Hi, I have owned a Xiaomi Mi 8 for a couple of years.
Recently I noticed that the volume of calls (and also of Whatsapp voice messages) is very low, if I'm outdoors I can't understand anything.
The phone is updated to MIUI 11 (June 2020 patch).
I tried to change "region" on the phone, clear the cache and check the settings but nothing changes.
I have the bootloader unlocked.
At the moment I'm not interested in root, also because I don't want to believe that that is the only way to solve the problem.
The smartphone is in perfect condition and recently I also tried to clean the earpiece speaker with cotton and alcohol.
The main speaker and the microphones work perfectly.
Thanks
Try cleaning the speaker with a toothbrush, it worked for me
Hey there, i've got the same problem since a couple of months. (maybe since the june update?)
The thing is, that whatsapp calls sound clear as before.
For normal calls, i have to turn on the loudspeaker to hear the other person.
At first, i thought it's a hardware defect, but the more i look into the internet, it seems that this issue is caused by the software.
I hope there is anyone out there with the same issue and hopefully with a plausible solution.
Xiaomi Mi 8 (MIUI11.0.5.0- June 2020)
Kind regards
Marc
Mactz said:
Hey there, i've got the same problem since a couple of months. (maybe since the june update?)
The thing is, that whatsapp calls sound clear as before.
For normal calls, i have to turn on the loudspeaker to hear the other person.
At first, i thought it's a hardware defect, but the more i look into the internet, it seems that this issue is caused by the software.
I hope there is anyone out there with the same issue and hopefully with a plausible solution.
Xiaomi Mi 8 (MIUI11.0.5.0- June 2020)
Kind regards
Marc
Click to expand...
Click to collapse
I have problems with WhatsApp too, but also in my opinion it's a software problem, maybe related to some app or update.
I really don't think my speaker is dirty, i also cleaned it with alcohol.
I wouldn't want to root the phone to increase the speaker volume, making it strain, if then the problem could be solved in another way.
up
First turn your phone off!
Put sticky tape on earpiece mesh and try to clean out the pores.
Then pour some acetone and alcohol on. let it evaporate for an hour. You can turn it on now.
Repeat tape cleaning process or use air compressor if you have.
The problem is not software, its the dirt in earpiece. Thank me later.
canozuysal said:
First turn your phone off!
Put sticky tape on earpiece mesh and try to clean out the pores.
Then pour some acetone and alcohol on. let it evaporate for an hour. You can turn it on now.
Repeat tape cleaning process or use air compressor if you have.
The problem is not software, its the dirt in earpiece. Thank me later.
Click to expand...
Click to collapse
It worked!! Thank you very much!
I never thought the problem could be caused by dirt, the phone looked clean.
In the last few months the call volume on mi mi 8 got lower and lower, at the point where i couldn't hear the other person. I wanted a new phone. I tried everything, nothing worked.
Eventualy i carefully pocked some holes on the headset grill with a small neddle, not to deep. After that i used the vacuum to remove all dust inside. i don t recomend this, it's just what i did
Now it works like new, almost to loud... Lol
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bboymiau said:
In the last few months the call volume on mi mi 8 got lower and lower, at the point where i couldn't hear the other person. I wanted a new phone. I tried everything, nothing worked.
Eventualy i carefully pocked some holes on the headset grill with a small neddle, not to deep. After that i used the vacuum to remove all dust inside. i don t recomend this, it's just what i did
Now it works like new, almost to loud... Lol
View attachment 5164807
View attachment 5164795View attachment 5164797
Click to expand...
Click to collapse
I did the same. It works like new. Nothing else helped.
VVV1981 said:
I did the same. It works like new. Nothing else helped.
Click to expand...
Click to collapse
Yes, works for me too and this is the only problem after 3 years of using...
Related
Hello,
I've had my tilt for less than a year now. Today, my screen, when I turned it on, shook and while it was shacking, it was showing multiple lines on the screen. At the end, the screen was complete white. I can still make/receive calls, however, I wouldn't know what's going on since the screen was white. It seems to me it was a loose connection???? It got me extremely worried. I took off the battery, made a hard-reset, tried to physically move the screen, non worked. all of a sudden, the screen was fine. Later today, it happened again.
Can anyone please explain this problem to me and how to fix it. I would really appreciate that...
Thank you
Not sure what "shacked" means.
But given you are under 1 year, you probably have a warranty. Would be best to try and get a warranty exchange.
To have you dig around inside checking connection and voiding your warranty, would not be wise with an active warranty.
JimmyMcGee said:
Not sure what "shacked" means.
But given you are under 1 year, you probably have a warranty. Would be best to try and get a warranty exchange.
To have you dig around inside checking connection and voiding your warranty, would not be wise with an active warranty.
Click to expand...
