Database Develop

Meet OREO for WAS-AL/TL

Good news for chinese firmware

rambik33 said:
Good news for chinese firmware
Click to expand...
Click to collapse
Hello
I took my p9 lite vns-l31c432. OK
I made it go to was-al00c00b240. OK
i reflected huawei's recovery.img stock and i closed the bootloader.
it works properly.
NOW.
I tested ota update with the phone, does not work.
I tested finder does not work.
i tested huawei updater v2.0, does not work.
I tested update on the pc with hisuite, does not work.
I can not register for the beta, I do not have a Chinese phone number, I am in France.
And
of course dload method, sofware install failed!
do you have an idea to try to start it?

Sim is not work?

rambik33 said:
Sim is not work?
Click to expand...
Click to collapse
Yes work

What the ota you try install?

We cant install it right ?

kisvagen said:
We cant install it right ?
Click to expand...
Click to collapse
Yes
Need wait few weeks)

Okay mate thanks for the info my model is : was lx1c432 . Dual sim . Hope the oreo will be better than nougat xd

Chisetdel31260 said:
Hello
I took my p9 lite vns-l31c432. OK
I made it go to was-al00c00b240. OK
i reflected huawei's recovery.img stock and i closed the bootloader.
it works properly.
NOW.
I tested ota update with the phone, does not work.
I tested finder does not work.
i tested huawei updater v2.0, does not work.
I tested update on the pc with hisuite, does not work.
I can not register for the beta, I do not have a Chinese phone number, I am in France.
And
of course dload method, sofware install failed!
do you have an idea to try to start it?
Click to expand...
Click to collapse
Nice try man! Ok, did you try to update b311 using ffinder, or just with beta program? Now, I see that they remove beta b311 from ffinder...
Also, just keep it in mind that Emui 8 change some partitions including recovery sectors. So, we dont have Twrp for emui 8 for our models, and its big posibillity to stuck on some beta emui 8 lets say Al00C00 without any chance to rollback to Emui 5 and destroy partitions, brick your phone trying that. Just wait for custom recovery for Emui 8 for Kirin 658, after that u can do some experiments ?
Regards.

Alexxxx1 said:
Nice try man! Ok, did you try to update b311 using ffinder, or just with beta program? Now, I see that they remove beta b311 from ffinder...
Also, just keep it in mind that Emui 8 change some partitions including recovery sectors. So, we dont have Twrp for emui 8 for our models, and its big posibillity to stuck on some beta emui 8 lets say Al00C00 without any chance to rollback to Emui 5 and destroy partitions, brick your phone trying that. Just wait for custom recovery for Emui 8 for Kirin 658, after that u can do some experiments
Regards.
Click to expand...
Click to collapse
new tests.
Too bad, I tried DC-Phoenix V50 with 15 credits.
to install b331-log, after having restarted the installation 4 or 5 times, he finished installing it completely. I wonder how dc-phoenix can create a new partition.
and that on xda, there is no dev that could create an equivallent toolkit.
But, the p9 lite remains on a black screen, the volume and power buttons do not respond anymore.
no led lights up. But it still remains recognized in fastboot mode.
so, I can always go back to a clean device.

P20 Pro CLT-L09 (SP6C900) update?

Hi all, I'm at my wit's end and would really appreciate any advice.
So I have the p20 pro variant in the title, it's still on EMUI 8.1 and has a lot of bugs. Hicare can't find an update, neither can hisuite.
I tried FF and downloaded a Full-OTA update that was approved for my IMEI. I tried flashing it via Dload method but it reboots to the recovery and says software update failed.
Using the erecovery method with DNS change also does not work as it has some error parsing the update.
The phone works fine otherwise but all these small software niggles are getting to me.
Anyone have any suggestions on how to update this phone to EMUI 9.1? It is not bootloader unlocked.
Thank you for reading this far.

Have you already tried the modified version of hisuite?

