Database Develop

Tango from AT&T?

There is reports on the internet of Tango rolling out on AT&T - can anyone confirm this? I used the cab sender method so of course when I check for an update, it says my phone is on the latest version 7.10.8773. However, there is Samsung firmware bundled with the A&T firmware - does anyone know what it does? Does it fix the hanging wireless driver, does it break interop-unlock, does it fix the issue when powering on the screen sometimes?
If anyone could capture the update via wireshark and give me a link to download and install, that would be great I mean.. unless it breaks interop-unlock, in which case I don't give a **** about it.
Thanks,
6-4

the most recent update from ATT is still @ 7.10.7720

This is the Samsung update..
www.download.windowsupdate.com/msdo..._7c77306f9c299d47b491ac080855febbd68c0ccf.cab

did you try installing the firmware did the firmware relock ur phone?

Sorry - yes, I installed the firmware and there was no negative repercussions, worked flawlessly.
Sent from my SGH-i937 using XDA Windows Phone 7 App

you have to apply the prevent relock xap that jaxbox has on his windowsphonehacker website if you want to keep interop unlock if you apply the samsung update. Thats how im still interop unlocked, with tango and the samsung firmwae update which fixed the keyboard lag. i made a back up before i applied the samsung update just in case so i would do the same if i were you.

thanks, did the firmware update already. i have applied the prevent lock xap before doing the firmware update i kept a backup also just in case. works great and kept my interop unlocked.
One thing ive notice, before the fw update i can only play/pause/volume up, now everything are working including the next/previous track clicks controls.

Wow scratch that. My phone called home and now half my homebrew apps won't launch.. apparently reflashing is the only way to fix this? Great. Stock roms for the focus s aren't even available.. ****.
Sent from my SGH-i937 using XDA Windows Phone 7 App

actually my focus s was relock after the tango update and deleted some of my sideloaded apps after launching them. i did apply windowbreak again then deployed the prevent relock xap and finally applied the fw update. hopefully it will remain unlock.

BryG0427 said:
actually my focus s was relock after the tango update and deleted some of my sideloaded apps after launching them. i did apply windowbreak again then deployed the prevent relock xap and finally applied the fw update. hopefully it will remain unlock.
Click to expand...
Click to collapse
Lucky you - I neglected to read the info about preventing the relocking, I just figured it would happen as soon as I installed the cab. What to do, what to do..

My GF's Focus S on AT&T has been giving an update notice for a couple days. Finally plugged it into Zune and the update failed. I previously force updated to 8107 for VVM support. Hopefully someone will release the cab file to upload in the forced state, as I'm guessing many people didn the force update.

64GUNSHIP said:
This is the Samsung update..
www.download.windowsupdate.com/msdo..._7c77306f9c299d47b491ac080855febbd68c0ccf.cab
Click to expand...
Click to collapse
spokanedj said:
My GF's Focus S on AT&T has been giving an update notice for a couple days. Finally plugged it into Zune and the update failed. I previously force updated to 8107 for VVM support. Hopefully someone will release the cab file to upload in the forced state, as I'm guessing many people didn the force update.
Click to expand...
Click to collapse
See the link above. That's the Samsung LE2 firmware update pushed with Tango.

sweet! i used the zune/disconnect trick and got to 8773.
w/o it zune reported i was up to date with 7720
http://www.wpcentral.com/att-sitting-samsung-tango-updates-windows-phone-heres-how-get-now

BryG0427 said:
actually my focus s was relock after the tango update and deleted some of my sideloaded apps after launching them. i did apply windowbreak again then deployed the prevent relock xap and finally applied the fw update. hopefully it will remain unlock.
Click to expand...
Click to collapse
I have the same issue updating by zune. Then I revert to the previous firmware version to recover the interop unlock and then I deployed the prevent relock xap but then you said you applied the firmware update. How do you apply the new firmware update? ussing zune?

sorry, i think i missed something here, has anyone applied the LE2 samsung OEM update that is shipped out with Tango and noticed if you can no longer use diagnostic tool to apply updates?
my phones still not arrived yet but surely updates can be done as following, please correct me if im wrong, ive been kinda used to the HD2 for years...
unlock
backup (A) (keep copy)
cab OS update
unlock if needed
backup (B) (keep copy)
apply OEM (LE2) update
at this point you should have an unlocked device but are unable to re unlock it if needed, but do benifit from newer drivers etc.
To update to the next OS or enable unlocking you
restore the backup of that same OS version BUT without the OEM update (backup B)
apply the next CAB OS update,
unlock it,
backup again (B) (keep copy),
apply next CAB OEM update
essentially for every OS update you revert your OS to the backuped up version without the OEM update allowing you do mod it after you cab update the OS.
unless we can install our own certs and make our own OEM update minus all the crap we dont need....

