I had converted my Mi A2 into 6x but i forgot to delete Firmware Update folder. Now i'm using Pixel Experience Rom based on 6X.
Is it possible to go back Mi A2? (Without Opening Phone Backpart
Oline1032 said:
I had converted my Mi A2 into 6x but i forgot to delete Firmware Update folder. Now i'm using Pixel Experience Rom based on 6X.
Is it possible to go back Mi A2? (Without Opening Phone Backpart
Click to expand...
Click to collapse
open fastboot :
fastboot getvar all
there will be a bunch of info ...if the ARB number is higher than 4 the answer is NO
fyi: you can enter edl from fastboot or twrp custom recovery if your phone is in working order .. shorting the pins ( test point) by opening phone physically only becomes necessary if your phone is bricked
open fastboot :
fastboot oem edl
***something to consider is you can't just flash an android 1 rom ...you need to download the repartition script to repartition your partition layout or all attempts will fail
Related
I Flashed Mi 6x rom in my Mi a2. I dont know what happened.
The camera was staying black screen. I flash stock rom to fix. But come problem. The stock rom not fix the issue.
I discovered all my sensors no enable.
How to fix this? What i can do?
I have this problem now. Did you ever find a solution?
If you are allready converted to 6X and have TWRP do this:
-boot to TWRP
-connect your phone to PC and copy persist.img from stock MIUI 9 ROM used to convert to A2 to 6X
-In TWRP go to Install, then Intall Image, navigate to your persist.img and Select Partition to Flash Image: Persist
-After flash, reboot to System and now your all sensors should work
I have attached persist.img so You can use this one...
Mr.Nice.ba said:
If you are allready converted to 6X and have TWRP do this:
-boot to TWRP
-connect your phone to PC and copy persist.img from stock MIUI 9 ROM used to convert to A2 to 6X
-In TWRP go to Install, then Intall Image, navigate to your persist.img and Select Partition to Flash Image: Persist
-After flash, reboot to System and now your all sensors should work
I have attached persist.img so You can use this one...
Click to expand...
Click to collapse
Is fingerprint fast as original? Because I convert a2 to 6x but the fingerprint sensor was very slow.
FP sensor is working perfectly, precise, fast, face unlock instantly also. I am curently on MIUI 10 latest from xiaomi.eu and everything is fast and fluid.
Thank you i think it worked.
Mr.Nice.ba said:
If you are allready converted to 6X and have TWRP do this:
-boot to TWRP
-connect your phone to PC and copy persist.img from stock MIUI 9 ROM used to convert to A2 to 6X
-In TWRP go to Install, then Intall Image, navigate to your persist.img and Select Partition to Flash Image: Persist
-After flash, reboot to System and now your all sensors should work
I have attached persist.img so You can use this one...
Click to expand...
Click to collapse
@Mr.Nice.ba thanks...
I had convert A2 to 6X my sensor not working.
But now all working fine.
Camera +sensor
thanks
I'm using CrDroid PIE 6X
Mr.Nice.ba said:
If you are allready converted to 6X and have TWRP do this:
-boot to TWRP
-connect your phone to PC and copy persist.img from stock MIUI 9 ROM used to convert to A2 to 6X
-In TWRP go to Install, then Intall Image, navigate to your persist.img and Select Partition to Flash Image: Persist
-After flash, reboot to System and now your all sensors should work
I have attached persist.img so You can use this one...
Click to expand...
Click to collapse
Thank you so much, you saved my life :laugh::good:
No welcome
Sent from my MI 6X using Tapatalk
help!!
edinunes said:
@Mr.Nice.ba thanks...
I had convert A2 to 6X my sensor not working.
But now all working fine.
Camera +sensor
thanks
I'm using CrDroid PIE 6X
Click to expand...
Click to collapse
what recovery did you use and persist.img? can you share both, been having trouble finding a recovery that can flash persist.img, i have a few persist.img dont know wich one to use after i get a good recovery to flash it. please help, been trying this these last few days, loosing hope
---------- Post added at 09:49 PM ---------- Previous post was at 09:43 PM ----------
Mr.Nice.ba said:
If you are allready converted to 6X and have TWRP do this:
-boot to TWRP
-connect your phone to PC and copy persist.img from stock MIUI 9 ROM used to convert to A2 to 6X
-In TWRP go to Install, then Intall Image, navigate to your persist.img and Select Partition to Flash Image: Persist
-After flash, reboot to System and now your all sensors should work
I have attached persist.img so You can use this one...
