Database Develop

[GUIDE] Root And TWRP Recovery for SM-J530F

Hi all ...
Today i show you how Root And TWRP Recovery for SM-J530F without any Problem
Part 1 : Root
ENABLE OEM UNLOCK and usb development
Note : all you data we will delete all Make sure take Backup !!
a) Download CF-Auto-Root from this link : https://download.chainfire.eu/1135/...y17lte-j5y17ltexx-smj530f.zip?retrieve_file=1
b) Flash with ODIN 3.10.7 in the AP slot.
c) Put your device in DOWNLOAD mode.
d) Load the CF-Auto-Root-j5y17lte-j5y17ltexx-smj530f.tar.md5 file below into the AP slot and hit start.
e) waiting finish, after finish you will see message ( you device is problem press Erase to fix ) press Erase and wait for Erase all data
F) after reboot,, again start in option " C "
g) Now after again Load the CF-Auto-Root file below into the AP slot and hit start. ,,, waiting finish and device is working again ,, you will see SuperUser
Congratulations !!
Now you can flash TWRP recovery form here :
https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
Jest only do this :
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
this is all ,, Sory for bad English
​

Hi, can anyone confirm that this instructions works

SM-J530F/DS
Confirmed working! Thanks @Abdullah_a86 :good:

Twrp install errors
So, i flashed the twrp with odin after enabling 2 things in developer options .
Good, i entered the TWRP menu from phone and formated data , after that when i was trying to install the Magisk Root it always show errors like:
E: TOUCH_DRAG (or HOLD or REPEAT or RELEASE): and 2 numbers here like 575,1000 (example)
Please help me.
The phone is working but i think twrp is broken idk please help.
Thanks

Thanks!

who can, adapt to SM-J530FM recovery ???
(FM - version)

Does it work on the dual sim model?
Does it work on J530F/DS? The dual sim model, thanx in advance

Not working -- UNSTABLE !!!
Yesterday I've followed this root guide to root my J530F (NOT Pro-edition, NOT dual sim) and it worked great but for short time. The first root app I've installed is "Root Checker" to confirm that root is installed correctly - and it was. Then I was installing "Lucky Patcher" app and there was no prompt for root access from SuperSU. I went back to "RootChecker" it was telling me that my root is not available.
Then I rebooted my phone and I got famous Samsung "Black screen of death" - J5 logo appears and then blank, nothing on the screen. I got in Download mode without a problem, re-flashed my firmware (AP) and works fine.
Now it feels stupid, while I triggered KNOX to 0x1 and I don't have a root. I haven't tried this TWRP recovery because I'm afraid that it won't work and that I'll have to format my phone again and start from the beggining.
It is very important that you guys share your experience, so the other knows if this is working or not.
Anyone tried this custom TWRP Recovery???

in my Experience the best way to root j530f is trwrp+ refined kernel

wetito said:
in my Experience the best way to root j530f is trwrp+ refined kernel
Click to expand...
Click to collapse
Can you confirm that TWRP recovery from the first post is working?
Thanks!

Yes it works

wetito said:
Yes it works
Click to expand...
Click to collapse
I've just tried to install TWRP over stock firmware (not rooted) and I got bootloop. I can enter TWRP, but Android can't start. I guess I will wait for some time while stable custom recovery is released. I use this phone everyday, so I can't deal with all of these problems...
In my case root and recovery from this post is not working.
Hope there will be official solution soon.
Thanks!

Guys, someone please help, i have J5 PRO 2017 SM-J530G, i did a search on all XDA and did not found twrp for my model "G", found only for models Y and F, so i must ask if that version exists, and where i can find it ! Second question would be, if i can't find one especifically for G model, if i can use Y or F model of twrp ! thanks in advance for someone that can help !

NeleRS said:
I've just tried to install TWRP over stock firmware (not rooted) and I got bootloop. I can enter TWRP, but Android can't start. I guess I will wait for some time while stable custom recovery is released. I use this phone everyday, so I can't deal with all of these problems...
In my case root and recovery from this post is not working.
Hope there will be official solution soon.
Thanks!
Click to expand...
Click to collapse
Same problem in my case.

