Need Help Urgent - Xiaomi Redmi 8 Questions & Answers

Guys I screwed up. I tried going back to stock miui from xiaomi eu. I formatted cache,dalvik,internal and system. After i tried flashing stock zip. nothing it gave error. Now when m trying to format again it is giving failed to mount for all partitions. What to do .

You need to flash a fastboot rom when coming back to stock.
Assuming you didn't break anything by wiping the partitions, put the phone in fastboot mode, download MiFlash and the right fastboot rom for your device from here https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-8-all-miui-firmwares/ or here https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-8a-all-miui-firmwares/ and flash it, make sure to select "clean all" instead of the default "clean all and lock" in the bottom right corner so the bootloader stays unlocked in case something goes wrong.
Also make sure you install all of the drivers and it's best to do it on a laptop since you might brick the phone if power cuts off mid flash.

Maranex said:
You need to flash a fastboot rom when coming back to stock.
Assuming you didn't break anything by wiping the partitions, put the phone in fastboot mode, download MiFlash and the right fastboot rom for your device from here https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-8-all-miui-firmwares/ or here https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-8a-all-miui-firmwares/ and flash it, make sure to select "clean all" instead of the default "clean all and lock" in the bottom right corner so the bootloader stays unlocked in case something goes wrong.
Also make sure you install all of the drivers and it's best to do it on a laptop since you might brick the phone if power cuts off mid flash.
Click to expand...
Click to collapse
Thanks a lot. Worked. Had one flashtool bug, but googled . Thanks a ton. Nearly had a heartattack.

Related

[Q] Htc One BRICKED.

