I messed up my v40 405ebw, itry to cross flash it to korean version 409n using lgup partition dl but now it is not usable, an error always pop up and I can't access about phone, i try to flash it via refurbish but it includes error not support for cross flash please help me to restore my v40..
you may download and install the below LGUP, then replace the files in the lgup forlder in your program files with the one in "LGUP_to be copied into LGUP folder", then run LGUP you'll be able to crossflash to your European kdz again.
drive.google .com/file/d/1mmap7NZAdNXXz1TIZTDv7XEuqEqyR9JA/view?usp=sharing
ps. remove spaces in the link
hope it helps.
Related
Hi,
i have a European Razr I with locked bootloader on JB OTA update, stuck on boot loop. The bootloader can not be unlocked due to the JB update. That means I cant flash anything over 100mb.
I have tried to flash with RSD some ROMs that are under 100mb and recommended for Razr I on JB.
They are (81.5.31002-81.5.39001.XT890.Retail.en.GB, 81.5.32002-81.5.40002.XT890.Retail.en.EU), both Zip files.They decompress in RSD but error out with following msg
"Please check input file. Either XML format is wrong or image files associcated is missing".
I cant find any ROMs 100mb or less with an XML file in it. The bigger ROMs do but they error in the flashing process at step 8 of due to the file size bigger than 100mb.
I also tried to install the 100mb rom in fastboot mode from external sd card but got the error msg below.
Can it be flashed this way or only through RSD?
I am hoping there is a custom ROM for a phone in my situation that can be flashed?.
You cannot flash Roms with RSDlite, only original firmware - for Roms you would also need an unlocked bootloader.
Flash Blur_Version.91.2.26001.XT890.Retail.en.EU via RSDlite 6.1.5, don't try to flash the ICS versions of the EU Retail, they will probably brick your phone.
Thanks but this will not work as one of the files is over 100mb.
I read some where there was a way to edit the xml file to over ride this,is that true?
RSDlite 6.1.5 can flash in 100mb steps, its working 100%. Just download the zip, decompress and flash.
It worked!! . Thanks so much. I was using an older version of RSD.
I tried all versions of RSD Lite but still getting 'Please check input file. Either XML format is wrong or image files associcated is missing' with 81.5.39002-91.2.26001.O2.en.DE 4.0.4-4.1.2 found here: http://forum.xda-developers.com/showthread.php?t=2028814.
I went through lot of threads and there was something about a specific xml file, but I didn't find out where can I get it. Also every secon URL is not available any more so it is hard to try something...
Can someone help me?
Is it possible for me to use QFIL somehow to flash my kdz? i cannot get lgup to work and i really need my phone back active.. im open to any alternatives.. thank you
Hi.
I have the problem. I uploaded the V405TA firmware to the V405UA model and the DOWNLOAD MODE does not start. QFIL recognizes the QUALCOMM 9008 and communicates with it.
Can anyone provide full QFIL software with RAW PROGRAMMER XML files? Please help.
greetings
Peter
piotras1990 said:
Hi.
I have the problem. I uploaded the V405TA firmware to the V405UA model and the DOWNLOAD MODE does not start. QFIL recognizes the QUALCOMM 9008 and communicates with it.
Can anyone provide full QFIL software with RAW PROGRAMMER XML files? Please help.
greetings
Peter
Click to expand...
Click to collapse
You flashed t-mo firmware to a non t-mo device? That's one of the big no-no's re LG phones, t-mo firmware, the only one, has different encryption and you can't crossflash to it or from it. In other words... when it comes to t-mo, don't F with it, as it will F up your phone.
I'd try this, use these files and flash (qfil) to their respective partitions. Then try download mode and kdz to a diff rom, ******anything***** but t-mo.
https://drive.google.com/drive/folders/1WQaaM35SWiF_UbXAM8hiRB95D2CDkIEq
Download the backup. Unzip it to find 7 luns (0-6).
1. Open QFIL
2. Select Flat Build
3. Click load xml and select the rawprogram(#) XML that is in the lun(0-6) folder.
4. If it asks you for a patch xml, click cancel. It's not needed to flash this backup.
5. Click download
6. Repeat steps for each lun folder.
I messed up my v40 405ebw, itry to cross flash it to korean version 409n using lgup partition dl but now it is not usable, an error always pop up and I can't access about phone, i try to flash it via refurbish but it includes error not support for cross flash please help me to restore my v40..
I have korean version V40 (30f).
I have destroyed my firmware by flashing wrong things in wrong partitions.
As an last ditch effort, i flashed 30c (dont know which version, probably pie) adb, boot, dtbo and laf files to get into download mode, so i could get into download mode again.
But in download mode, when i try to flash the original kdz (Android Q), following error occurs, which i successfully flashed before this.
I tried different 30f kdz, but error shows up i only could use skt_kr version
Any idea why? Should i download Pie or Oreo version of it?
I have to wait 24 hours since i already exceeded download quota of the day.
SUCCESS!
For anyone having problem with LGUP
Use this, it bypass crossflash protection.
[STOCK][CROSSFLASH][GUIDE] How to install Stock Rom (or crossflash) using LG UP
This is a guide on how to install Stock Rom or Crossflash on any LG G7 ThinQ (Except for G710TM and G710V) Please read everything written down and on the second post before asking questions! Before we do anything i have to explain some stuff...
forum.xda-developers.com