with password what ever you made.
4. Create a connection using IP 127.0.0.1 (this is the local loopback address) leave port blank, it will use 22 by default.
5. Connect with one click and enjoy using any keyboard with bonus juice addon keys for terminal use.
JuiceSSH also give you a nifty little extra keyboard ontop of the one you use with the tab function, making bash autofill work.
I use swiftkey keyboard and have been using JuiceSSH for years to access my CentOS 7 servers and its been a dream to work with.
The one packaged with Nethunter is just terrible, and most of the other one found on app store are terrible as well.
Also, Ohap, you don't have to reboot after formatting the /data, just go back and clear the dalvik, cashe, etc, and other stuff like the guide I posted in your other thread.
Feel free to use the one I posted in the last thread.
Great work so far. The last kernel is still going strong, with no random reboot or other problem other the the 2 cores we all know about.
Click to expand...
Click to collapse
New kernel out built from superkernel check it out . Recommend the super ramdisk ver I posted
Yes I saw. I'm using it already. I like seeing the 8 cores back. Time will tell how stable it is. Good work guys.
is it work with superman rom?
please tell me how to flash
mdrobiulhasan said:
is it work with superman rom?
please tell me how to flash
Click to expand...
Click to collapse
How to flash is in first post . It should work with any rom with system root not systemless
Anyone having issues with call forwarding? Since I flashed King rom my call forwarding has been messed up, even going back to stock. Not sure if it's cuz of root, rom, or kernels.
Still running stable btw.
Hi all,
my Huawei P9 is running Android 7.0 (EMUI 5.0.1) rooted.
As "Build" is shown "NRD90M test-keys", but as this doesn't correspond to any of what I have seen as valid build numbers so far, I guess this is wrong and somehow related to the Nandroid backup restore I did after upgrading this phone from Android 6 to 7... Anyway, my question is this:
What's the best option for me now to make this phone mass storage mode compatible?
The USB Mass Storage Enabler app claims that the current kernel does not support Mass Storage Gadget & FUSE and thus the app won't function.
So it seems that I need a new kernel.
- Is there a kernel available that I can use to simply substitute my current kernel?
- Can / should I easily compile my own one? (I have done that 15 years ago with Linux kernels, since then no kernel compilation experience anymore). If so, where do I start?
- Do I have to use a custom ROM? Which one do you recommend for that feature to work and for a lightweight system with high performance, flashable without muhc hassles from my current status?
Thanks a lot!
i think you updated to a beta firmware,
this thread may help,
good luck
Du you mean, a non-beta will contain the necessary kernel options?
daniel908 said:
Du you mean, a non-beta will contain the necessary kernel options?
Click to expand...
Click to collapse
not sure, but some had similar issues with the nougat beta.
[Post deleted] - sorry, didn't find a delete button, so just deleted the content.
On another P9 with Android 7.0 / EMUI 5.0.1 (Build-Nr EVA-L09C432B394) the USB Mass Storage Enabler app also doesn't work for the same reason.
So I think that beta (if it really is one - the Nandroid backup title of the system with build number shown above has the same string in its directory name - maybe when restoring the Nandroid backup, that string is written into the "Build" field?) is NOT the reason for the mode not working.
Anyone here who uses that app and has USB storage mode support on a (rooted) stock Android 7.0 / EMUI 5.0.1 on a P9?
The app says (Google Play) that it works only on "selected" Samsung and Sony devices (btw, it"s rated only 3.5)
I just tried (Magic zRainbow v3 which is based on v394 and rooted Magisk), it says it doesn't find the lun file and not compatible with the kernel. IMO, it can't work here (I don"t know would it work with AOSP firmwares instead of stock).
Btw if you really restored TWRP backup from MM (EMUI 4.1) to N (EMUI 5), you are lucky that you didn't (soft) brick the phone
The app worked very well on my older P9... so it's not really limited to "selected Samsung and Sony devices".
I didn't get a notice about missing LUN file, but kernel incompatibility message was shown here, too. However, as far as I know the kernel can be replaced easily by flashing a new kernel? Question is then only, how to get my hands on a compatible kernel. Compile my own one? I have never done this with Android.
Or is there any other method to enable mass storage mode for the microSD card, so I can sync my stuff easily with the Mac on a daily schedule without having to remove the card from the phone everytime?
I tried other (e.g. MTP-based) sync solutions, but they all fail badly (either crash or take ages) when keeping those about 2.000.000 small JPEG files in sync that I need on the phone's microSD card. Those files are virtual tours / gigapixel image tiles, that I host on the phone to be able to present those virtual tours to clients without carrying a computer with me).
