Related
OMGOGOMOGMOGM SOMEONE PLEASE HELP
I just flashed the aokp rom http://forum.xda-developers.com/showthread.php?t=2250601&page=12 with safestrap recovery thing a majiger cant remember the name of it but anyway, i flashed it and when i tapped reboot it comes up with a black screen showing this format
Invalid flash mode (s)
10..9b(*) (sha-5b08bc, 2012-12-03:10:39)
eMMC info: size 8gb
Device is LOCKED, Status code: 0
Battery Low:
Transfer Mode:
USB connected
Failed to hab check for boot: 0x56
Fastboot Reason: Boot Failure
usb Connected
This is exactly whats on my screen right now and its scaring the hell out of me, SOMEONE PLEASE HELP I DID EVERY INSTRUCTION TO FLASHING THE ROM WITH THE RECOVERY IM USING AND THIS HAPPENED.
:crying ::crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying:
Face palm man. You need an unlocked bootloader for that rom says so in the info so you clearly didn't follow directions like you said to such as using cwm not safestrap. This is why we must read before acting hastily. You may be able to use rsd to flash stock but don't count on it.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Face palm man. You need an unlocked bootloader for that rom says so in the info so you clearly didn't follow directions like you said to such as using cwm not safestrap. This is why we must read before acting hastily. You may be able to use rsd to flash stock but don't count on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
yea i was gonna say the same i also think new people see that safestrap thread thats stickied which is why they install ss and not cmw.
Sent from my MB886 using xda premium
This might help: http://forum.xda-developers.com/showthread.php?t=2231249
deeje00 said:
Face palm man. You need an unlocked bootloader for that rom says so in the info so you clearly didn't follow directions like you said to such as using cwm not safestrap. This is why we must read before acting hastily. You may be able to use rsd to flash stock but don't count on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
i actually have the same problem. My phone is unlocked before already, but the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode...
do you know how i can figure this out?
legendnexus said:
i actually have the same problem. My phone is unlocked before already, but the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode...
do you know how i can figure this out?
Click to expand...
Click to collapse
Did you flash a rom using Safestrap too?
audit13 said:
Did you flash a rom using Safestrap too?
Click to expand...
Click to collapse
is it a right source to try?
http://forum.xda-developers.com/showthread.php?t=1995220
legendnexus said:
is it a right source to try?
http://forum.xda-developers.com/showthread.php?t=1995220
Click to expand...
Click to collapse
That thread is for locked bootloaders. Do you have a locked bootloader? Did you flash a rom using safestrap?
Did you try this? http://forum.xda-developers.com/showthread.php?t=2231249
Or this? http://forum.xda-developers.com/showthread.php?t=2262726
audit13 said:
That thread is for locked bootloaders. Do you have a locked bootloader? Did you flash a rom using safestrap?
Did you try this? http://forum.xda-developers.com/showthread.php?t=2231249
Or this? http://forum.xda-developers.com/showthread.php?t=2262726
Click to expand...
Click to collapse
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
legendnexus said:
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
Click to expand...
Click to collapse
Damn, seems like those are the only two methods that could work.
The good thing is that you can't re-lock the bootloader.
You might want to send a PM to skeevy to see if he can help.
Is there any warranty left on your phone? I've seen posts where people were able to go back to AT&T to exchange the phone or send it in for repair.
legendnexus said:
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
Click to expand...
Click to collapse
How have you tried to get into fastboot? Try turning your phone off, hold both volume buttons and press the power button a few times then use volume down to scroll to "ap fastboot" and use volume up to select.
Sent from my MB886 using Tapatalk
When you plug in the phone to charge do you see at least the boot logo?
may need to connect pins 1 & 4 together in micro usb charger port to phone within the plug itself and it will charge.
Swiftb12305 said:
yea i was gonna say the same i also think new people see that safestrap thread thats stickied which is why they install ss and not cmw.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
I feel like it's causing more problems than it's solving with new people that try to flash their phones, they see light at the end of the tunnel and assume it's the exit, when in fact it's a dadgum train.
legendnexus said:
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
Click to expand...
Click to collapse
Have you tried a fastboot cable?
audit13 said:
Damn, seems like those are the only two methods that could work.
The good thing is that you can't re-lock the bootloader.
You might want to send a PM to skeevy to see if he can help.
Is there any warranty left on your phone? I've seen posts where people were able to go back to AT&T to exchange the phone or send it in for repair.
Click to expand...
Click to collapse
nope no warranty left..
penser said:
How have you tried to get into fastboot? Try turning your phone off, hold both volume buttons and press the power button a few times then use volume down to scroll to "ap fastboot" and use volume up to select.
