Related
Guys, what would be the latest TWRP for our SM-G920T, and where would I find an Odin-flashable TWRP file? (Somehow I do not trust TWRP Manager with the task of flashing TWRP.)
Just in case it matters, I am currently rooted on the latest DOI1 FW.
Aqua1ung said:
Guys, what would be the latest TWRP for our SM-G920T, and where would I find an Odin-flashable TWRP file? (Somehow I do not trust TWRP Manager with the task of flashing TWRP.)
Just in case it matters, I am currently rooted on the latest DOI1 FW.
Click to expand...
Click to collapse
https://dl.twrp.me/zeroflte/
datdirtyscrew said:
https://dl.twrp.me/zeroflte/
Click to expand...
Click to collapse
Thank you! One of the things that I find irritating about TWRP Manager is that it asks me to confirm/verify the partition where TWRP gets flashed to. Now how can I possibly know if dev/block/platform/15570000.ufs/by-name/RECOVERY is the right place for my device? (Is it?) The second thing that bothers me about TWRP Manager is that it doesn't correctly detect the latest TWRP version, and often it offers to install an older version.
Did twrp-2.8.7.2-zeroflte.img.tar work for you?
After updating to DOI1, I get boot loops after trying to flash TWRP.
I can get into recovery and download mode just fine, but it won't boot to the OS.
RiskPrime said:
Did twrp-2.8.7.2-zeroflte.img.tar work for you? After updating to DOI1, I get boot loops after trying to flash TWRP. I can get into recovery and download mode just fine, but it won't boot to the OS.
Click to expand...
Click to collapse
I bit the bullet eventually (sesing as flashing TWRP via ODIN is a PITA), and flashed TWRP using TWRP Manager. I got an error message upon flashing, though it looks like TWRP flashed just fine. (Go figure!) Anyway, TWRP Manager flashes TWRP 2.8.7.1. It may be that TWRP people didn't consider TWRP 2.8.7.2 safe enough to flash, which is why TWRP Manager doesn't offer the option. That may be your explanation for your troubles.
Backup your stock recovery per this post. If you are too lazy, I can upload my backup from .104 build (C432) to Mega.
Download twrp_bkl_0.7.img from this post and place it in same directory with your ADB.
After successful backup as precaution disable any locks like pattern/PIN/password/fingerprint, reboot to bootloader (fastboot):
Code:
adb reboot bootloader
Then flash new TWRP recovery:
Code:
fastboot flash recovery_ramdisk twrp_bkl_0.7.img
After successful flash reboot device and immediately after confirming command below unplug USB cable and HOLD and keep holding VOLUME UP button, if you won't the new recovery will be overwritten by stock and you can try again.
Code:
fastboot reboot
Tested by myself on Honor 10 8.1.0.104 (C432) with unlocked bootloader and installed already Magisk 16.4 with Magisk manager 5.7.0, Magisk ramdisk persisted after installing TWRP recovery, system boots normal.
Next step after unlocking BL, installing Magisk, installing TWRP recovery -> flashing GSI AOSP, LOS or RR. Only reason I bothered with installing TWRP was that GSI image of LOS and RR don't include opengapps, only AOSP does, so without TWRP you can't have opengapps with these two GSI ROMS.
PeterMarkoff said:
Backup your stock recovery per this post. If you are too lazy, I can upload my backup from .104 build (C432) to Mega.
Download twrp_bkl_0.7.img from this post and place it in same directory with your ADB.
After successful backup as precaution disable any locks like pattern/PIN/password/fingerprint, reboot to bootloader (fastboot):
Code:
adb reboot bootloader
Then flash new TWRP recovery:
Code:
fastboot flash recovery_ramdisk twrp_bkl_0.7.img
After successful flash reboot device and immediately after confirming command below unplug USB cable and HOLD and keep holding VOLUME UP button, if you won't the new recovery will be overwritten by stock and you can try again.
Code:
fastboot reboot
Tested by myself on Honor 10 8.1.0.104 (C432) with unlocked bootloader and installed already Magisk 16.4 with Magisk manager 5.7.0, Magisk ramdisk persisted after installing TWRP recovery, system boots normal.
Next step after unlocking BL, installing Magisk, installing TWRP recovery -> flashing GSI AOSP, LOS or RR. Only reason I bothered with installing TWRP was that GSI image of LOS and RR don't include opengapps, only AOSP does, so without TWRP you can't have opengapps with these two GSI ROMS.