Macmoc16 said:
Have you already tried the modified version of hisuite?
Click to expand...
Click to collapse
I have not! Looks like my googlefu is weaker than I thought. Looking into it now and will report back if it works.

So I tried the modified HiSuite method with HStool but I get the error "Your device is not supported". I don't really know where to go from here.

Huawei P40 pro+ Reboot only

hello,
To install the GMS on my p40 pro +, I tried the downgrade method with Hi-Suite proxy and Hi-suite 10.0.0.510.
I just tried to downgrade my p40 pro + from 10.1.0.156 (c432) to 10.1.0.131 (C432).
Now my phone constantly reboots.
I manage to switch to Recovery but he gives me the message : Get package info failed.
I don't see how to charge my smartphone even if it is with the latest EMUI version.
please help. thank you

try with 10.1.0.144, this should work with p40 pro +

Tunn3l said:
try with 10.1.0.144, this should work with p40 pro +
Click to expand...
Click to collapse
how do you install it without access to HSuite ?
I have the same problem, I can only access to
- Update and recovery system ( got the same error than him )
- Usb update option, don't know how to continue with that.
- Fastboot, but I can also not do much since is "locked"
Thanks for the help!

https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/System-Recovery-Rom-Instruction-(-Soft-Bricked-)

Same problem
joe.cocs said:
hello,
To install the GMS on my p40 pro +, I tried the downgrade method with Hi-Suite proxy and Hi-suite 10.0.0.510.
I just tried to downgrade my p40 pro + from 10.1.0.156 (c432) to 10.1.0.131 (C432).
Now my phone constantly reboots.
I manage to switch to Recovery but he gives me the message : Get package info failed.
I don't see how to charge my smartphone even if it is with the latest EMUI version.
please help. thank you
Click to expand...
Click to collapse
Dear We have the same problem, please help as it reboot we cant flash with Hisutie.... thanks

10.1.0.156 (c432) not suported. Flash this Rom with HiSuite Proxy?

Manuela.k said:
10.1.0.156 (c432) not suported. Flash this Rom with HiSuite Proxy?
Click to expand...
Click to collapse
Thanks but the phone will reboot before Hisuite proxy finishing download so cut the connection...:crying:

Test it with this version of HiSuite

Manuela.k said:
Test it with this version of HiSuite
Click to expand...
Click to collapse
Thanks also 550 510 we try both of them but as it will reboot we cant finish flash

xmarketx said:
Thanks also 550 510 we try both of them but as it will reboot we cant finish flash
Click to expand...
Click to collapse
I have the same issue. Please help :crying: I and desperate what to do or try.

Have you found a solution?

Hello,
ifound a solution
I have a P40 pro Plus with the buid 10.1.0.156 (C432E2R3P3).
I used the following method to downgrade to version 10.1.0.132 :
https://www.youtube.com/watch?v=q2b_lBPc-Hk
and for install GMS:
https://www.youtube.com/watch?v=2Lcq...ature=youtu.be
The only downside is that it is not possible to update the version afterwards, but it works while waiting for a possible commercial release from the USA.

P40 pro 10.1.0.158 (636E8R4P1) how to downgrade
What method should I use to downgrade? Hisuite
Can't help me downgrade.
Cell phones don't have GMS just like they're gone.

accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????

we messed with our motherboard by installing wrong OS via Hisuit proxy ...
only solution is to take your mobile to Huawei Service center for mainboard replacement.. it will be free under warranty

Sorry to say but You have to go to Huawei service center and they need to replace the moterboard , this is the only way to get phone working. If You flashed wrong firmware you damaged IMEI and security certificates so no way that flashing good firmware will work now .

I had the same problem. No IMEI and constant reboots. I have sent the phone to Huawei for repair and they said they have to replace the main board. Yesterday I contacted the guy from the first reply in this thread https://forum.xda-developers.com/t/huawei-p40-pro-soft-brick-reboot-only.4166553/
He really managed to repair the phone and it is working normally now. It took about 2 hours and he charged 40usd. So I can definetly recommend him as I would have to throw away the phone otherwise.

