Related
Hi!
Does anybody know if there already exists a custom Kernel which uses TWRP instead of CWM? I mean a Kernel for (or which runs on) ICS.
Greetings
Louis235 said:
Hi!
Does anybody know if there already exists a custom Kernel which uses TWRP instead of CWM? I mean a Kernel for (or which runs on) ICS.
Greetings
Click to expand...
Click to collapse
Wrong slection .....ask on general or q/a selection
Sent from my LT18i using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=2075562
emwno said:
Im porting/bringing twrp recovery to ics devices or stock (not cm9). I have moved on to a new phone, still have my pro but cant test as its with my bro. heres the boot.img, twrp should work properly, i dont know if it'll boot the stock ics roms i.e pureness etc. so test and report if you could please.
Thankyou!.
newboot.img
Click to expand...
Click to collapse
Try this... Xperia pro only
themrperfecto said:
Try this... Xperia pro only
Click to expand...
Click to collapse
Sadly I got an Arc S. But thanks for your reply
Try this dude...TWRP And CMW recovery
Actually I have been porting a HTC sense 4.2 Rom From Galaxy Gio To Galaxy Mini
I was struck at status 6 error which is sucess fully solved and ROM sucessfully Installs in CWM but when I Boot Nothing Happens after Samsung Logo the custom Boot animation even doesn't show up
I have using CM7 as base as the Gio Rom is also on 2.3.6
any sugesstion what should I do
rupesh1718 said:
Actually I have been porting a HTC sense 4.2 Rom From Galaxy Gio To Galaxy Mini
I was struck at status 6 error which is sucess fully solved and ROM sucessfully Installs in CWM but when I Boot Nothing Happens after Samsung Logo the custom Boot animation even doesn't show up
I have using CM7 as base as the Gio Rom is also on 2.3.6
any sugesstion what should I do
Click to expand...
Click to collapse
Gio ROM is based on CM7 or stock ?
F4uzan said:
Gio ROM is based on CM7 or stock ?
Click to expand...
Click to collapse
here it is
http://forum.xda-developers.com/showthread.php?t=1821701&highlight=htc+sense
rupesh1718 said:
here it is
http://forum.xda-developers.com/showthread.php?t=1821701&highlight=htc+sense
Click to expand...
Click to collapse
Ohh... my ! You won't port that ROM easily. It would takes a hundred hours to make it working & booting. CM7 isn't a right base.
Bugs:
- RIL FIXED
- no data
- wifi
- bluetooth
- camera/camrecorder
- sd card not detected FIXED
- htc bootanimation stays too long(only at booting, not with phone unlock)
- sound FIXED
- sensors
-backlights
- more I haven't found or not able to test (yet)
Click to expand...
Click to collapse
Why do you want to port an alpha ROM?
chemicalrage said:
Why do you want to port an alpha ROM?
Click to expand...
Click to collapse
Any other suggestion do u have
F4uzan said:
Ohh... my ! You won't port that ROM easily. It would takes a hundred hours to make it working & booting. CM7 isn't a right base.
Click to expand...
Click to collapse
What base is to be used
Please Help me
Updater-script problem...
Status 6 is basically trying to read a file that's not encoded in UNIX. Thanks ChevyNo1 for pointing that out!
Click to expand...
Click to collapse
<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
raducu7890 said:
Updater-script problem...<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
Click to expand...
Click to collapse
Dude i actually sucessfull solved the status 6 error already before posting here My problem is Rom get Install but does not gets bootup just shows samsung logo didnt even shows my custom Bootanimation
rupesh1718 said:
Dude i actually sucessfull solved the status 6 error already before posting here My problem is Rom get Install but does not gets bootup just shows samsung logo didnt even shows my custom Bootanimation
Click to expand...
Click to collapse
Oh...right...what kernel did u used??
raducu7890 said:
Updater-script problem...<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
Click to expand...
Click to collapse
raducu7890 said:
Oh...right...what kernel did u used??
Click to expand...
Click to collapse
Cm 7.2 as a base should i change this
rupesh1718 said:
Cm 7.2 as a base should i change this
Click to expand...
Click to collapse
Kernel he said, not ROM base. It isn't that easy porting a Sense ROM. Even, if you make it booted, you'll have a tons of bugs.
Sense isn't really that easy to port, you'll need to understand kernel, and system better before porting Sense.
how to port a rom--> http://forum.xda-developers.com/showthread.php?t=1598713
go to "porting from a different manufacturer"...have you done that step??
F4uzan said:
Kernel he said, not ROM base. It isn't that easy porting a Sense ROM. Even, if you make it booted, you'll have a tons of bugs.
Sense isn't really that easy to port, you'll need to understand kernel, and system better before porting Sense.
Click to expand...
Click to collapse
raducu7890 said:
how to port a rom--> http://forum.xda-developers.com/showthread.php?t=1598713
go to "porting from a different manufacturer"...have you done that step??
Click to expand...
Click to collapse
Both will help me its hard but not impossible
rupesh1718 said:
Both will help me its hard but not impossible
Click to expand...
Click to collapse
Yep, it's not impossible. Finished porting one, got it booting without touchscreen, sound, and vibration. IDK for the rest since i can't move any elements on screen.
F4uzan said:
Yep, it's not impossible. Finished porting one, got it booting without touchscreen, sound, and vibration. IDK for the rest since i can't move any elements on screen.
Click to expand...
