I have a P1000T currently running the Overcome Kratos Edition (3.3.1 IIRC).
It won't do a factory reset. It goes into recovery mode fine, but I get errors like "E:unknown volume for path [/cache/recovery/log]".
It appears the partitions might be screwy or something?
The tablet still boots fine, but it won't reset, so makes it impossible for me to sell it as I can't remove my data etc.
Any ideas what might be wrong? I've tried installing 001003-Overcome_7_Series_v4.0.0_NoWipe.zip from SDcard, but it can't find the SDcard mount.
When I connect it to my PC, I get access to both the internal and external memory fine.
Any ideas?
Sorted. Install ROM Manager and mounted the internal and external SD, and the reset worked fine. Not sure if mounting fixed it, or whether I simply need ROM Manager installed?
I got nook hd+ and used cm version 10.2 something for a while.
The device keeps crashing and restarting like crazy.
1 out of 10 times, it launches, but before I do anything, it crashes. Hell.
It has been crashing and restarting quite often these days, but since last night, all it does is crashing and restarting.
To make matters worse, I tried to format the device and install cm again. It did not work.
I made booting SD card and chose 'wipe data/ factory reset'. And nook said it wiped /data /cache data wipe complete etc. However, files were still there in internal storage.
On top of that, I had to try 4 times to install newest cm-11. It aborted.
Next, I tried to installnookjdplus factory2.2.0 . It had error. (status 6) to ne specific.
So, I tried newest cwm recovery. It installed, but nook still crashed.
I persevered and tried to install cm 11. It installed, but still crash and restart.
Hell. I literally spent whole day doing this. I am confused and frustrated and angry and experiencing a few other negative emotions English language dows not have in words.
Please, some advice.
Venrun said:
I got nook hd+ and used cm version 10.2 something for a while.
The device keeps crashing and restarting like crazy.
1 out of 10 times, it launches, but before I do anything, it crashes. Hell.
It has been crashing and restarting quite often these days, but since last night, all it does is crashing and restarting.
To make matters worse, I tried to format the device and install cm again. It did not work.
I made booting SD card and chose 'wipe data/ factory reset'. And nook said it wiped /data /cache data wipe complete etc. However, files were still there in internal storage.
On top of that, I had to try 4 times to install newest cm-11. It aborted.
Next, I tried to installnookjdplus factory2.2.0 . It had error. (status 6) to ne specific.
So, I tried newest cwm recovery. It installed, but nook still crashed.
I persevered and tried to install cm 11. It installed, but still crash and restart.
Hell. I literally spent whole day doing this. I am confused and frustrated and angry and experiencing a few other negative emotions English language dows not have in words.
Please, some advice.
Click to expand...
Click to collapse
CM10.x, CM11, and stock ROM need different versions of CWM recovery.
See http://forum.xda-developers.com/showthread.php?t=2679899 for info/pointers on flashing CM11.
To go back to stock ROM, see http://forum.xda-developers.com/showthread.php?t=2062613(item #6).
When switching between CM10, CM11, and stock ROM, you need to do "wipe /data & factory reset".
If none of the above helps the your problem might be due to an unruly app or hardware related.
digixmax said:
CM10.x, CM11, and stock ROM need different versions of CWM recovery.
See http://forum.xda-developers.com/showthread.php?t=2679899 for info/pointers on flashing CM11.
To go back to stock ROM, see http://forum.xda-developers.com/showthread.php?t=2062613(item #6).
When switching between CM10, CM11, and stock ROM, you need to do "wipe /data & factory reset".
If none of the above helps the your problem might be due to an unruly app or hardware related.
Click to expand...
Click to collapse
Ok. At least I got my biggest problem now.
I think my roblem is wipe data/factory reset does not do job it is supposed to do.
I still see folders and files in internal memory after factory reset. I think that is why install aborts and crashes even after successful install.
I think my problem is that wipe data/factory reset does not do its job
It gives me message it is formatting data cache and stuff. And last day they gave me data wipe complete. But the problem is, in internal memory, I can still see old folders and old files.
I think he should be gone if it is formatted. Where do I get the meaning of factory reset wrong?
