Hello guys,
I'm using Mi9T Pro with Stock EU rom MIUI 12 version 12.0.4
I have this issue with Xiaomi regarding how the system handles prioritization of Network Band when it comes to using Mobile Data connection.
We know that we have options to prefer 4G, 3G or 2G. But it doesn't define which specific band. Like for example, 4G can be 4G/LTE or 4G+/LTE+. These 2 networks seem to be the same but these actually have different network bands
The question is how does Xiaomi system prioritize which band to select?
Does it prefer the one with higher signal or the one that pings better.
I have this question because as I have experienced, Xiaomi system seem to prefer the one with better signal regardless if it can't even pull any data. In short, it will keep connecting to a network with a better signal strength even if you won't get any internet connection out of it.
I've been noticing this when I set my phone to 4G preferred in my location. When signal indicator turns to 4G/LTE. It may seem to show you that you're connected to the internet but you can't really browse anything because there's actually no data for that band. But when it turns to 4G+, that's when I really get to connect to the internet.
And the biggest problem is that the system prefers to connect to the 4G band. That's why I'd prefer using 3G network because I have a more stable 3G+ signal here.
Another thing that's really disappointing is that my other phone OnePlus 5T handles this well. We share the same APN.
Sadly there's no band selection in *#*#4636#*#*
It would be glad if anyone could provide a better solution to this.
Thank you!
peeweew said:
We know that we have options to prefer 4G, 3G or 2G. But it doesn't define which specific band. Like for example, 4G can be 4G/LTE or 4G+/LTE+. These 2 networks seem to be the same but these actually have different network bands
...
I've been noticing this when I set my phone to 4G preferred in my location. When signal indicator turns to 4G/LTE. It may seem to show you that you're connected to the internet but you can't really browse anything because there's actually no data for that band. But when it turns to 4G+, that's when I really get to connect to the internet. ..
Click to expand...
Click to collapse
4+ g usually means (specially on Xiaomi phones) LTE Advanced Carrier Aggregation where no other/different bands are used but instead the phone is in parallel attached to more than one 4g band. As such, it increases the speed (and maybe, in your case provides a fail-over?!):
https://www.gizbot.com/mobile/featu...ifference-between-4g-4g-explained-053769.html
However, there is another question why (on that place) you have strong 4g signal with no Internet, so that when your phone switches to CA and in parallel attaches to another 4g band (maybe with a weaker signal) it obtains Internet connection over that second band
At least to better understand on which band (at which place and which base station) you have a 4g signal but with no Internet connection, install an app like Network Cell Info Lite, LTE Discovery, Net Monitor Lite). I think with Net Monster (all apps are on Playstore) you can even see on the map where is the base station you are attached to
If your phone is rooted, you could use Network Signal Guru that will show you, in case of 4+g all bands you are aggregated to with their signal strengths, base stations locations, etc (apps above would always show just one, primary band):
https://forum.xda-developers.com/mi-9t/help/monitoring-4g-advanced-aggregated-t4107967
zgfg said:
4+ g usually means (specially on Xiaomi phones) LTE Advanced Carrier Aggregation where no other/different bands are used but instead the phone is in parallel attached to more than one 4g band. As such, it increases the speed (and maybe, in your case provides a fail-over?!):
https://www.gizbot.com/mobile/featu...ifference-between-4g-4g-explained-053769.html
However, there is another question why (on that place) you have strong 4g signal with no Internet, so that when your phone switches to CA and in parallel attaches to another 4g band (maybe with a weaker signal) it obtains Internet connection over that second band
At least to better understand on which band (at which place and which base station) you have a 4g signal but with no Internet connection, install an app like Network Cell Info Lite, LTE Discovery, Net Monitor Lite). I think with Net Monster (all apps are on Playstore) you can even see on the map where is the base station you are attached to
If your phone is rooted, you could use Network Signal Guru that will show you, in case of 4+g all bands you are aggregated to with their signal strengths, base stations locations, etc (apps above would always show just one, primary band):
https://forum.xda-developers.com/mi-9t/help/monitoring-4g-advanced-aggregated-t4107967
Click to expand...