After only four day of having this phone i managed to brick it. I would really like to know if its fixable or if i have a really nice paper weight. Im stuck on a boot loop, I was half way through flashing a rom when it suddenly shut off. Now it will not boot up. I can load into the bootlader but when i try to go into recovery it just sends me to fastboot. When i restart the phone i can see the old recovery (TWRP)for just an instant but then the screen goes completely black. If i plug in to my pc, nothing happens my computer detects it but it says y device is damaged nd it cant identify it. PLEASE HELP Am i out of luck?
Ive looked around but i couldnt seem to find anyone with the same problem as me (Sprint Variant)
Good news it's not bricked i would put this question on the rom thread someonethere sshould be able to help
There's a Sprint One forum as well, so hopefully you found a ROM on there!
http://forum.xda-developers.com/forumdisplay.php?f=2215
jaythenut said:
Good news it's not bricked i would put this question on the rom thread someonethere sshould be able to help
Click to expand...
Click to collapse
I really hope so because on a college budget i cant afford another phone D:
Seen this in a couple of other places. Seems certain recoveries are possibly becoming currupted during flashing a new ROM.
What you need to do it get back into fastbboot, and....
fastboot erase recovery
fastboot erase cache
the re-flash your recovery, boot into recovery, full wipe and reflash your ROM.
wnp_79 said:
Seen this in a couple of other places. Seems certain recoveries are possibly becoming currupted during flashing a new ROM.
What you need to do it get back into fastbboot, and....
fastboot erase recovery
fastboot erase cache
the re-flash your recovery, boot into recovery, full wipe and reflash your ROM.
Click to expand...
Click to collapse
When i go back into fastboot my only options are
-Bootloader
-Reboot
-Reboot bootleader
-Power down.
I appriciate the help!
i suggest you contact with HTC customservices to repair this problem.
Muquita said:
When i go back into fastboot my only options are
-Bootloader
-Reboot
-Reboot bootleader
-Power down.
I appriciate the help!
Click to expand...
Click to collapse
Can you flash recovery in fastboot ?
the safest thing to do is relock and use a matching RUU to get back to stock
Muquita said:
When i go back into fastboot my only options are
-Bootloader
-Reboot
-Reboot bootleader
-Power down.
I appriciate the help!
Click to expand...
Click to collapse
Your phone isn't bricked. There are two tools in this forum that can help you. One is made by hasoon2000(I think that's his user name), and the other is jwtool(I think). Use them to help to flash a recovery if you don't know how to use fastboot.
DynamicRam said:
Can you flash recovery in fastboot ?
the safest thing to do is relock and use a matching RUU to get back to stock
Click to expand...
Click to collapse
I cannot. My computer wont recognize it. I re-installed the driver and it Says my device malfunctioned.
Im giving up hope here.
Muquita said:
I cannot. My computer wont recognize it. I re-installed the driver and it Says my device malfunctioned.
Im giving up hope here.
Click to expand...
Click to collapse
dont give up
Sent from my HTC One
Muquita said:
I cannot. My computer wont recognize it. I re-installed the driver and it Says my device malfunctioned.
Im giving up hope here.
Click to expand...
Click to collapse
Edit: Just got done typing the stuff below and saw you can't connect to your device in fastboot? What do you mean by re-installed driver?
Don’t worry, as long as you can still get into hboot your phone is not completely bricked!
The fastboot commands I referred to need to be carried out on your laptop/pc when you phone is connected in fastboot.
Can I assume that as you have already unlocked bootloader and flashed a custom recovery you are already familiar with this and have your computer set up for fastboot commands?
(Apologies if you already know some of this, best not to skip parts out though!)
I’d start with downloading a fresh version of your chosen recovery, and place it in your fastboot directory ready. I’d also do the same with your ROM.
Like you have already done, boot into fastboot. Connect your phone to your pc, and the red text should change to ‘Fastboot USB’.
Then open up command prompt and get to your fastboot directory. (On Windows 7 you just find that folder in Explorer, hold shift and right-click, then choose ‘Open command window here’.)
To check your pc is talking to your phone, type ‘fastboot devices’. You should get a device serial number back if all is well.
Then type ‘fastboot erase cache’ and hit enter.
Then type ‘fastboot erase recovery’ and hit enter.
Then type ‘fastboot flash recovery [name of recovery].img’ and hit enter.
Then type ‘fastboot reboot recovery’ and hit enter.
Hope fully you should successfully boot into recovery now. Once in recovery, mount USB storage and copy over your fresh ROM. Choose to do a full wipe including cache and dalvik, then reflash your ROM.
Reboot.
Let me know how this goes.
cronus101 said:
Your phone isn't bricked. There are two tools in this forum that can help you. One is made by hasoon2000(I think that's his user name), and the other is jwtool(I think). Use them to help to flash a recovery if you don't know how to use fastboot.
Click to expand...
Click to collapse
I used the hasoon2000 to flash TWRP earlier, but my problems is that my pc wont recognize my phone. When i plug it in it and try to re-flash it it cant find it. When i check my devices it shows up as an android device but it says the drivers are damaged. if i could get it to read it i think i should be eable to reflash somethint.
I APPRICIATE ALL THIS HELP. i really am trying to be as specific as possible :fingers-crossed:
Hey so just a thought and experience I have had with all my HTC phones is when you see that quick glimpse of the TWRP recovery screen then it disappears to an empty black screen......you are sometimes still in a form of recovery but during your Rom flash something (i don't know for sure) changed and it doesn't show the screen only black. So with that long explanation out of the way....have you tried once the screen goes black the
"adb devices "
Mine whenever in this situation would return the output of serial number and recovery so then you can push or sideload the Rom and boot into the system at which point your fastboot drivers will finally be recogniZed.....
Hope this helps a little
Sent from my HTC EVARE_UL using xda app-developers app
Muquita said:
I used the hasoon2000 to flash TWRP earlier, but my problems is that my pc wont recognize my phone. When i plug it in it and try to re-flash it it cant find it. When i check my devices it shows up as an android device but it says the drivers are damaged. if i could get it to read it i think i should be eable to reflash somethint.
I APPRICIATE ALL THIS HELP. i really am trying to be as specific as possible :fingers-crossed:
Click to expand...
Click to collapse
I'd say the next step is to re-install your drivers in the SDK. Open up your Android SDK and reinstall them. In Windows Device Manager, find your connected device (probably now with an exclamation mark on it) and right click on it and select 'Update Driver'.
(Assuming you are using Windows 7 here?)
http://developer.android.com/tools/extras/oem-usb.html
Muquita said:
When i go back into fastboot my only options are
-Bootloader
-Reboot
-Reboot bootleader
-Power down.
I appriciate the help!
Click to expand...
Click to collapse
when you are in fastboot, connect your phone using the usb cable, and when you see "fastboot" written in red turned into "fastboot usb" or something like this, do the commands below using cmd window of course :
1) fastboot erase recovery
2) fastboot erase cache
3) fastboot flash recovery recoveryname.img
4) fastboot erase cache
Let us know when you fix it
Good Luck
wnp_79 said:
I'd say the next step is to re-install your drivers in the SDK. Open up your Android SDK and reinstall them. In Windows Device Manager, find your connected device (probably now with an exclamation mark on it) and right click on it and select 'Update Driver'.
(Assuming you are using Windows 7 here?)
http://developer.android.com/tools/extras/oem-usb.html
Click to expand...
Click to collapse
(Win8 but the procces is identical.) All my drivers are up to date. Still no love.
On the dev forum is a thread that includes all the latest drivers (including an app to remove older drivers.)
Find that thread, download the drivers and bmp and driver removal tool. Remove drivers with tool, install the new drivers, reboot, connect phone and see if 'adb devices' finds anything.
Also make sure you're using the latest adb.
Sent from my HTC One using xda app-developers app
thneed said:
Hey so just a thought and experience I have had with all my HTC phones is when you see that quick glimpse of the TWRP recovery screen then it disappears to an empty black screen......you are sometimes still in a form of recovery but during your Rom flash something (i don't know for sure) changed and it doesn't show the screen only black. So with that long explanation out of the way....have you tried once the screen goes black the
"adb devices "
Mine whenever in this situation would return the output of serial number and recovery so then you can push or sideload the Rom and boot into the system at which point your fastboot drivers will finally be recogniZed.....
Hope this helps a little
Sent from my HTC EVARE_UL using xda app-developers app
Click to expand...
Click to collapse
This actually sounds really similar to my situation.. Would you care to be a little more specific on the procedure? noob here.
Tabtoub said:
when you are in fastboot, connect your phone using the usb cable, and when you see "fastboot" written in red turned into "fastboot usb" or something like this, do the commands below using cmd window of course :
1) fastboot erase recovery
2) fastboot erase cache
3) fastboot flash recovery recoveryname.img
4) fastboot erase cache
Let us know when you fix it
Good Luck
Click to expand...
Click to collapse
My pc will not recognize my phone. The drivers are up to date but when i plug it in it says something malfunctioned ?