Click to expand...
Click to collapse
Nice work. ?
tried to install GSI RR OS, but ending in bootloop, also even after resizing system partition to maximum (TWRP / wipe / resize) opengapps still showing error 70 about insufficient space (which makes no sense, so they really seem to have wrong detection of A/B instead of A for Huawei/Honor devices), though these gzr gapps seem to install successfuly, now if I could figure out the damn bootloop
potential reasons for bootloop - previously installed magisk, wiped also system not only data/cache, installed through fastboot while TWRP there and not only stock recovery, ???
edit: i guess will try flash GSI through TWRP again, quite a waste time to wait each time like 9-10 minutes to find out it can't boot
edit 2: so even flashing through TWRP doesn't help, just stuck on android animation for 10 minutes and then it restarts (and even if you do fatory reset through huawei erecovery it doesnt change anything). maybe can try to restore everything and not wipe system before installing, just factory reset through TWRP (though I remember I read somewhere it's not reliable and it is better to do it through system, but I think that one wipe also internal storage which I wanna avoid)? back to rooted EMUI with TWRP for now, don't have time to try various combinations
edit 3: flashing over TWRP backup without wiping system doesn't help, so it seem it's gonna be magisk or replaced stock recovery i guess, otherwise no idea
BTW the lack of feedback here and trying from other users it's very depressing. they boasted million phone sales and i am the only one in the whole world trying to install TWRP and GSI ROM on this phone?
PeterMarkoff said:
BTW the lack of feedback here and trying from other users it's very depressing. they boasted million phone sales and i am the only one in the whole world trying to install TWRP and GSI ROM on this phone?
Click to expand...
Click to collapse
Don't be disappointed the lack of feedback from users is not many power users have got their hands on this model.
And also we are having different builds.
From the day one I am trying to rebrand my device but no success .
Once I have rebranded to EU I will try and let you know.
Did you flash open gapps nano package through twrp in gsi image?
Did it give you the same error?
tried just pico opengapps as on all phones i flash, that's the smallest, but always end up with error 70 not enough space despite resized system partition in TWRP and many GB available, the other unofficial GZR zero gapps build i mentioned seem to be flashed successful in TWRP, but in any case no luck with booting
PeterMarkoff said:
tried just pico opengapps as on all phones i flash, that's the smallest, but always end up with error 70 not enough space despite resized system partition in TWRP and many GB available, the other unofficial GZR zero gapps build i mentioned seem to be flashed successful in TWRP, but in any case no luck with booting
Click to expand...
Click to collapse
Did you format your phone before trying GSI ?
Try formatting phone and remove some system apps and then flash gapps it will mostly solve the problem.
PeterMarkoff said:
BTW the lack of feedback here and trying from other users it's very depressing. they boasted million phone sales and i am the only one in the whole world trying to install TWRP and GSI ROM on this phone?
Click to expand...
Click to collapse
Don't be upset – e.g. I didn't receive my Honor 10 yet. You won't be the only one for sure, you're just the first one to do it, which is super nice for others because it motivates them to do so as well!
Just wondering: does it make a difference for TWRP wether I own the 6gb or 4gb version?
miststudent2011 said:
Did you format your phone before trying GSI ?
Try formatting phone and remove some system apps and then flash gapps it will mostly solve the problem.
Click to expand...
Click to collapse
I did factory reset (data, both cache) and also wiped system partition, gapps would be the least issue, as I said that GZR should work, but my system doesn't boot, no matter how times I wipe everything through TWRP or stock recovery after flashing system.img, since they say it's normal to hang at first boot and then wipe and then it should boot, but it doesn't work for me. also of course tried to power off phone since some people said it helps to do it after flashing. what I haven't done it's fastboot -w which should be some better wipe. some people say also you should remove magisk ramdisk, though I forgot to back up original, backed up just stock recovery. and also I haven't tried to flash everything with stock recovery, though first flash I did was through fastboot anyway and not through TWRP and it didn't make difference
so last few things left to try:
- fastboot -w for total wipe of data (better than TWRP? though it should be same as Format data in TWRP which wipe everything including internal storage which I wanna avoid since backing up 15GB TWRP backup file it's kinda annoying and my system has problem to do it)
- flash with stock recovery (I have backup, no big deal)
- remove magisk ramdisk and flash with stock ramdisk (forgot to make backup, can't replace)
though I am tired of it for now, spend last night like 4 hours dealing with it until 2AM and I also need to take care of children
vollkornbaguette said:
Don't be upset – e.g. I didn't receive my Honor 10 yet. You won't be the only one for sure, you're just the first one to do it, which is super nice for others because it motivates them to do so as well!