Click to collapse
Ohhh thank you for this explanation.... Someone actually mentioned aggregation to me also. This helps make me clear up how Xiaomi does this and that. Does this mean force selection of network band won't work on Xiaomi devices?
peeweew said:
Ohhh thank you for this explanation.... Someone actually mentioned aggregation to me also. This helps make me clear up how Xiaomi does this and that. Does this mean force selection of network band won't work on Xiaomi devices?
Click to expand...
Click to collapse
I'm pretty sure that with MIUI 11 there was an option to disable/enable 4+, but on MIUI 12 (12.0.2 QFJEUXM) there is no more that option
I don't know of other options (except to prefer 4, 3 or 2 g), specially about selecting bands
choose band mode
peeweew said:
Hello guys,
I'm using Mi9T Pro with Stock EU rom MIUI 12 version 12.0.4
I have this issue with Xiaomi regarding how the system handles prioritization of Network Band when it comes to using Mobile Data connection.
We know that we have options to prefer 4G, 3G or 2G. But it doesn't define which specific band. Like for example, 4G can be 4G/LTE or 4G+/LTE+. These 2 networks seem to be the same but these actually have different network bands
The question is how does Xiaomi system prioritize which band to select?
Does it prefer the one with higher signal or the one that pings better.
I have this question because as I have experienced, Xiaomi system seem to prefer the one with better signal regardless if it can't even pull any data. In short, it will keep connecting to a network with a better signal strength even if you won't get any internet connection out of it.
I've been noticing this when I set my phone to 4G preferred in my location. When signal indicator turns to 4G/LTE. It may seem to show you that you're connected to the internet but you can't really browse anything because there's actually no data for that band. But when it turns to 4G+, that's when I really get to connect to the internet.
And the biggest problem is that the system prefers to connect to the 4G band. That's why I'd prefer using 3G network because I have a more stable 3G+ signal here.
Another thing that's really disappointing is that my other phone OnePlus 5T handles this well. We share the same APN.
Sadly there's no band selection in *#*#4636#*#*
It would be glad if anyone could provide a better solution to this.
Thank you!
Click to expand...
Click to collapse
Download activity launcher (play store), run it
Search band mode ===> Set radio band mode
Choose band mode you need
uncomment said:
Download activity launcher (play store), run it
Search band mode ===> Set radio band mode
Choose band mode you need
Click to expand...
Click to collapse
This is what I was looking for.
Thanks!
Related
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Thaantje said:
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Click to expand...
Click to collapse
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Cederic said:
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Click to expand...
Click to collapse
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Thaantje said:
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Click to expand...
Click to collapse
Well then I really have no idea - the only thing I can think of is that you might need to replace your sim card if your provider didn't already do so in advance of the 4G rollout. Hopefully someone with more information might step in here, but the international version is LTE capable out of the box. If you don't hear anything else I'd suggest to try and contact vodafone and get a clear answer from them first.
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
br0adband said:
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
Click to expand...
Click to collapse
I can check my area on the vodafone site. I live in a 4G network area 100%!
i guess my wcdma is sufficient then.. didnt experience speedboost tho..
br0adband said:
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional.
Click to expand...
Click to collapse
That would be because you're on the i537 from ATT, rather than the i9295 that this discussion is about. I checked google and vodafone holland does indeed use LTE on the right bands in its brand new rollout, so it isn't that - most likely it's his sim that needs replacing or it's just not activated on his account yet.
I saw a few screenshots of people's Moto X's from sprint with a bunch of options under Network Mode. I have the XT1053 (TMO unlocked, on ATT network) and the only options I see are "Auto" and "2G."
I browsed around and found that there's an LTE OnOff app, but I'm just wondering if there's a way I can get those options for 3G on my device's Network Mode option list?
