Hello guys,
My Red Magic 3 is running on CN 3.29 and i have been received a new OTA update and no matter what, i cannot install it because of the root. My RN3 is equipped with TWRP recovery and magisk.
My Question is, Can i just download the ROM and just zip it through TWRP without any desktop help? Because I don't have pc. Any one who have tried this kind of method feel free to reply here. Will be so helpful. Thank youuu
yes you can.first flash rom and dont reboot go back flash twrp then boot twrp and flash magisk ..profit
What is RN3?
walkwitmeinhel said:
yes you can.first flash rom and dont reboot go back flash twrp then boot twrp and flash magisk ..profit
Click to expand...
Click to collapse
How do you want me to flash rom through twrp or system update recovery.
Once installation done of rom, can we install magisk tht is in internal storage?
Can we install twrp from twrp????
Nightwish1976 said:
What is RN3?
Click to expand...
Click to collapse
I'm sorry, RM3* red magic 3
kiranaxel said:
How do you want me to flash rom through twrp or system update recovery.
Once installation done of rom, can we install magisk tht is in internal storage?
Can we install twrp from twrp????
Click to expand...
Click to collapse
i already share working twrp for A10 yes flash rom from twrp dont reboot go back flash twrp.img and reboot to twrp and flash magisk
walkwitmeinhel said:
i already share working twrp for A10 yes flash rom from twrp dont reboot go back flash twrp.img and reboot to twrp and flash magisk
Click to expand...
Click to collapse
Any linkz to watch and do?
walkwitmeinhel said:
i already share working twrp for A10 yes flash rom from twrp dont reboot go back flash twrp.img and reboot to twrp and flash magisk
Click to expand...
Click to collapse
Thanks Buddy, it worked. And i had to reinstall gapps and magisk third time then gapps worked flawlessly.
Related
Folks,
Seeing alot of comments about bootloops, etc after trying to install the new stable OOS Oreo release.
I went through the same issue myself and found the following method to work best.
PLEASE NOTE: I'm not responsible if this does Any type of damage or issues to your device.
Be sure to backup all you need to back up to your PC.
1. Complete wipe of phone.
2. Flash the stock recovery that was used for reverting from Oreo Beta to Nougat. http://oxygenos.oneplus.net.s3.amazonaws.com/OP5_recovery.img
3. Wipe everything again.
4. Sideload new Oreo release. (Credit @HatRiGt, https://drive.google.com/open?id=1NW5zyUOL6bWgUWozFGLiutzud203npKp)
5. Reboot to bootloader and flash the Chinese TWRP. https://drive.google.com/open?id=1AKbC4HB0h4rEldQUowWGdyM4iYBVV--7
6. Reboot to recovery and flash Magisk. I flashed the 14.6 version and haven't found any issues yet. (https://forum.xda-developers.com/attachment.php?attachmentid=4366826&d=1513897917)
7. Boot phone.
I cannot promise this will work for you, but it has done the job for me.
Running Oreo Stable with Magisk 14.6 and restored all apps from Titanium Backup that I saved on my PC.
I highly suggest blu_spark TWRP instead of chinese one, and i think this method is ONE of the other working way
Couldn't get mine to work with blu spark, hence why I had to use chinese
Link for Chinese twrp please
Thank you very much, work for me
Make a video of it please
New Magisk v.15.
Thanks to topjohnwu.
joecaesar said:
Link for Chinese twrp please
Click to expand...
Click to collapse
Added to OP.
All is well. And with google Drive almost all data is back.
Nice & easy workaround..
Step 5 has to be : install TWRP on fastboot mode...
@hallo dare
Any chance you can make a very detailed video about this process?
cultofluna said:
Nice & easy workaround..
Step 5 has to be : install TWRP on fastboot mode...
Click to expand...
Click to collapse
Yes, sorry. Amended text now.
lvints said:
@hallo dare
Any chance you can make a very detailed video about this process?
Click to expand...
Click to collapse
No real need for a video mate, just follow the post step by step and you're golden!
I can not sideload Oreo zip, it says can not read
Lvsitano said:
I can not sideload Oreo zip, it says can not read
Click to expand...
Click to collapse
You should try changing the TWRP
If you have problems with adb sideload:
Boot into fastboot and install stock .
