Related
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
your secure level was to high for a non bootloader method and if you done a method with a unlocked bootloader and your bootloader was locked thats bad.
unlock your bootloader >>WARRANTY VOID<< install cwm and use any backup. or flash the 39 gb fw but i think you have yet to unlokc the bootloader to safe it.. and be patient dont try to much stuff if your battery goes low you need a factory adapter or something like this to charge ur razr i if the battery is down.
regards hope you get it waorking again
I solved my problem this way
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise else xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
jacbarahona72 said:
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise cuarquier xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
Click to expand...
Click to collapse
Could PM Me with the instructions in spanish, there are some things that i do not understand in your english
Tried to use your method but RSD lite got stuck on "4/11 erase userdata" and the phone says "program dummy sp block for userdata" I don't thin I understood well the part of the second phone, does it have to be on, i mean normal on, or does it have to be in flashmode aswell?
I tried following this guide to downgrade to 4.2.2 so that I could root my AT&T device.
I was able to adb and fastboot into the device. And I flashed the ATT CU update with fastboot.
After that the device constantly reboots after reaching the M logo screen,
I can boot into the bootloader, and I can send fastboot commands, but not any adb commands.
I also cannot load any of the options in the bootloader (Recovery, Factory, etc), they simply reboot the phone.
I don't care what version of Android I go to as long as it gives me a working phone. Please help!
Thanks.
Edit: I was able to recover my phone by flashing the 4.4 update. I would like to know where I went wrong, so that I could possibly still do the downgrade>root>upgrade path.
UberSprode said:
I tried following this guide to downgrade to 4.2.2 so that I could root my AT&T device.
I was able to adb and fastboot into the device. And I flashed the ATT CU update with fastboot.
After that the device constantly reboots after reaching the M logo screen,
I can boot into the bootloader, and I can send fastboot commands, but not any adb commands.
I also cannot load any of the options in the bootloader (Recovery, Factory, etc), they simply reboot the phone.
I don't care what version of Android I go to as long as it gives me a working phone. Please help!
Thanks.
Edit: I was able to recover my phone by flashing the 4.4 update. I would like to know where I went wrong, so that I could possibly still do the downgrade>root>upgrade path.
Click to expand...
Click to collapse
You know there's a way to unlock your bootloader for $43ish. Many success stories. Your phone playing life would improve greatly.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
I was successful in getting the bootloader installed and also twrp but SU and Magisk kept giving error, somehow in the last boot I am now on a boot loop of bad key cannot boot to OS of phone and the backup of the OS will restore but it still will not boot past the bad key loop. I can get to the twrp recovery and the bootloader but no functions work in bootloader twrp works flwlessly but I have no image for my device. Does anyone have the stock rom for the metro verision of moto e5 plus. I have found one for the Cricket version but specs are all wrong. Any help would be appreciated
edit resolved with
cant post link to resolution
archnemesis2099 said:
I was successful in getting the bootloader installed and also twrp but SU and Magisk kept giving error, somehow in the last boot I am now on a boot loop of bad key cannot boot to OS of phone and the backup of the OS will restore but it still will not boot past the bad key loop. I can get to the twrp recovery and the bootloader but no functions work in bootloader twrp works flwlessly but I have no image for my device. Does anyone have the stock rom for the metro verision of moto e5 plus. I have found one for the Cricket version but specs are all wrong. Any help would be appreciated
edit resolved with
cant post link to resolution
Click to expand...
Click to collapse
Hey, even if you can't post a link to the resolution I'd love to have more info! Please either PM me or post a tut, since this looks to be a bit problematic and I'm gonna jump on a freebie from MetroPCS.
Would really appreciate it thx!
Those of you who seek root on the MetroPCS Moto E5 play, I got you
I was working on a simple, straight forward walk through. Maybe just pm me for the details. Would be easier to do it that way being as I'm currently @ work. I can't figure out how to post a pic directly from my Moto E, but if you pm, I'll send you some verification. I soft bricked mine 3 times trying to get it figured out. You know what they say though. 3rd time is the charm. PS, don't flash anything other than recovery!!! The no-verity will cause you to boot loop.