Its not what is wrong with me. And how can I make factory reset work
And second question is that I tried to install B&N original operating system from cwm-based recovery. I tried a few different versions of
nookHDplus-factory-2.1.1-plain-stock.zip
However it always fail to install. Install aborted for some reason.
Thanks. It seem helpful.
digixmax said:
CM10.x, CM11, and stock ROM need different versions of CWM recovery.
See http://forum.xda-developers.com/showthread.php?t=2679899 for info/pointers on flashing CM11.
To go back to stock ROM, see http://forum.xda-developers.com/showthread.php?t=2062613(item #6).
When switching between CM10, CM11, and stock ROM, you need to do "wipe /data & factory reset".
If none of the above helps the your problem might be due to an unruly app or hardware related.
Click to expand...
Click to collapse
Thanks a lot for your advice
Going back to stock Rom 6 explains error message and aborting of install.
However the problem is where do I get CWM V 60036 or eariler?
Googling does not work.9
Venrun said:
Thanks a lot for your advice
Going back to stock Rom 6 explains error message and aborting of install.
However the problem is where do I get CWM V 60036 or eariler?
Googling does not work.9
Click to expand...
Click to collapse
You can get v6036 on that same thread digimax referenced above (my CWM thread linked in my signature). And a data wipe does not wipe your media files. To do that, go to mounts and storage and select wipe "data and datamedia".
Sent from my SM-T707V using XDA Premium HD app
thanks
leapinlar said:
You can get v6036 on that same thread digimax referenced above (my CWM thread linked in my signature). And a data wipe does not wipe your media files. To do that, go to mounts and storage and select wipe "data and datamedia".
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
trying it. hope it works.
did not work
for about deleting internal data, I went to 'mounts and storage'. used 'format /sdcard' and 'format/ data and/ data/media (/sdcard), but still has stuff in internal memory.
and to my surprise , I have been using CWM-6028. so far. I thought its name was 'NookHDplus-bootable'.
hell. stupid me.
Anyhow, CWM-6028 has been giving me troule
so, I would try other versions.
So far, I have done
1. made boot sd by burning image.
2. copy 'NookHDplus-factory-2.1.0-plain-stock' files and other versions.
3. Insert SD in device and boot CWM.
4. choose zip from sdcard.
5. install factory plain stock.
then I get message 'Failed to retouch 'system/lib/libemoji.so' (WTF is libemoji? and it is always this same file.)
E: error in sdard/nookHDplus-factort-2.2.1-plain-stock.zip(status7)
Installation aborted.
hell. And I tried every factory zip.
Am I doing something wrong?
Failed tp retouch '/system/lib/libemoji' is error message I get
Everytime I tried to install factory stock.
I tried every version of stock files. And I tried all CWM. And even tried TWRP, but it is always the same message what the hell is that emoji?
And what can I do with it?
What frustrates me the most is the fact that it installed 99% in a minute without trouble and stays there 410 minutes until it fails to install. It's driving me crazy
Does CM makes Factory reset by power button and home button does not work either.
Because I am getting message factory reset failed.
If CM is not the reason for it, well, something is wrong. Very wrong.
I am suspecting Internal memory corrupted lr something.
I should seriously consider throwing it away now.
Venrun said:
Because I am getting message factory reset failed.
If CM is not the reason for it, well, something is wrong. Very wrong.
I am suspecting Internal memory corrupted lr something.
I should seriously consider throwing it away now.
Click to expand...
Click to collapse
It is possible you have a bricked emmc. When bricked it looks like it is writing but is really read only and nothing takes. If you still have media files after a successful format data and datamedia then it is bricked. Probably best to get rid of it. You can buy a refurbished unit very cheaply these days.
Sent from my SM-T707V using XDA Premium HD app
Venrun said:
Because I am getting message factory reset failed.
If CM is not the reason for it, well, something is wrong. Very wrong.
I am suspecting Internal memory corrupted lr something.
I should seriously consider throwing it away now.
Click to expand...