[Q] Stuck in endless bootloop and recovery is not working either.

Hi everyone
Since I restarted my phone last night, my phone has been in a endless bootloop and I can't even enter recovery, without it rebooting again and going into the same endless bootloop again, around 2 seconds after showing the "Teamwin" logo.
I'm using ARHD, and if I remember correctly it's version 71.1. TWRP is "openrecovery-twrp-2.6.3.3-m7" and running ElementalX kernel.
I expect my partition is somehow corrupted, but I'm at a loss of ideas as to how I can recover my phone again. I would apreciate if I could somehow manage to make a backup of my data, but it that's totaly hopeless, I'm thinking of going for the ArtMOD ROM instead and starting fresh.
Is there a helpfull soul out there, that could maybe give me some insights as to what I can do from here? Thanks in advance!
I was hoping I could install a stock ROM and start from scratch again, but I somehow suspect having used a modified ROM has gotten me in trouble now and the ROM Upgrade utility sees this as a downgrade. I've not been able to find a newer ROM for the .401. series than "RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe". Although the updater believes I'm updating from 4.19.401.11 (the ARHD ROM).
I can get into FASTBOOT USB and the phone goes to the black HTC logo screen when trying to update, but quickly fails on the PC during the process at "Updating 1/5". When unplugging the USB cable the phone shows:"
RUU
Security fail!
Update Fail!
I've attached two screenshots, to better explain
Can some kind soul out there please help me getting a working phone again? What ROM I'll end up with doesn't really matter
Since you're using unlocked bootloader, why don't you try RUU to get back on Stock ROM.
Here is the collection of ROMS
Download your ROM.
from Windows Command prompt
adb reboot bootloader #
If it didn't work, Press and Hold Power button along with Volume down of your phone,
When you reach to bootloader, get into fastboot mode.
Now follow the following commands to restore the STOCK Rom. (make sure your downloaded ROM are in the same directory where you have fastboot.exe, abd, and abdwin.api etc)
1) fastboot erase cache
2) fastboot oem rebootRUU
3) fastboot flash zip RUU.zip (RUU.zip is of course your downloaded Stock ROM). If it says Failed, try again.
4) fastboot erase cache
5) fastboot reboot-bootloader
6) fastboot reboot
Good Luck
Hope that helps.
Thank you so much for helping out!
After several tries, tries and retries, I finally managed to get the phone back up and running with the stock ROM. I believe what finaly did the trick, was to use "fastboot oem lock" to get the stock ROM installed. From here, I'm now able to unlock it again and install a custom recovery (TWRP) and ROM (I went for ARTMOD). Thanks again!!!