Unlock/Lock your Phone and unlock it again. Locking will wipe the whole phone.
After this you can make a clean installation.
Reboot to bootloader and flash the Chinese TWRP and boot to Recovery.
Install the oreo.zip file.
Reboot to System.
Make your Setup: WLAN, GMail Account aso.....
After all boot to Recovery and install Magisk
Very easy, put oreo zip file in the root folder, backup all data, flash stock recovery, boot with stock recovery, wipe cache, upgrade internal..., Select oreo zip file and flash it, then back and select wipe, select erase every thing and reboot. Done.
Thank you so much! I finally got it working. I needed to do a factory wipe and skip the magisk installation but it worked!
Cheers!
nikoeuren said:
Thank you so much! I finally got it working. I needed to do a factory wipe and skip the magisk installation but it worked!
Cheers!
Click to expand...
Click to collapse
Magisk won't flash on stock recovery, if that's the reason you had to skip installing it.
hallo dare said:
Magisk won't flash on stock recovery, if that's the reason you had to skip installing it.
Click to expand...
Click to collapse
No I installed the TWRP and flashed magisk. It refused to boot so I factory swiped it and all was good. Now I have to figure out how to install magisk without getting into bootloop.
Sent from my ONEPLUS A5000 using Tapatalk
Hi Guys,
May I know what are the steps to flash the rom and also magisk properly? Cuz I have a brand new mi 9 now...
1. unlocked bootloader
2. flash twrp (is the one below recommended?)
https://forum.xda-developers.com/Mi-9/development/recovery-twrp-3-3-1-siankatabg-t3934962
3. I am actually confused about the decryption thing, do I still need to wipe data first?
4. wipe system, wipe data (?), flash eu or ROS rom, flash gapps, flash magisk, reboot?
Thank you guys for helping me
You could easily test it. If you are on stock rom and flashed twrp you should see all your data. If you can, you don't need to format data.
Kollachi said:
You could easily test it. If you are on stock rom and flashed twrp you should see all your data. If you can, you don't need to format data.
Click to expand...
Click to collapse
which twrp would you recommend for flashing ROS??
damnthomas said:
which twrp would you recommend for flashing ROS??
Click to expand...
Click to collapse
Siankatabg's version or latest version by mauronofrio.
Kollachi said:
Siankatabg's version or latest version by mauronofrio.
Click to expand...
Click to collapse
thanks!
so after i flashed the twrp, i need to wipe /system, /data, /cache, /davik-cache before flashing the ROS?
then after flashing the ROS, i need to reboot into the system first, and then go back to the twrp to flash magisk?
damnthomas said:
thanks!
so after i flashed the twrp, i need to wipe /system, /data, /cache, /davik-cache before flashing the ROS?
then after flashing the ROS, i need to reboot into the system first, and then go back to the twrp to flash magisk?
Click to expand...
Click to collapse
Yes wipe your device and flash Ros and flash twrp.
Reboot directly into recovery and flash magisk.
Reboot and it should be fine.:good:
Kollachi said:
Yes wipe your device and flash Ros and flash twrp.
Reboot directly into recovery and flash magisk.
Reboot and it should be fine.:good:
Click to expand...
Click to collapse
thanks for your reply!
you mean i need to flash the twrp again after flashing ROS or eu rom or global rom
and then i need to boot into the system first or directly flash the magisk?
damnthomas said:
thanks for your reply!
you mean i need to flash the twrp again after flashing ROS or eu rom or global rom
and then i need to boot into the system first or directly flash the magisk?
Click to expand...
Click to collapse
I did: flash rom, flash recovery, directly reboot into recovery and flash magisk. After that I rebooted to system.
Kollachi said:
I did: flash rom, flash recovery, directly reboot into recovery and flash magisk. After that I rebooted to system.
Click to expand...
Click to collapse
ok! thanks!
so which twrp u r using right now? if i want to flash global rom, just pick either one twrp is fine?
I'm playing with both twrps. Mauronofrio and siankatabg. It's almost the same. Should work both great.
Kollachi said:
I'm playing with both twrps. Mauronofrio and siankatabg. It's almost the same. Should work both great.
Click to expand...
Click to collapse
Thanks man!
