Database Develop

P20 Pro CLT-L09 (SP6C900) update?

Hi all, I'm at my wit's end and would really appreciate any advice.
So I have the p20 pro variant in the title, it's still on EMUI 8.1 and has a lot of bugs. Hicare can't find an update, neither can hisuite.
I tried FF and downloaded a Full-OTA update that was approved for my IMEI. I tried flashing it via Dload method but it reboots to the recovery and says software update failed.
Using the erecovery method with DNS change also does not work as it has some error parsing the update.
The phone works fine otherwise but all these small software niggles are getting to me.
Anyone have any suggestions on how to update this phone to EMUI 9.1? It is not bootloader unlocked.
Thank you for reading this far.

Have you already tried the modified version of hisuite?

Macmoc16 said:
Have you already tried the modified version of hisuite?
Click to expand...
Click to collapse
I have not! Looks like my googlefu is weaker than I thought. Looking into it now and will report back if it works.

So I tried the modified HiSuite method with HStool but I get the error "Your device is not supported". I don't really know where to go from here.

Huawei P40 Pro soft brick (Reboot only)

Hello!
I wanted to install Google services on my HUAWEI P40 PRO C10E7R3P1. I decided to roll back the firmware via Hisuite.Proxy - I installed the els-lgrp6 firmware by mistake and got a soft brick. Now my phone is constantly restarting.
The phone turns on, works for a few seconds and reboots. The menu displays Imei - null. In the service menu (* # * # 2846579 # * # *) shows CUST - UNKNOWN. I also tried it via eBackup Wi-Fi, it gives an error. I Found service three-file firmware 10.1.0.114 (C432E8R5P2) dload via Recovery otg, which was recommended for 4pda, also gives an error. Through FASTBOOT and hisuite.proxy, I cannot find the files I need for the c10 region. More precisely, I found only PRELOAD els-n29-preload 10.1.0.1 (c10R6) on the FIRMWARE FINDER TO HUAWEI website and nowhere can I find the CUST C10 file.
I tried to install c432 (ELS-N29-CUSTC4321B6 (10. 1.0.6) and ELS-N29-PRELOAD 10. 1.0.1 (C432R6)), it gives an error during installation.
Please help me find a way

Hello bro, I can unbrick your phone, {Mod edit}

KINGZ_ said:
Hello!
I wanted to install Google services on my HUAWEI P40 PRO C10E7R3P1. I decided to roll back the firmware via Hisuite.Proxy - I installed the els-lgrp6 firmware by mistake and got a soft brick. Now my phone is constantly restarting.
The phone turns on, works for a few seconds and reboots. The menu displays Imei - null. In the service menu (* # * # 2846579 # * # *) shows CUST - UNKNOWN. I also tried it via eBackup Wi-Fi, it gives an error. I Found service three-file firmware 10.1.0.114 (C432E8R5P2) dload via Recovery otg, which was recommended for 4pda, also gives an error. Through FASTBOOT and hisuite.proxy, I cannot find the files I need for the c10 region. More precisely, I found only PRELOAD els-n29-preload 10.1.0.1 (c10R6) on the FIRMWARE FINDER TO HUAWEI website and nowhere can I find the CUST C10 file.
I tried to install c432 (ELS-N29-CUSTC4321B6 (10. 1.0.6) and ELS-N29-PRELOAD 10. 1.0.1 (C432R6)), it gives an error during installation.
Please help me find a way
Click to expand...
Click to collapse
Hi! did you find a solution?? I'm in the same annoying situation

ElMery said:
Hi! did you find a solution?? I'm in the same annoying situation
Click to expand...
Click to collapse
No, I never found a solution to this problem. I gave it to the warranty service center for repair, where the motherboard was replaced.

KINGZ_ said:
No, I never found a solution to this problem. I gave it to the warranty service center for repair, where the motherboard was replaced.
Click to expand...
Click to collapse
Did you pay or it was under warranty?

ElMery said:
Did you pay or it was under warranty?
Click to expand...
Click to collapse
no, I didn't pay anything.

KINGZ_ said:
no, I didn't pay anything.
Click to expand...
Click to collapse
Last question: how much did it take to be done?
Tomorrow I'll go to the service center.

ElMery said:
Last question: how much did it take to be done?
Tomorrow I'll go to the service center.
Click to expand...
Click to collapse
did it for 5 days.

accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????

