Related
Q&A for Get WP 10 for every Windows Phone and everyone with 3 easy steps
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Get WP 10 for every Windows Phone and everyone with 3 easy steps. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
thank you very much reker
you a man of this update !
but wht you mean about this : Your phone model infomation will be changed to Lumia 636 after using this method. If you want to change it back, tap the 3rd option in step 9.
i have W10 TP on my 1320 and 730
and everything on the 1320 is a lot better than the 730, how the f*ck is a non-support device turn out to be better
again, work like a charm on the 1320, just feel a little "preview-ish" on the 1320, but feel a whole lot "preview-ish" on the 730
hi
hey , how do reboot ? arre take power button ?
---------- Post added at 11:41 AM ---------- Previous post was at 11:32 AM ----------
How do reboot lumia 520 ? reset or restart ?
If I have a 1520 UK CV, what would I set the phonemanufacturername to?
I believe the mobile operator should be 000-GB?
I don't understand why I can't get the update to appear, I've tried several combinations!
525
cant do it on my lumia 525
phone get restart
but boot again into 8.1 and not 10
Windows Insider keeps crashing.
Not working... Please Help!
This is not working on my Orange Poland Lumia 930. I have no updates after reboot. I have OS: 8.10.14226.359 and firmware: 02450.00019.14522.26005
Help!
Lumia 520 Error
When i do all, i have error in Update.
(80190194)
How to solve It?
Hi,
I have followed this steps but after downloaded the update, on preprare installing my device get an error "The update was downloaded, but couldn't be opened. (8018830f). My phone is Lumia 820.
Please help me. Thank you.
hello guys ,
I have a HTC 8x Phone with Roger community carrier and i forgot to backup my phone model and etc. data , i used this way to get win 10 but my my phone name , HTC 8x c625a change to Nokia c625a and the font get small !! (probably resolution was increased )
is there anyone with same phone model to post me the screenshot of about page in windows insider app to change my phone data back to original one ?
Thanks
---------- Post added at 08:13 PM ---------- Previous post was at 08:03 PM ----------
hello
I have a HTC 8x Phone with Roger community carrier and i forgot to backup my phone model and etc. data , i used this way to get win 10 but my my phone name , HTC 8x c625a change to Nokia c625a and the font get small !! (probably resolution was increased )
is there anyone with same phone model to post me the screenshot of about page in windows insider app to change my phone data back to original one ?
Thanks
Help!
I have a Lumia 625 and when I open the insider app and hit "Get preview builds" the app Crashes.
Screamer125 said:
I have a Lumia 625 and when I open the insider app and hit "Get preview builds" the app Crashes.
Click to expand...
Click to collapse
Probably you have Preview for Developers already installed and you performed a hard reset.
After a hard reset, with OS Preview installed, it "break" the license of oem applications during the configuration of the phone, and this is why Windows Insider crash.
The solution is flash a rom.
Do you know if there is the possibility of having issues with the botloader and not be possible to use recovery?
525
Working good on 525
saif-aljanahi said:
thank you very much reker
you a man of this update !
but wht you mean about this : Your phone model infomation will be changed to Lumia 636 after using this method. If you want to change it back, tap the 3rd option in step 9.
Click to expand...
Click to collapse
It's revert to your phone's original model.
1st time you'll not see this option, because no backup information is found
---------- Post added at 12:36 PM ---------- Previous post was at 12:35 PM ----------
NOKIA3G said:
hey , how do reboot ? arre take power button ?
---------- Post added at 11:41 AM ---------- Previous post was at 11:32 AM ----------
How do reboot lumia 520 ? reset or restart ?
Click to expand...
Click to collapse
Follow the Windows Insider, if it not reboot your phone, means you don't need reboot
---------- Post added at 12:36 PM ---------- Previous post was at 12:36 PM ----------
kenit2212 said:
Hi,
I have followed this steps but after downloaded the update, on preprare installing my device get an error "The update was downloaded, but couldn't be opened. (8018830f). My phone is Lumia 820.
Please help me. Thank you.
Click to expand...
Click to collapse
Enlarge your phone internal storage space
Thanks but Help! Lumia 520
Thanks for sharing this much simpler method! I did everything correctly and finally I even got the update in Phone Update but after it downloads for about above 60%, I get error and when I try again it starts downloading from first. It's a pain in the ass. What is the problem and how can I solve i? I even tried redownloading for about 4 times now but the same problem persists. Also I would like to know if there is any way to stop the update from installing by itself after the download is complete. Pls help....
---------- Post added at 05:19 AM ---------- Previous post was at 05:13 AM ----------
Thanks for sharing this much simpler method! I did everything correctly and finally I even got the update in Phone Update but after it downloads for about above 60%, I get error and when I try again it starts downloading from first. It's a pain in the ass. What is the problem and how can I solve i? I even tried redownloading for about 4 times now but the same problem persists. Also I would like to know if there is any way to stop the update from installing by itself after the download is complete. Pls help....
change the server
This is my first post. I have successfully installed WP10 on my lumia 620 using the chinese method. Everything went good as expected.