Click to collapse
I'm sorry, I meant to say "shake". Anyways, My phone is unlocked and I bought it from ebay... currently using it in Canada
iamcanadian said:
I'm sorry, I meant to say "shake". Anyways, My phone is unlocked and I bought it from ebay... currently using it in Canada
Click to expand...
Click to collapse
Ahh Booo.
Ok, Find mikechannon's disassembly guides and wiggle all your connections. Sounds like a loose connection to me.
Hello,
Thanks for the reply, I dismantaled my device and made sure all the connections are fine. The problem still appears....
Ok Next Thing it, The LCD panel is "dieing" you will probably need to replace it.
JimmyMcGee said:
Ok Next Thing it, The LCD panel is "dieing" you will probably need to replace it.
Click to expand...
Click to collapse
oh damn
I noticed that when it happens, if I touched the OK and the end call button together, it would sometimes solve the issue. I would have to do it several times though. Is that any hint? are there screen related connections underneath those buttons?
Thank you for your continuing support, much appreciated!
OK, I've noticed that once I click on the call button, the white screen shows up. As I said, I dismantled my device and checked all the connections. However, I didn't go further than the 15th page, i didn't go further because I though that it wasn't necessary.. That's the websites of the tutorial I followed:
http://www.mikechannon.net/PDF Manuals/Replacing the LCD on a Kaiser.pdf
So the two connections I made sure they are properly in was the small and big one only like in the picture below....
Connection #1:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connection #2:
Another view of Connection #2:
I appreciate any help possible.... Thank you all...
Thank you again for the continuing support
bump...
Please help as this issue is really bothering me. Anyhelp is much appreciated!
Those connections you have pointed out in those pictures are the keyboard ribbon connections....I think you might have to dismantle a bit further to get to the screen.
mic_888 said:
Those connections you have pointed out in those pictures are the keyboard ribbon connections....I think you might have to dismantle a bit further to get to the screen.
Click to expand...
Click to collapse
OK, I went further and was able to see the screen ribbon. I made sure the connections are in tight. However, after putting everything back, the problem still persist. Now, I'll be more than happy to buy a new screen IF it solves the problem... Please correct me if i'm wrong, doesn't seem more like a connection problem; maybe the chip that holds the ribbon cable is loose? In this case, it would need soldering???
Moreover, I noticed that the screen ribbon is underneath the talk button. Like I said before, touching the talk button solves the white screen*. Isn't that more proof that its not a screen issue?
I am very grateful for any advice...
Thank you
* Before completely dismantling the phone, it used to be touching the talk button brings the white screen problem, now its the opposite
hello
I have got a problem with my xperia, the top bar shows that my stereo headset is connected but is not...therefore, i cant hear anyone who is trying to call me or i call anyone.. i have been in a vodafone store and they could not find a solution, i also have done hard reset and is still the same... now im about to flash new rom. would that be a solution or any of you got different?
please help me, thanks in advance
try connecting headset again but give it a wiggle about, not too much also try pulling it out and puting it back in quickly several times in a row. be carefull.
i tried that already, not working
after a hard reset i can only assume it's a hardware fault, so i would go get it fixed because if you flash a new rom that will invalidate your waranty.
do that in the FMradio application
thank you guys, i also think that i should return it for vodafone service..
i tried in fmradio and still no working
sorry to hear that. good luck with that
last time that annoying thing happened to me i had to go to the htc HD fm radio app and plug and unplug the offical 3.5 connector to make it work( try plugging->listen to radio->set output to speakers-> then unplug)
a bunch of questions:
-what rom are you using
-did you try different 3.5 connectors
-is the earphone that caused the problem low quality?
the last time this happened to me i used the stylus and just waggled about for ages and ages and eventually the sensor registered that the headphones weren't plugged in.
do a search as plenty of people have had the exact same problem ...
good luck !
yes - just waggle the stylus around in it until it goes - worked for me
thank you..the thing with stylus works, hopefully but its still anoying to do that every time i put my headset
i have got an original vodafone uk rom
yes, i have tried many different headsets
the quality is fine
I have the exact same problem on my 4 month old X1, and now i dont rly know how hard i should wiggle with the stylus...
nottorious_91 said:
I have the exact same problem on my 4 month old X1, and now i dont rly know how hard i should wiggle with the stylus...
Click to expand...
Click to collapse
try waggling and then try inserting the headphones a few times and taking them out too
I've had the same prob for a week now.
After reading up on other HTC phones with the same issue I've found that what went wrong was a little hardware switch inside the jack failed to reset to its off position when the headphones where removed.
To locate the switch:
Turn the phone onto back so that the screen is facing upwards. The switch is at the 4-5 o'clock position if you look directly at the headphone jack, at around 1cm in.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I inserted a small pin which was bent a little at the end to relative position I have described and after I felt it snag just gave it a small wiggle. When doing this I noticed the headphone icon would disappear for a second and return.