Will try to flash it after ~14x hours for unlocking the bootloader
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Akash731 said:
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Click to expand...
Click to collapse
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Akash731 said:
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Click to expand...
Click to collapse
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
pradeeppk said:
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
Click to expand...
Click to collapse
I don't want to try custom rom's as this is my main device guess I'm stuck with the encryption then thanks for your help. :good:
Edit:-
Tried TWRP r20 it decrypts fine thanks
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
gewe said:
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
Click to expand...
Click to collapse
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
I am using stock ROM, and yes, also Magisk (installed later). IIRC Magisk is not needed for TWRP to work. When I receive the next OTA notification, I will test this.
The thread you are referring to is for a OnePlus 3T. For our device this is the thread: https://forum.xda-developers.com/moto-g5s-plus/development/recovery-twrp-3-1-1-r7-t3694910.
Since there is no official TWRP for the Moto G5S Plus, I took the following text from the TWRP page for the Moto G5S.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Instead of that you can also use fastboot reboot-bootloader, and then from the bootloader start recovery.
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
gewe said:
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
Click to expand...
Click to collapse
As like you said this is the first time in my life i need to flash magisk to stick twrp.
I usualy doesn't use root or custom roms, install twrp, remove unnecessary apps from stock system, replace host files with adaway hosts, replace or edit gps config files. and continue using stock.
This is the main routine from Android 1.5
(Samsung spica (i think it was the first Android phone from Samsung)).
It may be due to security reason stock kernel or system delete twrp.
When installing magisk it patch stock boot image, that may be the reason of twrp remains after flashing magisk.
Hi!
After flashing the One UI Beta to your S9/S9+ you can flash the latest TWRP on the same way through Odin jow you did it on Android Pie.
After flashing TWRP you need to wipe data.
Next step is to flash the latest magisk zip 20.1.
Than you have to flash the zip from here. This will modify the TWRP and make it fully working.
No more bootloop after flashing TWRP.
All credits goes to @Alucard for this great tweak.
g960u/u1?
rianplas said:
g960u/u1?
Click to expand...
Click to collapse
No idea on snapdragon.
Its for exynos.
Oel said:
Hi!
After flashing the One UI Beta to your S9/S9+ you can flash the latest TWRP on the same way through Odin jow you did it on Android Pie.
After flashing TWRP you need to wipe data.
Next step is to flash the latest magisk zip 20.1.
Than you have to flash the zip from here. This will modify the TWRP and make it fully working.
No more bootloop after flashing TWRP.
All credits goes to @Alucard for this great tweak.
Click to expand...
Click to collapse
After flashing the One UI Beta need waiting 7 days to enable oem unlock?
andylitias said:
After flashing the One UI Beta need waiting 7 days to enable oem unlock?
Click to expand...
Click to collapse
No problem.here
I had the OEM unlock before i changed to One Beta
Oel said:
No problem.here
I had the OEM unlock before i changed to One Beta
Click to expand...
Click to collapse
already flash zip and got error failed to unmount odm
and bootloop
andylitias said:
already flash zip and got error failed to unmount odm
and bootloop
Click to expand...
Click to collapse
The odm thing is not important.
Wich unit and wich steps you are going?
You deleted data first, than flashing magisk and after this the alucard2 zip?
Oel said:
The odm thing is not important.
Wich unit and wich steps you are going?
You deleted data first, than flashing magisk and after this the alucard2 zip?
Click to expand...
Click to collapse
G960F
already in one ui beta 2 android 10
flash twrp
format data
flash magisk 20.1 and flash alucard
still bootloop
andylitias said:
G960F
already in one ui beta 2 android 10
flash twrp
format data
flash magisk 20.1 and flash alucard
still bootloop
Click to expand...
Click to collapse
Ok, did you try to do download the zip again?
Please try this and flash again.
Wich version of twrp you are on?
Oel said:
Ok, did you try to do download the zip again?
Please try this and flash again.
Wich version of twrp you are on?
Click to expand...
Click to collapse
twrp-3.3.1-0
already download zip and flash again but still bootloop
andylitias said:
twrp-3.3.1-0
already download zip and flash again but still bootloop
Click to expand...