The reason why I even care is because for some reason at my workplace, I can't seem to get any data through LTE. My signal will display 3 bars of LTE, but it absolutely does not work. While it will turn off LTE and just say 4G since it's on auto, I find that a majority of my day, it WON'T switch. It stays on 4G LTE 99% of the time and does not function at all. When I walk outside the building, LTE works perfectly fine. Would I be right to assume that the auto mode is literally on borderline between switching, so it never establishes a stable connection?
I guess it brings me to the question, is the Auto mode inefficient / will I have to live with manually turning off LTE every time I get to work? :/
noc215 said:
I saw a few screenshots of people's Moto X's from sprint with a bunch of options under Network Mode. I have the XT1053 (TMO unlocked, on ATT network) and the only options I see are "Auto" and "2G."
I browsed around and found that there's an LTE OnOff app, but I'm just wondering if there's a way I can get those options for 3G on my device's Network Mode option list?
The reason why I even care is because for some reason at my workplace, I can't seem to get any data through LTE. My signal will display 3 bars of LTE, but it absolutely does not work. While it will turn off LTE and just say 4G since it's on auto, I find that a majority of my day, it WON'T switch. It stays on 4G LTE 99% of the time and does not function at all. When I walk outside the building, LTE works perfectly fine. Would I be right to assume that the auto mode is literally on borderline between switching, so it never establishes a stable connection?
I guess it brings me to the question, is the Auto mode inefficient / will I have to live with manually turning off LTE every time I get to work? :/
Click to expand...
Click to collapse
3 bars of LTE is an excellent signal. With 1 bar of signal I can still get 15mbps down from my provider. If your phone is detecting such a strong received signal it won't be switching back to HSPA on its own. For some reason the building you're in may block the phones transmitted signal more then it blocks the signal from the cell site. I am guessing you're on band 4 LTE which has quite the frequency difference between uplink and downlink. Your only option(assuming the phone or cell site isn't defective) is to manually switch to WCDMA with a third party app such as the "LTE setting" app in the Play store. Or unlock your bootloader and flash firmware from another provider that has more options. I know the Rogers Canada firmware has an LTE on/off option, it also has a 2G only option. Sadly Rogers has not yet approved the release of 4.4 (kitkat).
Steve-x said:
3 bars of LTE is an excellent signal. With 1 bar of signal I can still get 15mbps down from my provider. If your phone is detecting such a strong received signal it won't be switching back to HSPA on its own. For some reason the building you're in may block the phones transmitted signal more then it blocks the signal from the cell site. I am guessing you're on band 4 LTE which has quite the frequency difference between uplink and downlink. Your only option(assuming the phone or cell site isn't defective) is to manually switch to WCDMA with a third party app such as the "LTE setting" app in the Play store. Or unlock your bootloader and flash firmware from another provider that has more options. I know the Rogers Canada firmware has an LTE on/off option, it also has a 2G only option. Sadly Rogers has not yet approved the release of 4.4 (kitkat).
Click to expand...
Click to collapse
That makes a lot more sense to me now. So basically the "Auto" mode only considers my reception and not transmittance strength, so it never saw a need to switch me off LTE. I am almost sure it is not my phone because I started experiencing a signal loss issue with my S3 a few days ago. I doubt it's the cell site because as soon as I step out of the building, LTE works with no problems.
I did ended up using LTE OnOff to force CDMA and I can actually do stuff now. I went and did a speedtest ...
Ping: 114 ms
Down: 4.06 Mbps
Up: 0.77 Mbps
I guess with the lack of options, I have yet another reason to roll up the sleeves and get my hands dirty. Haven't touched ABD since I had a samsung captivate!
Thank you
Is there anyway to force LTE band change between bands 13 and 4? At home, I have one bar on band 4, but get 60 dl, and 30 up. However, on band 13 I'll get full bars and get 30 dl, 15 up. I don't use my data at home as I am always on wifi, so this cell standby battery drain is murder. If I reset my data connection it will connect to band 13 initially, but it will then change to band 4. Switching my carrier is not an option as T-Mobile, Sprint, and AT&T get equally crap reception and I'm still under contract with Verizon which ends in October. Maybe then I might think about switching to project fi.