KKYASIR said:
accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????
Click to expand...
Click to collapse
i have the same problem, any solution ?

saleemz said:
i have the same problem, any solution ?
Click to expand...
Click to collapse
i took it to Huawei service center and they changed the motherboard (under warranty) in 6 hours and returned my P40 pro. .. this is the only solution if you have installed wrong OS via Hisuit proxy ..

saleemz said:
i have the same problem, any solution ?
Click to expand...
Click to collapse
we messed with the motherboard while installing wrong OS via HiSuit proxy, take your mobile to Huawei Customer Service center to change the motherboard. this is the only solution ..

Nick said:
Hello bro, I can unbrick your phone, Give me a message on facebook profile: (Shunior Max).
Click to expand...
Click to collapse
I had the exact same problem with my Huawei P40 Pro. I have sent the phone to huawei and they said they have to replace the main board. Yesterday I contacted Nick and he really managed to repair my phone via teamviewer. I can highly recommend him. No it is fully working again.

Nick said:
Hello bro, I can unbrick your phone, {Mod edit}
Click to expand...
Click to collapse
Hello. How do you unbrick it? is it remotely like anydesk or teamviewer? Do I need any kind of special cables? How much does it cost?
Sorry for so many questions

i brick my p40 pro

Hello, with hisuite proxy, I accidentally installed the firmware of the p40pro + on my p40 pro .. now it only reboots and impossible to downgrade it because of reboots .. I saw that there were paid solutions but I can't find, know you help me please

Have you tried entering in recovery mode? Is it possible?
Also they are some special tools to fix the phone but you ned to take it to a phone place

Roalback

Hello everyone. I'm very disappointed at 10.1 update with camera results specially at nigh mode.. Yesterday night I roaled back to 10.0.0.175 version. I tested night mode on. Same scenario and there wasnt so much noise at 10.1 version... So I want to return at 10.0.0.185 or 180 update witch was best update for camera.. The problem is that version isn't available on huwawei pc suite.. I'm not rooted any solutions?
Thnk you all

step-by-step downgrade via HiSuite to 9.1.0.x and then step-by-step upgrade via OTA up to the necessary version of 10.0.x.x.

rm001 said:
step-by-step downgrade via HiSuite to 9.1.0.x and then step-by-step upgrade via OTA up to the necessary version of 10.0.x.x.
Click to expand...
Click to collapse
Hello brother, it can't be happen... Yesterday I roaled back to 10.0.0.175 phone jumped to 195 and then to 10.1.0.. 120 etc etc 10.1.0.181...Although I'm asking how I can update to 10.0.0.180-185

Noexcusses said:
Hello brother, it can't be happen... Yesterday I roaled back to 10.0.0.175 phone jumped to 195 and then to 10.1.0.. 120 etc etc 10.1.0.181...Although I'm asking how I can update to 10.0.0.180-185
Click to expand...
Click to collapse
Ok, but why you didn`t roll back from 10.0.0.175 down to 9.1.0.x? When you press "Upgrade" in the HiSuite, there is an option "Other versions", you choose it, and there is a possibility to downgrade the FW. You downgrade step-by-step to 9.1.0.x, then start to uograde to 10.0.x.x. and stop when you find the suitable FW.

rm001 said:
Ok, but why you didn`t roll back from 10.0.0.175 down to 9.1.0.x? When you press "Upgrade" in the HiSuite, there is an option "Other versions", you choose it, and there is a possibility to downgrade the FW. You downgrade step-by-step to 9.1.0.x, then start to uograde to 10.0.x.x. and stop when you find the suitable FW.
Click to expand...
Click to collapse
Because I thought I was already fine on 10.0.0.175 to update on 10.0.0.185.. What was my mistake?

In this case, I do not know, maybe now the upgrade plan is different from the previous one, maybe they have now excluded some intermediate versions of FW ...

rm001 said:
In this case, I do not know, maybe now the upgrade plan is different from the previous one, maybe they have now excluded some intermediate versions of FW ...
Click to expand...
Click to collapse
Yeah... Sad...

rm001 said:
In this case, I do not know, maybe now the upgrade plan is different from the previous one, maybe they have now excluded some intermediate versions of FW ...
Click to expand...
Click to collapse
Download: Firmware 10.0.0.186 Android 10 - Huawei P30 Pro - VOG-L29 [Europe] - Carbon Tesla Downloads
Download the full 10.0.0.186 firmware update for Huawei P30 Pro (VOG-L29) devices in Europe via the direct link provided below. This update is based on Android 10 with EMUI 10 on top. Package Details ShareTweetShareShare0 Shares
huaweidl.com
Do you know if I need unlocked bootloader to install this firmware? Thnks