Hi. I have problems with the Google Assistant after rooting it. It stucks after telling it a command and suddenly crashes. Why does anything to do this with the root? Google Assistant and root haven't any relationship!!! I also have problems with an app called HelloTalk because it stucks in the chat screen too.
I had to flash my phone back to Stock ROM, because it gets stable again.
Thank you!
Enviado desde mi SM-J530F mediante Tapatalk

JaviLukiOficial said:
Hi. I have problems with the Google Assistant after rooting it. It stucks after telling it a command and suddenly crashes. Why does anything to do this with the root? Google Assistant and root haven't any relationship!!! I also have problems with an app called HelloTalk because it stucks in the chat screen too.
I had to flash my phone back to Stock ROM, because it gets stable again.
Thank you!
Enviado desde mi SM-J530F mediante Tapatalk
Click to expand...
Click to collapse
try root with magisk 14.0 and choose hide magisk

Abdullah_a86 said:
try root with magisk 14.0 and choose hide magisk
Click to expand...
Click to collapse
Where can I find the Magisk 14.0 patch for this phone model? I've never used this Root Manager.
Enviado desde mi SM-J530F mediante Tapatalk

JaviLukiOficial said:
Where can I find the Magisk 14.0 patch for this phone model? I've never used this Root Manager.
Enviado desde mi SM-J530F mediante Tapatalk
Click to expand...
Click to collapse
How to Install Magisk Latest Version 15.0 on Android [Non-Rooted Phones]
Download and install the Magisk v15 zip file from here:
http://magiskmanager.com/Magisk/Magisk-v15.0.zip
Place the zip file in your internal storage. Make sure that you remember the proper location of the zip file.
Reboot your phone into recovery ensure that you have a custom recovery such as TWRP is installed on your phone.
Now, click on the Install button in the TWRP recovery.
Download Magisk Manager
Navigate the Magisk-v15.zip on your internal storage or SD card.
Download Magisk Manager
Now, install the zip file on your device and wait till it is getting installed on your device.
Download Magisk Manager
You have successfully flashed the Magisk-v15.zip on your device.
Reboot your phone and see if it works on your device.
Download Magisk Manager
Download the magisk manager application from here: https://magiskmanager.com/Magisk/MagiskManager-v5.5.1.apk
Install the application by following the above procedure.
Open it and then you will see magisk is installed on your Android device.
Source :
https://magiskmanager.com/

Abdullah_a86 said:
How to Install Magisk Latest Version 15.0 on Android [Non-Rooted Phones]
Download and install the Magisk v15 zip file from here:
http://magiskmanager.com/Magisk/Magisk-v15.0.zip
Place the zip file in your internal storage. Make sure that you remember the proper location of the zip file.
Reboot your phone into recovery ensure that you have a custom recovery such as TWRP is installed on your phone.
Now, click on the Install button in the TWRP recovery.
Download Magisk Manager
Navigate the Magisk-v15.zip on your internal storage or SD card.
Download Magisk Manager
Now, install the zip file on your device and wait till it is getting installed on your device.
Download Magisk Manager
You have successfully flashed the Magisk-v15.zip on your device.
Reboot your phone and see if it works on your device.
Download Magisk Manager
Download the magisk manager application from here: https://magiskmanager.com/Magisk/MagiskManager-v5.5.1.apk
Install the application by following the above procedure.
Open it and then you will see magisk is installed on your Android device.
Source :
https://magiskmanager.com/
Click to expand...
Click to collapse
That web page is false. The same creator of the application has confirmed it in his thread
I think you should reference and post the links to the author's thread and not to a third-party page.
Sent from my Samsung Galaxy S8+ using XDA Labs

ASPViTo said:
Guys, someone please help, i have J5 PRO 2017 SM-J530G, i did a search on all XDA and did not found twrp for my model "G", found only for models Y and F, so i must ask if that version exists, and where i can find it ! Second question would be, if i can't find one especifically for G model, if i can use Y or F model of twrp ! thanks in advance for someone that can help !
Click to expand...
Click to collapse
Anyone can help?

Help with Treble ROMs

I have the PRA-LX1 with already unlocked bootloader and got it rooted with TWRP + Magisk before the last OTA.
I'm not a beginner with rooting this phone but only got Problems with installing any Treble Rom (tried Lineage and Aosp) and every try ended with a bootloop I don't know what I'm doing wrong.
So please can anyone give me a step by step instruction?
Which Treble Rom is a good one and recommended for this phone?
Which TWRP do I need?
And how exactly do I flash them correctly? What do I wipe?
Sorry for this noob questions but I failed so many times with Treble and don't want to do the reinstall with erecovery for the 10000 time :crying:
Thanks

Try to install the stock recovery and ramdisk.

