mi a2 device was putting the ROM of MI6X, so right now my phone is completely closed. now only pc recognize (qualcomm hs-usb qdloader 9008) What can be ok? plz halp........
are you able to access the fastboot mode?
The only way I know of is EDL test point, there's a Mi A1 guide and should applicable to Mi A2 as well.
Next time don't do this, flash an A-only rom on an A/B device never end well.
Never_Sm1le said:
The only way I know of is EDL test point, there's a Mi A1 guide and should applicable to Mi A2 as well.
Next time don't do this, flash an A-only rom on an A/B device never end well.
Click to expand...
Click to collapse
mi flash error
bkdas said:
mi flash error
Click to expand...
Click to collapse
Did you follow the EDL test point method?
bkdas said:
mi flash error
Click to expand...
Click to collapse
follow this guide exactly 100%
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Never_Sm1le said:
Did you follow the EDL test point method?
Click to expand...
Click to collapse
yes. error plz give me any other EDL test point method
sorry my bad english
KevMetal said:
follow this guide exactly 100%
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Click to expand...
Click to collapse
No now try this
bkdas said:
yes. error plz give me any other EDL test point method
sorry my bad english
Click to expand...
Click to collapse
I have a feeling you don't know what EDL test point means because there's only 1 way to do it. It is the method that @KevMetal suggested, however replace the Mi 6X with Mi A2 rom or your phone gonna brick again.
thanks for helping
Never_Sm1le said:
I have a feeling you don't know what EDL test point means because there's only 1 way to do it. It is the method that @KevMetal suggested, however replace the Mi 6X with Mi A2 rom or your phone gonna brick again.
Click to expand...
Click to collapse
O my good finaly ...... thank you very vrey much
bkdas said:
O my good finaly ...... thank you very vrey much
Click to expand...
Click to collapse
sir one more help plz. how to back android one stock?
KevMetal said:
follow this guide exactly 100%
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Click to expand...
Click to collapse
thanks for helping . now anti rool back 4 so how to back android one
bkdas said:
thanks for helping . now anti rool back 4 so how to back android one
Click to expand...
Click to collapse
You can't . Only use custom ROM or miui ...you can use android 1 system image for treble if you want that ...BUT NEVER AGAIN ANDROID 1 BY FLASHING WITH MIFLASH OR BLACK EDL BRICK ..
Hey, I have a question. I have a bricked mia2 bought nearly 2019. I rooted successfully using magisk method, at that time there is no more tutorial about how to root the device. At the middle of of 2019 my device got bootlooped and there is no more tutorials for unbricking the device. Only the device showing is 9008 mode.. tried different methods and tutorials but nothing works for me. Does the 6x method works for me? Bcoz some says the hrdwre of mi a2 and 6x are the same.
Related
Mi 8 Stuck in Recovery Mode "this miui version cannot be installed on this device"
Hello there,
i have some problem with my Mi 8. After flashing from Miui 9.5 to Miui 10 my phone became bootloop in recovery mode.
my device now locked.
i've allready try test point method but when try to flash china rom in Mi flash tool but get the notification error.
my xiaomi account not authorized.
when im try to UBL with miflash unlock, stuck in 99% with notif "Current account is not bound to this device"
can anyone help me?
thx
yhnjuve said:
Hello there,
i have some problem with my Mi 8. After flashing from Miui 9.5 to Miui 10 my phone became bootloop in recovery mode.
my device now locked.
i've allready try test point method but when try to flash china rom in Mi flash tool but get the notification error.
my xiaomi account not authorized.
when im try to UBL with miflash unlock, stuck in 99% with notif "Current account is not bound to this device"
can anyone help me?
thx
Click to expand...
Click to collapse
I believe to flash back to China Rom which version is less than 9.5.17 or should I say the ROM without rollback enabled is prohibited by Xiaomi unless you have the EDL Authorization access in your account. I'm not sure how to get this EDL authorization. People are saying that if you have this EDL authorization you may flash to any rom. If I'm wrong, please do correct me.
Sorry to say, but I see hundreds of reports the last days about bricked phones.
Mostly about the Xiaomi redmi note 5 pro and the Xiaomi Mi 8.
Xiaomi doesn't want to give authorization for edl. so sorry to say but you can trow your phone in the trash bin.