I've seen other threads on disabling certain bands, but those bands are only used by T-Mobile and Sprint, so they are of no use to me. Any ideas?
There is a thread about 4G/LTE.
http://forum.xda-developers.com/showthread.php?p=55635555/
Further search the play store for 4g switching apps.
NLBeev said:
There is a thread about 4G/LTE.
http://forum.xda-developers.com/showthread.php?p=55635555/
Further search the play store for 4g switching apps.
Click to expand...
Click to collapse
I've seen that thread but it doesn't say anything about removing or blocking certain bands. As for the 4g switcher apps they only have he ability to change LTE modes via CDMA or GSM
The last idea, in case you use a Nexus 6.
There is thread with flashable radio's.
Maybe you can find an older radio that doesn't have the bands you don't want.
http://forum.xda-developers.com/showthread.php?p=59728002/
NLBeev said:
The last idea, in case you use a Nexus 6.
There is thread with flashable radio's.
Maybe you can find an older radio that doesn't have the bands you don't want.
http://forum.xda-developers.com/showthread.php?p=59728002/
Click to expand...
Click to collapse
Yeah, i tried flashing the oldest radio listed and it's still a no go, band 4 still seems to be enabled. :/
aroy97 said:
Yeah, i tried flashing the oldest radio listed and it's still a no go, band 4 still seems to be enabled. :/
Click to expand...
Click to collapse
No more ideas; think it is not possible to disable band 4, without hacking/patching the radio image.
NLBeev said:
No more ideas; think it is not possible to disable band 4, without hacking/patching the radio image.
Click to expand...
Click to collapse
For now I have my connection as 2g whenever I'm on wifi so that should fix the cell standby for now.
aroy97 said:
For now I have my connection as 2g whenever I'm on wifi so that should fix the cell standby for now.
Click to expand...
Click to collapse
I have the same because here in the Netherlands we have the so called 4G. But when I am home (inside) there is bad connection. Phone calls are disconnected frequently.
With 2G very good reception at home.
On the road I switch to 4G when I need internet.
I use an app to quickly switch 2G-4G.
It's a rather old app of CurveFish and is in the play store - 2G 3G -
I have exact same problem but problem of speed.
There are 3 lte bands 850mhz,1800mhz and 2300 mhz.
2300 mhz has highest speed which i want my redmi note 3 to run on only but in my home it only switches between 850 mhz and 1800 mhz.
Searched a lot but not able to find any guide which allows to lock the frequency to 2300 mhz band only. The signal bar is also 3-4 on 2300 mhz still it connects to 850 and 1800 mhz most of the time unless i am in open area outside house then it switches to 2300mhz band.
Use QXDM
aroy97 said:
Is there anyway to force LTE band change between bands 13 and 4? At home, I have one bar on band 4, but get 60 dl, and 30 up. However, on band 13 I'll get full bars and get 30 dl, 15 up. I don't use my data at home as I am always on wifi, so this cell standby battery drain is murder. If I reset my data connection it will connect to band 13 initially, but it will then change to band 4. Switching my carrier is not an option as T-Mobile, Sprint, and AT&T get equally crap reception and I'm still under contract with Verizon which ends in October. Maybe then I might think about switching to project fi.
I've seen other threads on disabling certain bands, but those bands are only used by T-Mobile and Sprint, so they are of no use to me. Any ideas?
Click to expand...
Click to collapse
Hi - not sure if this is still a topic of interest, but you can use QXDM software to achieve this - you just need to change NV line 6828 to be "4096" decimal value. On the Nexus 6, this is a fairly easy process as you just need to boot to bootloader and select "BP Tools" as your boot-up option and then the phone will be in diagnostic mode to connect to a PC. There's info out there on XDA with more detail, but as long as you can successfully install the Motorola/Qualcomm drivers you can fairly easily restrict LTE bands to whatever combination you'd like.