Yippikaye said:
I have the same issue updating by zune. Then I revert to the previous firmware version to recover the interop unlock and then I deployed the prevent relock xap but then you said you applied the firmware update. How do you apply the new firmware update? ussing zune?
Click to expand...
Click to collapse
I have applied the fw update manually thru cab sender (did not used zune software).

Hi Guys,
I updated with the cab from 64GUNSHIP my samsung focus S but now is always rebooting.
I can't syncronize the mobile phone to restore the backup.
Can you help me?
Edit: Finally I can't restore with Zune pushing turn on button and camera button from the mobile phone, finally I restore with the Zune application.

Hey! I used cab sender for my Focus S, updated to Tango and now in Zune there's the Samsung update :victory: updated with no problems :good: solved many fixes like the keyboard, and sound

Has anyone been able to use internet sharing after applying the fw update through cab sender? I'm not on ATT and get the generic message to call 611 to enable it...
If I roll back to tango it's fine...Definitely still interop unlocked as all my sideloaded apps still work.

jess6217 said:
Has anyone been able to use internet sharing after applying the fw update through cab sender? I'm not on ATT and get the generic message to call 611 to enable it...
If I roll back to tango it's fine...Definitely still interop unlocked as all my sideloaded apps still work.
Click to expand...
Click to collapse
I lost my interop w/o backup after doing the updates, mine doesn't let me use internet sharing anymore either. However, using WinTT (http://forum.xda-developers.com/showthread.php?t=1587332) you can enable it with default settings on any interop/rooted handset.:laugh:

[Q] Online Update for SEA Region failed

Greetings.
Very recently, there was an official/OTA update for P7-L10. And I subsequently downloaded and tried to update it as soon as it finishes downloading.
But, when it tried to update, it keeps failing. Is the update wrong? or is there something missing that I am not clearly seeing it?
My current version, out of the box - P7-L10V100R001C00B133SP01
and the update (online update) is (as mentioned) : P7-L10_SouthPacific_C00B620.
Please advise me on what might have went wrong?
Thank you.

piring said:
Greetings.
Very recently, there was an official/OTA update for P7-L10. And I subsequently downloaded and tried to update it as soon as it finishes downloading.
But, when it tried to update, it keeps failing. Is the update wrong? or is there something missing that I am not clearly seeing it?
My current version, out of the box - P7-L10V100R001C00B133SP01
and the update (online update) is (as mentioned) : P7-L10_SouthPacific_C00B620.
Please advise me on what might have went wrong?
Thank you.
Click to expand...
Click to collapse
Do you have custom recovery?

ibeqa said:
Do you have custom recovery?
Click to expand...
Click to collapse
Hey there, thank you for the reply.
I'm not sure, how to check. But I have never rooted this phone yet.

piring said:
Hey there, thank you for the reply.
I'm not sure, how to check. But I have never rooted this phone yet.
Click to expand...
Click to collapse
Do you have TWRP or CWM installed? Was your phone brand new or pre-owned? Do you have custom rom or stock rom?

ibeqa said:
Do you have TWRP or CWM installed? Was your phone brand new or pre-owned? Do you have custom rom or stock rom?
Click to expand...
Click to collapse
Nope, I do not have those installed. This is a brand new phone running stock rom.

