I think this happened at around the time that I installed the latest update. I checked the sensors through the *#0*# menu and found that my gyroscope's value isn't moving and my magnetic sensor is spinning. I calibrated the magnetic sensor using Google Maps and also the Edge screen, but still it happens. I tried playing a racing game which relies on my gyroscope to steer and to my surprise, it works fine. I also tried to test my magnetic senor by downloading a compass app, and it properly displays my current bearing. I'm also not entirely sure but my accelerometer data aren't properly telling that it's on a flat surface although it actually is.
Is anyone also having this issue?
I did just remember that when I downloaded the update, I had an intermittent connection, would a part of the update be corrupted so that the drivers for the gyro and compass be mismatched?
I also have a youtube video showing what my screen displays when I do a sensor test.
Related
I remember (but not for sure) a settings page that gave you the ability to test different sensors and what-not. the reason for my question is because when i make a call the proximity sensor doesnt work, and i wanna know is it because of the rom or anything software related, or is it the sensor itself, since i recently had repair done on the screen.
thanks.
Nobody knows? i got a 30-day warrenty, so if my proximity sensor really isnt working i need to know soon.
I've used an app previously that would display raw readouts from the various sensors in the device, including the proximity and ambient light sensors. Stand by while I try to find what app that was...
In the meantime, you can at least verify that half of the sensor is working by looking at the screen through a digital camera or other phone's camera. The proximity sensors works off of a flashing IR LED that you should be able to see through a digital imaging sensor. The sensor is located to the left and below the speaker.
Also, I believe the application I was using is called "Elixir", and is free on the Market.
Thanks man, great app. everything is working ok now.
Hey guys. I have looked around and can find no info on some of the tabs sensors. From what i understand the chipset is straight out of the galaxy s phones, which is the reason i see the existence of a proximity sensor but dont see any data from it.
Anyone have a clue whether it actually exists?
chipset and sensors are different things....even if the chipset supports a certain type of sensor doesn't mean it should be there if there is no need to be there.
galaxy tab doesn't need a proxy sensor cause you are not going to put it beside your face when calling...
triplex76 said:
chipset and sensors are different things....even if the chipset supports a certain type of sensor doesn't mean it should be there if there is no need to be there.
galaxy tab doesn't need a proxy sensor cause you are not going to put it beside your face when calling...
Click to expand...
Click to collapse
Doesn't need and doesn't have are different things. Point is, if it was stated that the tab has a proximity sensor, where is it?
I'm pretty sure it has one, in the unofficial CM build Technomancer says he fakes i at 10CM
There is no proximity sensor in Galaxy Tab.
My CM7 sensors driver pretends there is one and reports 10CM distance so the Phone app behaves better.
Thanks mate, that's what you said in the last thread back in October, but why do all the sensor pingers see it? Are they checking code rather than hardware?
Also, is there a working, sensitive light meter anywhere for the tabs ambient light sensor? The couple I've tried refuse to work...
There is working light sensor in the Tab. Both my CM7 and Samsung ROMs support it just fine. It has range from 0 to 6000 Lux snapped to one of several levels in the kernel driver. You can actually read it from sys interface.
The proximity sensor in my CM7 sensors driver is just software reporting constant 10cm to the system. The sensors test apps in my CM7 (I uses Sensor Test and Plot http://www.appbrain.com/app/sensor-test-and-plot/com.golborne.android.SensorTest) just reports 10cm from my fake sensor.
I think there is some leftover code in Samsungs sensors driver that may report presence of proximity sensor.
Yep, i use it as well, but my issue is with the three avaliable states the driver seems to report.
I get 5, 22 and 75. Are there only three levels then? And no way to modify them outside the kernel?
I can get up to 6000lux using strong LED flashlight directly on the sensor.
There is another sys device that can read unprocessed data that has values not snapped to 5,22,75 etc... but Samsung's driver uses the snapped device (and so is mine).
This is very annoying... im trying to make an app that needs a proximity sensor to work as intended so the light sensor as well as the sleep mode implementation are really no substitute.
In any case, im sure it will be quite usefull for all tablet owners running 2.2 and up and using a case. I will have a closed beta for xda members by the end of the day, so people can test it over the weekend.
Would you like a shot, mancer?