Bootloop and can't boot into recovery! HELP!

I usually don't do this, but today I decided to try and flash a rom that went along with my chipset, which is MT6735. It was the worst move I have ever made, and not to mention it was also stupid. Now it keeps bootlooping, and when I try to boot into recovery it bootloops some more! So I was wondering if anyone could help me get back on track.
http://forum.xda-developers.com/r1-hd/how-to/firmware-amazon-blu-r1-hd-t3428197/page1
danielsonyt said:
I usually don't do this, but today I decided to try and flash a rom that went along with my chipset, which is MT6735. It was the worst move I have ever made, and not to mention it was also stupid. Now it keeps bootlooping, and when I try to boot into recovery it bootloops some more! So I was wondering if anyone could help me get back on track.
Click to expand...
Click to collapse
Well rom from other phone is bad idea.
What method if install of this rom. Recovery or flash tool
Check bootllader unlock status as first step.
In fastboot do "fastboot getvar all"
Look at end needs to be unlocked=yes and secure=no or could cause bootloop
I have full package minus nvram and user data if flash tool connects to phone.
Package will bring you back to out of box state. Including locking bootloader and resetting warrenty status to yes.
If you have fastboot access and stock boot.img try "fastboot boot path_to_boot.img"
And if it boots you can "fastboot flash boot path_to_boot.img"