Click to expand...
Click to collapse
what twrp version did you use, can u send me link to it? ive been trying a few and some dont let me flash it because there is no persist partition, others have the option but give error. i would really appreciate the help.
Try this twrp, persist.img is already uploaded a few posts above...
https://drive.google.com/file/d/1tuKVM5c8r_5fDZIcaua0AYU2OqXVfHn0/view?usp=drivesdk
Thanks, ive figured it out
Mr.Nice.ba said:
Try this twrp, persist.img is already uploaded a few posts above...
https://drive.google.com/file/d/1tuKVM5c8r_5fDZIcaua0AYU2OqXVfHn0/view?usp=drivesdk
Click to expand...
Click to collapse
Is this for mi 6x or for mi a2? I need yo flash persist to my mi a2 i can't find twrp that can flash persist
6X or A2 converted to 6x.
Sent from my MI 6X using Tapatalk
Mr.Nice.ba said:
6X or A2 converted to 6x.
Sent from my MI 6X using Tapatalk
Click to expand...
Click to collapse
So 6x only
Shotg1 said:
Is this for mi 6x or for mi a2? I need yo flash persist to my mi a2 i can't find twrp that can flash persist
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/help/flashablepersistmia2-t3968543
Guys, I can't solve the problem using this method with Mi 6x on MIUI 11, it only works on MIUI 10. I searched persist.img on rom MIUI 11 beta but I couldn't find it. How do I solve this problem using MIUI 11?
rafaeimarques said:
Guys, I can't solve the problem using this method with Mi 6x on MIUI 11, it only works on MIUI 10. I searched persist.img on rom MIUI 11 beta but I couldn't find it. How do I solve this problem using MIUI 11?
Click to expand...
Click to collapse
after i got miui 10 i sticked with it until miui 11 was launched, i just upgraded it and all still worked good!!! now im currently using pixelexperience 10, all is still good, i never again touched the persist
I am also using Pixel Experience 10 and I am no longer with this problem. PE already comes with API2 enabled, so I don't think it corrupts the persist partition.
My Mi a2 was converted to Mi 6x and trapped on arb4.
I have tried flashing Mi a2 ROMS, but failed. it ends up with errors in twrp (I booted Mi a2 twrp).
Is it possible to flash Mi a2 ROMS on converted Mi 6x?
stevedat said:
My Mi a2 was converted to Mi 6x and trapped on arb4.
I have tried flashing Mi a2 ROMS, but failed. it ends up with errors in twrp (I booted Mi a2 twrp).
Is it possible to flash Mi a2 ROMS on converted Mi 6x?
Click to expand...
Click to collapse
No, you have to flush only the 6x rums, and watch the arb Now that exists in Pixel Expiriencu!
alenaki123 said:
No, you have to flush only the 6x rums, and watch the arb Now that exists in Pixel Expiriencu!
Click to expand...
Click to collapse
1st time I converted to mi 6x, I was able to flash A2 ROM that I just needed to push a2 twrp then flash.
Since I got arb4, it becomes trouble in flashing mi a2. so, I am supposing it is the cause.
anyway, anyone has any idea or found a solution, please share.
thanks
stevedat said:
1st time I converted to mi 6x, I was able to flash A2 ROM that I just needed to push a2 twrp then flash.
Since I got arb4, it becomes trouble in flashing mi a2. so, I am supposing it is the cause.
anyway, anyone has any idea or found a solution, please share.
thanks
Click to expand...
Click to collapse
tri reflash with mifles stock mi a2 fimware
alenaki123 said:
tri reflash with mifles stock mi a2 fimware
Click to expand...
Click to collapse
Arb4 means no ways back as far as I know
ARB 4 has no solution!! (and i think will not have...)