Now i feel more confident to try the detailed method given in other thread so that my data doesn't go through a chinese server.
So my question is: I already have WP10 on my phone. If i have to reinstall WP10, do i have to do full reset with windows phone recovery tool, or is there any other method.
I tried no 520
I did everything correctly and finally I even got the update in Phone Update but after it downloads for about above 60%, I get error and when I try again it starts downloading from first. It's a pain in the ass. What is the problem and how can I solve i? I even tried redownloading for about 4 times now but the same problem persists. Also I would like to know if there is any way to stop the update from installing by itself after the download is complete. Pls help....
*Don't try it on Ativ S, unless you've somehow already secured the 8.10.14319.341.
Otherwise, faking your phone's identity will make it go through this update (before even thinking of WP10), which makes Ativ S phones reboot in a loop, forcing you to reflash your phone. That's the state my phone is in right now (I knew what I was walking into, I just wanted to try it)
Hi
Dear friends I have a big problem with FRP. I try a lot of methods but any one of them didnt work. I try:
1. By get in to mail or youtube but i get message that javascript is disable.
2. Get by web like before but i dont have any keyboard.
There is other metod to unlock this FRP? I bought phone a few days ago. In huawei service i must pay 50$
Hi! Try to downgrade the Android firmware to an earlier date.
but how, I dont have trwp even bootloader is locked olny i can in dial up *#*#2846579#*#* and then update but I dont know what i need to copy on sd card
djsobol said:
but how, I dont have trwp even bootloader is locked olny i can in dial up *#*#2846579#*#* and then update but I dont know what i need to copy on sd card
Click to expand...
Click to collapse
Download service ROMs here:-
https://androidhost.ru/
Instructions in zip.
Will work on stock phones.
I found a lot of ROMs but witch one will be good?
LLD-L31
djsobol said:
I found a lot of ROMs but witch one will be good?
LLD-L31
Click to expand...
Click to collapse
Well what model is your phone ?
LLD-L31 ( C434 ) is European.
Yes my country is important?
there is ADR, XAS, XVR what is mean this symbols?
So mine is LLD-L31 8.0.0.136 (C432).
Enter on http://androidhost.ru, and there search for the 8.0.0.125 (C432) firmware, it is the one with June patch, so I guess you can do the Talkback trick on it.
ok I'm downloading all 3 and witch one I should chose?
Upload the picture again.
ok
google
That three are not good.
Search for 8.0.0.125 one.
there arent other, could you tell me or sent a picture witch one i should download?
I will upload a link in a couple of minutes, I am on my phone now.
ok I'm looking forward to download it
djsobol said:
ok I'm looking forward to download it
Click to expand...
Click to collapse
Here's a link for B132 which should be early enough to allow the BL unlock exploit (should you need it) :-
https://androidhost.ru/6ps
---------- Post added at 04:37 PM ---------- Previous post was at 04:36 PM ----------
djsobol said:
there arent other, could you tell me or sent a picture witch one i should download?
Click to expand...
Click to collapse
There are at least 15 to choose from.
ok i unpack it and copy dload on sdcard??
Where i can find tutorial or something like that
@aka.petteri give me elier ver
You know, you can always email Huawei and request your FRP key and just use Fastboot to unlock FRP.
i write to support but they wont help me because i should have recipte and give it to service and pay 40-70$ if I have recipte of corse. In other way they wont help me.
djsobol said:
ok i unpack it and copy dload on sdcard??
Where i can find tutorial or something like that
@aka.petteri give me elier ver
Click to expand...
Click to collapse
Copy complete Dload folder onto root of SD card.
Power off phone.
Hold all three buttons Vol + Vol- Power and forced update should start.
---------- Post added at 04:55 PM ---------- Previous post was at 04:53 PM ----------
djsobol said:
i write to support but they wont help me because i should have recipte and give it to service and pay 40-70$ if I have recipte of corse. In other way they wont help me.
Click to expand...
Click to collapse
If you can prove ownership they will ( should) give you your FRP key, no need to go to a service centre at all.
This tool can be used to revive a bricked OP6T and remove the 'Device is corrupt' error message on boot.
Contains the latest MsmDownloadTool v4.0.59 and OOS v9.0.13 which is compatible with International and McLaren editions.
OOS v9.0.11 can also be used to convert a T-Mobile model into a fully fledged International model, more info here.
Make sure that your phone is switched off.
Open device manager on your Windows PC.
Press and hold the Volume Up & Volume Down buttons then connect to your PC using your data cable.
Once the device is connected to your Windows PC, check if the phone is being recognized (Other > QUSB_BULK or Ports > Qualcomm).