SOFT BRICK using tool Xiaomi Mi A2

Hi guys, i need some help pleeease!
I was with the November security patch on my cell phone, I unlock the bootloader and went to use the friend tool (https://forum.xda-developers.com/mi-a2/how-to/mi-a2-toolkit-unlock-bootloader-root-t3834585) to activate the camera2api.
But it gave problem and the cell phone did not turn on, it was locked in the screen of android one.
So I downloaded the patched_boot.img from the version I was in and put it via fastboot. did not work.
Now, my phone is in this situation: I tried to use MiFlash (three versison: 2018528, 2017720 and 20151028) and they fail in the middle of the process, accusing "FAILED (command write failed (Unknown error))".
And: when I try to connect the cell phone normally, it shows the unlocked bootloader warning and goes straight to the fastboot, even without my request. This is strange. Perhaps because the system is damaged by the miflash unfinished
Obs: bootloader are unlocked and i can access twrp
If anyone can help me I will be very grateful and happy
What exactly did the "tool" do? I mean if you don't know that, pretty difficult to diagnose what's wrong...
AsItLies said:
What exactly did the "tool" do? I mean if you don't know that, pretty difficult to diagnose what's wrong...
Click to expand...
Click to collapse
Hi.
The tool (her topic link is up there) promised to activate camera2api without root my device (allowing OTAs in the future).
I believe she did a "temporary root" with a "temporary" boot.img just to activate the camera2api, and when it rebooted, it would return to normal boot.img without root. I do not know if I could explain it well.
The current issue is that it seems that the system is currently "destroyed or corrupted". Can not I reinstall the entire system through TWRP? Or something like this
Like I said, you don't know what it actually did. What it promised is one thing, what it did... another
That's the problem with 'tools'.
Have you tried doing a factory reset? Hold Vol up and power until it gets to Recovery (hopefully), if you do a quick press of vol up, that gets past the 'no command'. Then use vol up and down for selection and press power when on 'factory reset'.
It might work
AsItLies said:
Like I said, you don't know what it actually did. What it promised is one thing, what it did... another
That's the problem with 'tools'.
Have you tried doing a factory reset? Hold Vol up and power until it gets to Recovery (hopefully), if you do a quick press of vol up, that gets past the 'no command'. Then use vol up and down for selection and press power when on 'factory reset'.
It might work
Click to expand...
Click to collapse
You are right, friend.. this is the problems with tools! I never use tools with my A1 and past phones.. just this time :crying:
I tried the factory reset now. And it did not work, unfortunately. On the first attempt (I was in fastboot mode) he showed a white circle with the writing "ERASING" and then went back to the screen of Android One, and then I tried again Vol Up + Power and he appeared "No command" , and after I rebooted and tried again, nothing appears, it just restarts to the static screen of "Android One"
Another ideas?
erickxd said:
You are right, friend.. this is the problems with tools! I never use tools with my A1 and past phones.. just this time :crying:
I tried the factory reset now. And it did not work, unfortunately. On the first attempt (I was in fastboot mode) he showed a white circle with the writing "ERASING" and then went back to the screen of Android One, and then I tried again Vol Up + Power and he appeared "No command" , and after I rebooted and tried again, nothing appears, it just restarts to the static screen of "Android One"
Another ideas?
Click to expand...
Click to collapse
The only other thing I can think of would be to change the current slot. If that works you would be booted into the prior version of the OS vs the latest update you did.
In fastboot, do fastboot getvar current-slot
Depending on what that slot is, change it to the other one (can only be a or b)
thus fastboot set_active a (or b, whichever is not the current one)
then fastboot reboot - and hope it boots.
AsItLies said:
The only other thing I can think of would be to change the current slot. If that works you would be booted into the prior version of the OS vs the latest update you did.
In fastboot, do fastboot getvar current-slot
Depending on what that slot is, change it to the other one (can only be a or b)
thus fastboot set_active a (or b, whichever is not the current one)
then fastboot reboot - and hope it boots.
Click to expand...
Click to collapse
Well... fastboot don't recognize this command, he show the list of avaible commands
And i don't know why, but for now i can't boot in twrp.img
i'm going crazy :crying::crying::crying:
erickxd said:
Well... fastboot don't recognize this command, he show the list of avaible commands
And i don't know why, but for now i can't boot in twrp.img
i'm going crazy :crying::crying::crying:
Click to expand...
Click to collapse
That's probably because you have an old version of fastboot installed. Upgrade to the newest version, which should recognize dual slots.
dual slots are quite new.
AsItLies said:
That's probably because you have an old version of fastboot installed. Upgrade to the newest version, which should recognize dual slots.
dual slots are quite new.
Click to expand...
Click to collapse
Fastboot updated now! I changed the slot from B to A.
But doesn't work, unfortunately. After reboot, the phone can't boot and appears the screen asking between Try Boot Again or Factory Reset. I tried Factory Reset, but don't work =( return to the same screen.
What seems very strange to me, is the Miflash doesn't work. With my Mi A1 miflash ever save me
erickxd said:
Fastboot updated now! I changed the slot from B to A.
But doesn't work, unfortunately. After reboot, the phone can't boot and appears the screen asking between Try Boot Again or Factory Reset. I tried Factory Reset, but don't work =( return to the same screen.
What seems very strange to me, is the Miflash doesn't work. With my Mi A1 miflash ever save me
Click to expand...
Click to collapse
I've never used miflash, so no help there.
I'd try flashing the correct boot.img (for your software version). You can find the various boot images in the following link (don't forget to thank user ckpv5 for uploading these).
https://sourceforge.net/projects/others/files/Xiaomi_MiA2/
you would do fastboot flash boot_b boot.img
I'd suggest using b slot, as that was originally active. After flashing, set it back to active, try to reboot... then cross your fingers
AsItLies said:
I've never used miflash, so no help there.
I'd try flashing the correct boot.img (for your software version). You can find the various boot images in the following link (don't forget to thank user ckpv5 for uploading these).