I'm on this boat and the best solution (for me) is flashing the Havoc 2.5 for Mi 6x (wayne), the best ROM based on Android One
Use edl mode to flash back to stock. Edl wont judge you for being in arb or even when hard brick
So i've got Mi a2 device and from the last week it has a brighter screen sections, around whole display (looks similar to the p20pro glue gate). So i decided to send it to the Amazon, but currently I am using the PixelOs ROM, so I need to flash it back to stock Rom, and then lock bootloader. The problem is, that I can't flash it via MI Flash (device error, or smth like that, all device tools doesn't work at all too), and when I wanted to just Flash it in TWRP I recognized that's support only .zip files and the Rom is in a diffrent format. Last time, I did ,,big back to the stock rom action" I found a website, with the commands, that allows you to flash it with GZ file, and Minimal ADB and Fastboot, but I just Can't find it now (Thanks Google), so I'm asking here: How can I back to the stock rom using Twrp only (or command prompt ofc).
Convert Back to A2
Download latest a2 stock rom.
Put phone to edl mode again (fastboot oem edl)
Flash stock rom via QFİLL with same method (Select .ddr and xml files from stock rom folder) and power up.
Done.
(If you have wifi camera or splash screen problems. Flash stockrom with miflash on fastboot (vol down + power ) again.)
Click to expand...
Click to collapse
QFILL you can find and all other stuff in this post: xda-developers /Xiaomi Mi A2/ Xiaomi Mi A2 Guides, News, & Discussion / [GUIDE] Convert Mi A2 to Mi 6X [MIUI 10 Oreo] [MIUI 10 Pie] by akshayakakat.
Works like a charm.
MendaciumRR said:
QFILL you can find and all other stuff in this post: xda-developers /Xiaomi Mi A2/ Xiaomi Mi A2 Guides, News, & Discussion / [GUIDE] Convert Mi A2 to Mi 6X [MIUI 10 Oreo] [MIUI 10 Pie] by akshayakakat.
Works like a charm.
Click to expand...
Click to collapse
Thansk ! It worked, and was super easy to use, one of the best tool i've ever seen <3
Hello,
i have just received a 6x that has MIUI 9.5 installed on it
i want to convert it to A2 but i have never done this before, it is reporting anti: 2 which i guess is good since it is not 4
what are the steps to convert it ? the mobile is stock
EDIT:
can i install the below rom from xiaomi.eu ?
xiaomi.eu_multi_MI6X_V10.3.5.0.PDCCNXM_v10-9.zip
A2 -> 6X -> yes
6X -> A2 -> no
puxxi2004 said:
A2 -> 6X -> yes
6X -> A2 -> no
Click to expand...
Click to collapse
can i install this ?
xiaomi.eu_multi_MI6X_V10.3.5.0.PDCCNXM_v10-9.zip
i have already applied for Unlock through Mi software and waiting for the 7 days to pass
That`s not true.
I didn`t try it, because there`s no reason for that, but this is how to put back from 6X to A2
To restore everything back to A2, do the same thing, just use the original stock with en.miui.com for A2 for flash ROMs. Flashing for the first time from EDL, then once again from the fastboot to restore the fastboot properly. After the first flash, you do not have a logo for fastboot, just a black screen. To put it all in its place, another flash is miflash but from fastboot.
Credits to @Mr.Nice.ba
EDIT: I`m sorry. I was think that You was convert your A2 to 6x, and You want to bring it back to A2.
You can try it. Since the anti-rollback still not activated (anti 2), you can just flash your device to Mi A2 with MiFlash. Use official stock ROM Mi A2 and put your device in EDL mode, then just flash it like usual.
hasel17 said:
You can try it. Since the anti-rollback still not activated (anti 2), you can just flash your device to Mi A2 with MiFlash. Use official stock ROM Mi A2 and put your device in EDL mode, then just flash it like usual.
Click to expand...
Click to collapse
His bootloader will change to the A2? or he will still have a 6X bootloader?
Well, friends ... this is it.
I converted my Mi A2 to Mi 6x and everything was working fine. One day I decided to return my smartphone to the factory system, but unintentionally deleted all files within TWRP. Now I have the following dilemma:
I can get into TWRP and fastboot, but when trying to install any ROM by MI Flash (Jasmine_Spout or Wayne) the program says "Can not read from port COM *).
Can someone help me?
PS: Forgive me, I'm from Brazil and I'm using the translator to write this text.
Hi there, you can revert back to Mi A2 using Qfill or mi flash 2016 64 bit in edl mode, see this thread for details:
https://forum.xda-developers.com/mi-a2/how-to/guide-convert-mi-a2-to-mi-6x-t3896802