Hello guys, i tried to flash my Samsung A305F with custom rom, i flow all instructions to, but i didnt done, i tried to flash the official rom for A305f with the compatible region(XME:Malaysia) but no result, ,
i tried to flash TWRP, but I can't access, it stok samsung logo , with this massage :: ""< KERNEL REV. CHECK FAIL DEVICE:6 BINARY:5(DTB) >"", and it reboot with same.
even when i turn off the phone, and want to access the TWRP, press Power+Vol up, it give me the same error Stok samsung logo , with this massage :: ""< KERNEL REV. CHECK FAIL DEVICE:6 BINARY:5(DTB) >""
i would like ask you if there is a solution, of if my phone is bricked ??
i can flash with odin tar custom kernel or official kernel for A305f ....... ????????
waiting for a favorable response:crying:
Help, I have a similar issue! Did you figure it out?
Did you try to flash with the latest version of odin and with the latest firmware available for your model?
Leropac said:
Hello guys, i tried to flash my Samsung A305F with custom rom, i flow all instructions to, but i didnt done, i tried to flash the official rom for A305f with the compatible region(XME:Malaysia) but no result, ,
i tried to flash TWRP, but I can't access, it stok samsung logo , with this massage :: ""< KERNEL REV. CHECK FAIL DEVICE:6 BINARY:5(DTB) >"", and it reboot with same.
even when i turn off the phone, and want to access the TWRP, press Power+Vol up, it give me the same error Stok samsung logo , with this massage :: ""< KERNEL REV. CHECK FAIL DEVICE:6 BINARY:5(DTB) >""
i would like ask you if there is a solution, of if my phone is bricked ??
i can flash with odin tar custom kernel or official kernel for A305f ....... ????????
waiting for a favorable response:crying:
Click to expand...
Click to collapse
The binary error 5 means it is not the correct rom for your device. This could be because the ROM got corrupted when flashing.
1. Press your power button and volume up until it goes into the recovery section.
2. Click on reboot and select Download.
3. Connect your phone to your laptop and flash the stock image.
4. Root your phone.
5. Install twrp.
6. Download the correct ROM or redownload and make sure it doesent get corrupt in the process.
7. Make a full backup of your device through twrp in case this happens again.
8. Flash the custom ROM.
9. If anything goes wrong, just restore the backup.
patrickneil said:
Help, I have a similar issue! Did you figure it out?
Click to expand...
Click to collapse
Please have a look at my previous comment on this post.
Related
My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?
Did you try to do a wipe?
vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!
how to do a wipe please tell
mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop
My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...
If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime
I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks
Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T
U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers
In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.
whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...
Progress?
Sent from my GT-S5830 using xda premium
Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"
hello,
I try'd to install cm7 but it failed.
i can go in download mode and in recover mode but in recover mode i got :
E: unknown volume for path [/data]
.......... ( and more errors )
what can i do?
i dont have clockworkmod...
i was on I9000XXJVO and if i can recover it by using odin give me a download link for an rom (A)
here
You could have found this if you used the search button.
Generally your error can be resolved by flashing a stock ROM with PIT and partition ticked.
Stock rom can be found at sammobile.com..
thanks i fixed it now and rooted my phone but can i install a custom rom of will i get the bootloop?
Custom rom use new version of recoveri. When you went in bootloop pull out battery, and put it back and then enter in recovery and flash custom rom
Sent from my GT-I9000 using Tapatalk 2
ericosman said:
thanks i fixed it now and rooted my phone but can i install a custom rom of will i get the bootloop?
Click to expand...
Click to collapse
well there are some custom rom that after applying it the phone is stuck on bootloop usually you just have to remove battery then install the update again..
btw just follow the instruction on to how to update to your chosen custom rom and make sure you followed the pre requisites as to avoid bricking your phone...
there are some custom rom that requires certain firmware before you could actually update to that custom rom. like if you need to be on xxjvz update your phone to xxjvz first then apply the custom rom.
try sammobile.com... for some stock firmware if ever you needed to update to it...
Unbrick
Thanks this was the only thing that surpised me on galaxy player
Hi guys
I really need you help...
I have a samsung Ace .. i had this rom: [ROM] [Stock] [Nims 11 Mem Hack / BE 1.6 Kernel] S'Perience ROM ®
with clockwork recovery and of course root
then i want to try the stock rom version 2.3.6 TPH (Portugal) .. I went to sammobile downloaded that rom and odin with ops... after all of the process the odin shows up the message "pass" with blue color but my phone was blinking.. and now it only does that, blinking.. i´m not able to enter on recovery mode or on the mobile itself... only able to get download mode..
Pleasee some help!
someone ?!
Try to install the CWM recovery for Odin: http://forum.xda-developers.com/showthread.php?t=1465599
And then a Custom ROM.
maniaczek1111 said:
Try to install the CWM recovery for Odin: http://forum.xda-developers.com/showthread.php?t=1465599
And then a Custom ROM.
Click to expand...
Click to collapse
I have already tried that without sucess .. After I install anything from odin it keeps blinking
AnonFreitas said:
I have already tried that without sucess .. After I install anything from odin it keeps blinking
Click to expand...
Click to collapse
pleaseeeee...
Reflash stock via odin. Your device mightn't boot for the first time. Then reconnect & reflash via odin right away. Your device will boot. If it doesn't, take off the battery & put it back, go to recovery mode & do a factory reset & reboot. It should work. But before doing all this, remember, close all the intervening programs like kies,etc & make sure you have the latest device drivers installed.