https://sourceforge.net/projects/others/files/Xiaomi_MiA2/
you would do fastboot flash boot_b boot.img
I'd suggest using b slot, as that was originally active. After flashing, set it back to active, try to reboot... then cross your fingers
Click to expand...
Click to collapse
Doesn't work man.. I went to twrp and checking there in the "WIPES session", I saw that the SYSTEM partition is 0kb used and 0kb free. Appears to be entirely empty
Do not have a way to install the whole system via twrp?
erickxd said:
Doesn't work man.. I went to twrp and checking there in the "WIPES session", I saw that the SYSTEM partition is 0kb used and 0kb free. Appears to be entirely empty
Do not have a way to install the whole system via twrp?
Click to expand...
Click to collapse
No, I don't. But I can tell you, twrp is a recovery app. It shouldn't be in the boot slot. And, with dual slot configurations, there is no recovery partition. The other slot is now used to do a recovery.
In other words, the way we *used* to use twrp doesn't work on dual slot phones. I think that's a big part of the confusion people are having. While the boot images do have a small recovery part to them, it's not a separate partition.
If you're flashing boot.img, and setting that slot active, I've no idea how you're getting into twrp.
Since now your fastboot is working why don't you use miflash to flash official stock ROM
1. You need unlocked bootloader which you already have.
2. Run these command to unlock critical partition
fastboot flashing unlock_critical
3 . Download the official fastboot V9.6.14.0 ROM from
https://forum.xda-developers.com/mi-a2/how-to/ota-v9-6-5-0-odimife-t3823445
Or here
http://en.miui.com/getrom.php?r=353&m=yes&app=false
4. Install with miflash (you already know the how-to)
5. Once up & running, do OTA to latest
Later .. redo what you want to do like enable camera api2 with proper guide.
E.g: https://forum.xda-developers.com/mi-a2/how-to/how-to-enable-cam2api-simply-ota-t3858861
ckpv5 said:
Since now your fastboot is working why don't you use miflash to flash official stock ROM
1. You need unlocked bootloader which you already have.
2. Run these command to unlock critical partition
fastboot flashing unlock_critical
3 . Download the official fastboot V9.6.14.0 ROM from
https://forum.xda-developers.com/mi-a2/how-to/ota-v9-6-5-0-odimife-t3823445
Or here
http://en.miui.com/getrom.php?r=353&m=yes&app=false
4. Install with miflash (you already know the how-to)
5. Once up & running, do OTA to latest
Later .. redo what you want to do like enable camera api2 with proper guide.
E.g: https://forum.xda-developers.com/mi-a2/how-to/how-to-enable-cam2api-simply-ota-t3858861
Click to expand...
Click to collapse
Hello.
I've tried using Miflash several times (3 different versions), but it never ends, it end up with an error every time that he will copy the file system.img to the mobile phone (I analyzed the log).
The miflash divides the file system.img into 5 or 6 smaller parts to be able to transfer to the mobile phone, and in some of these parts gives error, everytime :crying:
AsItLies said:
No, I don't. But I can tell you, twrp is a recovery app. It shouldn't be in the boot slot. And, with dual slot configurations, there is no recovery partition. The other slot is now used to do a recovery.
In other words, the way we *used* to use twrp doesn't work on dual slot phones. I think that's a big part of the confusion people are having. While the boot images do have a small recovery part to them, it's not a separate partition.
If you're flashing boot.img, and setting that slot active, I've no idea how you're getting into twrp.
Click to expand...
Click to collapse
I can access twrp when I flash ''fastboot boot twrp.img" in powershell, so until the next reboot I have access to twrp
erickxd said:
Hello.
I've tried using Miflash several times (3 different versions), but it never ends, it end up with an error every time that he will copy the file system.img to the mobile phone (I analyzed the log).
The miflash divides the file system.img into 5 or 6 smaller parts to be able to transfer to the mobile phone, and in some of these parts gives error, everytime :crying:
Click to expand...
Click to collapse
When I read your post here - https://forum.xda-developers.com/showpost.php?p=78085858&postcount=188
"flashing is not allowed for critical partitions" usually due to critical partitions not unlocked. So .. if you already run "fastboot flashing unlock_critical" and you still have error using miflash .. nothing much I can offer to help. Hopefully you'll be able to fix it.
ckpv5 said:
When I read your post here - https://forum.xda-developers.com/showpost.php?p=78085858&postcount=188
"flashing is not allowed for critical partitions" usually due to critical partitions not unlocked. So .. if you already run "fastboot flashing unlock_critical" and you still have error using miflash .. nothing much I can offer to help. Hopefully you'll be able to fix it.
Click to expand...
Click to collapse
Hmm thanks for the answer!
Even when the operation fails after transfer a couple of archives before the system.img??? (on the Miflash)
If my phone was locked, Miflash could transfer these couple of archives before the operation fails?? Or if bootloader is locked, zero files can be passed by Miflash, and the error is apresented at the beginning of the operation?
Have you successfully unlocked critical partitions?
If yes, try to run flash_all.bat from the official stock image you downloaded. No need to use MiFlash.
prokaryotic cell said:
Have you successfully unlocked critical partitions?
If yes, try to run flash_all.bat from the official stock image you downloaded. No need to use MiFlash.
Click to expand...
Click to collapse
well... When I just run flash_all.bat from the stock image folder, the .bat file will recognize that I am running it for the connected mobile?
how exactly should I run flash_all.bat? just double clicking it in stock image folder? or should I copy the .bat to /adb folder and open power shell prompt in adb folder and execute the .bat from there? sorry for my ignorance
Can you show me, please?
erickxd said:
well... When I just run flash_all.bat from the stock image folder, the .bat file will recognize that I am running it for the connected mobile?
how exactly should I run flash_all.bat? just double clicking it in stock image folder? or should I copy the .bat to /adb folder and open power shell prompt in adb folder and execute the .bat from there? sorry for my ignorance
Can you show me, please?
Click to expand...
Click to collapse
Before someone can explain that, why don't you answer the question asked .. in fact at least 3 people was asking/telling ...
"Have you successfully unlocked critical partitions?"
Without the proper answer from you, not easy to help.

