Hi Guys,
May I know what are the steps to flash the rom and also magisk properly? Cuz I have a brand new mi 9 now...
1. unlocked bootloader
2. flash twrp (is the one below recommended?)
https://forum.xda-developers.com/Mi-9/development/recovery-twrp-3-3-1-siankatabg-t3934962
3. I am actually confused about the decryption thing, do I still need to wipe data first?
4. wipe system, wipe data (?), flash eu or ROS rom, flash gapps, flash magisk, reboot?
Thank you guys for helping me
You could easily test it. If you are on stock rom and flashed twrp you should see all your data. If you can, you don't need to format data.
Kollachi said:
You could easily test it. If you are on stock rom and flashed twrp you should see all your data. If you can, you don't need to format data.
Click to expand...
Click to collapse
which twrp would you recommend for flashing ROS??
damnthomas said:
which twrp would you recommend for flashing ROS??
Click to expand...
Click to collapse
Siankatabg's version or latest version by mauronofrio.
Kollachi said:
Siankatabg's version or latest version by mauronofrio.
Click to expand...
Click to collapse
thanks!
so after i flashed the twrp, i need to wipe /system, /data, /cache, /davik-cache before flashing the ROS?
then after flashing the ROS, i need to reboot into the system first, and then go back to the twrp to flash magisk?
damnthomas said:
thanks!
so after i flashed the twrp, i need to wipe /system, /data, /cache, /davik-cache before flashing the ROS?
then after flashing the ROS, i need to reboot into the system first, and then go back to the twrp to flash magisk?
Click to expand...
Click to collapse
Yes wipe your device and flash Ros and flash twrp.
Reboot directly into recovery and flash magisk.
Reboot and it should be fine.:good:
Kollachi said:
Yes wipe your device and flash Ros and flash twrp.
Reboot directly into recovery and flash magisk.
Reboot and it should be fine.:good:
Click to expand...
Click to collapse
thanks for your reply!
you mean i need to flash the twrp again after flashing ROS or eu rom or global rom
and then i need to boot into the system first or directly flash the magisk?
damnthomas said:
thanks for your reply!
you mean i need to flash the twrp again after flashing ROS or eu rom or global rom
and then i need to boot into the system first or directly flash the magisk?
Click to expand...
Click to collapse
I did: flash rom, flash recovery, directly reboot into recovery and flash magisk. After that I rebooted to system.
Kollachi said:
I did: flash rom, flash recovery, directly reboot into recovery and flash magisk. After that I rebooted to system.
Click to expand...
Click to collapse
ok! thanks!
so which twrp u r using right now? if i want to flash global rom, just pick either one twrp is fine?
I'm playing with both twrps. Mauronofrio and siankatabg. It's almost the same. Should work both great.
Kollachi said:
I'm playing with both twrps. Mauronofrio and siankatabg. It's almost the same. Should work both great.
Click to expand...
Click to collapse
Thanks man!
Will try to flash it after ~14x hours for unlocking the bootloader
Related
I am in miui china letest stable 10.2.3.0. I want to go Eu letest beta 9.4.18. my bootloader is unlocked but no twrp installed. Now how can I go to eu beta without any problem? Which twrp should i use? Please tell me the steps. Thanks in advance
shaonirfan said:
I am in miui china letest stable 10.2.3.0. I want to go Eu letest beta 9.4.18. my bootloader is unlocked but no twrp installed. Now how can I go to eu beta without any problem? Which twrp should i use? Please tell me the steps. Thanks in advance
Click to expand...
Click to collapse
Everything is given there, just read and follow install instructions:
https://xiaomi.eu/community/threads/9-4-18.50189/
Get TWRP 1102 or 1217 to flash the EU rom and install 1227 version once new rom is flashed but before reboot system.
That means when eu rom installation will finish, then I should reboot to fastboot instead of reboot to system? And then again flash twrp 1227?
shaonirfan said:
That means when eu rom installation will finish, then I should reboot to fastboot instead of reboot to system? And then again flash twrp 1227?
Click to expand...
Click to collapse
Simply said:
For WEEKLY EU DEV rom installed with1102/1217 twrp:
if you reboot to system the rom will install well but you loose TWRP 1102/1217. AND you will not be able to reflash the new one because partition are modified with this new rom version ''(from 2018/12/27).
That' why you must install 1227 before rebooting in the rom system.