Huawei P40 Pro Plus ROM files

So I got a Huawei P40 Pro Plus and I used by mistake my software files for P40 Pro. The Pro+ is now stuck and restarts every 2~3 minutes so I don't have enough time to download another version and repair it. I tried with system recovery on HiSuite as suggested in another thread but to no success. I wanted to ask if anyone knows where I can get the Huawei P40 Pro Plus stock firmware (ROM) so that I can flash it. All the ones I find don't have a dload file directory and are missing the SYSTEM.img file (instead there is this weird SUPER.img file).
Thank you in advance

I have the same problem, only on the contrary, I installed firmware from P40 Pro + on my P40 Pro. I am also looking for a solution to the problem, but unsuccessfully so far.
---------- Post added at 08:53 PM ---------- Previous post was at 08:44 PM ----------
Ashacreed said:
So I got a Huawei P40 Pro Plus and I used by mistake my software files for P40 Pro. The Pro+ is now stuck and restarts every 2~3 minutes so I don't have enough time to download another version and repair it. I tried with system recovery on HiSuite as suggested in another thread but to no success. I wanted to ask if anyone knows where I can get the Huawei P40 Pro Plus stock firmware (ROM) so that I can flash it. All the ones I find don't have a dload file directory and are missing the SYSTEM.img file (instead there is this weird SUPER.img file).
Thank you in advance
Click to expand...
Click to collapse
Try to restore via FASTBOOT according to this instruction: https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/System-Recovery-Rom-Instruction-(-Soft-Bricked-)
only you need the correct cust and preload files for your region.

Did the method work for anyone as I am facing the similar behavior

loser said:
Did the method work for anyone as I am facing the similar behavior
Click to expand...
Click to collapse
it worked for the person who posted it but not for me sadly. I bought the MRT software key and it just arrived seconds ago and I will try to repair it today or tomorrow. I wish you luck my dude sadly I don't know how to help. Can you amybe give more information

Would be interesting to know what exactly was done - I am struggling to get the firmware files placed on the right directory for Hisuite to detect and repair the phone . It keeps indicating firmware package files are missing .The background is I went from 1.56 to 1.31 and it has been a constant boot loop since then . Very expensive paperweight at the moment ,

loser said:
Would be interesting to know what exactly was done - I am struggling to get the firmware files placed on the right directory for Hisuite to detect and repair the phone . It keeps indicating firmware package files are missing .The background is I went from 1.56 to 1.31 and it has been a constant boot loop since then . Very expensive paperweight at the moment ,
Click to expand...
Click to collapse
You may be substituting invalid links in hisuite.proxy

You might be right . This is what I followed >
1. Prerequisites- OK
2.Full OTA -Installation Instructions :
You need to find the matching firmwares and link to them in the application.
The above is where I am stuck - how to link and what does ut even mean . I have got the firmware files downloaded , seems like the locked bootloader does not allow to go forward .
Any ideas ?

KINGZ_ said:
You may be substituting invalid links in hisuite.proxy
Click to expand...
Click to collapse
Remember-I am in a bootloop, cannot use hisuite proxy. I have actually downgraded using Hisuite Proxy so that works just fine .
Did you have any luck with the MRTKey >?
---------- Post added at 11:03 AM ---------- Previous post was at 10:27 AM ----------
Ashacreed said:
it worked for the person who posted it but not for me sadly. I bought the MRT software key and it just arrived seconds ago and I will try to repair it today or tomorrow. I wish you luck my dude sadly I don't know how to help. Can you amybe give more information
Click to expand...
Click to collapse
Could you advise what was done ?

Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.

loser said:
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
Click to expand...
Click to collapse
You will need to find out using fastboot which version is current on your device, and then use the dload firmware for your region.
To find out how to get the latest firmware information, check Fastboot for the OEM information. PLEASE see post #253 for instructions if needed. Then follow the instructions for recovery via fastboot.