Stuck in Android One splash screen.

I unlocked the bootloader and critical partitions of my device but now the phone won't boot to system. It's stuck on the initial splash screen and it won't do anything. I've tried wiping /data from the stock recovery but nothing changes. Please help me because I literally got the phone two hours ago!
EDIT: I'm currently downloading the stock ROM from en.miui.com and I will try to install it to see if that changes anything.
If you're sure you unlocked it all, then use this opportunity to completely update the software. Download a full ROM at en.miui.com and extract it until you see a "flashall.bat". Once you do that, enter fastboot mode and type "fastboot oem edl". After that, install Mi Flash and plug the phone into a USB 2.0 port, mark the "flash all and keep unlocked" option in the bottom right corner of the screen and hit start. It will flash the full Pie ROM and you'll be able to boot the phone.
Just be aware that you'll activate the antirollback protection, so you won't be able to go back to Oreo, otherwise you'll brick your phone.
Good luck.
Sent from my Mi A2 using XDA Labs
Thanks for telling me even though I figured it out before I read your reply. I even installed Oreo so I could then install TWRP and it worked. I now have a new problem though. Whenever I try to send commands to the phone through fastboot it won't work. Fastboot somehow "resets" and the phone says on the top left corner "press any button to shutdown." I still can use the phone on stock ROMs by flashing them in edl but I can't flash twrp. I read in a Reddit post that it's a problem with ryzen based PCs but I didn't have the same problem before updating my bios. Sadly I can't revert and Im forced to use an older Intel based system to use fastboot. If you can help me with that I would be grateful.
Cuesta4 said:
If you're sure you unlocked it all, then use this opportunity to completely update the software. Download a full ROM at en.miui.com and extract it until you see a "flashall.bat". Once you do that, enter fastboot mode and type "fastboot oem edl". After that, install Mi Flash and plug the phone into a USB 2.0 port, mark the "flash all and keep unlocked" option in the bottom right corner of the screen and hit start. It will flash the full Pie ROM and you'll be able to boot the phone.
Just be aware that you'll activate the antirollback protection, so you won't be able to go back to Oreo, otherwise you'll brick your phone.
Good luck.
Sent from my Mi A2 using XDA Labs
Click to expand...
Click to collapse
sorry if I disturb but I'm really afraid to get into EDL mode, please tell me if these steps are correct :
1 Download the ROm (en.miui. com/download-353.html this would be the correct one right ? "add https")
2 Exctract unitil i see files like: flash_all.bat, flash_all.sh ecc
3 enter fastboot on my phone
4 connect the phone to the computer
5 open prompt (whit adb and fastboot installed) and type "fastboot oem edl"
6 install and open mi flash.
and now I haven't understood this part "install Mi Flash and plug the phone into a USB 2.0 port, mark the "flash all and keep unlocked" option in the bottom right corner of the screen and hit start".
can you explain me in detail ? please

Categories

Resources