Either with fastboot or in recovery you are still in... install 1227 image.
take a coffee!
EDIT: THIS IS ONLY IF YOU INSTALL WEEKLY EU DEV ROM!
for stable you MUST keep 1102 and you can reboot dry.
8.7.12
U have to flaah 8.7.12 then update it
Thank me later
rodra_mishu said:
U have to flaah 8.7.12 then update it
Thank me later
Click to expand...
Click to collapse
Read deeply, he said is hasn't any TWRP installed!
you only throw to words, explain it better, please!
lolo9393 said:
Simply said:
For WEEKLY EU DEV rom installed with1102/1217 twrp:
if you reboot to system the rom will install well but you loose TWRP 1102/1217. AND you will not be able to reflash the new one because partition are modified with this new rom version ''(from 2018/12/27).
That' why you must install 1227 before rebooting in the rom system.
Either with fastboot or in recovery you are still in... install 1227 image.
take a coffee!
EDIT: THIS IS ONLY IF YOU INSTALL WEEKLY EU DEV ROM!
for stable you MUST keep 1102 and you can reboot dry.
Click to expand...
Click to collapse
One is suggesting me to flash twrp 1227 and then flash eu 8.7.12. then update to latest eu rom. Is it ok? Will it make any problem flashing twrp 1227 in my latest Chinese stable?
shaonirfan said:
One is suggesting me to flash twrp 1227 and then flash eu 8.7.12. then update to latest eu rom. Is it ok? Will it make any problem flashing twrp 1227 in my latest Chinese stable?
Click to expand...
Click to collapse
-1227 TWRP will NEVER boot on ANY available STABLE ROM (CHINA or EU). Try it, no risk.
lolo9393 said:
-1227 TWRP will NEVER boot on ANY available STABLE ROM (CHINA or EU). Try it, no risk.
Click to expand...
Click to collapse
I have no experience about this flashing rom. I want to follow your procedure. But one confusion. When eu rom will successfully installed, then should I go to "reboot>reboot to bootloader" in twrp? And then flash twrp 1227 with the same process of installing twrp 1102/1217?
shaonirfan said:
I have no experience about this flashing rom. I want to follow your procedure. But one confusion. When eu rom will successfully installed, then should I go to "reboot>reboot to bootloader" in twrp? And then flash twrp 1227 with the same process of installing twrp 1102/1217?
Click to expand...
Click to collapse
you stay in TWRP and install "IMAGE" of 1227.
- INSTALL/ install image/find 1227.img file/select it and select RECOVERY position in order to place it well.
But if you don't do that and reboot the rom, no problem only TWRP will be missing.
---------- Post added at 07:11 AM ---------- Previous post was at 06:49 AM ----------
lolo9393 said:
you stay in TWRP and install "IMAGE" of 1227.
- INSTALL/ install image/find 1227.img file/select it and select RECOVERY position in order to place it well.
But if you don't do that and reboot the rom, no problem only TWRP will be missing.
Click to expand...
Click to collapse
QUESTION: I am lost with you.
-What the rom reference you are going to install?
lolo9393 said:
you stay in TWRP and install "IMAGE" of 1227.
- INSTALL/ install image/find 1227.img file/select it and select RECOVERY position in order to place it well.
But if you don't do that and reboot the rom, no problem only TWRP will be missing.
---------- Post added at 07:11 AM ---------- Previous post was at 06:49 AM ----------
QUESTION: I am lost with you.
-What the rom reference you are going to install?
Click to expand...
Click to collapse
Oh, that means, I can flash twrp 1227 from twrp 1102/1217 recovery? No need pc?
lolo9393 said:
you stay in TWRP and install "IMAGE" of 1227.
- INSTALL/ install image/find 1227.img file/select it and select RECOVERY position in order to place it well.
But if you don't do that and reboot the rom, no problem only TWRP will be missing.
---------- Post added at 07:11 AM ---------- Previous post was at 06:49 AM ----------
QUESTION: I am lost with you.
-What the rom reference you are going to install?
Click to expand...
Click to collapse
I am going to install eu latest dev rom from my Chinese latest stable rom
shaonirfan said:
I am going to install eu latest dev rom from my Chinese latest stable rom
Click to expand...
Click to collapse
OK!
