I have Samsung Mobile A305F I tried to root on .tar rooting file with Odin method using my PC But after i rooted my mobile it worked well for a day and when i restart it then suddenly gets stuck on logo screen With "the phone is not running samsung official software" message and it doesn't go forward or backward. I applied the same method of rooting as explained below after the device got stuck but it didn't worked and now i can't even go to downloading mode or factory data reset screen When I use power button key+ vol down or vol up keys it keeps restarting to the same logo screen again and again .
Methods that a use for rooting
1. I turned on bootlooder and performed the erasing process .
2. Then I restart and set up my mobile
3. After my device reset I went to developer option and turned on USE Debugging
4. I start the device in downloading mode and connected it with PC
5. Using Odin and 29 MB .tar file the process was pass
6. I restart my device and performed factory data reset and set-up my device back
7. I installed magisk and then root checker apk showed the device rooted message just following the method of YouTube guy and did nothing else
Any help for me please !
Wajid Arya said:
I have Samsung Mobile A305F I tried to root on .tar rooting file with Odin method using my PC But after i rooted my mobile it worked well for a day and when i restart it then suddenly gets stuck on logo screen With "the phone is not running samsung official software" message and it doesn't go forward or backward. I applied the same method of rooting as explained below after the device got stuck but it didn't worked and now i can't even go to downloading mode or factory data reset screen When I use power button key+ vol down or vol up keys it keeps restarting to the same logo screen again and again .
Methods that a use for rooting
1. I turned on bootlooder and performed the erasing process .
2. Then I restart and set up my mobile
3. After my device reset I went to developer option and turned on USE Debugging
4. I start the device in downloading mode and connected it with PC
5. Using Odin and 29 MB .tar file the process was pass
6. I restart my device and performed factory data reset and set-up my device back
7. I installed magisk and then root checker apk showed the device rooted message just following the method of YouTube guy and did nothing else
Any help for me please !
Click to expand...
Click to collapse
Woah seems like your in a real pickle without download mode you can't revert to stock to try and do this process again... Or maybe install a custom rom or GSI and then possibly root find the best pattern that works for you and and make sure you always making backups in twrp of your progress...
([emoji88]Cr Droid[emoji88])
Related
Hello everyone,
I seem to have a problem upgrading my GT-N7000 to JB, the phone downloaded a 494MB update, and restarted to FOTA mode.
The progress bar went from 0-100% in about 15-20mins, but the phone has since then not completed the FOTA.
If I restart the phone by long-pressing power key, the FOTA restarts, but again gets stuck at the 100% mark. Pressing Vol Keys and powering on makes no difference.
Further the phone isn't recognised in Windows - says 'Device Malfunction'. The cable is fine, as it works with another phone.
My bad luck it was, the phone data isn't backed up - I never expected anything to go wrong. Is there a remote possibility of data recovery before I wipe the phone?
Now, how do I get back access to my phone, and how do I complete the upgrade, or reset the phone? I would be grateful if you help me or guide me how to proceed. Taking it to the service point would be the last resort, I want to try out everything I can before I send this in - it's out of warranty.
Regards
Abhishek
AbhishekKr said:
Hello everyone,
I seem to have a problem upgrading my GT-N7000 to JB, the phone downloaded a 494MB update, and restarted to FOTA mode.
The progress bar went from 0-100% in about 15-20mins, but the phone has since then not completed the FOTA.
If I restart the phone by long-pressing power key, the FOTA restarts, but again gets stuck at the 100% mark. Pressing Vol Keys and powering on makes no difference.
Further the phone isn't recognised in Windows - says 'Device Malfunction'. The cable is fine, as it works with another phone.
My bad luck it was, the phone data isn't backed up - I never expected anything to go wrong. Is there a remote possibility of data recovery before I wipe the phone?
Now, how do I get back access to my phone, and how do I complete the upgrade, or reset the phone? I would be grateful if you help me or guide me how to proceed. Taking it to the service point would be the last resort, I want to try out everything I can before I send this in - it's out of warranty.
Regards
Abhishek
Click to expand...
Click to collapse
Dont worry. In general your personnel data are stored in internal SD and external SD, not disturbed by a system install process.
In that situation you'd better to install a new JB4.1.2 ROM using Odin in download mode.
Firstly see what ROM to be flashed. Official stock ROM, custom ROM, download it.
Read how to use Odin in download mode by connection USB PC-phone.
Odin is utility under PC. Download mode on the phone is entered after hold in the same time volume-down, home and power.
Hey guys
Samsung Galaxy Mini 5570 is a pretty old device now and definitely not worth to talk about, but It's for my aunt and she said i HAVE to fix it otherwise she will kick my butt.