Walkthrough
Okay so here goes keep in mind I cannot post links so mentions of the downloads will be just that, only mentions. The method I used to resinall the os is below. Keep in mind I still had access to both the boot loader and TWRP and that prior to my boot loop no os error I did have developer options and both usb debugging and oem unlock on
How To install Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo OS
Before you begin, it is important to have all the tools at hand. you will need:
Recharge your phone’s battery well(with more than 70% battery)
Save all your personal data (SMS, contacts, applications, settings, documents, music, photos, etc.)
install Motorola USB drivers,SDK drivers
Download Motorola Moto E5 Plus XT1924-# variant stock firmware
ENABLE USB DEBUGGING:
1. Go to Settings> About phone
2. Find the Build number and press 8 times on it:
3. Return to the previous screen. You will see that a line has appeared: “Developers Options”
4. Press and check “USB Debugging” & “OEM unlocking”
Procedure I used to reinstall OS starts below keep in mind I cannot post links as such you will need to google your phones product/variant to find the correct file, in the case of both the ATT and Metro/Tmobile version of the E5 Plus that is Hanna XT1924-7 and is visible in the bootloader.
Update Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo
1- Open the folder where ADB and Fastboot are located on your computer & Unzip the downloaded zip file in it preferably in its own directory.
2- In an empty area inside of the unzipped file directory hold down the shift key and right-click with the mouse, the context menu will contain an entry Open command window here:
3- Restart your Moto E5 Plus XT1924 in Recovery mode:
Press & hold the “Volume Down + Power button” at the same time for about 5 seconds
The device enters on Bootloader mode.
4- Connect your Moto E5 Plus XT1924 to your computer
5- Verify that the phone is recognized in Fastboot mode: Type in the command: “fastboot devices”
6- To Install Moto E5 Plus XT1924 Android 8.0 Oreo OTA, Type the following commands removing any bin, img, and sparsechunk commands that don't match your download. The Flash process might take about 25 minutes to complete.
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.# (do this for each numbered variant normally starting with 0)
fastboot flash system_b system_b.img_sparsechunk.# (do this for each numbered variant normally starting with 0)
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.# (do this for each numbered variant normally starting with 0)
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Click to expand...
Click to collapse
7- Once the update process finishes, reboot Moto E5 Plus XT1924 by selected Reboot system now.
8- You have successfully installed Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo OS
archnemesis2099 said:
Okay so here goes keep in mind I cannot post links so mentions of the downloads will be just that, only mentions. The method I used to resinall the os is below. Keep in mind I still had access to both the boot loader and TWRP and that prior to my boot loop no os error I did have developer options and both usb debugging and oem unlock on
How To install Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo OS
Before you begin, it is important to have all the tools at hand. you will need:
Recharge your phone’s battery well(with more than 70% battery)
Save all your personal data (SMS, contacts, applications, settings, documents, music, photos, etc.)
install Motorola USB drivers,SDK drivers
Download Motorola Moto E5 Plus XT1924-# variant stock firmware
ENABLE USB DEBUGGING:
1. Go to Settings> About phone
2. Find the Build number and press 8 times on it:
3. Return to the previous screen. You will see that a line has appeared: “Developers Options”
4. Press and check “USB Debugging” & “OEM unlocking”
Procedure I used to reinstall OS starts below keep in mind I cannot post links as such you will need to google your phones product/variant to find the correct file, in the case of both the ATT and Metro/Tmobile version of the E5 Plus that is Hanna XT1924-7 and is visible in the bootloader.
Update Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo
1- Open the folder where ADB and Fastboot are located on your computer & Unzip the downloaded zip file in it preferably in its own directory.
2- In an empty area inside of the unzipped file directory hold down the shift key and right-click with the mouse, the context menu will contain an entry Open command window here:
3- Restart your Moto E5 Plus XT1924 in Recovery mode:
Press & hold the “Volume Down + Power button” at the same time for about 5 seconds
The device enters on Bootloader mode.
4- Connect your Moto E5 Plus XT1924 to your computer
5- Verify that the phone is recognized in Fastboot mode: Type in the command: “fastboot devices”
6- To Install Moto E5 Plus XT1924 Android 8.0 Oreo OTA, Type the following commands removing any bin, img, and sparsechunk commands that don't match your download. The Flash process might take about 25 minutes to complete.
7- Once the update process finishes, reboot Moto E5 Plus XT1924 by selected Reboot system now.
8- You have successfully installed Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo OS
Click to expand...