This is how I knew I was in the correct position. Then I gave it a good twist.
(I think anti clockwise, but you will know from which direction worked when you wiggled)
The headphone icon disappeared for good and now I'm back to normal phone use!
(Do this at your own risk! But its more precise than sticking the stylus in blind)
kamilanglia17 said:
thank you guys, i also think that i should return it for vodafone service..
i tried in fmradio and still no working
Click to expand...
Click to collapse
DO NOT RETURN IT. This happened to me once, and ONLY once after using the phone for like 6 months. I soft reset and nothing happened.
There is something wrong with the way the device toggled the connection. Just replug and unplug and press play and pause on your video/music player. It should purge sooner or later.
You can also hard reset your device you will find that the problem will most likely purge.
@Charcobeans: Thanks, it worked within 5 seconds Thats just the instructions I searched for. Waggling around did not work, but more precise it was easy. Thanks!
Hello,
Recently I sent my nexus one for a button replacement. I got the phone back with some strange symptoms:
- Flash light blink at random event (first boot, after I hang up a call, etc..) but cannot be controlled by software (torch and camera app in CM7, MIUI or the stock firmware). The camera however works fine.
- The ambient sensor is dead. It either reports a very high value (2600 or 5800) or a very low one (10) (these values were taken from the CM7 auto brightness adjustment settings)
- Mic from the headphone when I plug in does not work anymore (the mic works before and tested to be in working condition)
From some online research, it seems like a loose connector can cause the wonky flash light problem (report by fblodroid, he fixed it by plug the connector back)
http://www.google.com/support/forum/p/Google+Mobile/thread?tid=46ef1e3a49030ed9&hl=en
My question is: can the other two problems be related to this connectors as well? Or did I get a defective board?
I plan to fix it once the tools arrives (dealextreme takes forever!). Another option is to bring it back to the service center to get fixed (this will take a week, and who knows what kind of fees on top of that). I'd prefer to fix it if I can.
Anyone has some knowledge about this kind of issue? Any idea what do those connectors do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
popophobia said:
Hello,
Recently I sent my nexus one for a button replacement. I got the phone back with some strange symptoms:
[...]
Anyone has some knowledge about this kind of issue? Any idea what do those connectors do?
Click to expand...
Click to collapse
Dude, if your N1 is on warranty I wouldn't even bother to think what is causing this problems Send it back. You'd have o wait some time but you will still have your warranty for the future, and if you disassemble it you will probably loose it (not mentioning that your problem could be unfixable!).
They screwed up and they should fix it for free. I hate when electronics come back in worse condition after repair than before...
Well, it's out of warranty. But I think I have 3 months part warranty from the last repair.
They didn't put any seal on the screws this time. Maybe you're right, it's smarter to just send it back to get everything resolved.
I'm just curious whether all the problem described above can be attributed to the board they replaced (or one or two loose connectors).
popophobia said:
Well, it's out of warranty. But I think I have 3 months part warranty from the last repair.
They didn't put any seal on the screws this time. Maybe you're right, it's smarter to just send it back to get everything resolved.
I'm just curious whether all the problem described above can be attributed to the board they replaced (or one or two loose connectors).
Click to expand...
Click to collapse
I didn't know about the warranty, BUT: They spoiled your phone while fixing button so as a consumer you have right to demand that they fix it free of charge! Maybe it's something like silicon defect or "cold solder" (don't now if it's correct name. Google-Translated it) on the main board. They should have tried it before sending it to you.
Wish your N1 will get better soon
Hello,
I've been having problems with the touchscreen lately. Everytime it is not 'grounded' via my PC USB cable, whenever I try to put two fingers horizontally or vertically they seems to disrupt each other ie:
http://i.imgur.com/ASwFmhw.jpg
This doesn't happen when:
1. USB connected to the PC. (seems to have the best result)
2. I hold the phone with my hands and it doesn't lie on a flat surface. (still ghost touches when I align 3 or more fingers in certain position)
3. It is hooked to a decent charger with proper grounding.
Seems like there is some kind of static charge leftovers or something that disrupts the multitouch in horizontal and vertical positions. Any way to permanently get rid of such static electricity? Or is it literally 'leaking' somewhere from within the device and the only thing I can do is RMA?
People on the MIUI forums reported similar problems but only while charing the device with improper chargers.
if You have root try adding persist.usb.hvdcp.detect=true to build.prop, always take a backup before changing anything, see if that helps
SIRKRA said:
if You have root try adding persist.usb.hvdcp.detect=true to build.prop, always take a backup before changing anything, see if that helps
Click to expand...
Click to collapse
Tried, didn't work. The issues seems hardware based. The grounding of static electricity is simply broken inside the phone and there is no way to fix it other than to disassemble and see what is wrong.
Thanks anyway.
