Hello today I am going to share you how to install stock rom in asus zenfone 4 using raw file
first you must install these :
Intel Usb Driver: http://d-h.st/VfO
Asus Flash Tool Installer: https://yadi.sk/d/K5UINtv9e9ehP
Asus zenfone 4 raw file: http://www.mediafire.com/download/prtp8p7ok6s9izf/Zenfone+4+V4.3.10.raw
After you install, follow my steps carefully
1.boot your phone into droidboot by pressing power + vol up
2.In your pc open asus flash tool
3.In asus flash tool choose model (P400CG) Wipe data (yes) and choose the raw file
http://s10.postimg.org/7ybzsv0xl/Step_1.jpg
4.plug your phone to your pc/laptop
5.after you plug your phone you will see a serial number , and click your device
http://s30.postimg.org/729moup4h/Step_2.jpg
6.start flashing
http://s27.postimg.org/shru3ater/Step.jpg
7.after flashing ,your phone will automatically reboot
8.Enjoy
Thanks guys
or just place raw file in ext sd card and perform SD download from droidboot
Yep..
Sent from my ASUS_T00I using XDA Free mobile app
Cant make use of AFT
I am unable to select the downloaded .raw file in AFT.
the only supported formats are .img or .zip
how can I flash the stock .raw file.
nor the SD DOWNLOAD in Droidboot mode recognizes this raw.file
I have tried to download it more than 4 times thinking that file might have currupt. but same result every time.
Please help
Edit:
anyways I got to learn how to select the file but now when I connect my device to PC in droidboot mode, error message pops asking to close AFT. I can Ignore the error msg to keep it running but No device is being detected in AFT.
That error comes every time I connect or remove device from PC.
This is where I need help.
or simple suggest me a full solution o below situation:
Device ASUS ZENFONE 4_T00I
Last working firmware was Jellybean 4.2.2 (never upgraded)
Problem started: Consistent FC msgs of almost all msgs.
1. Droidboot State
Droidboot Version: 6.6.3.0
Product : WW_ZENFON
Not Rooted. No Custom Recovery
2. Device Status: Was on Stock Jelly bean and was contineously giving com.android.phone failure and other FC closure consistently , hence needed to try flasing a new rom or same version.
3. Read the forums and collected following data:
Stock Firmwares:
UL-ASUS_T00I-WW-6.6.3.0_user.zip
UL-ASUS_T00I-WW-7.4.4.0-user.zip
UL-ASUS_T00I-WW-9.9.9.0-user
Raw Firmware:
Zenfone4V4.3.10.raw
4. All the Tools required to flash the firmwares and study of methods to do so. I used WIN-XP and tools installed on the same. All Drivers installed successfully device recognizing and able to use fastboot and adb.
5.Current device status: To flash UL-ASUS_T00I-WW-6.6.3.0_user.zip
I tried following methods :
FW placed on SD Flashing started but failed everytime
Tried Fastboot flash update FW.zip method by cleaning all partitions- Failed "Problem in creating otp update file-error)
Now left with no system, no userdata or no data partitions on device.
Now trying AFT method to flash .raw firmware which I have downloaded.
AFT not at all listing up my device in Droidbot mode.
VioletR said:
I am unable to select the downloaded .raw file in AFT.
the only supported formats are .img or .zip
how can I flash the stock .raw file.
nor the SD DOWNLOAD in Droidboot mode recognizes this raw.file
I have tried to download it more than 4 times thinking that file might have currupt. but same result every time.
Please help
Edit:
anyways I got to learn how to select the file but now when I connect my device to PC in droidboot mode, error message pops asking to close AFT. I can Ignore the error msg to keep it running but No device is being detected in AFT.
That error comes every time I connect or remove device from PC.
This is where I need help.
or simple suggest me a full solution o below situation:
Device ASUS ZENFONE 4_T00I
Last working firmware was Jellybean 4.2.2 (never upgraded)
Problem started: Consistent FC msgs of almost all msgs.
1. Droidboot State
Droidboot Version: 6.6.3.0
Product : WW_ZENFON
Not Rooted. No Custom Recovery
2. Device Status: Was on Stock Jelly bean and was contineously giving com.android.phone failure and other FC closure consistently , hence needed to try flasing a new rom or same version.
3. Read the forums and collected following data:
Stock Firmwares:
UL-ASUS_T00I-WW-6.6.3.0_user.zip
UL-ASUS_T00I-WW-7.4.4.0-user.zip
UL-ASUS_T00I-WW-9.9.9.0-user
Raw Firmware:
Zenfone4V4.3.10.raw
4. All the Tools required to flash the firmwares and study of methods to do so. I used WIN-XP and tools installed on the same. All Drivers installed successfully device recognizing and able to use fastboot and adb.