Just wondering: does it make a difference for TWRP wether I own the 6gb or 4gb version?
Click to expand...
Click to collapse
I don't think RAM has something to do with anything, but that sounds like Chinese version since EU has always 4GB and only difference is storage, so you will have different ROM
PeterMarkoff said:
(...)
so last few things left to try:
- fastboot -w for total wipe of data (better than TWRP?)
- flash with stock recovery (I have backup, no big deal)
- remove magisk ramdisk and flash with stock ramdisk (forgot to make backup, can't replace)
Click to expand...
Click to collapse
So I just read more about the GSI/Treble stuff and it said somewhere that modifications like Magisk probably lead to problems with the GSI flash.
Which is why I would try to get rid of the magisk ramdisk first.
I'm not an expert in this at all but maybe this helps.
---
PeterMarkoff said:
I don't think RAM has something to do with anything, but that sounds like Chinese version since EU has always 4GB and only difference is storage, so you will have different ROM
Click to expand...
Click to collapse
Indeed I bought the chinese 6gb RAM Version (hope this won't turn out as a big mistake)
vollkornbaguette said:
So I just read more about the GSI/Treble stuff and it said somewhere that modifications like Magisk probably lead to problems with the GSI flash.
"Your device is free of any heavy modifications such as the
Click to expand...
Click to collapse
yeah, now if someone could extract for me from 0.104 firmware for C432 that stock ramdisk, because I have some problems with mega to download it and I just need the stock ramdisk, nothing else, I have stock recovery backup but forgot to make ramdisk backup
edit: completely forgot there is option to "Completely uninstall" in Magisk manager, so tried it though even after restart with magisk manager missing i could still use root apps, so not sure how exactly this "complete uninstall" works, but anyway giving it a try after this and wiping data, installed system.img again, again wiped, rebooted and as usual loading and loading and nothing, seem can't further continue without copy of stock ramdisk to flash, tried downloading the big update from mega to extract it but it always fail for me to download, same with trying to copy my TWRP backup because for sure ain't gonna doi fastboot -w and setting up everything from scratch in case even this doesn't help, if I knew it works for sure and it will load new system which I will have to set up then no problem, but in this case...
edit 2: tried to replace magisk ramdisk with ramdisk from Honor View 10 BKL09 (same as our working TWRP) but it seem I end up after flashing it, wiping and flashing system.img in TWRP/erecovery bootloop, it's not showing android booting logo like before (but hey at least no need to wait 10 minutes to find it's fail) and either go to huawei ercovery, if I perform factory reset there then it boots to TWRP, but can't boot anywhere else besides these two
pass
I requested this image. Recovery has been established. When I enter the recovery, it requires a password to decrypt the system partition, I enter it (the same after switching on the phone), but a message is displayed that the password is incorrect. help me please.
told you in OP disable all passwords before flashing
PeterMarkoff said:
yeah, now if someone could extract for me from 0.104 firmware for C432 that stock ramdisk, because I have some problems with mega to download it and I just need the stock ramdisk, nothing else, I have stock recovery backup but forgot to make ramdisk backup
edit: completely forgot there is option to "Completely uninstall" in Magisk manager, so tried it though even after restart with magisk manager missing i could still use root apps, so not sure how exactly this "complete uninstall" works, but anyway giving it a try after this and wiping data, installed system.img again, again wiped, rebooted and as usual loading and loading and nothing, seem can't further continue without copy of stock ramdisk to flash, tried downloading the big update from mega to extract it but it always fail for me to download, same with trying to copy my TWRP backup because for sure ain't gonna doi fastboot -w and setting up everything from scratch in case even this doesn't help, if I knew it works for sure and it will load new system which I will have to set up then no problem, but in this case...
edit 2: tried to replace magisk ramdisk with ramdisk from Honor View 10 BKL09 (same as our working TWRP) but it seem I end up after flashing it, wiping and flashing system.img in TWRP/erecovery bootloop, it's not showing android booting logo like before (but hey at least no need to wait 10 minutes to find it's fail) and either go to huawei ercovery, if I perform factory reset there then it boots to TWRP, but can't boot anywhere else besides these two
Click to expand...