I don't know what would you do but if I understand why not to use the g-sensor ... just like in samsung omnia...put backwards enable silent courtesy mode.
the proximity sensor will be useful if you use the leather case to close the screen when touches the screen , like ipad 2 and galaxy tab 10.1 V they have proximity sensors , but i noticed that the sensor exists using sensor applications they see it exists but not giving readings
Hi - there is no sensor, the sensor list showing it is just a glitch from the galaxy s motherboards. And the functionality youre describing is already available in my app Killswitch - you can get both the lite and full version from my signature...
ftgg99 said:
Hi - there is no sensor, the sensor list showing it is just a glitch from the galaxy s motherboards. And the functionality youre describing is already available in my app Killswitch - you can get both the lite and full version from my signature...
Click to expand...
Click to collapse
Thanks I already bought it from market and it's great
Sent from my GT-P1000 using XDA App
Great! Im working on an update that will help improve the accuracy of the light sensor functions... been getting some flack for not updating it
Watch this space!
Hi!
I am facing problems with the orientation sensors (accelerometer and/or gyroscope), because installing several applications to test them (or use games), it is clearly observable, that they are a bit off (with enough to be disturbing when required). For example, games or tests that simulate a ball, and my phone is laying on a horizontal table, the ball rolls quickly to the edge of screen. This happens as well with the built-in tests in the "service menu" of the phone, for accelerometer and gyroscope also.
Do you have any suggestions how could I calibrate these sensors globally (for every app)?
Thanks.
Info
vetko said:
Hi!
I am facing problems with the orientation sensors (accelerometer and/or gyroscope), because installing several applications to test them (or use games), it is clearly observable, that they are a bit off (with enough to be disturbing when required). For example, games or tests that simulate a ball, and my phone is laying on a horizontal table, the ball rolls quickly to the edge of screen. This happens as well with the built-in tests in the "service menu" of the phone, for accelerometer and gyroscope also.
Do you have any suggestions how could I calibrate these sensors globally (for every app)?
Thanks.
Click to expand...
Click to collapse
factory Reset ur phone and then use PC companion app to Repair Firmware...
this can wipe current data and install fresh firmware on ur device
:good:
Hi,
I have the same problem. Only the x axis of the accelerometer seems to be affected : it show a value around 1 instead of 0 while the phone is sitting flat. Y and Z display normal values.
All the software solutions I have tried have had no effect at all... It seems the built-in test reads raw data from the accelerometer. It is hard to imagine how this can be a hardware problem though...
Anyway, in my case I believe a software fix (x=x-1) would do the trick but I have no idea how to do such a thing ! Any help ?
@vekto : Have you solved the issue by any chance ?
Would anyone care to try the accelerometer tests and post their results ?
Typing *#*#7378423#*#* will get you on the service menu. The two significant tests are "accelerometer" and "gyroscope".
I'd post some screenshots myself but I'm not allowed yet...
I'm having the same problem now. It seems one axis is affected. Haven't found a way around so far. This is sad because it affects the images taken with Google Camera Sphere mode. The images are badly aligned together with glitches in between. My phone wasn't like this before.
Either a SW fault - might be able to calibrate with GPS Status & Toolbox app, for example - or a FW fault - and reflashing ROM might help (highly unlikely) - or HW fault - the sensor has moved on the board (which is a bad sign anyway, might be on the way to disconnecting itself).
I sent mine to Xperia Care and got it back with the accelerator fixed. Still unclear if it's a HW problem...
It came back with a white spot on the screen (near the power button) though... so I sent it back again
I'm also having issues with the gyroscope. Installed Bubble app to calibrate the gyro. It showed the gyro was of a couple of degrees. Unfortunately the bubble app calibration doesn't work in a game like Need for Speed. It's very difiicult to achieve good times in the game right now since I have to hold it tilted to the left to go straight ahead.
So if anyone has a fix or workaround... Please do post.
Same problem, Seems after factory reset whith wipe dalvik cache.
any solution?
02nd March 2017, my autorotate has completely stopped working, restart, safe-deposit and reset do not fix. Diagnostics show Gyroscope Light Sensor and accelerometer failed testing, 3 years of same issue, surely there must be a fix that works by now?? ( please note, " turning it off and on again " does not fix it )
Helps Please
I have the same issue. Since last week, gyro, accelerometer, light and proximity sensors stop working. I've tried reflashing stock ROM without success. I have not warranty (almost 3 years old), so I even try to disassemble , disconnect an reconnect every flex (I don't know exactly were the sensors are located on the board). After that I get almost 8 hours of fully functionally sensors and then, they stop working again, so I'm almost sure it's a hardware issue.