5.Current device status: To flash UL-ASUS_T00I-WW-6.6.3.0_user.zip
I tried following methods :
FW placed on SD Flashing started but failed everytime
Tried Fastboot flash update FW.zip method by cleaning all partitions- Failed "Problem in creating otp update file-error)
Now left with no system, no userdata or no data partitions on device.
Now trying AFT method to flash .raw firmware which I have downloaded.
AFT not at all listing up my device in Droidbot mode.
Click to expand...
Click to collapse
You need AFT version 1.0.0.0 for RAW files. See here: http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=3567
Solved
I flashed v6.3.5.0.img.gz successfully using droidboot.
Thanx a lot.
Now i an on Lollipop v7.4.4.0 thanx for all help
Solved
Root
Does it require root permissions ? Because i have heard that flasing like this can burn the motherboard please tell ... :crying::crying:
No it can if u flash it 100or200 times
I jab flashed roms in my ZenFone 400cg 90 to 110 times either cm or zenui.. lol... nothing happened
Sent from my ASUS_T00I using XDA Free mobile app
thank you so much Techjohn9 and other guys, this thread is really helpfull...
but my navigation buttons (home, back and window toggle) are not working......
please suggest me some solutions ...
I'm using Asus zenfone 4 a400cg mobile droid version 6.6.3 WW I downloaded UL Asus tool firmware 6.6.3 WW and tried to flash error msg coming like image SKU is not match help me to solve this problem
I actually downgraded from lollipop to jellybean,flashing was successful. But the problem is now the back,home and multitask touchpads are not working. It was working fine in the lollipop version, i don't know what happened. Please help me...
I've the same problem. Do you have any remedy?
VioletR said:
I flashed v6.3.5.0.img.gz successfully using droidboot.
Thanx a lot.
Now i an on Lollipop v7.4.4.0 thanx for all help
Solved
Click to expand...
Click to collapse
Give me img v6.3.5, Please.
No man it is not working this time my mobile got stuck in bootloop
Update
mrvj123 said:
thank you so much Techjohn9 and other guys, this thread is really helpfull...
but my navigation buttons (home, back and window toggle) are not working......
please suggest me some solutions ...
Click to expand...
Click to collapse
Update your Asus Zenfone 4 > UL-ASUS_T00I-WW-6.6.3.0-user :laugh: :good:
mrvj123 said:
thank you so much techjohn9 and other guys, this thread is really helpfull...
But my navigation buttons (home, back and window toggle) are not working......
Please suggest me some solutions ...
Click to expand...
Click to collapse
bro u got any fix?
The links in the OP are absolute poison!
Are the files available from any other source?
Where can I find ASUS_BUNDLE.ZIP which droidboot requires?
Hello ! I've tried to unlock bootloader at first and succeeded in that when i was on the lollipop . Unlocking is done by the unlock tool provided by the ASUS Officials.
Then i flashed the cynogen 12.1 unofficial via a boot.img , atwrp v3.img & a system.img.
Everything was fine until i needed to revert back to stock firmware.
And also everytime when i try to boot into recovery via Power & volume (-) button , it boots into system.
I used "adb reboot recovery" to boot into twrp recovery .
So, to revert back i saw a method in which we flash a raw firmware , and i downloaded a 4.0.3 for Asus Zenfone 4.
But after flashing it , the bootloader i unlocked , got locked by itself (means i can open droid boot but cannot modify boot and recovery partition via "fastboot flash boot boot.img" & "fastboot flash recovery recovery.img" ).
I can only flash system via " fastboot flash system system.img".
I tried to unlock it on Jelly Bean but no success.
Also i tried updating the firmawre via OTA and flashing zip in recovery mode but i was not able to boot into recovery mode, even with "adb reboot recovery".
It always ends up with a reboot , then booting into a 'Android logo for 200 to 300 millisec' , & then boot into system.
Then i found a KitKat firmware raw file , but when i flashed it via AFT 1.0.0.0 , it always gives error "no space left for flashing modem binary".
I tried "fastboot erase data" ,"fastboot erase userdata" ,"fastboot erase cache" , & "fastboot erase system" , but ended up with stock rom with no modem binary.
So , i tried to unlock the bootloader again by the "unlock tool" provided by ASUS , but even after connected to a high speed Wifi , It gives connection error and rest of the other things are working fine like browser etc.
I also tried to flash the modem.zip inside the stock firmware zip via fastboot as : "fastboot flash update modem.zip. It has flashed the zip but still no modem binary.
Then i tried to flash the bin file inside the modem.zip as : fastboot flash radio radio_firmware.bin and it gives error : No space left for flashing modem binary.
Now i have a bootloader (locked) but no recovery and a stock firmware with no modem binary.
Cn to ww
Hello, I have a big issue with my zenfone4 max plus zc550tl. I received the phone with a CN rom and after update to new version I lost all languages except chinese and english and every google apps. Someone can help me? I need to change my rom from CN to WW or to recovery old Rom 18. Help!!