If showing as Other > QUSB_BULK either wait for Windows to install the Qualcomm driver or download one of the drivers below and install.
Run MsmDownloadTool V4.0 and click Start.
NOTE: This will completely wipe your device and relock your bootloader.
Downloads
6T MsmDownloadTool v4.0.59 (OOS v9.0.13)
6T MsmDownloadTool v4.0.58 (OOS v9.0.12)
6T MsmDownloadTool v4.0.58 (OOS v9.0.11)
6T MsmDownloadTool v4.0.58 (OOS v9.0.6)
6T MsmDownloadTool v4.0.58 (OOS v9.0.5)
Driver
Alternative driver
Shameless plugs - OP referral link for any peops that would like $20/£20/€20 discount: OnePlus or PayPal donation link: PayPal.
Wow nice. Now to test this on T-Mobile!! Let the flashing commence
Don't think this is a good idea; from what has been communicated the Modem for T-Mobile is different or has a different signature; you might end up with a brick. We we obviously won't find out unless we try. The problem is... you don't have an image to re-flash the T-Mobile version, so you might have to send it in.
im tempted to run this today on the tmobile model. how high is the risk of hard brick? will it leave me without fastboot if it doesnt work?
---------- Post added at 07:48 AM ---------- Previous post was at 07:47 AM ----------
dreinulldrei said:
Don't think this is a good idea; from what has been communicated the Modem for T-Mobile is different or has a different signature; you might end up with a brick. We we obviously won't find out unless we try. The problem is... you don't have an image to re-flash the T-Mobile version, so you might have to send it in.
Click to expand...
Click to collapse
apparently the flash to 9.0.5 in the other thread overwrites the modem anyway. its the criticals that dont overwrite. worst case im within my 14 days still, can alwasy return
dreinulldrei said:
Don't think this is a good idea; from what has been communicated the Modem for T-Mobile is different or has a different signature; you might end up with a brick. We we obviously won't find out unless we try. The problem is... you don't have an image to re-flash the T-Mobile version, so you might have to send it in.
Click to expand...
Click to collapse
I thought someone did dump a stock Tmo 9.0 out here?
---------- Post added at 02:20 PM ---------- Previous post was at 02:19 PM ----------
https://androidfilehost.com/?fid=11410963190603845445
SourPower said:
I thought someone did dump a stock Tmo 9.0 out here?
---------- Post added at 02:20 PM ---------- Previous post was at 02:19 PM ----------
https://androidfilehost.com/?fid=11410963190603845445
Click to expand...
Click to collapse
Yep, if a Dev can chime in that I won't be left with a hard brick and will be able to go back to TMobile firm atleastsr I'll jump. The only thing holding me back is that sim unlock and unlock bin. I don't wanna go thru that again if have to exchange.
SourPower said:
I thought someone did dump a stock Tmo 9.0 out here?
---------- Post added at 02:20 PM ---------- Previous post was at 02:19 PM ----------
https://androidfilehost.com/?fid=11410963190603845445
Click to expand...
Click to collapse
It's not how this tool works. A raw dump doesn't equal a flashable fastboot dump doesn't equal a msmdownloadtool ops file.
Edit: apparently you can't use the not equals symbol. I wrote a lengthy reply and it's gone. I'll write a shorter version.
My assumption is there is no version for the T-Mobile, but this will work for a full conversion. OP support will most likely not use this on the T-Mobile version and it's why we had to void our warranty when we unlocked the bootloader. They probably defer you to T-Mobile if you brick your phone. Now that being said, I bet this tool works just fine on the T-Mobile version and will turn it into a full international device capable of OTA updates and everything.
---------- Post added at 02:51 PM ---------- Previous post was at 02:43 PM ----------
strictlyphat said:
Yep, if a Dev can chime in that I won't be left with a hard brick and will be able to go back to TMobile firm atleastsr I'll jump. The only thing holding me back is that sim unlock and unlock bin. I don't wanna go thru that again if have to exchange.
Click to expand...
Click to collapse
One of three things will happen.
One, it will recognize it as the wrong device and won't flash at all.
Two, it will flash and you'll have a hard brick.
Three, it will flash and you'll have a fully converted International version.
If you have to return it to TMobile, you shouldn't have any issues returning it. A dead device is a dead device, the reps don't care. Also getting your new one unlocked should be no issue as all since you already had your first device unlocked. Just tell support that. Your device was unlocked and you had to RMA it. They will SIM unlock no problem. You will still have to wait 7 days for the unlock bin.
hartleyshc said:
It's not how this tool works. A raw dump doesn't equal a flashable fastboot dump doesn't equal a msmdownloadtool ops file.
Edit: apparently you can't use the not equals symbol. I wrote a lengthy reply and it's gone. I'll write a shorter version.