Click to collapse
so i have the very exact issue as the OP, i tried this step, all i got was a error after using fastboot, doing the whole command in the cmd window, once it was done i got a endless moto start up icon, i rebooted, it kept giving me the " bad key" blank black page, then N/A, i booted back to twrp wiped and cleaned data to try again, then this time when i tried again i every command was met with errors saying " downgrade verifaction, or something like that, each line was basiclly and error. wont let me try to do the stock install again... im kinda at a lost end here.
stock187 said:
so i have the very exact issue as the OP, i tried this step, all i got was a error after using fastboot, doing the whole command in the cmd window, once it was done i got a endless moto start up icon, i rebooted, it kept giving me the " bad key" blank black page, then N/A, i booted back to twrp wiped and cleaned data to try again, then this time when i tried again i every command was met with errors saying " downgrade verifaction, or something like that, each line was basiclly and error. wont let me try to do the stock install again... im kinda at a lost end here.
Click to expand...
Click to collapse
People don't really tell you how to fix the issue so if you still need help getting your phone back to normal
I will help
Every post I have tried has been flawed or wrong or won't work
Sometimes people just post **** and don't think
PM me, i'll help you as well if you need it. What you have to do is download a platform tools folder and extract it because you need to open it and open up a command prompt within the platform tools folder for the restoration of the phone's stock ROM can be successfully flashed on the phone. I have everything you need to get your phone back operational again. I'll even help you root it successfully if you need more help, and i'll help you decrypt it. there's even a successful custom ROM that i'm using now that's better than the others since the others have so many problems booting up or issues within the ROM itself.
Moto e5 play root
Lord_Worm said:
I was working on a simple, straight forward walk through. Maybe just pm me for the details. Would be easier to do it that way being as I'm currently @ work. I can't figure out how to post a pic directly from my Moto E, but if you pm, I'll send you some verification. I soft bricked mine 3 times trying to get it figured out. You know what they say though. 3rd time is the charm. PS, don't flash anything other than recovery!!! The no-verity will cause you to boot loop.
Click to expand...
Click to collapse
I interested in rooting my metroPCS Moto e5 play but I don't really know what to do & I don't want to end up using a rooting program that will mess up my phone or not have at least a little knowledge of what I'm doing. Your post was the first one I came across and I was wondering if you might be able to help me with a little bit of knowledge. Please & thank you, I'd really appreciate it...
TalkNerdy2Me said:
I interested in rooting my metroPCS Moto e5 play but I don't really know what to do & I don't want to end up using a rooting program that will mess up my phone or not have at least a little knowledge of what I'm doing. Your post was the first one I came across and I was wondering if you might be able to help me with a little bit of knowledge. Please & thank you, I'd really appreciate it...
Click to expand...
Click to collapse
Shoot me a private message and I'll walk you through it
dominoeflux said:
PM me, i'll help you as well if you need it. What you have to do is download a platform tools folder and extract it because you need to open it and open up a command prompt within the platform tools folder for the restoration of the phone's stock ROM can be successfully flashed on the phone. I have everything you need to get your phone back operational again. I'll even help you root it successfully if you need more help, and i'll help you decrypt it. there's even a successful custom ROM that i'm using now that's better than the others since the others have so many problems booting up or issues within the ROM itself.
Click to expand...
Click to collapse
If you could help me out with rooting my moto e5 plus I would be grateful I have a question though my baseband version says M8940TMO_32.22.11.69R
HANNAH_NA_TMO_CUST and the Official TWRP app says my device is Hannah so do I use the James varient or the Hannah one is the plus and one is the play correct? Thank you for any help you might be able to give me.
toscrewed2matter said:
If you could help me out with rooting my moto e5 plus I would be grateful I have a question though my baseband version says M8940TMO_32.22.11.69R
HANNAH_NA_TMO_CUST and the Official TWRP app says my device is Hannah so do I use the James varient or the Hannah one is the plus and one is the play correct? Thank you for any help you might be able to give me.
Click to expand...
Click to collapse
yes, the plus is hannah and the regular e5 is the play...you have the hannah version.
None of this helps me. I unlocked the bootloader tried to install magisk or supersu, but it keeps bootlooping to n/a. I can only get into bootloader and from there to TWRP. That's it. I do have adb access...