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
exactly the same way you wrote. but unfortunately it doesnt work.
SVLAN said:
When you plug in the phone to charge do you see at least the boot logo?
Click to expand...
Click to collapse
ahahaha nothing!! no single pixel power up, forget about the logo lol
HD-man said:
may need to connect pins 1 & 4 together in micro usb charger port to phone within the plug itself and it will charge.
Click to expand...
Click to collapse
anthony2424 said:
Have you tried a fastboot cable?
Click to expand...
Click to collapse
I research on that i guess fasboot cable is connecting the pins 1 & 4 together in micro usb cable. I tried that too, however result is the same.
doesnt work.
That was my last hope (fastboot cable), so i even try other combinations connecting different pins together, but it didnt work too )))
I have a beautiful brick as you guys can understand.
I am thinking to order a broken lcd atrix hd online and replace the boards right now. Do you guys think it is logical?
or like replacing the storage with a used one.
I dont know what else to do, out of ideas
I am aware I haven't replied in a while, my atrix had a hardware issue, but I got a nexus 10!! Anyways, when plugging the phone in does the LED light up green?
Sent from my Nexus 10 using XDA Premium 4 mobile app
Nope, no lights
Sent from my Nexus 5 using Tapatalk
Hm sounds like a hardware issue, check the pins in the phones micro USB port if other cables don't make a the LED turn green while the phone is off.
Sent from my Nexus 10 using XDA Premium 4 mobile app
Hi guys, my friend's Atrix HD is in a trouble, exactly as the post title say. He device has bl locked again with no system to boot, there's some way to install a rom in this situation?
Any way to get into fastboot? If you can get into fastboot, try flashing a stock ROM with RSD Lite.
Myth tools will adb a rom over if you can get into the boot loader
Hard Bricked Atrix HD MB886
oscar the grouch said:
Myth tools will adb a rom over if you can get into the boot loader
Click to expand...
Click to collapse
Hi, I have tried everything, even I bought the fastboot cable and it can give it life to my phone. Fail on RSD, MYThool, on Cmd with fastboot.
[Q] Enable USB Debugging mode with fastboot or adb commands?
audit13 said:
Any way to get into fastboot? If you can get into fastboot, try flashing a stock ROM with RSD Lite.
Click to expand...
Click to collapse
It not seems to work, i can get into adb via stock recovery and can get fastboot normally. My question is: Is it possible to enable usb debugging mode using adb or fastboot commands?
ErickST18 said:
My question is: Is it possible to enable usb debugging mode using adb or fastboot commands?
Click to expand...
Click to collapse
No, it is not possible. This would be a massive security issue, as it would defeat the entire purpose of having that setting in the phone, since it would allow full access to your phone without logging into the OS.
Pro-tip: You should really leave that setting turned off until you actually need it, because otherwise anyone can plug in a USB cable and get full access to send fastboot commands to your device (including bypassing lock screens).
quasihellfish said:
No, it is not possible. This would be a massive security issue, as it would defeat the entire purpose of having that setting in the phone, since it would allow full access to your phone without logging into the OS.
Pro-tip: You should really leave that setting turned off until you actually need it, because otherwise anyone can plug in a USB cable and get full access to send fastboot commands to your device (including bypassing lock screens).
Click to expand...
Click to collapse
Thank you for the reply bro. The thing is, i'm giving this error and i don't know what to do, it's driving me crazy. Hope you can help me, i've attached a image with screen error below.
ErickST18 said:
Thank you for the reply bro. The thing is, i'm giving this error and i don't know what to do, it's driving me crazy. Hope you can help me, i've attached a image with screen error below.
Click to expand...
Click to collapse
No idea. Looks like you need to contact the dealer
ErickST18 said:
Thank you for the reply bro. The thing is, i'm giving this error and i don't know what to do, it's driving me crazy. Hope you can help me, i've attached a image with screen error below.
Click to expand...
Click to collapse
I think this is like a hard brick, but worse. I think its a dead device and at minimum needs its motherboard replaced with a new/used one that has a working ROM on it.
palmbeach05 said:
I think this is like a hard brick, but worse. I think its a dead device and at minimum needs its motherboard replaced with a new/used one that has a working ROM on it.
Click to expand...
Click to collapse
As i thought, well thank you for the reply. I'll keep trying anyway.
...and I thought it had worked but as it turns out, it did not. I found out it did not when I tried to root to which the phone proceeded to tell me it was lock.