My assumption is there is no version for the T-Mobile, but this will work for a full conversion. OP support will most likely not use this on the T-Mobile version and it's why we had to void our warranty when we unlocked the bootloader. They probably defer you to T-Mobile if you brick your phone. Now that being said, I bet this tool works just fine on the T-Mobile version and will turn it into a full international device capable of OTA updates and everything.
Click to expand...
Click to collapse
Screw it. I'm gonna do this soon. Will report back
hartleyshc said:
It's not how this tool works. A raw dump doesn't equal a flashable fastboot dump doesn't equal a msmdownloadtool ops file.
Edit: apparently you can't use the not equals symbol. I wrote a lengthy reply and it's gone. I'll write a shorter version.
My assumption is there is no version for the T-Mobile, but this will work for a full conversion. OP support will most likely not use this on the T-Mobile version and it's why we had to void our warranty when we unlocked the bootloader. They probably defer you to T-Mobile if you brick your phone. Now that being said, I bet this tool works just fine on the T-Mobile version and will turn it into a full international device capable of OTA updates and everything.
---------- Post added at 02:51 PM ---------- Previous post was at 02:43 PM ----------
One of three things will happen.
One, it will recognize it as the wrong device and won't flash as at.
Two, it will flash and you'll have a hard brick.
Three, it will flash and you'll have a fully converted International version.
If you have to return it to TMobile, you shouldn't have any issues returning it. A dead device is a dead device, the reps don't care. Also getting your new one unlocked should be no issue as all since you already had your first device unlocked. Just tell support that. Your device was unlocked and you had to RMA it. They will SIM unlock no problem. You will still have to wait 7 days for the unlock bin.
Click to expand...
Click to collapse
Wanna find out? I'll probably test in a few, lol.
hartleyshc said:
It's not how this tool works. A raw dump doesn't equal a flashable fastboot dump doesn't equal a msmdownloadtool ops file.
Edit: apparently you can't use the not equals symbol. I wrote a lengthy reply and it's gone. I'll write a shorter version.
My assumption is there is no version for the T-Mobile, but this will work for a full conversion. OP support will most likely not use this on the T-Mobile version and it's why we had to void our warranty when we unlocked the bootloader. They probably defer you to T-Mobile if you brick your phone. Now that being said, I bet this tool works just fine on the T-Mobile version and will turn it into a full international device capable of OTA updates and everything.
---------- Post added at 02:51 PM ---------- Previous post was at 02:43 PM ----------
One of three things will happen.
One, it will recognize it as the wrong device and won't flash as at.
Two, it will flash and you'll have a hard brick.
Three, it will flash and you'll have a fully converted International version.
If you have to return it to TMobile, you shouldn't have any issues returning it. A dead device is a dead device, the reps don't care. Also getting your new one unlocked should be no issue as all since you already had your first device unlocked. Just tell support that. Your device was unlocked and you had to RMA it. They will SIM unlock no problem. You will still have to wait 7 days for the unlock bin.
Click to expand...
Click to collapse
Cuz I'm assuming it's the same as Samsung. One hardware multiple softwares.
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
Dark Nightmare said:
Wanna find out? I'll probably test in a few, lol.
Click to expand...
Click to collapse
Dude I will owe you one. Ur much braver than I. If my son falls asleep I'm trying to. PLEASE LET ME KNOW. And please let me buy u a beer lmfao
strictlyphat said:
Screw it. I'm gonna do this soon. Will report back
Click to expand...
Click to collapse
Guess I'll wait on your results...
Dark Nightmare said:
Guess I'll wait on your results...
Click to expand...
Click to collapse
I'm.having doubts man. Lol. What's your input. How likely I hard brick?
strictlyphat said:
I'm.having doubts man. Lol. What's your input. How likely I hard brick?
Click to expand...
Click to collapse
Since this will flash criticals, very likely, don't worry, my download is almost complete, I'll test it since my 6T is my spare device.
Dark Nightmare said:
Since this will flash criticals, very likely, don't worry, my download is almost complete, I'll test it since my 6T is my spare device.
Click to expand...
Click to collapse
Ah u r king. I had a backup iPhone til my daughter destroyed hers.
strictlyphat said:
Ah u r king. I had a backup iPhone til my daughter destroyed hers.
Click to expand...
Click to collapse
it fails, they do have a signature difference after all, I'm thinking we have to flash criticals/persist before this would work...maybe.
Dark Nightmare said:
it fails, they do have a signature difference after all, I'm thinking we have to flash criticals/persist before this would work...maybe.[/QUOTE
oof that sucks. thanks again
Click to expand...
Click to collapse
Safe flashing to anyone taking the plunge!
Dark Nightmare said:
it fails, they do have a signature difference after all, I'm thinking we have to flash criticals/persist before this would work...maybe.
Click to expand...
Click to collapse
tried it for good measure, same error
iaTa said:
This tool can be used to revive a bricked OP6T and remove the 'Device is corrupt' error message on boot.