+1
I also have this problem. Wich TWRP works with treble roms? i tryed everything and everytime i get a boot loop.
Please help.

After I flashed a treble gsi, I need to flash stock recovery?

Atiqx said:
After I flashed a treble gsi, I need to flash stock recovery?
Click to expand...
Click to collapse
Yes. if u still get bootloop flash stock recovery and ramdisk first then flash gsi. make sure u factory reset on stock recovery after u flash gsi.

ppdr07 said:
Try to install the stock recovery and ramdisk.
Click to expand...
Click to collapse
ppdr07 said:
Yes. if u still get bootloop flash stock recovery and ramdisk first then flash gsi. make sure u factory reset on stock recovery after u flash gsi.
Click to expand...
Click to collapse
And which TWRP should I use for flashing?.. And how can I flash GSI with stock?
That makes no sense to me sorry

Flash via fsstboot. Stock recovery and ramdisk flash via fastboot. Im not using twrp so idk.
---------- Post added at 08:38 AM ---------- Previous post was at 08:37 AM ----------
U can see a tutorial at xda how to flash gsi without twrp. Google it.

ppdr07 said:
Flash via fsstboot. Stock recovery and ramdisk flash via fastboot. Im not using twrp so idk.
---------- Post added at 08:38 AM ---------- Previous post was at 08:37 AM ----------
U can see a tutorial at xda how to flash gsi without twrp. Google it.
Click to expand...
Click to collapse
I googled it, pretty much every source says that you require a custom recovery in order to flash a GSI or any custom ROM.

XDA XILFY said:
I googled it, pretty much every source says that you require a custom recovery in order to flash a GSI or any custom ROM.
Click to expand...
Click to collapse
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ u will find Flash GSI without TWRP

ppdr07 said:
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ u will find Flash GSI without TWRP
Click to expand...
Click to collapse
Oh, well that's pretty cool. Either way, I just tried flashing Official Resurrection Remix GSI with no luck. Stock recovery, attempted to flash through fastboot and it just gives me a bootloop, exactly like TWRP does. Followed the guide you linked to etc, just keeps rebooting.

XDA XILFY said:
Oh, well that's pretty cool. Either way, I just tried flashing Official Resurrection Remix GSI with no luck. Stock recovery, attempted to flash through fastboot and it just gives me a bootloop, exactly like TWRP does. Followed the guide you linked to etc, just keeps rebooting.
Click to expand...
Click to collapse
Go to openkirin.net/download download the rr beta 3