This is an unofficial build of LineageOS 16.0 for the Motorola razr I, (XT890/SMI).
Lots of thanks to Hazou. This rom is based on his los-14 rom and I got help from him with los-16.
This rom has full hardware support and should run stable. It has been tested by me in daily use. I'm using the rom without google apps, but with microg. Installing google apps requires some apps to move to data partition because of limited system size. See install description for more info.
Special Features
-All features of Hazous 14.1 rom
-MicroG signature spoofing patch is included.
-Adaptive icons can be disabled in homescreen settings.
I can include more features if requested
Known Bugs
-The camera preview image sometimes shakes at random
Download
https://mega.nz/#F!5fBWlIAQ!Jlq9Bj789iJ0iIIptK00tg
Update
If you already run an earlier version of this rom, just boot to twrp and install the latest flashable zip file
Install
1. Backup everything you don't want to loose.
2. Download and install TWRP 3.2.3 (download in attachments. Can be flashed with fastboot or with another recovery)
3. If you come from another rom do a full wipe with twrp
4. Download and install the rom flashable zip (download from mega.nz link is in section download)
5. If you want to install opengapps or need system partition space for other things. Install the move_to_data.zip file from the attachments. This will move the Webview and the LatinIME app to data partition.
6. Choose one of the following options:
-either install google apps (download form https://opengapps.org/. Choose x86 9.0 nano or pico)
-or install MicroG (can be installed with the unofficial installer https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360) this is lighter in ram and cpu usage but you will get problems with google chrome and other apps
7. If you want root access install the addonsu-16.0-x86.zip (download in the attachments)
8. Reboot the phone. First reboot will take some time
Changelog
Code:
20191018:
fixed problem with sms receiving
20191012:
mobile network connection works now after boot
Fixed problems with network switching
Show taps option is working now
intel art extension enabled
Call recording enabled
text relocation warnings disbaled
(untested) encryption. Needs special configuration (see below)
20190819:
SELinux is now enforcing
Notification access feature enabled
solved crashes with houdini emulated apps
20190713:
usb configuration works properly
battery light works now
July security patches
20190704:
first stable release of this rom
DATA Encryption
If you want to enable data encryption this would break the pds partition backup. To prevent this, the cache partition can be used as backup location:
-edit /system/bin/pdsbackup.sh
-change PDS_FILE=/data/misc/pds/pdsdata.img to PDS_FILE=/cache/misc/pds/pdsdata.img
-resize data partition in TWRP:
Code:
umount /data
umount /sdcard
e2fsck -f /dev/block/mmcblk0p17
resize2fs /dev/block/mmcblk0p17 1367079
-reboot the phone
XDA:DevDB Information
unonfficial LineageOS 16.0, ROM for the Motorola RAZR i
Contributors
julianwi, Hazou
Source Code: https://github.com/julianwi/android_device_motorola_smi/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-08-19
Created 2019-07-04
Last Updated 2019-08-19
This if I did not expect it, I'll try to see how it goes. Thank you.
Download links and install description are up now. Download from mega.nz because xda download section is broken at the moment. I'm waiting for your test reports
It's really great works, thank you!!
I quickly tried and found several points.
- USB connection with PC
All USB connection option including File Transfer, USB tethering, PTP are grayed out.
Disabling/Enabling android debug in setting didn't work.
- Wifi with storage encryption
When you enable storage encryption, WiFi always become disabled, not be able to enable.
Just FYI, it required deleting /system/bin/pdsbackup.sh AND reducing partition size of 'data' (/dev/block/mmcblk0p17).
- SElinux
Although it is designated as permissive in device.mk, it's actually worked as "disabled".
I'm not sure it's related or not, however, when building "user build", it's failed with "ERROR: permissive domains not allowed in user builds".
I know "user build" is not officially supported in Lineage release, however, it's really helpful if we can do it for AFW usage.
Previously I could use Lineage 14.1 smi build for AFW and safetynet app with user build.
BTW, performance is really great, seems to be almost same as Lineage 11.
dumkm said:
It's really great works, thank you!!
I quickly tried and found several points.
- USB connection with PC
All USB connection option including File Transfer, USB tethering, PTP are grayed out.
Disabling/Enabling android debug in setting didn't work.
Click to expand...
Click to collapse
I also noticed that. Will see how this can be fixed. It is just a problem with the option dialog. Usb connection works fine. As a workaround you can set a default USB configuration in developer options
dumkm said:
- Wifi with storage encryption
When you enable storage encryption, WiFi always become disabled, not be able to enable.