Contains the latest MsmDownloadTool v4.0.58 and OOS v9.0.5 and is compatible with the non T-mobile international models (T-mobile compatibility currently unknown).
Make sure that your phone is switched off.
Open device manager on your Windows PC.
Press and hold the Volume Up & Volume Down buttons then connect to your PC using your data cable.
Once the device is connected to your Windows PC, check if the phone is being recognized (Other > QUSB_BULK or Ports > Qualcomm).
If showing as Other > QUSB_BULK either wait for Windows to install the Qualcomm driver or download the driver below and install.
Run MsmDownloadTool V4.0_factory.exe and click Start.
NOTE: This will completely wipe your device and relock your bootloader.
Downloads
MsmDownloadTool: https://androidfilehost.com/?fid=11410963190603846961
Driver: https://androidfilehost.com/?fid=24052804347798730
Shameless plug - my OP referral link for any peops that would like $20/£20/€20 discount: https://www.oneplus.com/invite#EC5BZVULJDUUO22
Click to expand...
Click to collapse
Oh my God you just saved my life brother. Thank you so much.
Dark Nightmare said:
it fails, they do have a signature difference after all, I'm thinking we have to flash criticals/persist before this would work...maybe.
Click to expand...
Click to collapse
Sad days... Appreciate the risks you've taken tho!!
HI Friends,
Please help me to sort my Samsung Note 8 (SM-N950F) Sim not Detecting after 01-July-2020 Patch Update.
Factory Reset it but still the same.
Re-seat the the Sim Tray ,Tried Different sims but still have the same issue.
Please help me
Thank you.
Exactly same thing happened today.
Same thing happened with me today.
I tried factory reset.
I also tried flashing latest rom using Odin but got system version mismatch error. device 11 binary 10
It's better to wait for next firmware update.
Can't even boot into recovery now.
Will get back if I get anything working again.
sim not detected
Same issue with me. did all methods, but now stuck, have to wait for next update
poor update , same issue iv been stuck from 4pm once the update kicked in.
Service centre too closes early cos of the pandemic.
Avoid the update for the guys who havent updated it. July patch india
please help us to at least rollback.
isurues said:
please help us to at least rollback.
Click to expand...
Click to collapse
Have you tried flashing SCDTF1 FIRMWARE! That's the only firmware you can flash for now.
Look for either XEU OR BTU, don't worry about your CSC as long as you are using the multi-CSC OXM firmware your CSC will be supported.
Same issue here as well
Yes I did got same issue after update .... Contacted samsung but they dont have any solution .... pls keep all of us posted with the solution if any .... Actual problem is with IMEI number not displaying which prevents Network to come up .... this is what one of the samsung representative told me ....
Everyone pls keep posted for any update on this.
BluePhnx said:
Have you tried flashing SCDTF1 FIRMWARE! That's the only firmware you can flash for now.
Look for either XEU OR BTU, don't worry about your CSC as long as you are using the multi-CSC OXM firmware your CSC will be supported.
Click to expand...
Click to collapse
I have tried N950FXXSCDTF1_N950FOXMCDTF1_BTU from Sammobile.
then it will be SW REV. Check fail(Bootloader) error due to latest version of BL
vinaykdmp said:
Same thing happened with me today.
I tried factory reset.
I also tried flashing latest rom using Odin but got system version mismatch error. device 11 binary 10
It's better to wait for next firmware update.
Can't even boot into recovery now.
Will get back if I get anything working again.
Click to expand...
Click to collapse
try to flash ins firmware without csc (BL, Ap, CP).. phone will boot.. you can use with wifi... at least work without sim...
chanchal.shohel said:
try to flash ins firmware without csc (BL, Ap, CP).. phone will boot.. you can use with wifi... at least work without sim...
Click to expand...
Click to collapse
Tell me a thing if samsung will rollout an update for fixing this will sammobile get it at same time?
Can u explaing the process please
hainguyenthao said:
Just edit build.prop and flash AP file custom then it will be fixed no need to wait next update
Click to expand...
Click to collapse
Can u explain the process please
A new update has arrived. using samfirm to download it. Will update once I try Odin.
Edit: downloaded via samfirm and installed via odin. Back to normal!
ver N950FXXSDDTG5
no need to pay sammobile for fast speed. samfirm takes it directly from samsung server.
New update rolled out on Sammobile. have downloaded it, by paying 300rs. from paypal for fast download. phone is working fine. download the update of 29/07/2020.
Xda doesnt allow new users to post link. so u have to check on its page.
vinaykdmp said:
Same thing happened with me today.
I tried factory reset.
I also tried flashing latest rom using Odin but got system version mismatch error. device 11 binary 10
It's better to wait for next firmware update.
Can't even boot into recovery now.
Will get back if I get anything working again.
Click to expand...
Click to collapse
Your update section is functional? I can't even search for the updates, throws can't connect error!
Amijaz said:
Your update section is functional? I can't even search for the updates, throws can't connect error!