Ok, I guess your phone is not branded (vodafone, orange, etc.), so get the b609 update and install it.
If you had firmware 133, how come you got SAE update? Where did you buy your phone?

ibeqa said:
Ok, I guess your phone is not branded (vodafone, orange, etc.), so get the b609 update and install it.
If you had firmware 133, how come you got SAE update? Where did you buy your phone?
Click to expand...
Click to collapse
Yep, it's not. Hmm. I am unsure as to how or where I can get the B609 update, because ever since I first laid my hands on this phone, it has been running B133 out of the box. And, since, in between then and now, I have been going to the system update to look for any update prior to this one that I am currently having a problem to update, and there was no new update (until, again, now )
Also, previously I did went online on my PC to find an update B609, and downloaded it and tried to do a local update. and unfortunately for me, it caused my phone to be soft-bricked, and back then, I have not turned on my USB debugging or did any major changes to my phone, thus, requiring me to send my phone to the service centre. So, I'm kinda weary about downloading an update online from my PC, as of now.
Well, I am not sure what SAE is, and to answer that question, again, I do not know how I may have gotten the update. I bought my phone from where I am currently living, Malaysia.

Can you make a print screen of your SAE update problem?

sorry, but um, can you please enlighten me as to what is SAE? I am truly sorry for not knowing this.

piring said:
sorry, but um, can you please enlighten me as to what is SAE? I am truly sorry for not knowing this.
Click to expand...
Click to collapse
SEA is the code Southeastern Asia

Ohhh. haha. Sorry, was wondering what SAE was. Will update as soon as possible.

ibeqa said:
Can you make a print screen of your SAE update problem?
Click to expand...
Click to collapse
Hey there, I couldn't really printscreen it, as it was in the updating process (the one with the Android bot and the black screen behind) anyway, it just it failed. That's all.
Here's however, a printscreen of the update.

piring said:
Hey there, I couldn't really printscreen it, as it was in the updating process (the one with the Android bot and the black screen behind) anyway, it just it failed. That's all.
Here's however, a printscreen of the update.
Click to expand...
Click to collapse
So OTA fails., what's the code of error (why it fails)?
Also, you can try manual update or the "3 button update" (it is described in the forum).
But the most important thing is to know why it fails.
P.S. You can take print screens from the Hisuite during update or when it fails

piring said:
Hey there, I couldn't really printscreen it, as it was in the updating process (the one with the Android bot and the black screen behind) anyway, it just it failed. That's all.
Here's however, a printscreen of the update.
Click to expand...
Click to collapse
Hi piring, I've encounter the same issue with updating from B133SP01 to B620, my set is a"SOUTH PACIFIC" model.
I even brough my set to the huawei service centre to see if the technician over there can solve the issue but unfortunately, they are just as clueless as I am..... They did a factory reset of my set and tried to install the update again but the update still fail to install. There is no error code but only "fail" word appearing. They claim it's because my set was rooted but when I have unroot my phone, it still.can't update.
So if you managed to successfully updated your set, can you share with me how to go about it? Thanks.

[email protected] said:
Hi piring, I've encounter the same issue with updating from B133SP01 to B620, my set is a"SOUTH PACIFIC" model.
I even brough my set to the huawei service centre to see if the technician over there can solve the issue but unfortunately, they are just as clueless as I am..... They did a factory reset of my set and tried to install the update again but the update still fail to install. There is no error code but only "fail" word appearing. They claim it's because my set was rooted but when I have unroot my phone, it still.can't update.
So if you managed to successfully updated your set, can you share with me how to go about it? Thanks.
Click to expand...
Click to collapse
Oh. well, to be honest, I kinda given up hopes on how to update it. And with that, I am still clueless as to how to update it. I have tried using HiSuite, but to my surprise, HiSuite mentioned that my phone is already up to date. So, I am honestly puzzled as to how my phone is pushing for an OTA, but HiSuite insists that my phone model is of current and latest update.
Sorry I am unable to help you.

piring said:
Oh. well, to be honest, I kinda given up hopes on how to update it. And with that, I am still clueless as to how to update it. I have tried using HiSuite, but to my surprise, HiSuite mentioned that my phone is already up to date. So, I am honestly puzzled as to how my phone is pushing for an OTA, but HiSuite insists that my phone model is of current and latest update.
Sorry I am unable to help you.
Click to expand...
Click to collapse
Hi piring, same thing goes for my HiSuite as well. It's kinda of sucks that the update is available but can't update. It's even more worse that Huawei service centre cannot do anything about it and just tell me forget about the update and ignore the notification. Now i have a phone with a permanent notification mark that i cannot get rid of.
P7-L10 is a good phone but the support i'm getting from Huawei service centre is really unprofessional and disappointing.
But anyway, thanks for your reply.