Just FYI, it required deleting /system/bin/pdsbackup.sh AND reducing partition size of 'data' (/dev/block/mmcblk0p17).
Click to expand...
Click to collapse
I have not tested storage encryption yet. Will have a look at it later
dumkm said:
- SElinux
Although it is designated as permissive in device.mk, it's actually worked as "disabled".
I'm not sure it's related or not, however, when building "user build", it's failed with "ERROR: permissive domains not allowed in user builds".
I know "user build" is not officially supported in Lineage release, however, it's really helpful if we can do it for AFW usage.
Previously I could use Lineage 14.1 smi build for AFW and safetynet app with user build.
Click to expand...
Click to collapse
I think lineage trust doesn't differentiate between permissive and disabled. Selinux support is planned for future releases
Thank you for quick check.
Regarding USB connection, I also confirmed that Ubuntu can recognize as external storage with above option, besides Windows still does not recognize. Maybe depending on my environment.
Also I noticed that Chrome, Chrome Beta and Chrome Canary (therefore another Chrome based apps such as Maps Go) always crash. This is also maybe my environment only, though. BTW, I could install MicroG, besides couldn't install OpenGapps 9.0 pico due to partition size limit.
Additionally, I couldn't find any LED settings, currently LED is always off during charge or any notification.
dumkm said:
Thank you for quick check.
Regarding USB connection, I also confirmed that Ubuntu can recognize as external storage with above option, besides Windows still does not recognize. Maybe depending on my environment.
Also I noticed that Chrome, Chrome Beta and Chrome Canary (therefore another Chrome based apps such as Maps Go) always crash. This is also maybe my environment only, though. BTW, I could install MicroG, besides couldn't install OpenGapps 9.0 pico due to partition size limit.
Additionally, I couldn't find any LED settings, currently LED is always off during charge or any notification.
Click to expand...
Click to collapse
Notification Led should work. Can be configured under settings->apps and notifications->notifications->notification light. I don't know what happened with the battery light. It will hopefully come back if I upgrade the driver to hidl.
Google Chrome is a known problem with MicroG. It requires official gapps. I will check if some of the unprivileged lineage apps can be moved to data partition to make place for google apps
Newbie question
Hi all, I know someone who's selling her old RAZR i XT890 and I'm interested (for experimental reasons but also the oddity that it's Intel powered). I've never owned a RAZR i so I've got some questions:
-The phone is from 2012 so quite old and has 1GB RAM, does it work well with this Lineage 16? Because usually newer software would perform bad on older SoC (I used to have iOS 7 on iPhone 4 back in the day and it was painfully slow compared to 6).
-On Lineage 16, can it run any Android app as a standard new Android Pie phone? I ask because this is an Intel x86 CPU, so can it still run Android apps as normal or are most of them only designed for ARM and therefore unusable?
If I get the good news, I may buy the phone and try this Lineage OS custom ROM.
Regarding LED, maybe it became working after modifying some option of notification light. Battery connection light is still always off.
Regarding opengapps, I moved webview and LatinIME from app directory to external SD in TWRP, then installed as normal app after system boot. Webview worked fine besides LatinIME always crash. I'm using different IME, so it's no problem. With this environment, opengapps nano can be installed, then Chrome, Maps and other google apps worked.
dumkm said:
Regarding LED, maybe it became working after modifying some option of notification light. Battery connection light is still always off.
Regarding opengapps, I moved webview and LatinIME from app directory to external SD in TWRP, then installed as normal app after system boot. Webview worked fine besides LatinIME always crash. I'm using different IME, so it's no problem. With this environment, opengapps nano can be installed, then Chrome, Maps and other google apps worked.
Click to expand...
Click to collapse
That's good. Than we can make a flashable zip to automatically move and symlink them to data partition.
I will provide a new build till end of the week with improved usb and notification LED implementation. I already got it working in my local setup
flameseewa said:
Hi all, I know someone who's selling her old RAZR i XT890 and I'm interested (for experimental reasons but also the oddity that it's Intel powered). I've never owned a RAZR i so I've got some questions:
-The phone is from 2012 so quite old and has 1GB RAM, does it work well with this Lineage 16? Because usually newer software would perform bad on older SoC (I used to have iOS 7 on iPhone 4 back in the day and it was painfully slow compared to 6).
-On Lineage 16, can it run any Android app as a standard new Android Pie phone? I ask because this is an Intel x86 CPU, so can it still run Android apps as normal or are most of them only designed for ARM and therefore unusable?