TWRP 1102
FORMAT DATA /yes in WIPE
LOAD EU WEEKLY DEV ROM FLASH ZIP into phone memory
FLASH latest EU weekly DEV
INSTALL 1227 TWRP before reboot the rom. (for future install)
EDIT:
Format data coming from Official rom is mandatory because this rom is encrypted and it cannot be erased during flashing operation.
Save your data before doing format data!
lolo9393 said:
OK!
TWRP 1102
FORMAT DATA /yes in WIPE
LOAD EU WEEKLY DEV ROM FLASH ZIP into phone memory
FLASH latest EU weekly DEV
INSTALL 1227 TWRP before reboot the rom. (for future install)
EDIT:
Format data coming from Official rom is mandatory because this rom is encrypted and it cannot be erased during flashing operation.
Save your data before doing format data!
Click to expand...
Click to collapse
This was not my question. Please clear my confusion. Can I flash twrp 1227 with twrp recovery 1102? Or I should again flash 1227 with pc? If i should use pc, can I go to bootloader page to flash 1227? Or can I flash 1227 staying twrp recovery without rebooting bootloader?
EDIT: Oh sorry. I have understood. Thanks for your help.
I am getting tired of trying EU rom now. Everytime I tried, like whatever they said here and eu forum.. I always end up in stuck to fastboot mode.. Never boot the eu rom.
first flash 9.5.11 fastboot rom, then flast twrp v1102,
in twrp formate data and wiper systems and others,
flash eu rom from otg.
thats all.
ZoWapBoy said:
I am getting tired of trying EU rom now. Everytime I tried, like whatever they said here and eu forum.. I always end up in stuck to fastboot mode.. Never boot the eu rom.
Click to expand...
Click to collapse
Give this method a try. I followed these steps with the help of @lolo9393
Following are the procedures that i followed to boot up Miui Eu
- Flash official 8.12.13 (Dev Fastboot Rom) through MiFlash.
- Flash TWRP 1102
- Clean Data
- Push/ Copy and Flash 8.12.20( EU Rom), it booted up finally without redirecting to Fastboot.
- Update 8.12.20 to latest available from system updater.
- Now there won't be any recovery or we aren't able to enter into available recovery even though the system boots.
- Flash TWRP 1227.
need help, I tried to flash ROM eu 9.5.23 using 9.2.16 dev ROM as the base. twrp used 1227 and after rebooting enter fastboot mode.
twrp 1102 and 1217 do not want to enter recovery only the MI display
1yang said:
need help, I tried to flash ROM eu 9.5.23 using 9.2.16 dev ROM as the base. twrp used 1227 and after rebooting enter fastboot mode.
twrp 1102 and 1217 do not want to enter recovery only the MI display
Click to expand...
Click to collapse
Flash OREO fastboot official rom 9.5.10 or 11 with MIFLASH in order to reset the partition. Install 1217 TWRP and FORMAT DATA/yes (in TWRP wipe section) Do it it twice.
Reboot recovery and load EU rom from you computer with explorer.
Install EU rom and 1227 TWRP BEFORE rebooting the rom.
Welcome to the club!
lolo9393 said:
Flash OREO fastboot official rom 9.5.10 or 11 with MIFLASH in order to reset the partition. Install 1217 TWRP and FORMAT DATA/yes (in TWRP wipe section) Do it it twice.
Reboot recovery and load EU rom from you computer with explorer.
Install EU rom and 1227 TWRP BEFORE rebooting the rom.
Welcome to the club!
Click to expand...
Click to collapse
oke i will try thanks
Can anyone help me? im trying to flash xiaomi.eu rom with unlocked bl then i flash twrp using fastboot after that i go into twrp then wipe dalvik / cache n data and then install xiaomi.eu ROM after finished the flashing i reboot the system but what i got is bootloop into twrp n i can't boot into xiaomi.eu rom
I'm not very experienced with this as other users and I don't know why this happens, but I got the same problem a few days ago. Solved it by flashing the Orange Fox Recovery R10 with the flashed TWRP. After that, the system booted perfectly, but I cannot guarantee it will work with you.
feyzna said:
Can anyone help me? im trying to flash xiaomi.eu rom with unlocked bl then i flash twrp using fastboot after that i go into twrp then wipe dalvik / cache n data and then install xiaomi.eu ROM after finished the flashing i reboot the system but what i got is bootloop into twrp n i can't boot into xiaomi.eu rom
Click to expand...