Now, when I go into Recovery Mode, the phone does not come up in ADB even when trying to unlock after using the ASUS unlocker tool... Is the ADB bridge fried forever? How do I reinstate it to be able to root? I don't mind wiping, I just want to recover the possibility to root. Any way to do that? God I feel dumb right now...
Edit: I've gotten ADB to recognize the phone in Recovery Mode by installing the exact Manufacturer and Model ADB drivers but the second I get into Fastboot mode, it's like the side USB-C suddenly becomes non-existent, same goes for the bottom one. Feels like a kill.switch from ASUS to me :/
Edit 2: Is there a way to flash while in Recovery? Or in normal OS operations? (sounds like a bad idea but I'm out of ideas as of now)
So neither of the two USB ports in the phone seem to work for you in bootloader mode?
dennis96411 said:
So neither of the two USB ports in the phone seem to work for you in bootloader mode?
Click to expand...
Click to collapse
Exactly, the bootloader is also unlocked after using ASUS's tool .apk, I am on 1910.44 WW, I tried different ADB's while in Windows, tried to copy DeviceID, it all works when in normal boot OR in recovery mode but the second I am in fastboot mode, both USB's stop working. As if ASUS locked the access when I mistakenly tried to gain root while the bootloader was locked. Maybe if I could lock it back but that would require me being in fastboot afaik.
Can I lock it back while in recovery? If so, what would be the prompt?
I would be very careful about locking the bootloader at this point. I heard it can cause a brick if the planets aren't aligned correctly.
Jokes aside, does device manager refresh itself when you plug or unplug the phone in fastboot mode? That would indicate it saw something from the phone.
dennis96411 said:
I would be very careful about locking the bootloader at this point. I heard it can cause a brick if the planets aren't aligned correctly.
Jokes aside, does device manager refresh itself when you plug or unplug the phone in fastboot mode? That would indicate it saw something from the phone.
Click to expand...
Click to collapse
Sadly no, tried 3 different computers, a plethora of cables, different USB ports. It's like the Fastboot killed the function altogether so as of now, I have yet to find a way to get the phone recognized while in fastboot.
WhyKlwd said:
Sadly no, tried 3 different computers, a plethora of cables, different USB ports. It's like the Fastboot killed the function altogether so as of now, I have yet to find a way to get the phone recognized while in fastboot.
Click to expand...
Click to collapse
Is there an option to apply a full OTA from the stock recovery?
dennis96411 said:
Is there an option to apply a full OTA from the stock recovery?
Click to expand...
Click to collapse
Before anything, thanks for helping, it's greatly appreciated!
So, no sadly, when I get in Recovery Mode my options are:
Reboot system now
Reboot to bootloader
Wipe data/factory reset
Power off
As anyone would, I tried kicking into bootloader from recovery hoping that it would trigger something different to give me fastboot but to no avail, I wiped a couple of times as well, that didn't pan out.
Edit: I feel like my best chance at this point is when ASUS releases a new WW firmware update, that it HOPEFULLY brings Fastboot Mode to it's original value... But according to a thread somewhere on XDA, it does not install a full partitioned recovery so I'm not having my hopes up...
The other thing would be to butcher a USB-C cable and see if I get a response when connected on the orange USB-C but that's also a risk to take. So that doesn't work, that USB-C gets no response whatsoever.
What firmware version are you on? You could try grabbing the stock firmware zip of the firmware you're on now from https://www.asus.com/Phone/ROG-Phone-II/HelpDesk_Download/, and increase the firmware version in the zip name - for example, if you're on the latest .44 build now, change the .44 in the zip name to .45. Then simply push it to the root of your internal storage, and reboot. After boot you should get a message that a system update file has been found, and that you can install it.
I don't know if this will fix your problem, but it should reflash the stock partitions. And yes, it's true that it far from flashes all partitions, but it's worth a try at least.
HomerSp said:
What firmware version are you on? You could try grabbing the stock firmware zip of the firmware you're on now from https://www.asus.com/Phone/ROG-Phone-II/HelpDesk_Download/, and increase the firmware version in the zip name - for example, if you're on the latest .44 build now, change the .44 in the zip name to .45. Then simply push it to the root of your internal storage, and reboot. After boot you should get a message that a system update file has been found, and that you can install it.
I don't know if this will fix your problem, but it should reflash the stock partitions. And yes, it's true that it far from flashes all partitions, but it's worth a try at least.
Click to expand...
Click to collapse
I did put the stock firmware but I hadn't thought of changing the name to "force" the phone to try and update! Sadly, when it reached 100%, it said install failed and while trying fastboot mode, it still didn't restore ADB but that was brilliant and definitely worth the try. Thanks for your suggestion, here's hoping the next legit firmware will do it!