This is the whole story:
Phone was running a very low android version (it was 2.1 or something) that i could barely install apps on it (Just installed WhatsApp), I decided to upgrade it to a higher version so i could install other applications like Line and Telegram for her, so basically i had to flash CWM file first because it was required, I flashed it using this link:
http://www.droidthunder.com/root-install-clockworkmod-cwm-recovery-samsung-galaxy-minipop-gt-s5570/
They said flash the cwm file and factory reset your phone but i flashed the cwm file and rebooted my phone without factory reset, everything was working fine :good: but i decided to follow the instruction so i rebooted into the recovery mode and factory reseted my phone (by my phone i mean her phone, but i'm gonna say my phone instead) and guess what, it never booted up again. stuck on Samsung logo.
But i could go into the download and recovery mode, so basically i followed this instruction:
http://www.droidthunder.com/update-samsung-galaxy-minipop-gt-s5570-android-4-2-1-cyanogenmod-10-1/
which is from the same guy, I flashed it using recovery mode and flashed gapps too, everything went normal without any errors. So i rebooted my phone and ............
a black screen poped up, I was really worried because i couldn't boot my phone, nor could i go into the recovery or download mode. I don't know if i could or not but the only thing I'm getting right now is a black screen or a backlight.
The only thing that seems to be working is when i hold Power+Volume UP button, my laptop can detect my phone (as Samsung CDMA Technologies) but can not flash anything using Odin, it stucks on "setup connection" message. Nothing else is working, I tried:
Home+power+volume down
Home+power+volume down+volume up
Power+volume down
Power+home
etc
I also tried a hundred different ways like completely uninstalling the drivers (with or without kies) pulling battery out, try those key combination while battery is out and reinsert battery while holding them but nothing is working.
I found this article yesterday which is for unbricking the hard bricked phones, but ADB can not detect my phone:
http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
Please help me guys, And do not suggest me to take it in Customer Service because i would if i could.
Thanks in advance
This is my first post and I'm in need of some help that I can't seem to find anywhere when searching the internet. I'm not a developer nor am I close lol I just have tons of fun learning the development process - it's seriously one of my favorite things to do. Anyways I've messed up royally with my Galaxy Note 5 N910P and I'm stumped on what I should do next! So here's the issue: My Note 5 will not stop boot looping!!! I've flashed stock, almost every version that I'm able to and nothing has worked. The last thing I remember doing before it started this b.s is rooting with CF Auto root. I've always used twrp then flashed Supersu and the dm verity and never had issue! But after flashing the CF Auto root I kept getting kernel is not seandroid enforcing and then the dreadful boot loop issue that has been going on for three days now! Is there something i'm missing? or not doing right? Please message me and let me know, and if this is the wrong place to post about this, I dont mind if my post is taken down just at least help with my question some how! Thank you, XDA is my favorite place - you guys are awesome, I don't trust any other source!!!
saywhhaa33 said:
This is my first post and I'm in need of some help that I can't seem to find anywhere when searching the internet. I'm not a developer nor am I close lol I just have tons of fun learning the development process - it's seriously one of my favorite things to do. Anyways I've messed up royally with my Galaxy Note 5 N910P and I'm stumped on what I should do next! So here's the issue: My Note 5 will not stop boot looping!!! I've flashed stock, almost every version that I'm able to and nothing has worked. The last thing I remember doing before it started this b.s is rooting with CF Auto root. I've always used twrp then flashed Supersu and the dm verity and never had issue! But after flashing the CF Auto root I kept getting kernel is not seandroid enforcing and then the dreadful boot loop issue that has been going on for three days now! Is there something i'm missing? or not doing right? Please message me and let me know, and if this is the wrong place to post about this, I dont mind if my post is taken down just at least help with my question some how! Thank you, XDA is my favorite place - you guys are awesome, I don't trust any other source!!!
Click to expand...
Click to collapse
First of all you have entered wrong model no here note 5 model no should be SM-N920xx
1)Have you enabled Oem unlocking from developers option before flashing twrp and cf-autoroot using odin? If not then you done a mistake!!