Click to collapse
Assuming that your EMMC is shot, you can try running off SD card this no-emmc version of CM11 ROM: https://iamafanof.wordpress.com/201...-4-4-4-for-bricked-no-emmc-nook-hd-04nov2014/. It's best to use a card with fast randomized block read/write (which is what Class 4 cards are typically best at).
Thanks guys. By the way, what is emmc?
Is it part of CM software?
Does not sounds like hardware.
If I had factory resetted a day earlier, I would not have had problems.
Well. That is the way it is.
I finally kind of got nook working. I am running it on SD card now.
I got to thank you guys for your good advices.
Problem is that this ecmm free booting shrinks storage space.
No matter what is size of SD card, Internal storage is 900mb and SD card got 100mb. (I mean virtual Internal storage the file made in SD card) Not enough space to hold a movie.
I am happier to have tab working, but also wish to use full space of my SD.
At least I wish I can have a few Gs of storage.
Venrun said:
I got to thank you guys for your good advices.
Problem is that this ecmm free booting shrinks storage space.
No matter what is size of SD card, Internal storage is 900mb and SD card got 100mb. (I mean virtual Internal storage the file made in SD card) Not enough space to hold a movie.
I am happier to have tab working, but also wish to use full space of my SD.
At least I wish I can have a few Gs of storage.
Click to expand...
Click to collapse
Right after burning the ROM image to SDcard, it should be possible to use a disk partitioning tool such as MiniTool Partition Wizard to examine the SDcard ROM image's partitions and resize the /data partition to fill up the un-allocated space.
digixmax said:
Right after burning the ROM image to SDcard, it should be possible to use a disk partitioning tool such as MiniTool Partition Wizard to examine the SDcard ROM image's partitions and resize the /data partition to fill up the un-allocated space.
Click to expand...
Click to collapse
Thanks a lot. That sounds I can do it.
how you did it
Venrun said:
I got to thank you guys for your good advices.
Problem is that this ecmm free booting shrinks storage space.
No matter what is size of SD card, Internal storage is 900mb and SD card got 100mb. (I mean virtual Internal storage the file made in SD card) Not enough space to hold a movie.
I am happier to have tab working, but also wish to use full space of my SD.
At least I wish I can have a few Gs of storage.
Click to expand...
Click to collapse
Please tell how you made SD card work.
thanks.
rkgarg2000 said:
Please tell how you made SD card work.
thanks.
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showpost.php?p=49007593&postcount=84 for some pointers on how to create a CM SD card with customized partition sizing for HD+. Although it was written for CM11, you should be able to adapt it for CM10.2 by using the appropriate ROM and GApps zip files corresponding to CM10.2.
Please confirm if my problem has any other solution
my NOOK HD+ I have CMW 10.2.1 with 6.0.4.6 recovery. Nook went to loop while booting. Now I can go to recovery and able to boot SD recovery CMW 6.0.2.8. But issue is:-
1. For any update even for Stock ROM it gives status 7 error.
2. With system recovery 6.0.4.6 when I try factory reset the TAB reboot same happen when i try to format DATA. While factory reset and DATA format happens with 6.0.2.8 position remains same.
3. When I try to make backup on internal storage both with 6.0.4.6 (TAB recovery) or 6.0.2.8 (From SD card) it makes boot,recovery and system image but give error as failed to backup /DATA.
4. I have done every thing right from various and latest ROM's ( error Status 7), Formatting boot,system but 6.0.4.6 on NOOK is intact and is in loop.
Please tell How I can over come this STATUS 7 error or DATA backup error.
thanks.
digixmax said:
See http://forum.xda-developers.com/showpost.php?p=49007593&postcount=84 for some pointers on how to create a CM SD card with customized partition sizing for HD+. Although it was written for CM11, you should be able to adapt it for CM10.2 by using the appropriate ROM and GApps zip files corresponding to CM10.2.
Click to expand...
Click to collapse
rkgarg2000 said:
my NOOK HD+ I have CMW 10.2.1 with 6.0.4.6 recovery. Nook went to loop while booting.
Click to expand...
Click to collapse
Does it boot-loop to recovery?
If so, see http://forum.xda-developers.com/showpost.php?p=55582281&postcount=1459 for potential causes and solutions.