Click to collapse
Flash a fastboot rom and reflash the twrp recovery. Thats what worked for me.
feyzna said:
Can anyone help me? im trying to flash xiaomi.eu rom with unlocked bl then i flash twrp using fastboot after that i go into twrp then wipe dalvik / cache n data and then install xiaomi.eu ROM after finished the flashing i reboot the system but what i got is bootloop into twrp n i can't boot into xiaomi.eu rom
Click to expand...
Click to collapse
I had this with my friend after first boot it goes back to twrp. We tri d plenty of things then I suggested njust clicking reboot ->system and it worked.
Seems its a bugnonly on first boot
Resolved
already resolved it by reflash twrp > format data > install custom rom
Hi, I've been trying to root my phone for a while now. I tried installing twrp mauronofrio and orange fox, but when I flash the magisk zip, it enters in some kind of bootloop, but it takes me to the recovery again. I've tried uninstalling magisk, so it will make my phone work again, but then I have to install the recovery again. So, anyone knows why I can't flash magisk nor keep the recovery?
Thanks
Hey, which ROM have you tried to install it on?
can't root it!
Hi
same problem with me, i've tried for 3 days so far.
Stock EEA Rom Android 10, MIUI 11 (and tried with MIUI 10 android 9), Unlocked.
i tried:
1-Flash stock rom.
2-Flash recovery
3-Flash magisk
4-flash Disable_Dm-Verity_10.20.2019.zip
>> Bootloop.
and tried:
1-Flash stock rom.
2-Flash recovery
3-flash Disable_Dm-Verity_10.20.2019.zip
4-Flash magisk
5-flash Disable_Dm-Verity_10.20.2019.zip again.
>> Same result.
Also:
i tried:
1-Flash stock rom.
2-Flash recovery
3-Flash magisk
4-flash Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip
5- wipe Data parition.
>> Its worked! nut without Encyption!!
i tried to downgrade to Global stock rom (Android 9, MIUI 10)
same result.
Stock EEA Rom Android 10, MIUI 11
have problem with magisk 20.1 try magisk 19.4 or change to xiaomi.eu 11 it much better with call recording and mfs and u can root it with 20.1 magisk
i tried this stock rom before same issue with me
Does work with magisk 19.4?
I'm thinking of rooting my Mi 9t pro.
Neleks90 said:
Does work with magisk 19.4?
I'm thinking of rooting my Mi 9t pro.
Click to expand...
Click to collapse
I will try after few min's, will write any update!
mkaraz1994 said:
I will try after few min's, will write any update!
Click to expand...
Click to collapse
Thanks. I'm so curious whether flashing magisk 19.4 will work or not.
Neleks90 said:
Thanks. I'm so curious whether flashing magisk 19.4 will work or not.
Click to expand...
Click to collapse
I'm so sorry, but doesn't works!
i tried with Android 9, and Android 10 same result bootloop!!
so i'm going to install xiamoi.eu verisons and try!
Can you tell me how recovered from bootloop?
What did you do to make your phone workig again?
Neleks90 said:
Can you tell me how recovered from bootloop?
What did you do to make your phone workig again?
Click to expand...
Click to collapse
when i've bootloop i uninstall magisk by its uninstall.zip, or re-flash stock rom by MiFlash tools or by Orange/TWRP recovery, almost i've tried everything in the forum to get rooted by no any way rooted it!
but Finally rooted!
with xiamoi.eu rom!
Thanks to @Antidote03
mkaraz1994 said:
when i've bootloop i uninstall magisk by its uninstall.zip, or re-flash stock rom by MiFlash tools or by Orange/TWRP recovery, almost i've tried everything in the forum to get rooted by no any way rooted it!
but Finally rooted!
with xiamoi.eu rom!
Thanks to @Antidote03
Click to expand...
Click to collapse
Great happy to hear that.
Could you please tell me which version you use now?
You only flashed xiaomi.ec rom and magisk?
Xiaomi.eu rom via twrp root with magisk =gg
Great.
Which version you have installed? Could you please tell me to know which to download.?
As far as I can see you haven't formatted your data! You need to format your data before rebooting to system!
Neleks90 said:
Great.
Which version you have installed? Could you please tell me to know which to download.?
Click to expand...
Click to collapse
latest version, i do this steps:
wipe data, cache, d-cache
flashing the rom by TWRP
reboot, setup my phone
reboot to recovery flash magisk 20.1 zip
reboot to phone and installed magisk manager!