New method of Google login and GSM Install 26th Sept 2020

https://youtu.be/4HfWs3kfCPI

p82maarj said:
https://youtu.be/4HfWs3kfCPI
Click to expand...
Click to collapse
Great finding!
Is this 100% working?
I might wait for a while, I currently have partly working gms, just a lot of play protect errors etc and no location services in third party apps, but phone is working, so I do not want to risk resetting it and then not being able to reinstall them [emoji57]
Sent from my ELS-NX9 using Tapatalk

Do we need to downgrade to 131?im on 154

Finally!!! It works!! Thank you for sharing! My Google services are back. ????????

Doesn't work for me still, G app still comes up with popup error and closes

Confirmed working, I’m on firmware 131 (didn’t update my device since I got it!) thank you!!!
My Barclays Bank app works too, I’m so pleased! Im not going to be updating my phone

Do the push notifications work for all apps? If yes, is there same guide in english pls? Currently got PlayStore working but some apps (ebay, Gmail and few otherapps does not push any notifications)

irekpa said:
Do the push notifications work for all apps? If yes, is there same guide in english pls? Currently got PlayStore working but some apps (ebay, Gmail and few otherapps does not push any notifications)
Click to expand...
Click to collapse
My WhatsApp seems to be working fine. I haven’t received anything on any other apps

wezzel98765 said:
My WhatsApp seems to be working fine. I haven’t received anything on any other apps
Click to expand...
Click to collapse
So it's not 100% perfect solution then... Is it?

irekpa said:
So it's not 100% perfect solution then... Is it?
Click to expand...
Click to collapse
I’ve not bought anything on eBay today or received any notifications on other apps because I’ve not received anything on them

working just fine !!!! :good: i'm back on google !!!

Working on p40 pro 154?

Do i need to downgrade from 154?

avivasaf said:
Do i need to downgrade from 154?
Click to expand...
Click to collapse
i was on 154 and i downgrade to 131 directly to avoid any compatbility issue with lzplay

avivasaf said:
Do i need to downgrade from 154?
Click to expand...
Click to collapse
I think so, i tried on 154 and got the error pop up on lzplay, im downgrading to 131 at the moment

I downgraded my P40 Pro to 131 , everything works but i can't get rid of errors from play store. The solution doesn't work to get rid of them I tried this 7 times and always got error spam .
/edit
Ok i tried it 10 times and in step when u use files to get rid of errors after installing second file from solicion errores and restarting the phone the spam of google errors starts again . Anyone got this method form start to end without problems ?

Account contact was sync?
Im with error Just in contacts.

szychor said:
I downgraded my P40 Pro to 131 , everything works but i can't get rid of errors from play store. The solution doesn't work to get rid of them I tried this 7 times and always got error spam .
/edit
Ok i tried it 10 times and in step when u use files to get rid of errors after installing second file from solicion errores and restarting the phone the spam of google errors starts again . Anyone got this method form start to end without problems ?
Click to expand...
Click to collapse
Open notification centre, drag the notification to the left, click the cog wheel, now disable notifications.
Sorted

megadu said:
Account contact was sync?
Im with error Just in contacts.
Click to expand...
Click to collapse
Check my post here to find the solution for contacts syncing.

Ok it seems to be working fine now. If someone have errors after restarts you have to repeat steps from 15:50 to 20 min .

Question How to install GMS on the mate x2 harmonyOS?

Hi everyone!
I've tried some tutorials and in the end I have device is not play certified and can't log in to account.
I will donate for the step by step help
Thanks

Can't even get HarmonyOS beta profile anymore.

Nookie 3:16® said:
Can't even get HarmonyOS beta profile anymore.
Click to expand...
Click to collapse
I just did update last night. There are guides how to on YouTube.

I stand corrected. Thank you

I've tried old method, but I can't install and activate this chinese application in first step after restoring the app.
I always get network error
Screenshot
Captured with Lightshot
prntscr.com

Try downgrading to EMUI 11 first and see if that makes a difference

ultrajapa said:
Try downgrading to EMUI 11 first and see if that makes a difference
Click to expand...
Click to collapse
I've found how to. Downgrading now. I'll report

So the process is easy.
1) Downgrade to latest EMUI
2) Follow these video
Thanks ultrajapa for the video.
3) Install all and you can now again upgrade to Harmony OS and it works well.
Now I have only the problem that I did uninstalled MicroG and can't loggin to my second account.
I am afraid to reinstall it for logging in.
Did anybody tried?