Nothing will solve your problem due Xiaomi policy, u can't repair your phone it useless.
Xiaomi official statement is buy our products in your region.
You should have flashed a Xiaomi.eu rom. They are completely translated, without any China stuff and aren't as aggressive when it comes to flashing things alongside the kernel and system ( for example, you get to keep TWRP even after the flash, unlike pure stock ).
A lot of people mentioned an EDL account but you have to wait for a decent amount of time to get approval from Xiaomi. Don't throw your phone away like the guy above said. xD
yhnjuve said:
Hello there,
i have some problem with my Mi 8. After flashing from Miui 9.5 to Miui 10 my phone became bootloop in recovery mode.
my device now locked.
i've allready try test point method but when try to flash china rom in Mi flash tool but get the notification error.
my xiaomi account not authorized.
when im try to UBL with miflash unlock, stuck in 99% with notif "Current account is not bound to this device"
can anyone help me?
thx
Click to expand...
Click to collapse
di u still have twrp recovery or factory recovery
-fluffy- said:
di u still have twrp recovery or factory recovery
Click to expand...
Click to collapse
no, i dont have it
yhnjuve said:
no, i dont have it
Click to expand...
Click to collapse
Hi, I have the same problem...
Did you find any solution ??
Thanks in advance.
Marino1982 said:
Hi, I have the same problem...
Did you find any solution ??
Thanks in advance.
Click to expand...
Click to collapse
Can you try this, please? It may work for you.
Has anyone tried to install the rom china developer with Chinese PC Suite 3.0? Being a newer version, you should let it install.
Berni_Werni said:
Has anyone tried to install the rom china developer with Chinese PC Suite 3.0? Being a newer version, you should let it install.
Click to expand...
Click to collapse
I tried and it did not work:crying:
I managed to hard brick my phone by trying to fastboot flash miui 10 on a miui 11 . So i had to open the back and use test point to get to edl mode. But now i cannot flash it using Miflash without authorized account. Can anybody graciously help me with that? I Thank you
wasiur901 said:
I managed to hard brick my phone by trying to fastboot flash miui 10 on a miui 11 . So i had to open the back and use test point to get to edl mode. But now i cannot flash it using Miflash without authorized account. Can anybody graciously help me with that? I Thank you
Click to expand...
Click to collapse
How did you manage to get it in edl test point, could you please post a picture on the pins I've been trying for a week with various pins I haven't been able to identify test points on the mi 9
samouraty said:
How did you manage to get it in edl test point, could you please post a picture on the pins I've been trying for a week with various pins I haven't been able to identify test points on the mi 9
Click to expand...
Click to collapse
Try this if you have not already tried.
https://forum.xda-developers.com/Mi-9/help/want-to-unbrick-mi9-wiht-testpoint-to-t3924267/page2
Good luck
Clarkie_955i said:
Try this if you have not already tried.
https://forum.xda-developers.com/Mi-9/help/want-to-unbrick-mi9-wiht-testpoint-to-t3924267/page2
Good luck
Click to expand...
Click to collapse
Thanks already tried this one no luck i will try again though, did it work work with you? Regarding the authorized account, there is a special nlock tool which i saw some videos that it can bypass the authorization see below link might help you.
httpss://www.google.com/amp/s/romprovider.com/2019/07/download-xiaomi-auth-tool-bypass-authenication/amp/
samouraty said:
Thanks already tried this one no luck i will try again though, did it work work with you? Regarding the authorized account, there is a special nlock tool which i saw some videos that it can bypass the authorization see below link might help you.
httpss://www.google.com/amp/s/romprovider.com/2019/07/download-xiaomi-auth-tool-bypass-authenication/amp/
Click to expand...
Click to collapse
Never tried it. Pretty sure there was a couple of people offering EDL accounts on here with team viewer. Or have a look on Xiaomi eu site .
wasiur901 said:
I managed to hard brick my phone by trying to fastboot flash miui 10 on a miui 11 . So i had to open the back and use test point to get to edl mode. But now i cannot flash it using Miflash without authorized account. Can anybody graciously help me with that? I Thank you
Click to expand...
Click to collapse
I too would very much like to see how you managed to get it in edl test point, so as others here I too would ask you to please post a picture on the pins! Thank you!
hi guys i have k20 pro raphaelin and yesterday i was downgrade from 12.5.1 to 12.0.5 and in the middle of flashing rom the power is off and right now my phone totally dead no fast boot no recovery dead is there any help ?