EDIT: AND YET IT DID WORK!!! That must have fixed it after all... I unplugged, replugged while in bootloader and finally, that USB chime! T-T
Thanks both of you for your suggestions, 3 brains work better than one!
WhyKlwd said:
I did put the stock firmware but I hadn't thought of changing the name to "force" the phone to try and update! Sadly, when it reached 100%, it said install failed and while trying fastboot mode, it still didn't restore ADB but that was brilliant and definitely worth the try. Thanks for your suggestion, here's hoping the next legit firmware will do it!
EDIT: AND YET IT DID WORK!!! That must have fixed it after all... I unplugged, replugged while in bootloader and finally, that USB chime! T-T
Thanks both of you for your suggestions, 3 brains work better than one!
Click to expand...
Click to collapse
Nice, glad to see it worked! I tried it myself and it also said update failed, but it had flashed, so I think the error message may just be because the firmware version doesn't change.
I'm assuming fastboot works now then? Do keep in mind that you'll need the abl, xbl and xbl_config images from the edl unlock thread to be able to actually unlock the bootloader without using the Asus tool.
HomerSp said:
Nice, glad to see it worked! I tried it myself and it also said update failed, but it had flashed, so I think the error message may just be because the firmware version doesn't change.
I'm assuming fastboot works now then? Do keep in mind that you'll need the abl, xbl and xbl_config images from the edl unlock thread to be able to actually unlock the bootloader without using the Asus tool.
Click to expand...
Click to collapse
Yeah it works, or at least it did long enough for me to be able to root. I haven't tried it since but I would assume that it fixed it, tomorrow I'll most likely do a RAW flash to fix all potential risks as well as try the latest CN firmware. EDL never worked, that's what got me in that situation in the first place... well that and me not paying full attention.
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
thank you for reaching out to me, however, i tried the combo you suggested, but its stuck on the Black screen. but it does connect to the computer. i also tried the miflash tools, and im getting the red Bar.
Kenora_I said:
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
Click to expand...
Click to collapse
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
i also spent Hours trying to flash it back with the miflash tool and continue to get HELLO POCKET Error plus a few other things it keep saying. Basically getting red bar error. and the coms plus drivers are downloaded correctly. i also tried all my ports. SMH.
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happened to have his info?
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happend to have his info? and thanks for your reply and Help brother
LowaEastSide said:
would you happend to have his info? and thanks for your reply and Help brother
Click to expand...
Click to collapse
so you was stuck in a black screen as well?
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
yeah let me grab his details (he's on telegram) and yeah i was stuck on a black screen too. he was able to remote onto my computer and fix the hello packet error or write error i was getting and was able to get the edl mode flash and my phone booted up afterwards
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Yeah, I wouldn't endorse it but you can only get someone like that to fix it. Also, try paying half at the start and rest in the end cause ya don't wanna get scammed
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=V8xiNoWz-Yw Tried this ? This is for global but grab a chinese version and follow the install guide
skyler13 said:
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Click to expand...
Click to collapse
Listen, I would like to thank you for helping me out Brother. I was able to reach out to the person you recommend, however he took a few hours to respond back to be. By the time he did I already had some I found on YouTube do for me remotely as well. Only chargers me $40 US. Im pretty sure I would have been able to haggle him down but figured it was a fare price. He also was kind enough to flash the globle 12.5 ROM as well. On that note, would you know if I'll be able to receive OTA updates? Or will I have to install TWRP RECOVERY and flash the new updates when they come out.? Thanks again for your help brother.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
Problem Fixes, thanks to
Ganga -->>> [email protected]> Thanks my Brother, very honest and Knowledgeable with the Xioami Mi 11. I was VERY happy that I did have to remove the back Glass and find the 2 copper prongs like other people were forced to do. Bless.
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
There's no such thing as "bricked" in 2021... even if you have to flash it via EDL, still not bricked.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
I had same situation on Redmi K20 Pro. You'll need to flash it using Mi Flash with a dev account via EDL.
And after flashing global rom, never neeever NEVER lock it back when not having chinese rom on a chinese phone.
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Pikaone41 said:
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Click to expand...
Click to collapse
Thanks you for the EDL firmware. I will download it and just in case I'll ever need it in the future. Plus I'll keep you in mind if ever I need help in the future. Honestly, I never had such a hard time reflashing a device stuck in bootloop. I've flashed so many devices in my life time but never came across such a difficult device to repair. More thank likely I'll be sticking to OnePlus. Much easier.