If I get the good news, I may buy the phone and try this Lineage OS custom ROM.
Click to expand...
Click to collapse
Newer android versions have been designed while keeping low ram devices in mind. Ram hungry special features like the picture in picture mode are excluded from builds for older device. So the situation is much better then on iOS. But a newer phone would run better thought.
Most android apps are available for x86. But some are still arm only and get automatically emulated. The intel houdini emulator integrates these apps natively into the system but they are a bit slower then x86 apps. These are for example Skype and a few unity based games
julianwi said:
Newer android versions have been designed while keeping low ram devices in mind. Ram hungry special features like the picture in picture mode are excluded from builds for older device. So the situation is much better then on iOS. But a newer phone would run better thought.
Most android apps are available for x86. But some are still arm only and get automatically emulated. The intel houdini emulator integrates these apps natively into the system but they are a bit slower then x86 apps. These are for example Skype and a few unity based games
Click to expand...
Click to collapse
Thanks for the response. So I should be alright with it then, hopefully. I just hope it won't lag on that old SoC. I'd love if you could upload a quick video of it in action.
TWRP error 70
julianwi said:
This is an unofficial build of LineageOS 16.0 for the Motorola razr I, (XT890/SMI).
Lots of thanks to Hazou. This rom is based on his los-14 rom and I got help from him with los-16.
This rom has full hardware support and should run stable. It has been tested by me in daily use. I'm using the rom without google apps, but with microg. I don't know how smooth it runs with official gapps.
Special Features
-All features of Hazous 14.1 rom
-MicroG signature spoofing patch is included.
-Adaptive icons can be disabled in homescreen settings.
I can include more features if requested
Known Bugs
-Mobile cell connection doesn't connect after boot. You have to turn airplane mode on and off to let it work.
-selinux is set to permissive for now (reduced security)
Please report more bugs if you test this rom
Install
1. Backup everything you don't want to loose.
2. Download and install TWRP 3.2.3 (download in attachments. Can be flashed with fastboot or with another recovery)
3. If you come from another rom do a full wipe with twrp
4. Download and install the rom flashable zip (download from mega.nz https://mega.nz/#!ICwXRC6D!VZqe3o5zeWbmMiZvka_BtUTW5T_V7_OdMS57Oe9CbMk)
5. Choose one of the following options:
-either install MicroG (can be installed with the unofficial installer https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360)
-or install google apps (download form https://opengapps.org/. Choose x86 9.0 pico)
6. If you want root access install the addonsu-16.0-x86.zip (download in the attachments)
7. Reboot the phone. First reboot will take some time
XDA:DevDB Information
unonfficial LineageOS 16.0, ROM for the Motorola RAZR i
Contributors
julianwi, Hazou
Source Code: https://github.com/julianwi/android_device_motorola_smi/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-07-04
Created 2019-07-04
Last Updated 2019-07-05
Click to expand...
Click to collapse
I've installed the OS without problems, but when i try to get GApps Pico or any other version TWRP prompt error 70. How should i proceed? There is any additional configuration needed?
Kazvko said:
I've installed the OS without problems, but when i try to get GApps Pico or any other version TWRP prompt error 70. How should i proceed? There is any additional configuration needed?
Click to expand...
Click to collapse
Yes, system partition size is limited on this phone. To install GApps some files need to be moved to data partition.
I created a flashable zip to automate this process. Take a look at the modified install description in the first post
New build is up now.
flameseewa said:
Thanks for the response. So I should be alright with it then, hopefully. I just hope it won't lag on that old SoC. I'd love if you could upload a quick video of it in action.
Click to expand...
Click to collapse
Sorry don't have enough time to make a video in the near future. Maybe someone else can record a video of it
I could confirm that notification LED and USB storage works fine with lineage-16.0-20190713-UNOFFICIAL-smi. Thanks.
Still WiFi with storage encryption does not work.
julianwi said:
New build is up now.
Sorry don't have enough time to make a video in the near future. Maybe someone else can record a video of it
Click to expand...
Click to collapse
Alright, thanks. I bought my friend's RAZR i and I am planning to use it as a daily driver with this ROM (I'm a light user anyway), I can't thank you enough for making this LineageOS for such an old device. I wonder if such a recent Lineage has been developed for the 2011 Atrix, haven't seen one.