Now I can go to recovery and able to boot SD recovery CMW 6.0.2.8. But issue is:-
1. For any update even for Stock ROM it gives status 7 error.
2. With system recovery 6.0.4.6 when I try factory reset the TAB reboot same happen when i try to format DATA. While factory reset and DATA format happens with 6.0.2.8 position remains same.
3. When I try to make backup on internal storage both with 6.0.4.6 (TAB recovery) or 6.0.2.8 (From SD card) it makes boot,recovery and system image but give error as failed to backup /DATA.
4. I have done every thing right from various and latest ROM's ( error Status 7), Formatting boot,system but 6.0.4.6 on NOOK is intact and is in loop.
Please tell How I can over come this STATUS 7 error or DATA backup error.
...
Click to expand...
Click to collapse
CWM v6.0.4.6 is not compatible with CM10.x, you need to flash back to the CWM version you previously used.
Hi,
from MIUI 8.2.0 global stable I have sucessfully installed CM 13.
Before the installation progress and after flashed TWRP3020 on the first window from TWRP, I have choosed to maintain a specific place "read only". I was insure, so I decided to do so.
Then I wiped the system with TWRP. I choose Dalvik, System, Data and Cache. Just in internal storage I didnt mark to wipe.
I have installed CM13 and Gapps. Everything goes fine. But the Theme-Designer (where to choose themes) allways fail to start. In another Mi5 pro (2 pieces here) I have made all the same like in this one, and the Theme-Designer starts normal.
So I find, that in my storage, there are many old files from MIUI. They are not deleted and I understand why. Because I didnt mark in TWRP to wipe the internal storage.
So I gone to the settings in CM to reset to factory settings and made it. After starting the phone I saw, that all the folders are still there.
Now I am affraid, that something in the storage makes the Theme-Designer crash. I dont have another explication.
And after the installation I made today a update OTA to the newest version of CM (08.09.16) and the problem continues.
Is there a possibility to make a real clean install, wiping all the storage without to buy a USB-Stick to put there the install files for CM13 and Gapps? Or not?
Or ist there another way, to wipe the data storage? If I would make this with TWRP, I think that CM wouldnt start, because the folder "Download" would also be deleted. Or is there another folder, that is protected, to put the files there?
And I also had problems with bluetooth with MIUI with my Volvo. And with CM13 the problem continues. Maybe it has to do with some old files from MIUI, that are still in the system.
Can someone help?
No idea? Or a good link?
After I have installed CM 13 and Gapps, what happens if I go in TWRP and choose to wipe internal storage? Do I have after that a clean install without traces of the old OS or is all gone and I cant boot?
You can go back to TWRP and wipe internal storage, you'll still be able to boot into the ROM.
Sent from my EVA-L09 using Tapatalk
try in trwp ,wipe internal storage,wipe data
I flashed the lineageOS 17 roms that is available and it worked but then i realized that gapps was not complete so i went into TWRP to restore my old Backup of ColorOS 6.1 (A.08 version), also it had magisk installed, but it then would show the first boot logo then restart and go into the recovery. I then tried formating everything except internal storage and also factory wipe and now my backup is gone and everything else on my phone. I can still boot into recovery and such but now it wont even ask me for the decryption password. File manager in TWRP shows 3 folders in the internal storage (in sdcard 0, obb and TWRP).
Any help? i dont wont to break things even more.
Edit: I just noticed that in the 0 folder in sdcard there is 65 gb of folders and files. Im assuming that are my old files but they are encrypted. Any way to undo that?
I guess you have to install a rom and set everything up from scratch. You lost all your files when you formated data, including backups, etc.
If you want to update or change your recovery, now it's the time - since there's no rom or files to lost.
johnnyjoe said:
I guess you have to install a rom and set everything up from scratch. You lost all your files when you formated data, including backups, etc.
If you want to update or change your recovery, now it's the time - since there's no rom or files to lost.
Click to expand...
Click to collapse
I didnt format the internal storage only data and i edited the post saying that i think i found all the data but still encrypted. Im guessing TWRP wont automatically decrypt it.
For anyone with a similar problem. I reinstalled LineageOS and it decrypted all the files.