(bootloader) :ELS-N39 10.1.0.157(C185E2R1P1)
OKAY [ 0.004s]
finished. total time: 0.005s
ELS-LGRP4-OVS 10.1.0.157
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)
Tried with C185 firmware - recovery fails at 89%. Then the same bootloop continues with the above version ( moved up from the problematic 1.31. Now trying with 1.62 which is an approved firmware .Fingers crossed.

loser said:
ELS-LGRP4-OVS 10.1.0.157
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)
Click to expand...
Click to collapse
yes, only if you have p40 pro +, you need a firmware database for p40 +. in my opinion for p40 + this is ELS-LGRP6-OVS
and I can't tell you exactly which PRELOAD file is right for you as there are four of them.
if you just have p40 pro, then cust & preload look for ELS-N29 and firmware ELS-LGRP4-OVS base.

loser said:
Remember-I am in a bootloop, cannot use hisuite proxy. I have actually downgraded using Hisuite Proxy so that works just fine .
Did you have any luck with the MRTKey >?
---------- Post added at 11:03 AM ---------- Previous post was at 10:27 AM ----------
Could you advise what was done ?
Click to expand...
Click to collapse
So far I have tried the MRT Key but it gives me failure when trying to establish a USB connection while the phone is in Fastboot mode. I am trying to find how to fix it right now and I hope it will work. I have tried Hisuite proxy before with versions 156, 144 and 132 but nothing worked for me so I will keep trying with fastbooting and the Key. Sadly I cannot say if it will be successful and if you should buy it for yourself. I found a tutorial on YouTube how to use it but that failure mentioned earlier is in the way and the recovery never gets past 5%.

KINGZ_ said:
yes, only if you have p40 pro +, you need a firmware database for p40 +. in my opinion for p40 + this is ELS-LGRP6-OVS
and I can't tell you exactly which PRELOAD file is right for you as there are four of them.
if you just have p40 pro, then cust & preload look for ELS-N29 and firmware ELS-LGRP4-OVS base.
Click to expand...
Click to collapse
Well I was trying with LGRP4- all this while , which might have been the problem . Thanks for the great hint . Let me give LGRP6 a shot now .
---------- Post added at 06:08 AM ---------- Previous post was at 05:19 AM ----------
loser said:
Well I was trying with LGRP4- all this while , which might have been the problem . Thanks for the great hint . Let me give LGRP6 a shot now .
Click to expand...
Click to collapse
Bummer - Recovery failed at 5%, no change in status unfortunately . While the preload and the cust zips seem to have the region specific C185 tags , there seems to be no way to identify the main file belonging to the same region for making sure all 3 files are correct. Any ideas here ?

loser said:
Bummer - Recovery failed at 5%, no change in status unfortunately . While the preload and the cust zips seem to have the region specific C185 tags , there seems to be no way to identify the main file belonging to the same region for making sure all 3 files are correct. Any ideas here ?
Click to expand...
Click to collapse
Hi there,
Got your PM & read this thread to get more info about your problem.
You would need to use dload firmware for C185. Using other methods like HiSuite Proxy or HiSuite recovery won't help you at this point. Even eRecovery will get you ''Getting package info failled''!
{Mod edit: Link removed! - Oswald Boelcke, Moderator}
@Ashacreed, it seems that you got yourself a hardbricked device, because you've flashed a firmware from a diferent phone model, so in your case a new motherboard is required...
Kdrgs,
SilviuO