shffhm said:
So the process is easy.
1) Downgrade to latest EMUI
2) Follow these video
Thanks ultrajapa for the video.
3) Install all and you can now again upgrade to Harmony OS and it works well.
Now I have only the problem that I did uninstalled MicroG and can't loggin to my second account.
I am afraid to reinstall it for logging in.
Did anybody tried?
Click to expand...
Click to collapse
I'm encountering an error when I try launching Google Assistant app. It prompts an error in Chinese "to check network connection, because of strange network activity detected". Doesn't allow me to continue after that.
Anyone having the same issue? I'm on EMUI11.

Lighthouse2602 said:
I'm encountering an error when I try launching Google Assistant app. It prompts an error in Chinese "to check network connection, because of strange network activity detected". Doesn't allow me to continue after that.
Anyone having the same issue? I'm on EMUI11.
Click to expand...
Click to collapse
Managed to install it after a 2nd round. So working fine now. Thanks...

shffhm said:
So the process is easy.
1) Downgrade to latest EMUI
2) Follow these video
Thanks ultrajapa for the video.
3) Install all and you can now again upgrade to Harmony OS and it works well.
Now I have only the problem that I did uninstalled MicroG and can't loggin to my second account.
I am afraid to reinstall it for logging in.
Did anybody tried?
Click to expand...
Click to collapse
Is your push notifications working also with harmony os? If so what method did you use to get to work? Worried about upgrading from emui 11 to harmony os with Google and push working with emui 11 as of today.
Currently freezing gsf to get push notifications working.

my mate x2 arriving next week, found the following video Google, anybody tried it or should I use the above one...
Thanks....

Unbricking from FRP using a ROM?

I don't have my username or password for my US997 G6 and I tried loading the .kdz ROM from the factory using LGUP and the phone in Download Mode. That didn't really start from a clean slate since the problem still happens.
After boot it it wants to connect to wifi in the new phone setup and then get me to login to google. I can't login. The phone has an unlocked bootloader, I get scary danger text when initially powering it on but I can only do download mode I think?
How could I lay a ROM on it that wipes the FRP account w/out booting to fastboot? Is there a hack I could do? I'd hate to toss the phone, it still is a great device.

Do you have android 7.0? Or newer?
If you have nougat than you can unlock it in 5-15 seconds making initial configuration screen crash and ending up on home screen.

WojtekCC said:
Do you have android 7.0? Or newer?
If you have nougat than you can unlock it in 5-15 seconds making initial configuration screen crash and ending up on home screen.
Click to expand...
Click to collapse
It is Android 8. Are there any tips to make the initial configuration screen crash for that version?

powershift said:
It is Android 8. Are there any tips to make the initial configuration screen crash for that version?
Click to expand...
Click to collapse
I dont know, it was working on android 7.
Try this
https://www(dot)youtube(dot)com/watch?v=sGXc1sQkG2s
There is only one way to find out.
If didn't, try searching in youtube "lg g6 frp" or something like that.

WojtekCC said:
I dont know, it was working on android 7.
***Mod edit: link removed***
Click to expand...
Click to collapse
I did have Android 7. I followed that tutorial but when the screen was bypassed, the phone did an automatic wipe and did a factory reset and put the phone back to a brick state.
Motivated by that video, I retried the steps but this time after connecting to WIFI and before doing the bypass, I disabled the internet on the WIFI hotspot but kept the WIFI connection UP. Then followed the steps so Android couldn't connect to the internet and it let me in. Thank you!!

Factory Reset Protection is generally an anti-theft measure; the best way around it is to reset your Google password.
Otherwise, a method for FRP unlock is available on the XDA Portal.
@powershift if this is a device you recently purchased, I'd suggest contacting the seller. If it actually is your device, try resetting your Google account password using a PC.

If you still need it done I can let you know what I did, and share the files. Spent about 14 hours finally figuring out a method around the FRP. It will depend what version it's on though

TBurn420 said:
If you still need it done I can let you know what I did, and share the files. Spent about 14 hours finally figuring out a method around the FRP. It will depend what version it's on though
Click to expand...
Click to collapse
Hey can you dm me I got a second hand lgv20 but the steps shouldn't be so different, it's a ls997 and it's on 7.0 zv5