2) Have you tried to flash latest stock firmware using odin with latest usb drivers installed on you pc and proper odin flashing guide?(Flash latest 6.0.1 for your device with latest usb drivers installed on pc and connect phone to main usb port using original usb cable) After flashing stock rom if your facing bootloop then you can try reset through stock recovery (Press volume down+power button to switch off your phone..When screen shuts off immediately press volume up+power+home key simultaneously untill you see Samsung galaxy note 5 logo, release keys..You are now in stock recovery from there choose wipe data/factory reset..After reset complete reboot your device)
3)If you can boot into twrp recovery normally then flash any custom rom suitable for your device i.e. for sm-n920p..Custom roms are pre-rooted so no need to flash cf-autoroot..Flash custom rom, if you successfully boot up the rom( It's difficult to boot custom rom though if you haven't enabled oem unlocking you will face custom binary is blocked by frp protection),then enable oem unlocking from developers option and try flashing stock rom again
4) Next option for you is download Samsung smart switch for pc, install latest usb drivers on your pc, connect your phone to pc in download mode(Press volume down+power+home button simultaneously),in smartswitch select emergency software recovery, it will ask you imei,model no and serial no which you can find either on box or back panel of your phone,smartswitch will detect latest stock firmware for your device, hit update now,give some time until update complete..Your device will be automatically reboot..If even you face bootlopp, then goto stock recovery(Press volume down+power button to switch off your phone..When screen shuts off immediately press volume up+power+home key simultaneously untill you see Samsung galaxy note 5 logo, release keys..You are now in stock recovery from there choose wipe data/factory reset..After reset complete reboot your device)
**IF SUGGESTION IN SECOND POST HELPS YOU THEN ITS DONE, AVOID NEXT SUGGESTIONS**
Are you sure you can't install cf auto root again to solve it? IF not...
I did a search and got hits for twrp for N910P. Get it loaded, get it wiped and have another shot at success. Next way to get rid of the persistent rooter gone rogue, load up a factory BL + AP. If that doesn't work download another version and try again.
I've enabled OEM unlocking, flashed latest stock AP...BL.. And so on, factory reset in both factory and TWRP. I have also tried flashing CF Auto root again to see if that would fix it also custom ROMs bootloop except for CM13 and Lineage OS- Which is weird because the ROMs are for the SM N920C model and I'm and Sprint model, So I don't understand that. Weird!! Everything recognizes me as SM N920C except when I am in download mode. Also, having no imei or any back ups make its even harder since my computer completely crashed on me because I am unable to use Samsung smart switch due to the wrong model and null imei. So I'm completely stumped with this issue. Not sure if its a corrupted partition or folders not being in the correct folder locations along with wrong permissions, I've literally stressed everything to my knowledge about this and I'm all out of what issues this could be related to
After months of deliberation I finally decided to root my Note 9. It was the first time I've ever tried rooting and it seems to have gone horribly wrong. To root the phone, I followed the guide in the video titled 'How to Root Galaxy Note 9! [EASIEST METHOD]' on youtube which has an instruction link in the description. As a new user here, the forum doesn't allow me to post links yet, so please just type the title on youtube and it'll come up as the first result.
What I did was:
- unlocking bootloader
- Flash AP file with TWRP version 3.4.0
- Wipe data
- Since I was worried about using a software from an unknown source, I then flashed the official magisk v20.4 instead of the 'N9-S9_root_for_oem_issue_devices_v3' file recommended in the video.
After doing so, the note 9 restarted and showed the error message "Verification Failed, Unable to restart your device. The Integrity verification has failed. You need to reset your device to factory default settings. This will erase all your data.". I allowed the phone to reset.
Following this, the phone restarted and showed exactly the same message of 'verification failed' and no amount of going through the rebooting process resolved the issue. I googled the issue and was advised to flash the phone with Odin by going into download mode. I then tried to go into download mode, but the phone will simply not go into it and tries to restart the normal way. I also tried to connect to my laptop to see if I can flash with odin but the phone was not recognised at all by the computer.
I then tried to reboot using the twrp key combo and this worked. I then decided to try flashing with the 'N9-S9_root_for_oem_issue_devices_v3' file in the tutorial. Yet, this led to the same issue as with the official magisk file.
Looking at some rooting tutorials, I see that some of them recommend flashing CSC, AP, BL and CP instead of just the AP in the tutorial I followed. I then thought that perhaps the issue is I need to install a ROM on the device. I therefore tried to load the lineage 17.1 ROM in the micro SD card and installed it (top left option on twrp 'install') as well as the magisk and disable_dm_verify_forceencrypt zip files.
In hindsight, this was a stupid move from me - I did so I was in full panic mode at that point and desperate for a solution.
After doing so, the phone rebooted and showed a booting animation of a single blue curved line stuck with a circle rolling from right to left on it.
I left it for a while, hoping that it meant the new ROM was booting. 30 min later it was still stuck on the animation!
I then tried to reboot the phone. Pressing power button did nothing. I then tried different combinations and eventually power + volume up + bixby allowed it to restart in TWRP mode.
As of now, the phone is still in TWRP mode. The phone is still not recognised by my laptop and will not enter download mode if I press volume down + bixby when restarting.
I am fully aware that I've screwed up the rooting process and feel awful about it. It was the first time I've ever tried rooting and I really hope it is only a 'soft brick' and that my phone can be saved. I would really appreciate if anyone here could advise what I can do to complete the root process correctly from here?
Many thanks,
Sam
Is there a "download" or "bootloader" option when you press the reboot button in TWRP? My Note9 is on stock, so I'm not 100% certain myself. However if there is, that should take you to Samsung's download screen. This way you can send yourself back to stock if you give up on rooting your device.