Same problem for 3 years
I'm just now getting around to doing something about this. As my power button stopped working I can't post requested screenshot without going to the pc. I have been shopping new (fall 2018) phones after having the Z3+ since release. In my research I'm finding the phone still is better than Samsung, LG, and the pixel3 for me because the 3.5mm phone jack is mandatory for me using my device with an i-rig midi requiring both that port and the USB at the same time. I'm going to do everything I can to keep using this phone till it falls to dust. It's one of 4 Sony I've bought since the day Z1 came out of t-mo. I look forward to testing solutions. :good:
Some time after my post, I bought a new jack/proximity sensor flex and replace it. This solved the issue, but weeks later, the bottom portion of the touch screen becomes unresponsive. May be I have done something wrong... may be programmed obsolescence...
Hi I'm facing a problem of my gyroscope I don't know which one is not working a gyroscope or accelerometer. My gyroscope is so delay when I play pubg mobile and I can't also calibrate my Gsensor it always says FAIL but I put in a perfect flat surface please please please help me with this problems
So, I was using a spirit level app (for the exciting job of making sure a domestic appliance was sat level on its feet ) when I noticed that the rotation sensor seemed not to be working; it barely registered any change in orientation when I rotated the phone through a complete circle.
I did the whole "figure of 8" calibration thing but it made no difference at all.
Here is the intriguing part:
The spirit level function of the app worked perfectly, and a separate compass app worked perfectly BUT with the two functions combined there seems to be some kind of system/software bug that prevents all of the motion and magnetic functions working together at once.
I am presuming the compass uses a magnetic sensor and the spirit level only uses accelerometers for motion detection, but would still read the magnetic sensor for phone rotation?
Is this genuinely an issue or bug or am I barking up the wrong tree?
BTW I am happy to bear this anomaly in mind and use separate apps for compass and spirit level, that really isn't a problem
Stock LG 4.2.1 rooted, bootloader not unlocked
I have Note8. It has a very strange sensors error, as below:
- All sensors, from proximity sensor, light sensor, to GPS, iris scanner, and all the other sensors do not work at all.
- In the app like Phone INFO Samsung, CPU-Z or AIDA64, in the Sensors section, all sensors do not work.
- The Auto Brightness function does not work (due to the light sensor), the brightness of the AOD screen is also not adjustable.
- When making a phone call and move the phone close to the ear, the screen does not turn off due to proximity sensor.
- Auto Rotation function is not working (due to rotation sensor).
- Google Maps shows inaccurate location. Other apps that rely on GPS (such as the speedometer app) are completely not working.
- The iris scanner function does not work either.
It was about two weeks ago. I've Wiped the cache, restart the phone but does not make sense.
Yesterday it suddenly returned to normal, I don't know why.
But today - while I'm typing this post - all sensors suddenly do not work again.
Any idea about the error and how to fix it?
Thank you guys
Best advice I can think of is to factory reset and see if that alleviates the problem.
If you did not do anything firmware-related, or you did not drop or submeged your device, the best you can do is to make a warranty claim, pure and simple, if you have no way to make such claim, well, next time you should consider getting a device from an official source
I've read other users have had same problem. Ones I read said it was motherboard issue had to have sammy replace it.
Thank you guys
There is also built-in sensor test. Open dialer and dial *#0*#
I noticed a problem when I was playing Asphalt (racing game on me Note 8). I am unable to use the Tilt controls to move the scar.
Testing out the Sensors using *#0*# at the dialer revealed that all the SENSORS was faulty.
I reset the whole phone just now. The issue is still there with the sensor. As expected Auto rotation doesn't work.
Running the latest version 8.0.
I recently changed my motherboard (under warranty) 3 months back cos something was faulty. Seems it may be another motherboard issue.
Anyone else in this thread solved the issue?
Hey everyone I'm facing the same problem. All sensors stoped working but they were working before on 7.1.1 and i updated my device to oreo and realized all sensors stoped
Then i got another updated for about 900mb i thought maybe this update will fix them and also that update said tha after updating the user cannot downgrade to nougat but after updating the problem still exsist. Please if anyone can help i also try to flash same oreo firmware with odin but doesn't fixed the sensors