SilviuO said:
Hi there,
Got your PM & read this thread to get more info about your problem.
You would need to use dload firmware for C185. Using other methods like HiSuite Proxy or HiSuite recovery won't help you at this point. Even eRecovery will get you ''Getting package info failled''!
@Ashacreed, it seems that you got yourself a hardbricked device, because you've flashed a firmware from a diferent phone model, so in your case a new motherboard is required...
Kdrgs,
SilviuO
Click to expand...
Click to collapse
Dear SilviuO,
Thanks for getting back .
Nothing for C185 listed on easy-firmware , okay to flash with something else ? To be honest I made the most progress with Hisuite proxy method but unable to complete fully beyond 89% and the phone keeps in the bootloop every 1min 15 secs. Camera has become upside down and IMEI has become unknown .
I seem to have little hope .
Thoughts ?

loser said:
Dear SilviuO,
Thanks for getting back .
Nothing for C185 listed on easy-firmware , okay to flash with something else ? To be honest I made the most progress with Hisuite proxy method but unable to complete fully beyond 89% and the phone keeps in the bootloop every 1min 15 secs. Camera has become upside down and IMEI has become unknown .
I seem to have little hope .
Thoughts ?
Click to expand...
Click to collapse
You could try flashing other firmware (ex. for C605 or C432) using this method from my thread. You also need to rename those 2 zips (update_sd_cust&update_sd_preload) to match C185 dload firmware folder names . Be advised that this would be the first time someone tries the method explained on a P40 Pro / P40 Pro+ unit!
Cheers,
SilviuO

SilviuO said:
You could try flashing other firmware (ex. for C605 or C432) using this method from my thread. You also need to rename those 2 zips (update_sd_cust&update_sd_preload) to match C185 dload firmware folder names . Be advised that this would be the first time someone tries the method explained on a P40 Pro / P40 Pro+ unit!
Cheers,
SilviuO
Click to expand...
Click to collapse
Giving it a try as per your guide- wish me luck
---------- Post added at 09:44 AM ---------- Previous post was at 09:15 AM ----------
No luck -Software install failed , Incompatibility with current version . Please download the correct update package .

loser said:
Giving it a try as per your guide- wish me luck
---------- Post added at 09:44 AM ---------- Previous post was at 09:15 AM ----------
No luck -Software install failed , Incompatibility with current version . Please download the correct update package .
Click to expand...
Click to collapse
Guess that you will have to wait for a proper C185 dload firmware with a higher build number than the one you're currently on and try flashing again.
Kdrgs,
SilviuO

Version has upgraded to 1.62 but the issues are not resolved - because the flashing never completed fully looks like . The factor of the main file being not indicated as the main location based file marked for C185 region . I have got cust and preloaded files which C185 version , which seems to be not good enough . Interestingly wipe cache partition and factory reset do not seem to have any impact whatsoever on error , which I find strange based on my Android experience.
ELS-LGRP6-OVS 10.1.0.162
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)

Roalback

Hello everyone. I'm very disappointed at 10.1 update with camera results specially at nigh mode.. Yesterday night I roaled back to 10.0.0.175 version. I tested night mode on. Same scenario and there wasnt so much noise at 10.1 version... So I want to return at 10.0.0.185 or 180 update witch was best update for camera.. The problem is that version isn't available on huwawei pc suite.. I'm not rooted any solutions?
Thnk you all

step-by-step downgrade via HiSuite to 9.1.0.x and then step-by-step upgrade via OTA up to the necessary version of 10.0.x.x.

rm001 said:
step-by-step downgrade via HiSuite to 9.1.0.x and then step-by-step upgrade via OTA up to the necessary version of 10.0.x.x.
Click to expand...
Click to collapse
Hello brother, it can't be happen... Yesterday I roaled back to 10.0.0.175 phone jumped to 195 and then to 10.1.0.. 120 etc etc 10.1.0.181...Although I'm asking how I can update to 10.0.0.180-185