All its done!
FallenJedi said:
As far as I can see you haven't formatted your data! You need to format your data before rebooting to system!
Click to expand...
Click to collapse
if you re-read my post will see the another, after i foramt the data its will work yeah, but without encryption!
so did you've rooted K20 pro/Mi 9T pro with stock rom by magisk and its done with encryption?
Hello guys,
My Red Magic 3 is running on CN 3.29 and i have been received a new OTA update and no matter what, i cannot install it because of the root. My RN3 is equipped with TWRP recovery and magisk.
My Question is, Can i just download the ROM and just zip it through TWRP without any desktop help? Because I don't have pc. Any one who have tried this kind of method feel free to reply here. Will be so helpful. Thank youuu
yes you can.first flash rom and dont reboot go back flash twrp then boot twrp and flash magisk ..profit
What is RN3?
walkwitmeinhel said:
yes you can.first flash rom and dont reboot go back flash twrp then boot twrp and flash magisk ..profit
Click to expand...
Click to collapse
How do you want me to flash rom through twrp or system update recovery.
Once installation done of rom, can we install magisk tht is in internal storage?
Can we install twrp from twrp????
Nightwish1976 said:
What is RN3?
Click to expand...
Click to collapse
I'm sorry, RM3* red magic 3
kiranaxel said:
How do you want me to flash rom through twrp or system update recovery.
Once installation done of rom, can we install magisk tht is in internal storage?
Can we install twrp from twrp????
Click to expand...
Click to collapse
i already share working twrp for A10 yes flash rom from twrp dont reboot go back flash twrp.img and reboot to twrp and flash magisk
walkwitmeinhel said:
i already share working twrp for A10 yes flash rom from twrp dont reboot go back flash twrp.img and reboot to twrp and flash magisk
Click to expand...
Click to collapse
Any linkz to watch and do?
walkwitmeinhel said:
i already share working twrp for A10 yes flash rom from twrp dont reboot go back flash twrp.img and reboot to twrp and flash magisk
Click to expand...
Click to collapse
Thanks Buddy, it worked. And i had to reinstall gapps and magisk third time then gapps worked flawlessly.
i was using pixel experience rom then was having this auto phone reboot issue
then switched to xiomi stock rom having same issue
currently using 13.0.7 latest stock rom
still having this issue
how to fix this issue?
is this hardware issue?
juniorhero said:
i was using pixel experience rom then was having this auto phone reboot issue
then switched to xiomi stock rom having same issue
currently using 13.0.7 latest stock rom
still having this issue
how to fix this issue?
is this hardware issue?
Click to expand...
Click to collapse
Try again this procedure step by step
flashing instructions
Flash ofox 12.1_3
Format data with yes
Reboot ofox
Flash fw (right for sweet or sweetin, otherwise hard brick)
Flash ROM
Delete dalvik and caches with ofox
Format data with yes again
Reboot system
Flashing Magisk not until first boot and setup otherwise sometimes problems...
i was using xiaomi installer windows app in fastboot mode -- clean flash
won't it automatically remove the cache and data without using ofox recovery?
Laptapper said:
Try again this procedure step by step
flashing instructions
Flash ofox 12.1_3
Format data with yes
Reboot ofox
Flash fw (right for sweet or sweetin, otherwise hard brick)
Flash ROM
Delete dalvik and caches with ofox
Format data with yes again
Reboot system
Flashing Magisk not until first boot and setup otherwise sometimes problems..
Click to expand...
Click to collapse
juniorhero said:
i was using xiaomi installer windows app in fastboot mode -- clean flash
won't it automatically remove the cache and data without using ofox recovery?
Click to expand...
Click to collapse
Anyway, something wrong in your procedure, so I recommend to try my.....
Laptapper said:
Anyway, something wrong in your procedure, so I recommend to try my.....
Click to expand...
Click to collapse
i want o install xiaomi.eu rom in sweetin
is it possible?
xiaomi.eu_multi_HMNote10Pro_V13.0.15.0.SKFMIXM_v13-12.zip
juniorhero said:
i want o install xiaomi.eu rom in sweetin
is it possible?
xiaomi.eu_multi_HMNote10Pro_V13.0.15.0.SKFMIXM_v13-12.zip
Click to expand...
Click to collapse
Yes, but follow accurately installation instructions