BTW, I do recommend following a note9 rooting guide on XDA (it's not too hard to find) over a youtube video, since YouTube videos can often be out of date or a little sketchy.
Hi mate... need your help so badly,
my M21 is stuck at the bootloader unlocked screen. Can't do anything more than restarting the phone by pressing Vol down + power. Doesn't detect from PC. Can't get into download mode or anything else. this happened while I'm flashing the TWRP and trying to restart the phone into recovery mode. please help.....
Did you resolve this?
hey did you solved the issue ? and how please. I have managed to flash firmware using odin but still stuck at the bootloader warning. What should I do ?? anyone ?
indike114 said:
Hi mate... need your help so badly,
my M21 is stuck at the bootloader unlocked screen. Can't do anything more than restarting the phone by pressing Vol down + power. Doesn't detect from PC. Can't get into download mode or anything else. this happened while I'm flashing the TWRP and trying to restart the phone into recovery mode. please help.....
Click to expand...
Click to collapse
Hey I have the same issue. I have tried Odin to flash stock firmware also repartitioned the phone using Odin but did not solve the Issue . Please can anyone help us?
Also can you remember what you did before getting stuck cause I did nothing wrong . Opened the maps And gave the permission to use location after that calibrated the compass and phone hung on me from then it is on that warning screen
rajhridoy said:
Hey I have the same issue. I have tried Odin to flash stock firmware also repartitioned the phone using Odin but did not solve the Issue . Please can anyone help us?
Also can you remember what you did before getting stuck cause I did nothing wrong . Opened the maps And gave the permission to use location after that calibrated the compass and phone hung on me from then it is on that warning screen
Click to expand...
Click to collapse
Bro i have also same problem when I was flashing twrp through Odin .
My phone is stucking on twrp twrp is blinking again and again.also when I try to go to the download mode it automatically comes to bootloader and then to twrp please bro help if have fixed it
I was just speaking to a phone retailer and he told me how Shamshung M-series phones are getting locked by OEM manufaturer automatically within 6-7 months of usage (he was ready to show me evidence also so I believed him) , he said there is no solution to this So pls guys just an advice DO NOT CONNECT YOUR PHONE TO INTERNET FOR ANY OEM UPDATES,
1> TRY TO BUY PHONE FROM ONLINE STORE (BECAUSE RETAILER WILL FORCEFULLY UPDATE THE PHONE EVEN IF YOU TELL THEM NOT TO UPDATE)
2> FIRST, DONT PUT IN ANY SIM CARD IN SIM TRAY
3> SECOND, DISABLE WiFi (DONT SAVE ANY WiFi PASSWORDS) & TURN ON AIRPLANE MODE
4> THIRD, TURN ON DEVELOPER OPTIONS- USB DEBUGGING "ON" & DISABLE "KEEP MOBILE DATA ALWAYS ON" UNDER DEVLOPER OPTIONS
5> FOURTH, USE "DEBLOAT LIST" ATTACHED BELOW TO UNINSTALL INSTALLED APPS USING ADB
6> FIFTH, ONLY CONNECT TO WiFi FOR FEW SECONDS SO THAT THE OEM UNLOCK OPTION IN DEVELOPER OPTIONS GETS GREYED OUT.
7> SIXTH, FLASH ODIN-TWRP TAR FILE, WIPE/FORMAT DATA, BOOTLOGO PATCHER ZIP, MAGISK 24.3 ZIP, PRISH KERNEL (OR ANY KERNEL OF CHOICE), THEN FLASH TOTSUKA/PIXIE/CLEAN_OS/CrDroid10 (ONLY 3 STOCK-BASED ONEUI ANDRO 11 ROMS AVAILABLE, NO CUSTOM-BUILT NON-ONEUI ANDRO 11 ROMS AVAILABLE NOT EVEN M30S PORT ROM), VBMETA IMG
8> REBOOT TO TWRP, WIPE DATA
9> AFTER DEVICE BOOTS FIRST THING IS DISABLE WiFi & TURN ON AIRPLANE MODE, INSTALL NETGUARD FIREWALL APK THROUGH PACKAGE INStALLER (ALWAYS KEEP NETGUARD ON THROUGHOUT THE PHONE LIFETIME OTHERWISE SHAMSHUNG OTA MIGHT KILL THE DEVICE),
10> DEBLOAT BUILT-IN GAPPS USING ADB
11> INSTALL MICRO-G FROM TWRP
#NOTE: FOR FACTORY RESET SCENARIO REPEAT STEPS 10 & MAYBE 11 TOO.
AVOID VISITING OR USING OEM WEBSITES AND APPS. REMEMBER, FOR GUGLE EVERYONE IN THE WORLD IS A POTENTIAL TERRORIST.