I did a factory reset from the settings menu and and while it was reseting it randomly turned off. I thought that means it was done and I needed to start it back up. After I tried to press the power button I get no response. A complete black screen and not even the M logo. I tried charging it overnight and it still has a black screen. Any help please?
Edit: Apprently it works now right after posting on XDA...
Hi!
Does anyone know the meaning of this screen ?? Image attached.
Appears on startup atfer WindowsPhone 8 logo and remain with this screen forever.
Thanks in advance !!!!!!
psper said:
Hi!
Does anyone know the meaning of this screen ?? Image attached.
Appears on startup atfer WindowsPhone 8 logo and remain with this screen forever.
Thanks in advance !!!!!!
Click to expand...
Click to collapse
My guess is you should charge your phone before doing whatever you want to do. The thunder thingie must reflect an insufficient power issue.
No. no. no.
Its the Qualcomm boot loader mode that gets started by holding power and volume up.
To get out, just hold the power button and volume down until the screen goes blank. (Soft reset)
If your device keeps starting up to that screen, that means your device is corrupt and needs reflashed.
Edit:
I might have figured it out, while I was in that red triangle / exclamation point screen, I pressed power / volume, then when the screen turned black (phone off) I let go of power and kept holding volume, and it finally entered the bootloader and RUU is now running. Will edit the thread again if that goes through. Leaving info in case anyone runs into the same issue in the future.
Edit2:
The RUU failed when the fastboot binary crashed on step 4 @ 96%, so I switched to a USB3 port and reran and it got through 100% without a hitch, now the phone is working perfectly.
-----------------------------------------------------------------------------------------------------------
Hi, my phone is s-off, bootloader unlocked, h7_wls.
I flashed 5.05.651.2_full_firmware.zip (to install the ViperOne rom - it says to update the firmware) through fastboot, running it 2 times as recommended. Then I ran fastboot reboot and the phone was stuck in a boot loop, the white screen with the HTC logo would appear, then the screen would turn black (still on as it has the IPS blue glow) then it turns off (full black) and turns on again to repeat the loop.
I've tried holding down volume + power until the home/back flash then letting go of power and holding volume, but the phone would just reboot without going into the bootloader.
I've also tried shining the LED from my other phone onto the light sensor and holding power for 15 seconds, which turns off the phone. If I turn it back on, it returns the phone into the aforementioned boot loop.
Doing the volume + power thing, and running the RUU_M7_WL_K44_SENSE60_SPCS_MR_Sprint_WWE_5.05.651.2_Radio_1.01.20.0904_2_NV_SPCS_4.38_003_release_393160_signed_2.exe file while the home/back buttons flash gets the phone into a black background with a red triangle / exclamation point but the RUU program exits with Error[170]: USB CONNECTION ERROR.
Typing adb devices while in the black screen with red triangle / exclamation point, it sees the device but says the device is offline, typing fastboot devices returns nothing.
I've tried 3 USB cables.
Not sure what to do next?
Thanks.
kevinlekiller said:
Edit:
I might have figured it out, while I was in that red triangle / exclamation point screen, I pressed power / volume, then when the screen turned black (phone off) I let go of power and kept holding volume, and it finally entered the bootloader and RUU is now running. Will edit the thread again if that goes through. Leaving info in case anyone runs into the same issue in the future.
Edit2:
The RUU failed when the fastboot binary crashed on step 4 @ 96%, so I switched to a USB3 port and reran and it got through 100% without a hitch, now the phone is working perfectly.
-----------------------------------------------------------------------------------------------------------
Hi, my phone is s-off, bootloader unlocked, h7_wls.
I flashed 5.05.651.2_full_firmware.zip (to install the ViperOne rom - it says to update the firmware) through fastboot, running it 2 times as recommended. Then I ran fastboot reboot and the phone was stuck in a boot loop, the white screen with the HTC logo would appear, then the screen would turn black (still on as it has the IPS blue glow) then it turns off (full black) and turns on again to repeat the loop.
I've tried holding down volume + power until the home/back flash then letting go of power and holding volume, but the phone would just reboot without going into the bootloader.
I've also tried shining the LED from my other phone onto the light sensor and holding power for 15 seconds, which turns off the phone. If I turn it back on, it returns the phone into the aforementioned boot loop.
Doing the volume + power thing, and running the RUU_M7_WL_K44_SENSE60_SPCS_MR_Sprint_WWE_5.05.651.2_Radio_1.01.20.0904_2_NV_SPCS_4.38_003_release_393160_signed_2.exe file while the home/back buttons flash gets the phone into a black background with a red triangle / exclamation point but the RUU program exits with Error[170]: USB CONNECTION ERROR.
Typing adb devices while in the black screen with red triangle / exclamation point, it sees the device but says the device is offline, typing fastboot devices returns nothing.
I've tried 3 USB cables.
Not sure what to do next?
Thanks.
Click to expand...
Click to collapse
oh yeah this time happened to me as well
basically all your phone is doing is rebooting
you need to get it to power down somehow. I managed to force shut it down using the hold power thing and then held volume down and power to get to the boot loader
but if anyone is having difficulty another sure fire way to get the phone to shut down is to wait for the battery to die (may take a really long time)
Hi,so i replaced LCD in my I9515, I've been doing this with youtube tutorial. Before 1-2 weeks ago my phone boot normally but i couldnt see anything due to broken LCD. In store, guy took my battery and connected it to a naked motherboard and lcd to see if it's working. After replacment when i try to boot it's stuck on Samsung Galaxy S4 logo and wont boot further. I can go into download mode, computer and odin are seeing connected phone, but i cannot boot into recovery it's just showing blue "booting recovery" and nothing happening. When I charging it, the grey battery pops out, but when i unplug it the battery is still there like it's still connected. Sometimes when i try to turn it off when it's stuck on galaxy s4 logo it's turning off then on by itself like 2 or 3 times. Any ideas how to fix it? It's hardware or software problem? In a minutes i'll try to flash stock soft from sammobile. Phone was never rooted and no custom roms were installed.
EDIT Flashing with ODIN not solved the problem
EDIT Now phone doesnt show battery when connected just one vibrate and screen is blank, and when i try to boot it while connected it's just vibrating and still black screen. When it was connected to pc it was vibrating every 2 seconds. When I try to boot it's by itself trying to boot recovery but it's not booting and blue "recovery booting" just hang on top of screen and nothing happening.
Wrong forum ?
Hi everybody,
yesterday I found my X620 with a black screen. I can power off and on by long-pressing the power button, but after the LeEco logo the screen goes black (but it's on, just showing only the black color).
I tried to power+volup but after the initial screen with written "recovery mode" it goes the same way.
I can also get to the fastboot screen with power+voldown and fastboot.exe devices can find it.
I have a backup of the rom mounted by the reseller but I really don't know what to do with it.
Can some give me an help? Sorry, I'm a newbie...
Thank you
KuRLiC