I have questions though, firstly I've never used a custom ROM before, can I simply follow the instructions on this thread to get it working, or is there anything that has to be done beforehand like rooting? Secondly, are any other OSs successfully booting on this x86 phone, as I can't find it on XDA? (it surprisingly hasn't gotten much attention as a hackable device like HTC HD2 or Nokia N900 got).
dumkm said:
I could confirm that notification LED and USB storage works fine with lineage-16.0-20190713-UNOFFICIAL-smi. Thanks.
Still WiFi with storage encryption does not work.
Click to expand...
Click to collapse
I know, haven't looked at the storage encryption for now. It will maybe be in the next update next month
flameseewa said:
Alright, thanks. I bought my friend's RAZR i and I am planning to use it as a daily driver with this ROM (I'm a light user anyway), I can't thank you enough for making this LineageOS for such an old device. I wonder if such a recent Lineage has been developed for the 2011 Atrix, haven't seen one.
I have questions though, firstly I've never used a custom ROM before, can I simply follow the instructions on this thread to get it working, or is there anything that has to be done beforehand like rooting? Secondly, are any other OSs successfully booting on this x86 phone, as I can't find it on XDA? (it surprisingly hasn't gotten much attention as a hackable device like HTC HD2 or Nokia N900 got).
Click to expand...
Click to collapse
If the phone never had a custom rom yet, you have to unlock the bootloader first. Description is in this thread: https://forum.xda-developers.com/showthread.php?t=1928551
julianwi said:
If the phone never had a custom rom yet, you have to unlock the bootloader first. Description is in this thread: https://forum.xda-developers.com/showthread.php?t=1928551
Click to expand...
Click to collapse
That's an old guide, will everything still work?
flameseewa said:
That's an old guide, will everything still work?
Click to expand...
Click to collapse
Yes, it should still work the same. If some links are outdated you can google them yourself
Thank you for bringing my old RAZR i back to life! I really appreciate the time and effort you spent for this obselete phone. Looking forward for more updates and for a bug free ROM. Using it now
dumkm said:
- Wifi with storage encryption
When you enable storage encryption, WiFi always become disabled, not be able to enable.
Just FYI, it required deleting /system/bin/pdsbackup.sh AND reducing partition size of 'data' (/dev/block/mmcblk0p17).
Click to expand...
Click to collapse
I'm not sure if I misunderstood but when you said "it required deleting....." and "reducing partition size of data", did you mean you can get WiFi to work if you do those things? I'm no expert at these but I can atleast apply the "fix" (if it really is) given that you guide me, if it's okay with you. Thanks!
First of all, thanks to ilia3367 for his Pure Edition ROM which contains some very useful stuffs for flashing and booting GSI.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in the GSI
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What you need
1. Unlocked bootloader
Follow this guide to unlock bootloader. In overall, the unlock process is not as difficult compared to other brands, provided your device is eligible to unlock.
WARNING: The following steps assume you have already unlocked your bootloader. If you haven't unlocked your bootloader yet, or your device isn't eligible, DO NOT PROCEED.
2. fastboot
The process utilizes fastboot exclusively, so make sure you have fastboot installed.
3. A Magisk patched boot.img.
You can either patch it yourself using Magisk Manager, or use boot_magisk.img from Pure Edition ROM.
Although you should be able to use GSI without Magisk, you'll probably need to patch vbmeta (or vbmeta_system) so the stock kernel won't refuse to boot the GSI in this case. This guide does not cover non-Magisk scenario for now, as I'm not entirely sure. With Magisk, patching vbmeta is not needed.
4. A backup of factory images in case something goes wrong.
The factory image (both S and 20 Pro) can be found in the Pure Edition ROM thread as well.
Steps to flash GSI
1. Enter fastboot
Hold down both POWER and VOL- to enter fastboot mode.
Or you can use the following adb command to do so.
Code:
adb reboot bootloader
2. Enter fastbootd
Enter the following command to enter fastbootd, where you can actually access the system partitions, as this phone uses Dynamic Paritions.
Code:
fastboot reboot fastboot
WARNING: The following steps will actually modify your system partitions and may leave your phone unbootable. Make sure you have backed up everything before proceeding.
3. Flash Magisk patched boot.img
Assume you have the Magisk patched boot.img as boot_magisk.img, enter the following command.
Code:
fastboot flash boot boot_magisk.img
Note that you can also flash boot.img directly from fastboot, before entering fastbootd.
4. Remove the product partition
The phone's system partition is very small (about 1GB), but has a very big product partition (about 2.7GB). You'll get an error if you try to flash the GSI right away, as the super partition does not have enough room to resize the system partition to hold the GSI image if it's too large.
As the product partition is not useful for GSIs, it can be safely removed. Enter the following commands.