Sent from my SM-G955U1 using Tapatalk
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Hold power and volume down til reboot into "bootloader" mode, plug usb-c cable to PC, then reflash later stock rom
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.
You have to go to the service center.
Hey msobarzoe13, I am using moto g6 and from India. When android p soak test was leaked as everyone out there, I tried it. It was good except for some network issues. So I decided to revert back to the stock firmware. I downloaded the OS and flashed it and faced the same issue. I tried several times but no luck. I was not even able to unlock the bootloader because I didn't turn on OEM unlock under settings. So I took it to the service center. The best part is by installing Beta your warranty is void. So I did it through the service center. They told Moto G6 series is very secured so flashing it with a leaked software is prevented. I don't know why. So don't take a further risk, take it to the service center.
Omar04 said:
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.
Click to expand...
Click to collapse
What you mean with "OG firmware" and what if the motorola is totally hardbricked? I mean not able to go to bootloader or recovery or even fastboot because he didnt turn on android debugging oem?
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
If your bootloader is still locked just take it to a moto service centre, I also tried downgrading and took it to service centre they fixed it
I have also hard bricked my moto g6 while updating. There was an OTA update and i started update without noticing my battery percentage. Now i have hard bricked dead moto g6. There is no response at all. Only life in my device is that it is detected as Qualcomm HS-USB QLoader 9008 in pc.
My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.
Jefersonrr said:
My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.
Click to expand...
Click to collapse
Same problem with me also. It may be detected as qualcomm hs-usb qloader 9008 while you connect in pc. If that is the problem than we need blank flash file which is not available right now. Either we have to send our device to service center for motherboard replacement or we need to wait for blank flash file which is not possible to come because these files are sensitive to motorola. another solution is if some one provide me mmcblk0.img of moto g6 than i might be able to boot it from sd card and may revive it again.
My Moto G6 Ali got hardbricked also plzzz help anyone solved it or have blankflash HE
Do anyone got any solution regarding this then plzzz help
:crying::crying::crying::crying::crying::crying:
Or email me at
??
[email protected]
Please help
Hello, recently i had some issues with my phone, and i thougt. well i should do a factory reset, just in case, but when i did the reset, the phone was in the same condition as before, so my next step was to reflash the stock rom, im not in custom ones btw, and my phone is still locked, long story short, with every program comand, and even oficial software, my phone refuses conection, with android cmd tools, its always stuck forever in a line called, sendig partition (45kb) and thats all it can be there for hours, the phone is just doing nothing, also the booloader oficial cmd, cant extract the key just sit there doing nothing, however, my phone is not bricked, bootloader devices detect my phone but i cant reflash the phone, i already tried the blank flash cmd, just say waiting for device. can someone help me with this issue? im not a noob, i already save one moto x with blank flash and rooted several past generations of moto phones.
priviet.toledo said:
Hello, recently i had some issues with my phone, and i thougt. well i should do a factory reset, just in case, but when i did the reset, the phone was in the same condition as before, so my next step was to reflash the stock rom, im not in custom ones btw, and my phone is still locked, long story short, with every program comand, and even oficial software, my phone refuses conection, with android cmd tools, its always stuck forever in a line called, sendig partition (45kb) and thats all it can be there for hours, the phone is just doing nothing, also the booloader oficial cmd, cant extract the key just sit there doing nothing, however, my phone is not bricked, bootloader devices detect my phone but i cant reflash the phone, i already tried the blank flash cmd, just say waiting for device. can someone help me with this issue? im not a noob, i already save one moto x with blank flash and rooted several past generations of moto phones.
Click to expand...
Click to collapse
Try LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
I had a similar problem just now - could not do anything in fastboot mode, LMSA failed as well. To solve it, I switched to another PC, and stopped using USB3 to USB-C custom cable, and used the original one I got with the phone (USB-C to USB-C). So my guess is, you need to connect to the PC with the original cable, directly, or just with a better cable than the one you were trying with.
my motog7 Lenovo android is stuck in bootloader mode tried to reset or restart nothing keeps jus sitting there Help
Gingerale2020 said:
my motog7 Lenovo android is stuck in bootloader mode tried to reset or restart nothing keeps jus sitting there Help
Click to expand...
Click to collapse
What does getvar all say
Code:
fastboot getvar all [/Code
[url]https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039[/url]