Sent from my GT-S5830 using xda premium
I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
l_m_husni said:
I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
Click to expand...
Click to collapse
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
narutosri said:
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
Click to expand...
Click to collapse
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
You can't enter recovery after flashing original fw via odin? Try taking out battery, put it back in and force recovery. Press it for a long time till it enter recovery. Then factory reset. I encountered this once on galaxy ace, endless bootloop and can't enter recovery but download is okay. Then I pressed the buttton until it somehow got into recovery. I don't know if this works but you can try though.
l_m_husni said:
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
Click to expand...
Click to collapse
We do not have any JB custom kernel that is flahsable with Odin. So I suppose you flashed GB custom kernel on JB, that is your problem. Flash whole STOCK JB FW again. After that use ONLY JB kernels. CoCore 6.x for example. Only one not abandoned from updates for now.
Do this again with JB, step by step: http://forum.xda-developers.com/showthread.php?t=2086965
And kernel: http://forum.xda-developers.com/showthread.php?t=2140597
Unzip it, put it on SD card, install Frapeti's universal kernel flasher. Install some ROOT explorer, this app needs it to work. Use it to install kernel.
Study content of this thread for future use: http://forum.xda-developers.com/showthread.php?t=2094318
I belive I soft bricked my i9305 when I tried to install Chainfire3D. I get stuck on the samsung logo but I can still access recovery. I did a CWM backup in Rom manager before it soft bricked but I cant access the backup from the default Recovery and I never flashed into CWM Recovery. So I wonder if I can flash CWM recovery from default recovery so I can reach my backup. Factory reset did not help, still stuck on Samsung logo. I tried flashing 2 roms but I get a error message E:Failed to verify whoe-file signature, E: signature verification failed. I can also add that I did not use Odin to root my device, I used Framaroot. I have no idea what my region number is and such so I'm not sure I can flash the stock rom ether.
Any kind of help is appreciated.
Fragda said:
I belive I soft bricked my i9305 when I tried to install Chainfire3D. I get stuck on the samsung logo but I can still access recovery. I did a CWM backup in Rom manager before it soft bricked but I cant access the backup from the default Recovery and I never flashed into CWM Recovery. So I wonder if I can flash CWM recovery from default recovery so I can reach my backup. Factory reset did not help, still stuck on Samsung logo. I tried flashing 2 roms but I get a error message E:Failed to verify whoe-file signature, E: signature verification failed. I can also add that I did not use Odin to root my device, I used Framaroot. I have no idea what my region number is and such so I'm not sure I can flash the stock rom ether.
Any kind of help is appreciated.
Click to expand...
Click to collapse
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Also wrong forum. This is the i9300 Q&A not i9305 Q&A
You can use the report button in the top right of your post /!\ to move it to the right location, which is here: http://forum.xda-developers.com/forumdisplay.php?f=1822
crisnar said:
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Click to expand...
Click to collapse
Ok but the problem is that I cannot enter download mode because I did not root with Odin. So I cannot connect my phone to odin yet. Any idea?
Fragda said:
Ok but the problem is that I cannot enter download mode because I did not root with Odin. So I cannot connect my phone to odin yet. Any idea?
Click to expand...
Click to collapse
A good idea would be for you to read the basic faqs and guides first .
ODIN and Root have nothing at all to do with entering download mode .
No download mode means you require a service centre repair .
jje
I can not enter adb shell ether because I never had the chance to enable usb debugging. Is service center really the only way? I can still install files from default recovery.
yes. sadly service center is the only option you have now
Sent from my GT-I9300 using XDA Premium 4 mobile app
crisnar said:
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Click to expand...
Click to collapse
You were totally right! Now CWM recovery works.
JJEgan said:
A good idea would be for you to read the basic faqs and guides first .
ODIN and Root have nothing at all to do with entering download mode .
No download mode means you require a service centre repair .
jje
Click to expand...
Click to collapse
I finaly made it work, now I can acess odin and Download mode.
However I still dont know due to the fact that none of my roms I try to install with CWM Recovery works (error 7) I got a GT-I9305N so I'm still stuck, thinking about flashing the stock rom I downloaded from sammobile through odin although I'm not sure how.
Thanks so far guys.
Flash stock and get the phone working .
jje
Fragda said:
You were totally right! Now CWM recovery works.
I finaly made it work, now I can acess odin and Download mode.
However I still dont know due to the fact that none of my roms I try to install with CWM Recovery works (error 7) I got a GT-I9305N so I'm still stuck, thinking about flashing the stock rom I downloaded from sammobile through odin although I'm not sure how.
Thanks so far guys.
Click to expand...
Click to collapse
Give me the link to the rom you want flash. The backup you have made not work?
I finaly got everything to work!
I flashed stock rom that I downloaded from sammobile through odin. I want to thank you guys so much for helping me out, it wasn't a easy road. Chainfire 3D ruined everything for me but I should have been more careful with installing that. Hopefully I can find something better to make the textures not all white in HD games but thats a different story.
Thanks again everyone!
I NEED HELP! Im a noob, i have a samsung S3 GT-i9305 ( GT-I9305GSMH) And i have soft bricked it by flashing a PDA that was meant for only i9300 - i then tried recovring it by doing alot of stuff but it wont work ... does anyone have any idea on how to fix this problem ? please .... btw i was using odin to root my phone but the cu*t fukced me over.... help anyone.. im stuck in downloading mode please do not remove target..