is there a fix without changing screens
Related
Ok so i took apart my N1 to clean the notorious dust from under the screen and wiped down the amoled screen and the back of the touch screen, seems to be going good...... well when i put it back together and turn it on (it turns on ok and display works) the touch screen dont work anymore, the light sensor does work and the soft keys work, and the track ball works just not the touch screen!! I did a clean install of cm6.1 to see if that would do the trick but no luck. im pretty sure i might have rubbed the tiiiiiny grid of wires under the digitizer the wrong way and broke some of them apart cause the light sensor and proximity sensor still work. Ok my question is how do i get past the set up screen and go straight to the home screen with no touch screen and only a track ball??? I can set it up to where i can trackball to wake instead of needing the swipe screen to wake?? Please tell me how i can bypass the set up screen, Thank you.
Ryanmcleod1 said:
Ok so i took apart my N1 to clean the notorious dust from under the screen and wiped down the amoled screen and the back of the touch screen, seems to be going good...... well when i put it back together and turn it on (it turns on ok and display works) the touch screen dont work anymore, the light sensor does work and the soft keys work, and the track ball works just not the touch screen!! I did a clean install of cm6.1 to see if that would do the trick but no luck. im pretty sure i might have rubbed the tiiiiiny grid of wires under the digitizer the wrong way and broke some of them apart cause the light sensor and proximity sensor still work. Ok my question is how do i get past the set up screen and go straight to the home screen with no touch screen and only a track ball??? I can set it up to where i can trackball to wake instead of needing the swipe screen to wake?? Please tell me how i can bypass the set up screen, Thank you.
Click to expand...
Click to collapse
You can always get a new digitizer from here...http://www.htcrepairparts.com/htc-nexus-one-htc-passion-c-129_677.html?language=en
I have already replaced the digitizer before and dont wanna go through that again. I just wanna bypass the setup screen and be able to use the trackball as a temporary solution till i get a new phone.
Dear all,
I used to have sg2 the screen touch sensitivity was great; but with the p880 i with my screen I think is not correct.
The touch bottons back and menu are not shine like home, and sometimes the touch is not really accurate when i press. I try to calibrate the screen with NSR (nook screen recalibrate) without results, also try the hidden menu test and is a little laagy for the touch.
i flash cm the same results, reflash the jb and the same.
Maybe some tweak, will fix the problem???
Any idea of the problem??
Thanks!
Hi,
My Screen became black suddenly but my touch working.
I tried another lcd same result.
Any idea which part should make this problem?
BR
I have a problem. I changed the display module. But now when installing cm 12,13,14 there is a problem. If you lock and unlock the display will be black screen. The screen works but there is no backlight. I think the whole thing in the nucleus. Maybe there is no driver for the non-original display
Recently my screen started blacking out every time I touch it. It stays black until I stop touching the screen. The backlight stays on but the LCD does not. I've tried messing around with settings but I haven't found a way to fix it. Any suggestions would be greatly appreciated.