Delzor said:
Tried, didn't work. The issues seems hardware based. The grounding of static electricity is simply broken inside the phone and there is no way to fix it other than to disassemble and see what is wrong.
Thanks anyway.
Click to expand...
Click to collapse
Damn that's bad, I've solved with this line, hope You find the problem but as You point it seems like a defective touch panel :good:
I also have ghost touchs while charging AC. I've tried a lot of roms and anyone solved it. Anyway, I learned I shouldn't use the pone while charging xDD
emeuge said:
I also have ghost touchs while charging AC. I've tried a lot of roms and anyone solved it. Anyway, I learned I shouldn't use the pone while charging xDD
Click to expand...
Click to collapse
That's just a bad filtered charger, I own a 2A charger which is bad filtered, i hear the mains hum in my earbuds when connected to the phone while charging with this one, ghost touches and random taps included.
And then I have another 2 chargers, one is 1A, which came with my MI3 and the other one is a 750mA Nokia AC-20E which came with Lumia 520. None of these two make ghost touches or hum from mains. All depends on their filtration circuit quality. Try some other charger, for instance some Samsung charger and see if the phone is usable then.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The left one is the 2A "ghost touch" charger and the right one is the original charger which came with my Mi3.
Odesláno z mého MI 3W pomocí Tapatalk
SIRKRA said:
Damn that's bad, I've solved with this line, hope You find the problem but as You point it seems like a defective touch panel :good:
Click to expand...
Click to collapse
I RMA'd the phone, the technician stated that a change of the touch panel was done.
Alas, the problem persists. I specifically said that there is a grounding problem yet they only service the touch panel. I am quite furious right now.
Waited almost a month for them to do exactly nothing with it.
I too hv this issue why is it anyone knws or hv solution for it?
i m facing this problem even when phone is not connected to usb...and when i restart it problem solved for some time and then again continues ...any solutions found ? one plus one also got this problem
found temperary and good solution :
http://forum.xda-developers.com/oneplus-one/themes-apps/app-touch-screen-fixer-t3079029
Hey guys, I'm pulling my hairs out on this problem I am getting with my note 4.
Long story short - I cannot get a GPS fix (to even a single sat) with my N910T.
The longer version:
This thing had a cracked screen - but worked great before that (no GPS problems) and I used it a good year before breaking it. So I bought a N910A (ATT) note 4 to use the screen to fix my trusty note.
I gutted both phones, and put my N910T motherboard in the N910A's frame, with the screen still attached to the frame. I kept the N910A's USB daughterboard (with the charging port) because in the research I did, it seemed basically identical to the one from my broken screen frame, and I knew it would be tricky to get that out and into the new one without busting the new glass or destroying the flex cables.
So after some trouble with the S pen not working initially (the cable didn't press in fully, had to stick paper behind the flex cable and it went in properly) I was able to get the phone up and running again, and all features seemed to work great again.
However - I noticed after a couple days that the GPS was super spotty, so bad it was mostly unusable. I noticed that AGPS was on and it was using wifi and mobile data to help get a fix, so I turned it to GPS only mode. In GPS only mode the phone gets not signal whatsoever, no matter where I am.
I tried the simple fixes many recommend online, one which is to try tightening the screws a bit, and in fact, as this process continued I opened and closed up the phone several times, making sure to carefully but tightly screw all the screws back into place. That didn't help. I also tried making sure the compass calibration was good - and it made no difference. And I even factory reset to make sure there were no issues with installed apps or anything like that.
I got to thinking, perhaps its a issue with the small bendable pins that press from the motherboard into the mid-frame not making good contact, so I tore the phone down a couple more times, slightly bent out - very carefully - all the pins that press into the mid-frame to make them all have a solid contact, and even tried to get any corrosion or debris from the pads on the mid-frame. I even made sure there was contact for those little ones alone the sides of the phone which seem to have something to do with the buttons rather than what I'm dealing with.
Still no luck, so I tried doing a NV rebuild, which I read might solve getting 0 sat fixes, and discovered my phone wouldn't let me into that menu of the service options, so I had to install root and then do it through shortcut master instead. Once I finally was able to get to the menu and run the NV rebuild.... nothing changed.
So I am fresh outta ideas, and I'm thinking that A) that ATT USB daughterboard actually plays a part in GPS somehow and I need to take my TMO one out of the old phone and put it in the new frame and screen.... or B) Something is damaged on my motherboard.... or C) Somebody out there has a better solution
Any ideas, experiences of what worked are all appreciated!
BUMP --------
Still having this issue. Tried opening it up, and realllllly making sure those antenna springs are making contact, and I made sure the contacts on the mid frame are clean.
I tried TopNTP and that made no difference. Here is an image of whats going on when I run GPS Test:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bump?
Losing hope for my old phone here
Anybody happen to know if the daughter board that has the USB charging port plays any role in gps?