Be aware - some say this is a risky operation but I've not found that to be the case. But there is a chance of messing up your device if you're not careful.
Take a look at the "NV Calculator" app in the Play Store for additional info on determining decimal values for the LTE bands (you might want to keep band 2, for instance, as Verizon uses that sometimes as well).
Here's more info on this on XDA:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Good luck!
If you use a OnePlus device specifically a OnePlus 3/3T then there's a really high probability that you've been effected by the unstable network problems(Data network automatically switching to 2G or 3G when the 4G signal becomes a little weak even though the device is capable of receiving the signal) caused when the signal strength is very poor. Even if you select 4G/3G only in the settings the signal becomes 2G.
If you are getting affected by this issue then you can solve this just by installing an app from the play store.
STEPS-
1. Install the app " JOnePlus Tools".
2. Open it and then click on "More Settings" icon on the top right corner.
3. After that click on phone info.
4. In phone info select drop down menu and choose the option, "LTE only" or " WCDMA only" according to your need.
5. Done.
I've been testing it for a few hours now and and haven't faced the issue.
If you are still not able to understand what to do then watch this video, everything done step by step.
Yeah you can temporarily solve this problem with this guide but,
-If your carrier doesnt support VoLTE, your phone can not drop to HSPA/2G when you select LTE only mode and you can't make and receive calls.
-It is known that LTE signal is weaker then 2/3G signal and old technologies have better coverage in some areas unfortunately. In that areas you may not to receive any signal.
Anyway, thanks for guide.
I absolutely agree with you about problem. Phone drops suddenly 3G from LTE for no reason and reception is weaker than most new phones. But unfortunately we have no good/permanent solucion.
Makes you wonder what 1+ did as this is only an issue with their stock roms and roms based on their roms. AOSP based roms dont suffer from this.
qhsusb_bulk said:
Yeah you can temporarily solve this problem with this guide but,
-If your carrier doesnt support VoLTE, your phone can not drop to HSPA/2G when you select LTE only mode and you can't make and receive calls.
-It is known that LTE signal is weaker then 2/3G signal and old technologies have better coverage in some areas unfortunately. In that areas you may not to receive any signal.
Anyway, thanks for guide.
I absolutely agree with you about problem. Phone drops suddenly 3G from LTE for no reason and reception is weaker than most new phones. But unfortunately we have no good/permanent solucion.
Click to expand...
Click to collapse
Thank you for that information
zelendel said:
Makes you wonder what 1+ did as this is only an issue with their stock roms and roms based on their roms. AOSP based roms dont suffer from this.
Click to expand...
Click to collapse
OOS has signal spoofing in it, i.e it shows a good signal even when the reception is very weak.
Hi
This can be done by dialing the code *#*#4636#*#* >phone info. No need to install a separate app for it
Hello,
I am now having issue with my K20 Pro. I'm using 12.0.5 xiaomi eu
Not certain but possibly started after I upgraded to MIUI 12.
Issue is that the mobile data never works when signal is 4G/LTE.
Internet only works if you find a stable 4G+/LTE+ signal. The system would tend to constantly switch between 4G and 4G+.
Another option is to use 3G/H+ Preferred option. H+ works fine but as we all know this is the older network which means slower but decent data
I have read some solutions to delete and reset your APN. But it never works either. Also compared the network behavior between other phone like Oneplus 5T and it doesn't have the issue even using the same network and same location.
I'm not sure if this has been raised to Xiaomi directly. But I'm hoping there's a fix for this.
Thank you!!
peeweew said:
Hello,
I am now having issue with my K20 Pro. I'm using 12.0.5 xiaomi eu
Not certain but possibly started after I upgraded to MIUI 12.
Issue is that the mobile data never works when signal is 4G/LTE.
Internet only works if you find a stable 4G+/LTE+ signal. The system would tend to constantly switch between 4G and 4G+.