Click to expand...
Click to collapse
Have you updated? With the latest rom
---------- Post added at 05:53 AM ---------- Previous post was at 05:48 AM ----------
kunal_07 said:
A new update has arrived. using samfirm to download it. Will update once I try Odin.
Edit: downloaded via samfirm and installed via odin. Back to normal!
ver N950FXXSDDTG5
no need to pay sammobile for fast speed. samfirm takes it directly from samsung server.
Click to expand...
Click to collapse
Thankyou for updating, really appriciated.
nickme36 said:
Have you updated? With the latest rom
---------- Post added at 05:53 AM ---------- Previous post was at 05:48 AM ----------
Thankyou for updating, really appriciated.
Click to expand...
Click to collapse
Finally, flashed the latest fixed firmware. My eyes opened when the VoLTE icon appeared during the setup. Back to normal! Thank god.
kunal_07 said:
A new update has arrived. using samfirm to download it. Will update once I try Odin.
Edit: downloaded via samfirm and installed via odin. Back to normal!
ver N950FXXSDDTG5
no need to pay sammobile for fast speed. samfirm takes it directly from samsung server.
Click to expand...
Click to collapse
Can I do this at home without visiting service centre ??
Will I lose data after you apply this update ? I mean do I need to do factory reset to apply this latest update ??
Official process which Samsung told me to do
NOTE:-
We do not have confirmation regarding WILL DATA BE LOST OR NOT
STEP 1:-
Kindly follow these steps Phone should be in Switch OFF state, follow the procedure as below: Long press “Volume Down + Power Key + Bixby Key”
STEP 2:-
After warning message will be displayed as shown in above image. Press the Volume up button and device will go to same state as shown. Connect the phone to laptop/desktop via USB Cable.
STEP 3:-
Click on the link and download 2 files in one Folder https://www.mediafire.com/folder/o2u26wfcpdz68/
STEP 4:-
After that Install Smart switch application in laptop/desktop before proceeding further (https://www.samsung.com/in/support/smart-switch/)
STEP 5:-
Connect device with laptop/desktop using USB cable
STEP 6:-
Double click “N950FXXSDDTG5” exe file which is downloaded from the link
STEP 7:-
After that Tool will be opened as shown below. Click “Start” Button
STEP 8:-
If “Pass” is displayed on tool screen as below then device will return to home screen after some time.
has anyone tried this method? please let me know if its working
---------- Post added at 05:11 PM ---------- Previous post was at 05:09 PM ----------
jazzydedania728 said:
NOTE:-
We do not have confirmation regarding WILL DATA BE LOST OR NOT
STEP 1:-
Kindly follow these steps Phone should be in Switch OFF state, follow the procedure as below: Long press “Volume Down + Power Key + Bixby Key”
STEP 2:-
After warning message will be displayed as shown in above image. Press the Volume up button and device will go to same state as shown. Connect the phone to laptop/desktop via USB Cable.
STEP 3:-
Click on the link and download 2 files in one Folder https://www.mediafire.com/folder/o2u26wfcpdz68/
STEP 4:-
After that Install Smart switch application in laptop/desktop before proceeding further (https://www.samsung.com/in/support/smart-switch/)
STEP 5:-
Connect device with laptop/desktop using USB cable
STEP 6:-
Double click “N950FXXSDDTG5” exe file which is downloaded from the link
STEP 7:-
After that Tool will be opened as shown below. Click “Start” Button
STEP 8:-
If “Pass” is displayed on tool screen as below then device will return to home screen after some time.
Click to expand...
Click to collapse
The link seems very fishy, should i trust this or report it.
SIM card not getting detected samsung note 8 SM-N950F
after the new update, for Samsung note 8 model SM-N950F
sim cards are not detectable,
IMEI number not available
not able to login to Samsung account
the software update on settings won't connect to Samsung servers now,
just wifi works,
Did factory reset, cleared all cache, no use, still the same.
plz any helps, i am stuck as i in a different country, none of the phones here as an issue, so they don't even know there is a problem,
---------- Post added at 06:49 PM ---------- Previous post was at 05:50 PM ----------
Rulinglionadi said:
has anyone tried this method? please let me know if its working
---------- Post added at 05:11 PM ---------- Previous post was at 05:09 PM ----------
The link seems very fishy, should i trust this or report it.
Click to expand...
Click to collapse
thisssss workssssssss :good::good::good::good::good:
So I got a Huawei P40 Pro Plus and I used by mistake my software files for P40 Pro. The Pro+ is now stuck and restarts every 2~3 minutes so I don't have enough time to download another version and repair it. I tried with system recovery on HiSuite as suggested in another thread but to no success. I wanted to ask if anyone knows where I can get the Huawei P40 Pro Plus stock firmware (ROM) so that I can flash it. All the ones I find don't have a dload file directory and are missing the SYSTEM.img file (instead there is this weird SUPER.img file).