Dead as in What kind of Dead? Because if it's in Dead as Physically Dead, then it's............Dead. But if as in Logically Dead, then give specific informations!
LinhBT said:
Dead as in What kind of Dead? Because if it's in Dead as Physically Dead, then it's............Dead. But if as in Logically Dead, then give specific informations!
Click to expand...
Click to collapse
my pc can't feel the phone anymore even on adb i try to do test point On the board but some people tell me i need mi account authorization to flash the device
vip20109 said:
my pc can't feel the phone anymore even on adb i try to do test point On the board but some people tell me i need mi account authorization to flash the device
Click to expand...
Click to collapse
When the PC does not recognize the device, there're few reasons for that. And doing the testpoint trick is the last you should try. But since u already opened the device, use QFIL to flash the stock into the device. For Xiaomeme devices which released from 2020 till now, yes, you must have Authenicated Mi acc in order to flash in EDL mode. But Raphael is released in 2019, then you still can do it, only that even u don't need Auth Mi Acc, but still need an Auth firehose prog in order to flash, and luckily, this can be more easier to find.
So, let's hope that your device is not ded as in ........ ded ))))))))))))))))))
LinhBT said:
When the PC does not recognize the device, there're few reasons for that. And doing the testpoint trick is the last you should try. But since u already opened the device, use QFIL to flash the stock into the device. For Xiaomeme devices which released from 2020 till now, yes, you must have Authenicated Mi acc in order to flash in EDL mode. But Raphael is released in 2019, then you still can do it, only that even u don't need Auth Mi Acc, but still need an Auth firehose prog in order to flash, and luckily, this can be more easier to find.
So, let's hope that your device is not ded as in ........ ded ))))))))))))))))))
Click to expand...
Click to collapse
ty for help after 2 weeks my friend help me with UFI dongle to flash the room file by file again oof !
Hey guys. I have a question that has been bothering me for a long time.I just followed the tutorial correctly.Then no matter what, it is always stuck in fastboot mode.can someone help me.Thanks
Thread '[GUIDE] HOW TO INSTALL GSI CUSTOM ROMS ON REDMI NOTE 10 5G/POCO M3 PRO 5G' https://forum.xda-developers.com/t/...s-on-redmi-note-10-5g-poco-m3-pro-5g.4346983/
tutorial here
I'm sure I did it right
But he is either adb error that the partition size is not enough or stuck in fastboot mode
AriesLinux said:
Thread '[GUIDE] HOW TO INSTALL GSI CUSTOM ROMS ON REDMI NOTE 10 5G/POCO M3 PRO 5G' https://forum.xda-developers.com/t/...s-on-redmi-note-10-5g-poco-m3-pro-5g.4346983/
tutorial here
I'm sure I did it right
But he is either adb error that the partition size is not enough or stuck in fastboot mode
Click to expand...
Click to collapse
did you try reinstalling miui then. the vbmeta fix i suggested in inside this thread? it help me fixed fastboot move
brian00009 said:
did you try reinstalling miui then. the vbmeta fix i suggested in inside this thread? it help me fixed fastboot move
Click to expand...
Click to collapse
I tried reinstalling MIUI. But still doesn't work. I don't think it will work in MIUI 12.5.2
brian00009 said:
did you try reinstalling miui then. the vbmeta fix i suggested in inside this thread? it help me fixed fastboot move
Click to expand...
Click to collapse
Too bad. Sometimes adb also gives error that partition a does not have enough size
adb???? flash using miflash. or another tool. this error mean u have damaged partions table. if you follow the guides u dont recive any error. works fine for miui 12.5.2 and any other version. but i think u didnt follow the guides with attention.
wetito said:
adb???? flash using miflash. or another tool. this error mean u have damaged partions table. if you follow the guides u dont recive any error. works fine for miui 12.5.2 and any other version. but i think u didnt follow the guides with attention.
Click to expand...
Click to collapse
ok I will try MIUI 12.5.2
wait for my message
AriesLinux said:
wait for my message
Click to expand...