Click to collapse
If you want, i have all the files of the C432 update but idk in wich .zip, folder the ramdisk is stored.
I can send on several clouds.
PeterMarkoff said:
told you in OP disable all passwords before flashing
Click to expand...
Click to collapse
Hey did you restore your device are you still struck at boot screen?
If yes try this method.
https://forum.xda-developers.com/huawei-p20/development/rebrand-huawei-p20-eml-l29-eml-l09-t3779283
How to GO back to stock emui(India) after i flash a treble rom? Do i need to backup using some tool?
PLease someone tell me
srharshajava said:
PLease someone tell me
Click to expand...
Click to collapse
The problem is currently we don't have full
ROM to revert to stock and if we brick our device there is no proper way to revert to stock.
Our model even doesn't have SD card support.
Just wait for some time for someone to provide proper way.
When i flash a treble rom, I have a bootloop. I returned back with eRecovery directly on the phone.
miststudent2011 said:
The problem is currently we don't have full
ROM to revert to stock and if we brick our device there is no proper way to revert to stock.
Our model even doesn't have SD card support.
Just wait for some time for someone to provide proper way.
Click to expand...
Click to collapse
We do have a way to download full ROM.
http://pro-teammt.ru/firmware-database/?firmware_model=COL-L29C432
1. Search here for your exact model (change numbers after C432 to find ROM for your phone) and search for your rom version (B104 or B120)
2. Double click on "filelist" on the same row as FullOTA-MF
3. From filelist link menu download update.zip file (it should be really big, like 2+GB)
3. Extract UPDATE.APP file somewhere (eg. Desktop)
4. In settings of HuaweiUpdateExtractor (link: https://forum.xda-developers.com/showthread.php?t=2433454) uncheck "verify header checksum" and open UPDATE.APP
5. Extract any img (Be it ramdisk.img, ramdisk_recovery.img or system.img) file that you need from UPDATE.APP via HuaweiUpdateExtractor
You just got whoole stock rom and img files that you can flash. Tested by myself with flashing back original ramdisk, ramdisk_recovery and system.img and everything worked well.
Hi everyone, when I install the TWRP using the flashable zip installer and then boot into TWRP it gets stuck in the TWRP logo and when I flash from fastboot it works fine, but I need to install it from flashable zip because I TWRP the I have to start with the partition slot A that also has the custom rom, I can't always change slot partitions every time I have to do operations with the TWRP.
I would also like to note that using the twrp-installer-jasmine_sprout-3.2.3.zip results in the recovery mode sitting on the TWRP logo even if it was a successful install.
I'm hoping someone can find a fix to this soon.
XRed_CubeX said:
Hi everyone, when I install the TWRP using the flashable zip installer and then boot into TWRP it gets stuck in the TWRP logo and when I flash from fastboot it works fine, but I need to install it from flashable zip because I TWRP the I have to start with the partition slot A that also has the custom rom, I can't always change slot partitions every time I have to do operations with the TWRP.
Click to expand...
Click to collapse
Do you flash the rom before the twrp zip?
I found a workaround instead of using the zip package.
1. Get the current partition you are using:
Code:
fastboot getvar current-slot
2. Choose which partition you want to install to( in this case I'm using B, but you can use A if you like ) and flash the latest TWRP IMG file:
Code:
fastboot flash boot_b twrp-3.2.3-0-jasmine_sprout.img
3. Set the current partition to the one you just flashed:
Code:
fastboot set_active b
Yes but then to go to TWRP to do something I can't always use a PC and from fastboot change slots. I took so long to install Magisk.
I had to dump the boot partition, modify it with magisk manager and flash it with the TWRP, it doesn't seem like anything to dump but to me it was difficult because I don't have root at the beginning.
If I flash the TWRP in the boot partition in the resurrection remix slot, I lose the chance to start the custon rom
Fixed, after the 3000th time I flashed, then the TWRP starts up, I don't know how not to ask me why but now I try to hypothesize 2 solutions:
1) We have to stay for a while with the custom rom, then later when you will try to flash the zip, the TWRP will start.
2) You need to have both Magisk and TWRP installed in the boot in order to start the TWRP flashed from zip without problems.
These solutions do not know if they are like this or I am confusing myself, so it happened to me.