Thank you in advance
I have the same problem, only on the contrary, I installed firmware from P40 Pro + on my P40 Pro. I am also looking for a solution to the problem, but unsuccessfully so far.
---------- Post added at 08:53 PM ---------- Previous post was at 08:44 PM ----------
Ashacreed said:
So I got a Huawei P40 Pro Plus and I used by mistake my software files for P40 Pro. The Pro+ is now stuck and restarts every 2~3 minutes so I don't have enough time to download another version and repair it. I tried with system recovery on HiSuite as suggested in another thread but to no success. I wanted to ask if anyone knows where I can get the Huawei P40 Pro Plus stock firmware (ROM) so that I can flash it. All the ones I find don't have a dload file directory and are missing the SYSTEM.img file (instead there is this weird SUPER.img file).
Thank you in advance
Click to expand...
Click to collapse
Try to restore via FASTBOOT according to this instruction: https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/System-Recovery-Rom-Instruction-(-Soft-Bricked-)
only you need the correct cust and preload files for your region.
Did the method work for anyone as I am facing the similar behavior
loser said:
Did the method work for anyone as I am facing the similar behavior
Click to expand...
Click to collapse
it worked for the person who posted it but not for me sadly. I bought the MRT software key and it just arrived seconds ago and I will try to repair it today or tomorrow. I wish you luck my dude sadly I don't know how to help. Can you amybe give more information
Would be interesting to know what exactly was done - I am struggling to get the firmware files placed on the right directory for Hisuite to detect and repair the phone . It keeps indicating firmware package files are missing .The background is I went from 1.56 to 1.31 and it has been a constant boot loop since then . Very expensive paperweight at the moment ,
loser said:
Would be interesting to know what exactly was done - I am struggling to get the firmware files placed on the right directory for Hisuite to detect and repair the phone . It keeps indicating firmware package files are missing .The background is I went from 1.56 to 1.31 and it has been a constant boot loop since then . Very expensive paperweight at the moment ,
Click to expand...
Click to collapse
You may be substituting invalid links in hisuite.proxy
You might be right . This is what I followed >
1. Prerequisites- OK
2.Full OTA -Installation Instructions :
You need to find the matching firmwares and link to them in the application.
The above is where I am stuck - how to link and what does ut even mean . I have got the firmware files downloaded , seems like the locked bootloader does not allow to go forward .
Any ideas ?
KINGZ_ said:
You may be substituting invalid links in hisuite.proxy
Click to expand...
Click to collapse
Remember-I am in a bootloop, cannot use hisuite proxy. I have actually downgraded using Hisuite Proxy so that works just fine .
Did you have any luck with the MRTKey >?
---------- Post added at 11:03 AM ---------- Previous post was at 10:27 AM ----------
Ashacreed said:
it worked for the person who posted it but not for me sadly. I bought the MRT software key and it just arrived seconds ago and I will try to repair it today or tomorrow. I wish you luck my dude sadly I don't know how to help. Can you amybe give more information
Click to expand...
Click to collapse
Could you advise what was done ?
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
loser said:
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
Click to expand...
Click to collapse
You will need to find out using fastboot which version is current on your device, and then use the dload firmware for your region.
To find out how to get the latest firmware information, check Fastboot for the OEM information. PLEASE see post #253 for instructions if needed. Then follow the instructions for recovery via fastboot.
(bootloader) :ELS-N39 10.1.0.157(C185E2R1P1)
OKAY [ 0.004s]
finished. total time: 0.005s
ELS-LGRP4-OVS 10.1.0.157
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)
Tried with C185 firmware - recovery fails at 89%. Then the same bootloop continues with the above version ( moved up from the problematic 1.31. Now trying with 1.62 which is an approved firmware .Fingers crossed.
loser said:
ELS-LGRP4-OVS 10.1.0.157
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)
Click to expand...
Click to collapse
yes, only if you have p40 pro +, you need a firmware database for p40 +. in my opinion for p40 + this is ELS-LGRP6-OVS
and I can't tell you exactly which PRELOAD file is right for you as there are four of them.
if you just have p40 pro, then cust & preload look for ELS-N29 and firmware ELS-LGRP4-OVS base.
loser said:
Remember-I am in a bootloop, cannot use hisuite proxy. I have actually downgraded using Hisuite Proxy so that works just fine .
Did you have any luck with the MRTKey >?
---------- Post added at 11:03 AM ---------- Previous post was at 10:27 AM ----------
Could you advise what was done ?
Click to expand...
Click to collapse
So far I have tried the MRT Key but it gives me failure when trying to establish a USB connection while the phone is in Fastboot mode. I am trying to find how to fix it right now and I hope it will work. I have tried Hisuite proxy before with versions 156, 144 and 132 but nothing worked for me so I will keep trying with fastbooting and the Key. Sadly I cannot say if it will be successful and if you should buy it for yourself. I found a tutorial on YouTube how to use it but that failure mentioned earlier is in the way and the recovery never gets past 5%.