Click to collapse
Hope We keep Helping each other
rupesh1718 said:
Hope We keep Helping each other
Click to expand...
Click to collapse
Oh... thanks !
I still don't know what happened in touchscreen. Logged the phone, but doesn't find anything related touchscreen.
Can i install SM-G730A rom on GT-I8190?
mostafiz80 said:
Can i install SM-G730A rom on GT-I8190?
Click to expand...
Click to collapse
No. It WILL brick your device. Install any CM rom if you want something beyond 4.1.2.
KAGE-008 said:
No. It WILL brick your device. Install any CM rom if you want something beyond 4.1.2.
Click to expand...
Click to collapse
i need official kitakat for my GT-I8190
its possible?
mostafiz80 said:
i need official kitakat for my GT-I8190
its possible?
Click to expand...
Click to collapse
It isn't. Samsung had planned the KitKat update but cancelled it because TouchWiz+KK wouldn't run with 1GB of RAM, that affected the original S3 too.
Hi guys,
just finished building TWRP 3.0.2-0 for the Z5
Download
TWRP-for-CM (folder)
recovery_3.0.2.img (fastboot flashable file)
Source:
https://github.com/omnirom/android_bootable_recovery (TWRP, recovery - place in bootable/recovery-twrp)
https://github.com/CyanogenMod (CyanogenMod source)
https://github.com/Sony-Kitakami (place in .repo/local_manifests )
Build:
Code:
source build/envsetup.sh
lunch cm_sumire-userdebug
mka clobber && mka recoveryimage RECOVERY_VARIANT=twrp
Thanks to @moonbutt74 for bearing with me and all my questions :silly:
Not Working on E6633 , When I power on the device , Sony logo show and the device power off immediately
Edit :
It works Successfully , I had flashed It as a kernel hahaha
Thank You ^_^
Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx
Sh4douw said:
Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx
Click to expand...
Click to collapse
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)
Sh4douw said:
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)
Click to expand...
Click to collapse
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem
Sony guy said:
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem
Click to expand...
Click to collapse
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD
Sh4douw said:
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD
Click to expand...
Click to collapse
Click here to download the rom
http://forum.xda-developers.com/xperia-z5/development/rom-cyanogenmod-13-sony-xperia-z5-t3356163/page11
And Gapps you can find it in the first page of the above thread
Okay, I don't understand why, but for booting on CM, I had to reflash the kernel !
Without it, my device power off one second after the Sony logo
It finally works, thanks you
Hi,
Are you able to make one for the Z5P??
some of us are still stuck at ver 2.8.
also, i have used your root kernel program with the lastest twrp and it can boot into recovery,since i am using a custom kernel, i think it will be nice if there is a flashable img file for the latest twrp.
Many thanks in advance.
Will this work with my new Z5, Android 6.0.1, totally stock?
Nayibmc said:
Will this work with my new Z5, Android 6.0.1, totally stock?
Click to expand...
Click to collapse
No. Just Cm/Aosp
Sent from my Xperia Z5 using XDA-Developers mobile app
How can amplify the sound in Bluetooth?
Sergeyra29 said:
How can amplify the sound in Bluetooth?
Click to expand...
Click to collapse
Faux sound setting in Kernel Adiutor is not working(im on Z5 RR latest build plus Zach's kernel), but it working on Romaur 4.2.0 plus Aur-kernel 4.0.
try "FauxSound app v1.5" from play store, its worked with wired headset, maybe worked with Bluetooth too.
Sent from my Xperia Z5 using XDA-Developers mobile app
How can amplify the sound in Bluetooth mixer_paths?
Sorry wrong reply. XD
Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you
adize said:
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you
Click to expand...
Click to collapse
1 - fastboot flash recovery x.img
2 - I think this recovery is for CM ROM
You can search in the android development section for stock ROM , it works on all firmwares
Hi guys, noob question here: I have twrp old version, can I flash this in recovery?
And also I want to try the xz rom but tried flashing and didn't work, it is my understanding that it was caused by the old twrp and using this I'll be able to use that rom.
Thank you for your help.
Sent from my E6653 using XDA-Developers mobile app
[emoji41]
oh, sorry, wrong thread
Anyone knows if there is any Paranoid Android 7.2 build for cancro? Any idea if cancro will ever get official support for PA again?
https://www.androidfilehost.com/?fid=817550096634775750
There is a aospa unofficial build by travarilo. Pls flash this and report how it is in here.
EDIT# I tried it. Rom is not booting stuck at bootloop
kaiz16 said:
https://www.androidfilehost.com/?fid=817550096634775750
There is a aospa unofficial build by travarilo. Pls flash this and report how it is in here.
EDIT# I tried it. Rom is not booting stuck at bootloop
Click to expand...
Click to collapse
@travarilo, any idea about this? Any plan to make it work?
kaiz16 said:
https://www.androidfilehost.com/?fid=817550096634775750
There is a aospa unofficial build by travarilo. Pls flash this and report how it is in here.
EDIT# I tried it. Rom is not booting stuck at bootloop
Click to expand...
Click to collapse
chiwawa10 said:
@travarilo, any idea about this? Any plan to make it work?
Click to expand...
Click to collapse
flash this kernel right after flashed rom
https://www.androidfilehost.com/?fid=961840155545586555
travarilo said:
flash this kernel right after flashed rom
https://www.androidfilehost.com/?fid=961840155545586555
Click to expand...
Click to collapse
will you do other build with the new changes?