Code:
fastboot erase product
fastboot resize-logical-partition product_a 0x0
This will erase the stuffs in the product partition and set its size to zero, so the system partition would be able to claim its space when resizing.
You can always use the following command to check bootloader variables.
Code:
fastboot getvar all
In this case, check if the product_a partition has indeed been resized to zero. If yes, you can proceed.
Code:
(bootloader) partition-size:product_a:0x0
5. Flashing the GSI
Enter the following commands.
Code:
fastboot erase system
fastboot flash system gsi.img
Note that the erase command is optional. Replace gsi.img with the actual GSI image file of your choice.
6. Wipe userdata if needed
You don't need to wipe userdata if you are dirty flashing newer build of a same GSI over the existing one.
In case you need to do so (such as flashing a different GSI, or factory reset), enter the following commands.
WARNING: These commands will erase everything in the internal storage, not just app data! Make sure you have everything in the internal storage backed up before doing this. You may try this unofficial TWRP for this device if you want to perform factory reset while keeping your files, as well as creating a nandroid backup.
Code:
fastboot erase userdata
fastboot erase metadata
7. Reboot
Enter the following command to reboot.
Code:
fastboot reboot
If nothing goes wrong and the GSI doesn't have any major issue that might prevent it from successfully booting, you should be able to boot the GSI and further configure it yourself.
I'm still experimenting with GSI so I'm not sure which feature works and which doesn't.
The GSI I'm currently testing is DotOS. Different GSIs may produce different results but should be mostly similar.
For now it seems the following stuffs are working fine:
- Wi-Fi
- Bluetooth (Audio is problematic, other parts appear to work fine)
- 5G (Data)
- NFC
- Camera
- Display color settings (such as Boosted, Saturated)
- Fingerprint Sensor (Turned out it works!)
- Encryption (GSI can work with untouched vendor, which enforces encryption)
- 120/144 fps (On GSI it defaults to 120 fps, which can be changed in Phh-Treble settings)
The following stuffs are problematic:
- MTP (I recommend using ADB as it's a hit-or-miss on Linux. On some environments it works, on other environments it doesn't)
- Bluetooth Audio (Need to enable "alternate audio policy" and also "Force disable A2DP offload" for headsets to work correctly)
The following stuffs are not working:
- VoLTE (While you can enable "Force the password of 4G Calling setting" in Phh Treble Settings -> IMS features" then toggle it off then on upon system startup to make it active, it does not work correctly!)
Here are some functionalities that I won't be able to test as I'm not actually using them.
- SafetyNet related (I use microG now)
- USB Type-C Audio (I mainly use bluetooth headsets if needed for all except gaming)
- SIM2 (I'm confident it'll work as both SIM slot's IMEIs are correctly detected)
- Carrier-specific issues (Need someone using Verizon or other GSI-problematic carriers to test this)
Currently I've tested that the most recent DotOS, OctaviOS GSIs are working.
Keep in mind that not all GSIs can boot. You'll need to look for another build if the one you flashed doesn't boot correctly (which seems to be SELinux related).
For now, most of the functionalities work on GSI using a Magisk patched stock kernel and untouched vendor. The kernel source for RRA31 build (Global) is currently in the process of being released.
UPDATE (11/3/2021): The source code is now available.
but i've still have a question for the step 5
this mobile is a/b slot but you didn't use fastbootd mode is that work?
ZhenYuSAMA said:
but i've still have a question for the step 5
this mobile is a/b slot but you didn't use fastbootd mode is that work?
Click to expand...
Click to collapse
Step 2 is switching to fastbootd. The rest of the commands are done in fastbootd mode.
fastbootd uses the same syntax as fastboot.
This phone uses dynamic partitions, but is also A/B. Usually you would be on slot A if it's a new phone, but be sure to pay attention to active slot if the phone has taken OTA updates before.
I don't know if there are already OTA updates out, though this phone is still relatively new.
LSS4181 said:
Step 2 is switching to fastbootd. The rest of the commands are done in fastbootd mode.
fastbootd uses the same syntax as fastboot.
This phone uses dynamic partitions, but is also A/B. Usually you would be on slot A if it's a new phone, but be sure to pay attention to active slot if the phone has taken OTA updates before.
I don't know if there are already OTA updates out, though this phone is still relatively new.
Click to expand...
Click to collapse
whoa, now i see much thx
I tried DotOS 5.2 since i don't have volte on my area, and it was usable, only thing that annoyed me a little is CPU being capped at 2500MHz. Do you know how to have the same frecuency config as with the stock ROM?. With stock i noticed everytime i open a benchmark app the CPU stays at max frecuency on all cores even if it's not running the actual benchmark.