Atiqx said:
I have the PRA-LX1 with already unlocked bootloader and got it rooted with TWRP + Magisk before the last OTA.
I'm not a beginner with rooting this phone but only got Problems with installing any Treble Rom (tried Lineage and Aosp) and every try ended with a bootloop I don't know what I'm doing wrong.
So please can anyone give me a step by step instruction?
Which Treble Rom is a good one and recommended for this phone?
Which TWRP do I need?
And how exactly do I flash them correctly? What do I wipe?
Sorry for this noob questions but I failed so many times with Treble and don't want to do the reinstall with erecovery for the 10000 time :crying:
Thanks
Click to expand...
Click to collapse
Well, I finally got it all working.
You know the risks, don't blame me if something goes wrong, I did these exact steps to manage to root my phone without breaking it. C432, Dual SIM and PRA-LX1.
Have everything stock before following this short guide: Firmware, all stock recovery etc.
Installing the ROM and GApps
First, download necessary GSI files.
(Personally I got Official Oreo Resurrection Remix, here).
(Although you could find yourself using virtually any other GSI, I like the look and feel of RR, though I'll be changing my boot animation with root). Many people would probably recommend you to use something like an AOSP, or LOS which I was also considering on installing. They may also come bundled with GApps, which would negate the later need for installation or download of separate GApps.
This may include GAPPS but you should understand this from the GSI page, so for example on RR I had to download both the latest base ROM .img and the micro GApps.
So to do this I had to use the right architecture (For the P8 Lite 2017, this is ARMx64, do your good research, since my problem was getting this wrong with my PRA-LX1 (Mine was A-ONLY), this stands for the base ROM and GApps.
After this I actually didn't use TWRP as user @ppdr07 advised. I followed the guide he linked us to and did as so, without following the -u command, since it wasn't working for me (didn't affect anything, try it, if it doesn't work, just take that bit out).
The ROM ended up installing and posting through, everything set up perfectly.
After this I was like "Huh, so what now? How am I to flash GApps on this without TWRP?". I went for it and booted into fastboot where I flashed Askuccio's TWRP for hi6250 devices. At this point I worried that the ROM wouldn't post again - though it did, so from there I enabled dev options and switched on advanced power options just for ease of usage. From there I rebooted straight to recovery which posted fine, too.
At this point, you need to flash the GApps. Go for the one that the original GSI page recommends. Flash it to the System Image partition. Don't wipe anything. At this point I recommend that if you realise that you forgot to transfer any files to the SD card, you should do it from the system. It works better compared to the MTP on TWRP. Either way, that should work properly. Now, reboot the system, and it should work perfectly.
Enjoy, it took me months to get to this point lol
Rooting Your New ROM With Magisk
(Before installing this consider the other root options. I believe there's SuperSU and another possibly that I'm less aware of. Either way, in my opinion Magisk comes with the most benefits so I'll be helping you out with that).
After this I ended up flashing Magisk in order to use Snapchat and other apps similar to it. Firstly you'll want to set up Google stuff which has been newly added to the system, and then you'll want to go to chrome and download the Magisk Manager .apk from here. The main and most reliable place to get it is from the creator's project page found here, all main links stand out in the middle fairly well.
(Remember to enable downloading of unknown apps for Chrome in it's app settings, otherwise it won't download or install.)
If it still doesn't work at this point, I ended up holding down on the Magisk Manager link and pressing Download Link (or something to that effect). From this point just install it as you would any other out-of-store app.
Now, you'll need to download these two files from the Magisk page onto your computer: Stable Installer and Uninstaller. Next, while booted into Android, copy them over to either Internal or External storage and when it's done, reboot into TWRP again, either by advanced power menu or using the button commands for recovery. Personally, I think I need the power options with this phone.
In TWRP, simply go to Install, navigate to /externalsd/***[WHEREVER YOU PLACED YOUR MAGISK FILES]***, then install the Magisk installer .zip. If unchanged, the filename should be something like "Magisk-v17.1.zip". Install it, then give rebooting a go. Hopefully it'll post, if not, go back into TWRP and run the Uninstaller .zip, it's saved me a bunch of times.
Unblocking Apps That Say Something Like "Your Phone is Rooted or Modified, no access blah blah blah..."
(Snapchat is the example used here. It won't work upon login if you don't follow this step. Some apps don't work with this alone however, though somebody may have produced a separate guide or easily installable Magisk module with a solution for it. One that won't be fixed singularly with Magisk Hide is Google Pay).
After posting, if you need to unblock Snapchat or something, go to Magisk Manager (which should now be more green), open the top left context menu, tap on Magisk Hide, and search "snap" until you see the Snapchat logo pop up, then select it, then back out with the back button. It should stay selected in Magisk, and the app should now be usable and shouldn't give you any annoying errors, if not give it a reboot and see if it's solved.
Good luck!

Is it impossible to root k20 pro?

Hi there, I have been trying to root my k20 pro for 2 months and I am about to go crazy. First of all I don't want to install xiaomi.eu or other custom roms as they often have bugs. I use the indian version and I ve tried many different versions of magisk and tried both twrp and orange. I also tried disabling the treble enforcement and flashing the patched image but still whatever I do, after the installation, the phone loops back to the twrp page. Can anyone help me solve this?

shadow_170 said:
Hi there, I have been trying to root my k20 pro for 2 months and I am about to go crazy. First of all I don't want to install xiaomi.eu or other custom roms as they often have bugs. I use the indian version and I ve tried many different versions of magisk and tried both twrp and orange. I also tried disabling the treble enforcement and flashing the patched image but still whatever I do, after the installation, the phone loops back to the twrp page. Can anyone help me solve this?
Click to expand...
Click to collapse
uhhh just flash magisk if you have twrp