KINGZ_ said:
yes, only if you have p40 pro +, you need a firmware database for p40 +. in my opinion for p40 + this is ELS-LGRP6-OVS
and I can't tell you exactly which PRELOAD file is right for you as there are four of them.
if you just have p40 pro, then cust & preload look for ELS-N29 and firmware ELS-LGRP4-OVS base.
Click to expand...
Click to collapse
Well I was trying with LGRP4- all this while , which might have been the problem . Thanks for the great hint . Let me give LGRP6 a shot now .
---------- Post added at 06:08 AM ---------- Previous post was at 05:19 AM ----------
loser said:
Well I was trying with LGRP4- all this while , which might have been the problem . Thanks for the great hint . Let me give LGRP6 a shot now .
Click to expand...
Click to collapse
Bummer - Recovery failed at 5%, no change in status unfortunately . While the preload and the cust zips seem to have the region specific C185 tags , there seems to be no way to identify the main file belonging to the same region for making sure all 3 files are correct. Any ideas here ?
loser said:
Bummer - Recovery failed at 5%, no change in status unfortunately . While the preload and the cust zips seem to have the region specific C185 tags , there seems to be no way to identify the main file belonging to the same region for making sure all 3 files are correct. Any ideas here ?
Click to expand...
Click to collapse
Hi there,
Got your PM & read this thread to get more info about your problem.
You would need to use dload firmware for C185. Using other methods like HiSuite Proxy or HiSuite recovery won't help you at this point. Even eRecovery will get you ''Getting package info failled''!
{Mod edit: Link removed! - Oswald Boelcke, Moderator}
@Ashacreed, it seems that you got yourself a hardbricked device, because you've flashed a firmware from a diferent phone model, so in your case a new motherboard is required...
Kdrgs,
SilviuO
SilviuO said:
Hi there,
Got your PM & read this thread to get more info about your problem.
You would need to use dload firmware for C185. Using other methods like HiSuite Proxy or HiSuite recovery won't help you at this point. Even eRecovery will get you ''Getting package info failled''!
@Ashacreed, it seems that you got yourself a hardbricked device, because you've flashed a firmware from a diferent phone model, so in your case a new motherboard is required...
Kdrgs,
SilviuO
Click to expand...
Click to collapse
Dear SilviuO,
Thanks for getting back .
Nothing for C185 listed on easy-firmware , okay to flash with something else ? To be honest I made the most progress with Hisuite proxy method but unable to complete fully beyond 89% and the phone keeps in the bootloop every 1min 15 secs. Camera has become upside down and IMEI has become unknown .
I seem to have little hope .
Thoughts ?
loser said:
Dear SilviuO,
Thanks for getting back .
Nothing for C185 listed on easy-firmware , okay to flash with something else ? To be honest I made the most progress with Hisuite proxy method but unable to complete fully beyond 89% and the phone keeps in the bootloop every 1min 15 secs. Camera has become upside down and IMEI has become unknown .
I seem to have little hope .
Thoughts ?
Click to expand...
Click to collapse
You could try flashing other firmware (ex. for C605 or C432) using this method from my thread. You also need to rename those 2 zips (update_sd_cust&update_sd_preload) to match C185 dload firmware folder names . Be advised that this would be the first time someone tries the method explained on a P40 Pro / P40 Pro+ unit!
Cheers,
SilviuO
SilviuO said:
You could try flashing other firmware (ex. for C605 or C432) using this method from my thread. You also need to rename those 2 zips (update_sd_cust&update_sd_preload) to match C185 dload firmware folder names . Be advised that this would be the first time someone tries the method explained on a P40 Pro / P40 Pro+ unit!
Cheers,
SilviuO
Click to expand...
Click to collapse
Giving it a try as per your guide- wish me luck
---------- Post added at 09:44 AM ---------- Previous post was at 09:15 AM ----------
No luck -Software install failed , Incompatibility with current version . Please download the correct update package .
loser said:
Giving it a try as per your guide- wish me luck
---------- Post added at 09:44 AM ---------- Previous post was at 09:15 AM ----------
No luck -Software install failed , Incompatibility with current version . Please download the correct update package .
Click to expand...
Click to collapse
Guess that you will have to wait for a proper C185 dload firmware with a higher build number than the one you're currently on and try flashing again.
Kdrgs,
SilviuO
Version has upgraded to 1.62 but the issues are not resolved - because the flashing never completed fully looks like . The factor of the main file being not indicated as the main location based file marked for C185 region . I have got cust and preloaded files which C185 version , which seems to be not good enough . Interestingly wipe cache partition and factory reset do not seem to have any impact whatsoever on error , which I find strange based on my Android experience.
ELS-LGRP6-OVS 10.1.0.162
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)