I don't have much knowledge with tweaking system code since the phone i had before had every ROM in every flavor already optimized (k20 pro) and with this one i'm getting a little bit bored to be honest so i wanted to do something myself but i couldn't get around those frecuency issues. Tried with Franco Kernel Manager and EX, the frecuecies applied but after around 1 minute everything went back to default.
Also, did you try the stock camera app?
Thanks.
rodrimax10 said:
I tried DotOS 5.2 since i don't have volte on my area, and it was usable, only thing that annoyed me a little is CPU being capped at 2500MHz. Do you know how to have the same frecuency config as with the stock ROM?. With stock i noticed everytime i open a benchmark app the CPU stays at max frecuency on all cores even if it's not running the actual benchmark.
I don't have much knowledge with tweaking system code since the phone i had before had every ROM in every flavor already optimized (k20 pro) and with this one i'm getting a little bit bored to be honest so i wanted to do something myself but i couldn't get around those frecuency issues. Tried with Franco Kernel Manager and EX, the frecuecies applied but after around 1 minute everything went back to default.
Also, did you try the stock camera app?
Thanks.
Click to expand...
Click to collapse
VoLTE doesn't work with GSIs yet. I tried forcing the toggle out. It does register, but calls do not function at all (hangs). I've reported the issue to phh, but I'm yet to make any progress. One thing I know is that IMS is in `/system_ext`, and that is not used by GSI.
As for CPU cap, I haven't really tried using kernel managers on the device yet (I prefer using SmartPack). My experience with SmartPack on other devices is similar, that any changes to frequencies would be reverted to default after a while.
It seems the system (or maybe just stock kernel) nowadays don't allow you to freely change CPU/GPU frequencies anymore, and your experience with Franco and EX further proved it. As for benchmark apps capping CPU frequency... I suspect the phone has some cheating mechanisms similar to some other ones in the past.
Don't know about stock camera app. For custom ROMs/GSIs my favorite is Open Camera, which is installed via NanoDroid to replace the stock ones.
Plus, with stock ROM, the system partition doesn't really have many stuffs. Other stuffs were placed in `/system_ext` and `/product`, and it appears that GSIs use neither of those. It's possible that the libraries of some essential features reside in `/system_ext` and therefore would not be available for GSIs (like IMS).
This procedure could be used to A12?
vinaaa said:
This procedure could be used to A12?
Click to expand...
Click to collapse
Yes but from my experience apart from the bugs mencioned above, in A12 fingerprint and magisk don't work and bluetooth doesn't either even with the workaround. Once i found these bugs i went back to stock so i didn't test it more than 15 minutes, it probably has a lot more to be found
LSS4181 said:
VoLTE doesn't work with GSIs yet. I tried forcing the toggle out. It does register, but calls do not function at all (hangs). I've reported the issue to phh, but I'm yet to make any progress. One thing I know is that IMS is in `/system_ext`, and that is not used by GSI.
As for CPU cap, I haven't really tried using kernel managers on the device yet (I prefer using SmartPack). My experience with SmartPack on other devices is similar, that any changes to frequencies would be reverted to default after a while.
It seems the system (or maybe just stock kernel) nowadays don't allow you to freely change CPU/GPU frequencies anymore, and your experience with Franco and EX further proved it. As for benchmark apps capping CPU frequency... I suspect the phone has some cheating mechanisms similar to some other ones in the past.
Don't know about stock camera app. For custom ROMs/GSIs my favorite is Open Camera, which is installed via NanoDroid to replace the stock ones.
Plus, with stock ROM, the system partition doesn't really have many stuffs. Other stuffs were placed in `/system_ext` and `/product`, and it appears that GSIs use neither of those. It's possible that the libraries of some essential features reside in `/system_ext` and therefore would not be available for GSIs (like IMS).
Click to expand...
Click to collapse
Thank you for the reply
I don't know if this is of any relevance but after disabling system tracing on developer options on stock A11, the CPU is not capped when opening benchmark apps anymore
I didn't like the DotOS. Yes, it has an interesting interface, interesting graphical solutions. But many additional settings and functions don't work.
ilia3367 said:
I didn't like the DotOS. Yes, it has an interesting interface, interesting graphical solutions. But many additional settings and functions don't work.
Click to expand...
Click to collapse
GSIs aren't 100% bug-free from my own experiences. Sometimes regressions or plain oversights can happen with certain versions. A long time ago with older devices I even had times when Bluetooth didn't work on a certain GSI because the maintainer forgot to include Bluetooth related libraries (as the logcat errors implied the files were absent).