Noexcusses said:
Hello brother, it can't be happen... Yesterday I roaled back to 10.0.0.175 phone jumped to 195 and then to 10.1.0.. 120 etc etc 10.1.0.181...Although I'm asking how I can update to 10.0.0.180-185
Click to expand...
Click to collapse
Ok, but why you didn`t roll back from 10.0.0.175 down to 9.1.0.x? When you press "Upgrade" in the HiSuite, there is an option "Other versions", you choose it, and there is a possibility to downgrade the FW. You downgrade step-by-step to 9.1.0.x, then start to uograde to 10.0.x.x. and stop when you find the suitable FW.

rm001 said:
Ok, but why you didn`t roll back from 10.0.0.175 down to 9.1.0.x? When you press "Upgrade" in the HiSuite, there is an option "Other versions", you choose it, and there is a possibility to downgrade the FW. You downgrade step-by-step to 9.1.0.x, then start to uograde to 10.0.x.x. and stop when you find the suitable FW.
Click to expand...
Click to collapse
Because I thought I was already fine on 10.0.0.175 to update on 10.0.0.185.. What was my mistake?

In this case, I do not know, maybe now the upgrade plan is different from the previous one, maybe they have now excluded some intermediate versions of FW ...

rm001 said:
In this case, I do not know, maybe now the upgrade plan is different from the previous one, maybe they have now excluded some intermediate versions of FW ...
Click to expand...
Click to collapse
Yeah... Sad...

rm001 said:
In this case, I do not know, maybe now the upgrade plan is different from the previous one, maybe they have now excluded some intermediate versions of FW ...
Click to expand...
Click to collapse
Download: Firmware 10.0.0.186 Android 10 - Huawei P30 Pro - VOG-L29 [Europe] - Carbon Tesla Downloads
Download the full 10.0.0.186 firmware update for Huawei P30 Pro (VOG-L29) devices in Europe via the direct link provided below. This update is based on Android 10 with EMUI 10 on top. Package Details ShareTweetShareShare0 Shares
huaweidl.com
Do you know if I need unlocked bootloader to install this firmware? Thnks

Noexcusses said:
Download: Firmware 10.0.0.186 Android 10 - Huawei P30 Pro - VOG-L29 [Europe] - Carbon Tesla Downloads
Download the full 10.0.0.186 firmware update for Huawei P30 Pro (VOG-L29) devices in Europe via the direct link provided below. This update is based on Android 10 with EMUI 10 on top. Package Details ShareTweetShareShare0 Shares
huaweidl.com
Do you know if I need unlocked bootloader to install this firmware? Thnks
Click to expand...
Click to collapse
you can install it with locked bootloader. But after installation it will cause a hard reset and delete all information even in user part of memory. Backup your files.

rm001 said:
you can install it with locked bootloader. But after installation it will cause a hard reset and delete all information even in user part of memory. Backup your files.
Click to expand...
Click to collapse
I have no prob with reset. Just tell me this. Should roalback to 10.0.0.175 first and then update to 10.0.0.185 or just install 10.0.0.185 on 10.1.0.181?

Noexcusses said:
I have no prob with reset. Just tell me this. Should roalback to 10.0.0.175 first and then update to 10.0.0.185 or just install 10.0.0.185 on 10.1.0.181?
Click to expand...
Click to collapse
You can`t install 10.0.x.x over the 10.1.x.x.
On the first step you have to downgrade to 10.0.0.175 via HiSuite, then you will be able to flash the 10.0.0.185, using this method ("HOW TO flash dload FW: ... UPGRADE USING OTG ADAPTER or OTG CABLE + USB MEMORY STICK")

rm001 said:
You can`t install 10.0.x.x over the 10.1.x.x.
On the first step you have to downgrade to 10.0.0.175 via HiSuite, then you will be able to flash the 10.0.0.185, using this method ("HOW TO flash dload FW: ...")
Click to expand...
Click to collapse
Thnks brother..

I roaled back to 10.0.0.186 The quality at day light fotos is huge.. Now I'm searching to download on
10.0.0.185 and I can't find it anywhere for p30 pro vog l29 c431... Europe isn't available on pc suite too
If anyone can help I will appreciated