AlfredDispi said:
Hello, I have a big issue with my zenfone4 max plus zc550tl. I received the phone with a CN rom and after update to new version I lost all languages except chinese and english and every google apps. Someone can help me? I need to change my rom from CN to WW or to recovery old Rom 18. Help!!
Click to expand...
Click to collapse
This forum is only for Asus Zenfone 4 A400CG and A450CG; which is a 4 year old device; and should not be confused with the new Zenfone 4(s).
I messed up my v40 405ebw, itry to cross flash it to korean version 409n using lgup partition dl but now it is not usable, an error always pop up and I can't access about phone, i try to flash it via refurbish but it includes error not support for cross flash please help me to restore my v40..
you may download and install the below LGUP, then replace the files in the lgup forlder in your program files with the one in "LGUP_to be copied into LGUP folder", then run LGUP you'll be able to crossflash to your European kdz again.
drive.google .com/file/d/1mmap7NZAdNXXz1TIZTDv7XEuqEqyR9JA/view?usp=sharing
ps. remove spaces in the link
hope it helps.
I have korean version V40 (30f).
I have destroyed my firmware by flashing wrong things in wrong partitions.
As an last ditch effort, i flashed 30c (dont know which version, probably pie) adb, boot, dtbo and laf files to get into download mode, so i could get into download mode again.
But in download mode, when i try to flash the original kdz (Android Q), following error occurs, which i successfully flashed before this.
I tried different 30f kdz, but error shows up i only could use skt_kr version
Any idea why? Should i download Pie or Oreo version of it?
I have to wait 24 hours since i already exceeded download quota of the day.
SUCCESS!
For anyone having problem with LGUP
Use this, it bypass crossflash protection.
[STOCK][CROSSFLASH][GUIDE] How to install Stock Rom (or crossflash) using LG UP
This is a guide on how to install Stock Rom or Crossflash on any LG G7 ThinQ (Except for G710TM and G710V) Please read everything written down and on the second post before asking questions! Before we do anything i have to explain some stuff...
forum.xda-developers.com
Hello everyone, i'm trying to recovery my poco m3 pro 5g, after a failed flash a china rom,
i have a unlocked bootloader, and when i try flash thogh MIFlash tool, i get a sucess message,
but when i try to boot the system, when start show the miui logo, it crash, then return to recovery mode,
i'm tying to flash camellia_in_global_images_V12.5.3.0.RKSINXM_20220210.0000.00_11.0_in_7f8fba4c4c
i already tried use SP Flash tool, but i cannot select the scatter, i get a message saing that this scatter isn't compatible with this vesion, please update, but the SP is the latest version that i've found
any help is appreciated, (sorry for the bad english)
have you tried simply miflash? is the easyest way
Yonecloud said:
Hello everyone, i'm trying to recovery my poco m3 pro 5g, after a failed flash a china rom,
i have a unlocked bootloader, and when i try flash thogh MIFlash tool, i get a sucess message,
but when i try to boot the system, when start show the miui logo, it crash, then return to recovery mode,
i'm tying to flash camellia_in_global_images_V12.5.3.0.RKSINXM_20220210.0000.00_11.0_in_7f8fba4c4c
i already tried use SP Flash tool, but i cannot select the scatter, i get a message saing that this scatter isn't compatible with this vesion, please update, but the SP is the latest version that i've found
any help is appreciated, (sorry for the bad english)
Click to expand...
Click to collapse
Maybe you can try older version of SPflash.
I've been trying to flash stock ROM using .zip fastboot files from
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
They all seem to come in a payload format, which is not recognised by Xiaomi Flash Tool. What am I doing wrong?
Ok, I've figured it out. Here you can find the latest global ROM and Xiaomi Flash Tool
https://c.mi.com/in/miuidownload/detail?guide=2
Fasboot drivers can be downloaded from here
http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
This seems to be the cleanest way of doing it
Yonecloud said:
Hello everyone, i'm trying to recovery my poco m3 pro 5g, after a failed flash a china rom,
i have a unlocked bootloader, and when i try flash thogh MIFlash tool, i get a sucess message,
but when i try to boot the system, when start show the miui logo, it crash, then return to recovery mode,
i'm tying to flash camellia_in_global_images_V12.5.3.0.RKSINXM_20220210.0000.00_11.0_in_7f8fba4c4c
i already tried use SP Flash tool, but i cannot select the scatter, i get a message saing that this scatter isn't compatible with this vesion, please update, but the SP is the latest version that i've found
any help is appreciated, (sorry for the bad english)
Click to expand...
Click to collapse
you may have a corrupted dowlnoad ... download it again and extract it with another tool some times it will help
and if you wanna use sp flashtool dont use the latest version of sp flash tools use https://spflashtools.com/windows/sp-flash-tool-v5-2208
and dont wory you will be ok it had this problem so many times