A recent example would be that custom fonts used to work with an earlier build of OctaviOS (July) but broken with the latest (September). Either the maintainer somehow forgot to actually include the fonts this time, or there were regressions/bugs in the OS itself causing the feature to break.
Plus, it seems substratum is still alive and active, yet I'm quite a n00b when it comes to adding additional features to system with it (preferrably on top of plain AOSP). Back then I mainly used it for custom themes I bought, and when custom ROMs started including built-in theming and the features I need, substratum is pretty much dead to me and I haven't touched it for years since then.
PS: There is an ongoing bug with DotOS for this device, since 5.1, that keyboard layout button would not show up when using 3-button navbar (which is my favorite). The button correctly shows when using gestures or 2-button navbar. I reported the issues several times in the group but I got very limited response (probably because few users are using it thus affected)... so the issue persists with the recently released DotOS 5.2 GSI.
If you are on custom ROM like LineageOS and want to limit battery charge to e.g. 80%, I can show you how it works on the Asus Zenfone 8. [Tested with LineageOS18.1]
What you need is:
Device with root access -> Use Magisk, some hints can be found here.
Then install Battery Charge Limit (BCL). There is also Advanced Charging Controller but I found it to be less reliable, with random crashes and restarts. Just stick to BCL, it is minimalist and stable.
Next, you need to set a custom control file. Go to BCL settings, check to use a custom / configurable control data, then configure the control data with this:
Path: /sys/class/asuslib/charger_limit_en
Enable value: 0
Disable value: 1
(Note that the 0 and 1 is reversed compared to default, that's on purpose!)
If it doesn't work, there might already be a cap in place, you might need to play around with /sys/class/asuslib/charger_limit_cap and set to so something lower. (e.g. with adb shell)
Hope that helps, I didn't find this anywhere on the internet, but searched through the available control files on my phone until I found this one working.
Hi Mario,
I own a Zenfone 8 (ASUS_I006D) and installed LineageOS 19.1 with the build from 27.05.2022.
It is rooted with Magisk and I tried to setup the battery charging limit using the app "Battery Charge Limit".
Unfortunately, it is not working with your guide.
I think, the problem is that on my phone the file you mentioned is missing:
/sys/class/asuslib/charger_limit_en
I checked the directory with Total Commander and there is only one file:
set_virtualthermal
Do you have any idea, what I'm missing here?
Is the carger_limit_en file supposed to be delivered with LOS?
Thanks
This was an unwanted double post.
Nbg1983 said:
Do you have any idea, what I'm missing here?
Is the carger_limit_en file supposed to be delivered with LOS?
Click to expand...
Click to collapse
I tested this while still using LOS18.1. I'm still skeptical about LOS19, still a lot of people report instabilities or crashes.
Might have something to do with the newer LOS version, but also with the firmware. LOS19 has newer firmware for the chipset. This means that config files could have been reworked, moved to a different place. You could look around a bit in sys/class if this file was moved to somewhere.
Could also be a bug in LOS19 that it doesn't parse all the configs correctly.
It looks like that the LOS 19.1 kernel does not provide the necessary files.
I installed the Kernel vom Kirisakura and then the following file exists
/sys/class/asuslib/charger_limit_en
Also, it looks like BCL is working now with your suggested settings.
Unfortunately, the kernel from Kirisakura is not fully compatible with LOS 19.1.
At least, fingerprint reader is not working, anymore. I hope, he'll release a LOS 19.1 compatible custom kernel.
That's indeed interesting, thanks for sharing the info.
The custom kernel replaces boot.img, vendor_boot.img and dtbo.img which they extracted from the stock ROM + optimizations. I doubt that the config files comes from the optimizations, so I guess there is a bug in LOS boot.img, vendor_boot.img or dtbo.img, and it is repaired by patching the stock images here.
Or question: Do you maybe use LineageOS with MicroG? Just asking because in this case, it would explain the issue since MicroG has a bug in the build pipeline so that some firmware images are missing.
I didn't use MicroG.
Its also interesting, that LOS 18.1 seems to have the necessary files for BCL.
I guess, that the files should be included in vendor_boot.img.
Unfortunately, replacing the custom vendor_boot.img with the original one leads to a boot loop.
So I either have to wait and hope for a LOS 19.1 update with included charger files, or I have to downgrade to 18.1?
Perhaps there was an update on this? Where should one submit a ticket for LineageOS? As an issue?