If in doubt, hoping for an update does not hurt, maybe the TWRP will start immediately with no problems in the future.
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Akash731 said:
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Click to expand...
Click to collapse
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Akash731 said:
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Click to expand...
Click to collapse
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
pradeeppk said:
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
Click to expand...
Click to collapse
I don't want to try custom rom's as this is my main device guess I'm stuck with the encryption then thanks for your help. :good:
Edit:-
Tried TWRP r20 it decrypts fine thanks
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
gewe said:
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
Click to expand...
Click to collapse
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
I am using stock ROM, and yes, also Magisk (installed later). IIRC Magisk is not needed for TWRP to work. When I receive the next OTA notification, I will test this.
The thread you are referring to is for a OnePlus 3T. For our device this is the thread: https://forum.xda-developers.com/moto-g5s-plus/development/recovery-twrp-3-1-1-r7-t3694910.
Since there is no official TWRP for the Moto G5S Plus, I took the following text from the TWRP page for the Moto G5S.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Instead of that you can also use fastboot reboot-bootloader, and then from the bootloader start recovery.
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
gewe said:
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
Click to expand...
Click to collapse
As like you said this is the first time in my life i need to flash magisk to stick twrp.
I usualy doesn't use root or custom roms, install twrp, remove unnecessary apps from stock system, replace host files with adaway hosts, replace or edit gps config files. and continue using stock.
This is the main routine from Android 1.5
(Samsung spica (i think it was the first Android phone from Samsung)).
It may be due to security reason stock kernel or system delete twrp.
When installing magisk it patch stock boot image, that may be the reason of twrp remains after flashing magisk.
Hello friends,
I am not new with locking/unlocking, flashing roms....
I used to install different roms and had different problems but never met something like this.
so the problem is:
I unlocked my phone, installed twrp and tried to flash different roms (OOS, Lineage, Pixel experience) but it is still rebooting to fastboot and Im not able to go back to twrp recovery unless I flash bacl stock rom via miflash and flash twrp again.
I tried different twrps as well, wiped data, factory reset, advanced wipe.. still not able to flash any rom.
any advise?
Thanks in advance :good:
benzoxerxi said:
Hello friends,
I am not new with locking/unlocking, flashing roms....
I used to install different roms and had different problems but never met something like this.
so the problem is:
I unlocked my phone, installed twrp and tried to flash different roms (OOS, Lineage, Pixel experience) but it is still rebooting to fastboot and Im not able to go back to twrp recovery unless I flash bacl stock rom via miflash and flash twrp again.
I tried different twrps as well, wiped data, factory reset, advanced wipe.. still not able to flash any rom.
any advise?
Thanks in advance :good:
Click to expand...
Click to collapse
When flashing over stock MIUI you need to format data in TWRP. (Format, not wipe, need to type 'yes' to confirm.
Also, when restoring MIUI, make sure you boot into MIUI once before you flash anything else.
Use the latest 3.3.1-32 TWRP from here
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
Restore MIUI and boot into it.
Flash TWRP and boot into TWRP
Do a factory reset.
Format data.
Reboot into TWRP - this ensures the formatted data partition is mounted properly.
Flash the ROM, plus any extras.
Boot into system.
Everything should be good.
Maybe its problem with vbmeta, try to flash vbmeta first, but you need to boot to twrp trough adb command, then flash vbmeta, than flash twrp, reboot to twrp and flash vendor, rom if you want to ide custom rom, not Stock
vlubosh said:
Maybe its problem with vbmeta, try to flash vbmeta first, but you need to boot to twrp trough adb command, then flash vbmeta, than flash twrp, reboot to twrp and flash vendor, rom if you want to ide custom rom, not Stock
Click to expand...
Click to collapse
There shouldn't be any need to flash vbmeta.
In theory vbmeta would only be needed if you want to stick with MIUI, but without root, but want to install TWRP, maybe to debloat.
Flashing Magisk or flashing a custom ROM should remove the need to flash vbmeta.
If you're already on the latest MIUI there is no need to flash any vendor files, as they're already installed.
I dont know why, but Yesterday ive tried to flash custom rom, wiped everything and after flash and reboot the phone stucked in fastboot, wont boot to twrp,not with butt shortcut,not with adb command. So i try to flash vbmeta,than IT boots to twrp,and Also i was able to flash again twrp, this could be Also solution.