No, it's not impossible. I have a global version Mi 9T Pro and rooted with Magisk.
Find and install the custom recovery that works for you (I found that this recovery worked for me:
TWRP 3.3.1-22 Unofficial by mauronofrio)
then install magisk zip via recovery.
Good luck

Mooatreides said:
uhhh just flash magisk if you have twrp
Click to expand...
Click to collapse
installing is not the issue, I can install it but after I install, I can't go pass the loading screen and then phone goes back to twrp

shadow_170 said:
installing is not the issue, I can install it but after I install, I can't go pass the loading screen and then phone goes back to twrp
Click to expand...
Click to collapse
Do u already clear / wipe data after flashed the magisk cause i have the exact problem bootloop into twrp i solved it with wipe / format data

Upgrade to stable ui 1 android 10

Hi,
I want to upgrade my smartphone to latest version stable android 10. I'm rooted and use twrp unofficial mauronofrio 3.3.1.12
I'd want to say if these passages are correct
1) upgrade latest unofficial twrp 3.3.1.1.3
2) uninstall magisk canary
3) install latest RMX1931EX_11.C.23 ozip with new twrp
4) install vbmeta.img
5) install canary magisk manager
6) factory reset
7) reboot
Is this procedure correct?
Thanks

euri007 said:
Hi,
I want to upgrade my smartphone to latest version stable android 10. I'm rooted and use twrp unofficial mauronofrio 3.3.1.12
I'd want to say if these passages are correct
1) upgrade latest unofficial twrp 3.3.1.1.3
2) uninstall magisk canary
3) install latest RMX1931EX_11.C.23 ozip with new twrp
4) install vbmeta.img
5) install canary magisk manager
6) factory reset
7) reboot
Is this procedure correct?
Thanks
Click to expand...
Click to collapse
The magisk does not work, if you find any way please tell me, why and tried everything and nothing that I manage to make it work
Enviado desde mi RMX1931 mediante Tapatalk

Hello, same for me I would like to update my phone from twrp to the latest version RMX1931EX_11_C.23, And I don't know how to do it if you can help me
And I'd like to know if the fingerprint works after switching to this version
Thanks in advance

Hi all!
Realme UI manual update link for RealMe X2 Pro is available in Realme India site. Here is the link.
https://www.realme.com/in/support/software-update
I m also thinking of updating it using this link. I hope it is same for European versions too.

ok magisk
I use Magisk 24 with twrp orange and modified vbmeta, but the fingerprint is broken

ogutolopes said:
I use Magisk 24 with twrp orange and modified vbmeta, but the fingerprint is broken
Click to expand...
Click to collapse
Could you pass me the magisk you used and the twrp, And I installed them all and it doesn't work for me, please send them to me and tell me how you did it
Enviado desde mi RMX1931 mediante Tapatalk

Lets goo
fastboot flash recovery OrangeFox-R10.1_1.img
boot in twrp
flash OrangeFox-R10.1_1.zip
rebbot in recovery
flash magisk 20.4
reboot recovery
flash vbmeta.img (FOR RECOVERY)
Clean caches
Reboot

ogutolopes said:
fastboot flash recovery OrangeFox-R10.1_1.img
boot in twrp
flash OrangeFox-R10.1_1.zip
rebbot in recovery
flash magisk 24
reboot recovery
flash vbmeta.img (FOR RECOVERY)
Clean caches
Reboot
I can't post a link here yet but send me an email and I'll send you the link to post to everyone with the google drive files.
gmail is amigulopes
Click to expand...
Click to collapse
[email protected] Send me all the files and the vbmeta please
Enviado desde mi RMX1931 mediante Tapatalk

Ok go
Post the link for everyone please
I haven't tested it on RMX1931EX_11.C.23, I'm using RMX1931EX_11.C.20

ogutolopes said:
fastboot flash recovery OrangeFox-R10.1_1.img
boot in twrp
flash OrangeFox-R10.1_1.zip
rebbot in recovery
flash magisk 24
reboot recovery
flash vbmeta.img (FOR RECOVERY)
Clean caches
Reboot
I can't post a link here yet but send me an email and I'll send you the link to post to everyone with the google drive files.
gmail is amigulopes
Click to expand...
Click to collapse
Thanks Bro and I'll try it tomorrow, thanks for the help [emoji847]
Enviado desde mi RMX1931 mediante Tapatalk

ogutolopes said:
Post the link for everyone please
I haven't tested it on RMX1931EX_11.C.23, I'm using RMX1931EX_11.C.20
Click to expand...
Click to collapse
with RMX1931EX_11_OTA_1230 i am able to boot device thanks :laugh:

I tested it yesterday ... Magisk works for me too in C23

ogutolopes said:
I tested it yesterday ... Magisk works for me too in C23
Click to expand...
Click to collapse
So, when somebody that made it work will make a guide explaining the steps for once?

deviantor said:
So, when somebody that made it work will make a guide explaining the steps for once?
Click to expand...
Click to collapse
Follow steps explained in post 7 of this thread.
Remember fingerprint sensor doesn't work

Hello, you have a lead if they will fix the fingerprint problem, commils have done it on the older version?

Tried root with Magisk and now my phone doesn't start.

Hi all, as the title implies, I'm a newbie to all this. I tried to root my phone using an online guide on how to root xiaomi mi 9 using TWRP and Magisk. I faced some problems but eventually everything was done as the tutorial said.
Here are the exact steps I've done...
- unlocked the phone via Mi unlocking tool
- started fastboot and installed TWRP 3.3.1-0 ( I installed a version first that didn't start when I pressed both power and volume up, then installed the 331-0 version that worked)
- inside TWRP i installed Magisk 20.4
- The phone restarted but never reach the system. It hangs for sometime on android screen then restarts again and then brings me again to TWRP
I spent quiet sometimes reading online solutions but nothing worked for me...
I tried installing Magisk uninstaller.zip nothing changed. tried wiping cache. Tried installing magisk 20 and 20.3
some solutions recommended installing Magisk 19 0r 17 but they both ended up with error for me.
Please help. I'm on Android 10 with MIUI 11

Never had any problems with magisk What TWRP version have you used?
The steps are the same:
-Unlocked phone.
-TWRP.
-Flash magisk zip (you can install magisk manager, then download latest official magisk zip from it and then flash downloaded zip from TWRP).
-reboot.
Anyway you can fix your system by:
-wipe cache/dalvik.
-FORMAT data (with yes).
I don't think you need this 2 first steps for flashing fastboot ROM but it won't hurt.
-Flash official fastboot ROM in fastboot mod, using mi flash tool or included batch/bash scripts (don't lock your device if you don't want to, choose the right option when you flash, with or without "lock").
Mi 9 Fastboot V11.0.5.0.QFAMIXM Global
Mi 9 Fastboot V11.0.8.0.QFAEUXM EEA
You will loose all your data, apps and settings.

Thanks for your help mate...
I'm using this TWRP version..
----//dl.twrp.me/cepheus/
Strangely enough, my phone started after flashing Magisk-uninstaller-20191011.zip I'm sure i tried this before and it doesn't work.
Anyway, all my app and data are gone. I still want to root though, can you help me? what version of TWRP and Magisk i should use?

F.Ashour said:
Thanks for your help mate...
I'm using this TWRP version..
----//dl.twrp.me/cepheus/
Strangely enough, my phone started after flashing Magisk-uninstaller-20191011.zip I'm sure i tried this before and it doesn't work.
Anyway, all my app and data are gone. I still want to root though, can you help me? what version of TWRP and Magisk i should use?
Click to expand...
Click to collapse
Use twrp-3.3.1-62-cepheus-mauronofrio.img.
Magisk-v20.4.zip

antonio52 said:
Use twrp-3.3.1-62-cepheus-mauronofrio.img.
Magisk-v20.4.zip
Click to expand...
Click to collapse
Thanks for your time mate...
I tried this twrp and magisk your mentioned. same issue. boots back to twrp never to system. Any solutions?

F.Ashour said:
Thanks for your time mate...
I tried this twrp and magisk your mentioned. same issue. boots back to twrp never to system. Any solutions?
Click to expand...
Click to collapse
I would try flash latest fastboot ROM as i said before it will reflash almost everything And then flash magisk by installing magisk manager and download latest magisk zip through it and flash it with twrp-3.3.1-62-cepheus-mauronofrio TWRP
Sometimes first flash of TWRP don't work, just flash it ones more by fastboot flash twrp twrp-3.3.1-62-cepheus-mauronofrio.img from your pc.