Click to collapse
Please try this older version. It works both on my G960F
twrp-3.3.1-0
already in beta 2android 10
flash twrp
format data
flash magisk 20.1
flash zip
And bootloop from Samsung logo
---------- Post added at 11:48 PM ---------- Previous post was at 11:30 PM ----------
Oel said:
Please try this older version. It works both on my G960F
Click to expand...
Click to collapse
Nope
This is the magisk patched kernel for the 960 Beta.
Flash it through twrp in "boot".
Flash the zip again and boot.
If it doesnt work than go back to twrp and flash the magisk uninstaller zip, than the patched kernel and it should boot.
IMPORTANT!
THE FIRST BOOT AFTER THE MILTI DISABLE ZIP NEEDS BETWEEN 3 TO 5 MINUTES!
https://we.tl/t-mB2vCFl51O
Yes, it works now!
RpRAUC said:
Yes, it works now!
Click to expand...
Click to collapse
method?
andylitias said:
twrp-3.3.1-0
already download zip and flash again but still bootloop
Click to expand...
Click to collapse
RpRAUC said:
Yes, it works now!
Click to expand...
Click to collapse
Great to hear!
What was the problem?
The long time on the first boot?
Oel said:
Great to hear!
What was the problem?
The long time on the first boot?
Click to expand...
Click to collapse
I will try tomorrow
already back to pie again
Thanks
andylitias said:
method?
Click to expand...
Click to collapse
This is the magisk patched kernel for the 960 Beta.
Flash it through twrp in "boot".
Flash the zip again and boot.
This metod works fo me
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Oel said:
Great to hear!
What was the problem?
The long time on the first boot?
Click to expand...
Click to collapse
2-3 min, then setup menu (account etc)
[email protected] and v2 doesn work,
I don't understand why
Here a better description wich steps you have to go:
Here is a instruction how to install OneUI beta with TWRP and root.
Flash Stock Rom CSK1 (XEU)
Let it boot (Welcome screen)
Flash update.zip (via abd or sd card)
Let it boot (welcome screen)
Flash twrp.tar
Boot in twrp
Format data
Reboot in recovery
Flash multi.disable.samsung
Reboot
Finish setup
Reboot twrp
Flash magisk
Reboot
Install magisk manager apk
Open magisk
Install the update (it ask you when you open magisk manager)
Let it reboot
Finish
Thanks to LONEsnoWolf
RpRAUC said:
2-3 min, then setup menu (account etc)
[email protected] and v2 doesn work,
I don't understand why
Click to expand...
Click to collapse
smartlock working?
cant add google account?
I need help, i don´t know compilated the Magisk from Github, when flash source.zip, have a brick in the smartphone...
Anyonelse have the Magisk 25.1. zip for flash?
Sorry my english is very bad
1)unlock the bootloader or unbrick the phone and backup the data cause it will be lost
2)Download the Magisk-v25.1.apk not zip.
3)then open file manager and rename the Magisk-v25.1.apk to
Magisk-v25.1.zip.
4)boot to fastboot and flash twrp recovery img misc and vbmeta and boot to twrp.
5)then flash Magisk-v25.1.zip. and you are good to go
JuanitoDog said:
I need help, i don´t know compilated the Magisk from Github, when flash source.zip, have a brick in the smartphone...
Anyonelse have the Magisk 25.1. zip for flash?
Sorry my english is very bad
Click to expand...
Click to collapse
omg!
Raghaov said:
1)unlock the bootloader or unbrick the phone and backup the data cause it will be lost
2)Download the Magisk-v25.1.apk not zip.
3)then open file manager and rename the Magisk-v25.1.apk to
Magisk-v25.1.zip.
4)boot to fastboot and flash twrp recovery img misc and vbmeta and boot to twrp.
5)then flash Magisk-v25.1.zip. and you are good to go
Click to expand...
Click to collapse
Yes i have bootloader unlocked and last recovery Pich
black.
I try your intruccions, Thanks
Yes man you are the ****ing best of the world greatings four you forever come on!
is your device working fine now
This also happened to my redmi note 8 it soft bricked my device while attempting to flash magisk 25.1, . So I followed this thread and go back to version 24
https://forum.xda-developers.com/t/fix-for-the-system-has-been-destroyed-redmi-note-8-8t.4089955/