Noexcusses said:
Download: Firmware 10.0.0.186 Android 10 - Huawei P30 Pro - VOG-L29 [Europe] - Carbon Tesla Downloads
Download the full 10.0.0.186 firmware update for Huawei P30 Pro (VOG-L29) devices in Europe via the direct link provided below. This update is based on Android 10 with EMUI 10 on top. Package Details ShareTweetShareShare0 Shares
huaweidl.com
Do you know if I need unlocked bootloader to install this firmware? Thnks
Click to expand...
Click to collapse
you can install it with locked bootloader. But after installation it will cause a hard reset and delete all information even in user part of memory. Backup your files.

rm001 said:
you can install it with locked bootloader. But after installation it will cause a hard reset and delete all information even in user part of memory. Backup your files.
Click to expand...
Click to collapse
I have no prob with reset. Just tell me this. Should roalback to 10.0.0.175 first and then update to 10.0.0.185 or just install 10.0.0.185 on 10.1.0.181?

Noexcusses said:
I have no prob with reset. Just tell me this. Should roalback to 10.0.0.175 first and then update to 10.0.0.185 or just install 10.0.0.185 on 10.1.0.181?
Click to expand...
Click to collapse
You can`t install 10.0.x.x over the 10.1.x.x.
On the first step you have to downgrade to 10.0.0.175 via HiSuite, then you will be able to flash the 10.0.0.185, using this method ("HOW TO flash dload FW: ... UPGRADE USING OTG ADAPTER or OTG CABLE + USB MEMORY STICK")

rm001 said:
You can`t install 10.0.x.x over the 10.1.x.x.
On the first step you have to downgrade to 10.0.0.175 via HiSuite, then you will be able to flash the 10.0.0.185, using this method ("HOW TO flash dload FW: ...")
Click to expand...
Click to collapse
Thnks brother..

I roaled back to 10.0.0.186 The quality at day light fotos is huge.. Now I'm searching to download on
10.0.0.185 and I can't find it anywhere for p30 pro vog l29 c431... Europe isn't available on pc suite too
If anyone can help I will appreciated

bricked p40 pro c636

any one can post preload and cust file for p40 pro c636 regions, i can find any on the internet.
or anyone can help me unbricked my phone
thank you

kellogsvibrant said:
any one can post preload and cust file for p40 pro c636 regions, i can find any on the internet.
or anyone can help me unbricked my phone
thank you
Click to expand...
Click to collapse
It is better to provide the all story and many, many details. From what EMUI version was on the phone, what methods you used till the current situation. There are so many variables.

sorry, im was on emui 12, then i really need gms to work, reverted back to emui 10, and iupdated to emui 12 using flashdrive trick, i DL wrong firmwaree i guess, then it got bricked stuck on erecovery mode. after i flashed using usb

kellogsvibrant said:
sorry, im was on emui 12, then i really need gms to work, reverted back to emui 10, and iupdated to emui 12 using flashdrive trick, i DL wrong firmwaree i guess, then it got bricked stuck on erecovery mode. after i flashed using usb
Click to expand...
Click to collapse
Write for every step what firmware, files have been used.

I updated my huawei to beta emui12, i got in ang got the OTA for emui 12, but i really need GMS now, then i used hisuite proxy downgraded my p40 pro to emui 10, but cant remmeber exact number, it was success then my pc wont detect my huawei, lastly i tries using the usb otg OTA update. the after restart i get this error

any one can link me full firmware files for this region , il gladly appriciate.

kellogsvibrant said:
any one can link me full firmware files for this region , il gladly appriciate.
Click to expand...
Click to collapse
It is not so easy as you think it is.

In my opinion it is better to go to the service.
It is a slightly chance to fix with HarmonyTP cable + HiSuite Proxy (Recovery OS).
Looking at your questions and answers, you have no idea about how the things works with this phone.
You can try to ask here too:
HISuite Proxy ( Huawei Phones' Updater & Soft-Brick Fixer )
Introduction Simply this application reverse engineers ( modifies ) HISuite, to be able to manipulate its Huawei servers' response data for installing official roms of Huawei, customarily. Features Support for OTA ROMs Support for FullOTA ROMs...
forum.xda-developers.com
or on telegram group here:
Huawei Firm Finder / HiSuite Proxy Support
https://professorjtj.github.io
t.me