Click to collapse
Any results here? Got similar problem after recent update. Chinese version on Global ROM. Bootloader locked. Dunno what to do
Timenator said:
Any results here? Got similar problem after recent update. Chinese version on Global ROM. Bootloader locked. Dunno what to do
Click to expand...
Click to collapse
okey. Please keep calm. Can you speak Chinese? Because I noticed that you can use Chinese.
AriesLinux said:
okey. Please keep calm. Can you speak Chinese? Because I noticed that you can use Chinese.
Click to expand...
Click to collapse
Regretfully, no. But I had already solved the problem. Thanks for support
GSI does not fit, brush another GSI variant version
It is recommended to follow the official tutorial
小米社区
web.vip.miui.com
Phone boot successfully, use normal, and then brush GSI according to the tutorial
Good luck, private message me, you can communicate in Chinese, I English by deepl translation
祝你好运，私信我，可以中文交流的，我英文靠deepl翻译的
jianjianus said:
GSI does not fit, brush another GSI variant version
It is recommended to follow the official tutorial
小米社区
web.vip.miui.com
Phone boot successfully, use normal, and then brush GSI according to the tutorial
Good luck, private message me, you can communicate in Chinese, I English by deepl translation
祝你好运，私信我，可以中文交流的，我英文靠deepl翻译的
Click to expand...
Click to collapse
so you have succesfully flashed a chinese miui over global miui? if you have do this, it's a good report for all users that said this is impossible. great.
wetito said:
so you have succesfully flashed a chinese miui over global miui? if you have do this, it's a good report for all users that said this is impossible. great.
Click to expand...
Click to collapse
My phone is the Chinese version（Redmi Note 10 5G and Redmi Note 11 SE
）, but miui global version also brushed, some of the old firmware can be brushed, you can enter the desktop, but part of the existence of 4G5G signal is weak, or even no signal, some have a signal but no sound to call. So brush the correct miui firmware is important
His problem is mainly manifested in the GSI problem.
hey there, i need help. I got my Redmi note 10 pro hard bricked while flashing xiaomi.eu rom. Bootloader is unlocked. please help me to unbrick my hard bricked phone.
Use Xiaomi official flash tool to flash the official firmware again
carlito-lt26i said:
Use Xiaomi official flash tool to flash the official firmware again
Click to expand...
Click to collapse
I have tried but its not working. saying hello package/packet not found.
Can you get into fastboot mode
Ashle said:
Can you get into fastboot mode
Click to expand...
Click to collapse
no it is showing black screen only.
usman-qasim said:
hey there, i need help. I got my Redmi note 10 pro hard bricked while flashing xiaomi.eu rom. Bootloader is unlocked. please help me to unbrick my hard bricked phone.
Click to expand...
Click to collapse
You've tried to boot in recovery with hardware buttons?
Laptapper said:
You've tried to boot in recovery with hardware buttons?
Click to expand...
Click to collapse
Yes but no response
usman-qasim said:
Yes but no response
Click to expand...
Click to collapse
Go on with edl
How To Boot Xiaomi Smartphones Into EDL Mode - Comprehensive Guide - XiaomiFix
... Read More
xiaomifix.com
Hello, I have the device in edl, i need an authorized account and I have not been able to flash, using the xiaomi pro tools it asks me for some credits, but I do not know how to acquire them, I also looked at a filehorse, patched file, but I have been searching for 2 days and I have not been able to find. I really appreciate your help I really need my phone. hellpp!! jaja
palu2022 said:
Hello, I have the device in edl, i need an authorized account and I have not been able to flash, using the xiaomi pro tools it asks me for some credits, but I do not know how to acquire them, I also looked at a filehorse, patched file, but I have been searching for 2 days and I have not been able to find. I really appreciate your help I really need my phone. hellpp!! jaja
Click to expand...
Click to collapse
Try this
XIAOMIAUTHTOOL - Home
xiaomiauthtool.net
Or
New - Xiaomi Fire Tool | Mi Account Fastboot To EDL Auth Mobile Flashing Tool
Xiaomi Fire Tool Supported all models MediaTek + Qualcomm Xiaomi Fire Tool v1.0 is a small tool for Windows computers. it allows users to bypass or unlock mi account from all Xiaomi devices. you can unlock or flash all devices which come with MediaTek and Qualcomm base CPU. for more information...
www.martview-forum.com
Thanks, but i need buy credits