Another option is to use 3G/H+ Preferred option. H+ works fine but as we all know this is the older network which means slower but decent data
I have read some solutions to delete and reset your APN. But it never works either. Also compared the network behavior between other phone like Oneplus 5T and it doesn't have the issue even using the same network and same location.
I'm not sure if this has been raised to Xiaomi directly. But I'm hoping there's a fix for this.
Thank you!!
Click to expand...
Click to collapse
I dont know if its exactly the same issue I had , but I give you my solution , it might solve your problem as well :
1. download Activity Launcher from the playstore.
2. Open it and search "miuiBand"
3. Choose the network LTE band of your Operator(look it up in google) for example LTE B3 (if you use only 4G , look at LTE and not LTE Preffered)
4. Toggle Selection ON (Top).
Hope this solves your issue as it did mine.
urbanmec said:
I dont know if its exactly the same issue I had , but I give you my solution , it might solve your problem as well :
1. download Activity Launcher from the playstore.
2. Open it and search "miuiBand"
3. Choose the network LTE band of your Operator(look it up in google) for example LTE B3 (if you use only 4G , look at LTE and not LTE Preffered)
4. Toggle Selection ON (Top).
Hope this solves your issue as it did mine.
Click to expand...
Click to collapse
I have this. However, I can't understand why it suddenly changes reverts from time to time. Do you always take a look at it whenever connecting to Mobile Data?
As I also check in Network Cell Info Lite, phone still connects to the band causing the problem (Band 21)
peeweew said:
I have this. However, I can't understand why it suddenly changes reverts from time to time. Do you always take a look at it whenever connecting to Mobile Data?
As I also check in Network Cell Info Lite, phone still connects to the band causing the problem (Band 21)
Click to expand...
Click to collapse
When you get low coverage or restart the phone or get out of plane mode , your network settings go back to default (band will be chosen automatically), but forcing the prefered network type ,you will prevent this from happening (you will only have to worry about restarts /phone / modem).
Making the choice permanent IS possible with root (Check this Link : https://forum.xda-developers.com/ge...ific-network-bands-snapdragon-t3744243/amp/).
urbanmec said:
When you get low coverage or restart the phone or get out of plane mode , your network settings go back to default (band will be chosen automatically), but forcing the prefered network type ,you will prevent this from happening (you will only have to worry about restarts /phone / modem).
Making the choice permanent IS possible with root (Check this Link : https://forum.xda-developers.com/ge...ific-network-bands-snapdragon-t3744243/amp/).
Click to expand...
Click to collapse
Btw, I cannot get Network Signal Guru to work with Magisk v21.1 anymore
Mi 9T (not Pro), tried with EEA stock MIUI 12.0.3 and Xiaomi.eu stable 12.0.6.
Last time it worked for me on EEA 12.0.2 with Magisk v21.0
I tried now that Samsung Band Selection app., it complains that hidden activity is not found (on my Xiaomi.eu 12.0.6) and it cannot open band selection options
But I don't have a problem with bands, just curious to tesr the things?
Bought a Xiaomi Redmi note 9s last month for Christmas for myself.
It had MIUI 12.0.2 on it by default.
Played around with it for a whole month and everything was working perfectly...4g LTE included.
I don't have internet at home so I use my phone has a hotspot.
Average download speed was 60 megabits per second.
... Until I upgraded to 12.0.3, I then lost LTE and only connected using H+
So beware before upgrading because I have not found the solution yet other than flash with pixel experience ROM.
Edit :
Changing Network detection from automatic to manual fixed it !
My Redmi notes "global" phones 4 & 5 had to flash new ROM to unlock bands.
Hope this helps
I realised that this issue is most likely due to baseband limitation with our Network provider. Given that I'm using a China Variant, the basebands my phone is lacking needed basebands here in the Philippines. What I'm looking for now is a QPST guide for SD855 to activate at least base band 20. I can't find any that has enabled it thru QPST yet.