J7 prime sm-610f - Samsung Galaxy J7 Prime / J7 On NXT (Exynos7870)

I have the 610F rooted with twrp method... everything went fine... a few days into rooting after a reboot it went into frp lock... I've down loaded the stock roms from sammobile but everytime I load the 4 files on Odin it denies the AP says incorrect binary. I've tried to reflash twrp with no luck... says recover install block by frp.
When I try to boot it it gets here and I'm stuck...

Related

[SOLVED]Recovery won't boot, and phone boots recovery automatically.

Hello all!
Having a difficult issue with my phone. I downloaded and flashed SpaceX-Kernel_MM_RC1_G920F_Test.tar.md5 along with using SuperSu 2.65.apk to root my phone in stock.
Everything went fine, and I installed TWRP Manager to flash the latest TWRP. The flash and verify failed, and it tells me I either already have it installed or something is wrong. Reboot into recovery?
I rebooted my phone, and the screen is stuck with "RECOVERY IS NOT SEANDROID ENFORCING" with the Samsung Logo. Now I can power down and go back into download mode, but I can not flash Twrp via odin, even when it passes the phone is stuck on the recovery screen. I can't restart my phone to boot normally either.
Any suggestions? Thanks in advance.
Edit:
I downloaded the stock firmware from sammobile, and flashed it via Odin 3.10.7. At first it was freezing Odin, after a few tries I closed all my programs and restarted my computer. I reopened Odin with Admin privileges, and flashed again. This time it worked! I guess I will try flashing twrp again.

Need Help: stuck on samsung logo after restarting

Hi
The device is Samsung Galaxy Tab S2 8.0 SM-T713.
Following is what happened:
1. Installed TWRP and then Installed Lightning ROM v1.0.
2. Restarted the tablet without turning on OEM Unlock.
3. Did not boot by giving error "custom binary blocked by frp lock"
4. Tried installing stock firmware with odin. Firmware installs successfully but when the tablet reboots, it keep showing the glowing samsung logo.
5. Tried multiple different firmwares and eventually tried the latest firmware for the XAR region. Now only that firmware can be installed and all other older firmwares fail in the installation step giving the error "sw rev check fail aboot fused 2 binary 1"
Would really appreciate if anyone could help.
I assume that flashing pit file with the latest XAR region firmware will help boot the tablet but i cannot find the pit file to use.
Please HELP!
I think your problem is the result of flashing TWRP prior to flashing the stock ROM via Odin. Try this. Do a full wipe via TWRP. Then instead of booting into TWRP and then selecting "download" to use Odin, boot directly into download mode by holding Home, Vol down and power. Then flash the stock ROM. This should not only allow you to boot, but should also replace TWRP with the stock recovery. If it still doesn't boot, you should be able to use the stock recovery to perform a full wipe and again try Odin to install stock. But until you get the stock ROM to boot, trying any other ROM is useless.
lewmur said:
I think your problem is the result of flashing TWRP prior to flashing the stock ROM via Odin. Try this. Do a full wipe via TWRP. Then instead of booting into TWRP and then selecting "download" to use Odin, boot directly into download mode by holding Home, Vol down and power. Then flash the stock ROM. This should not only allow you to boot, but should also replace TWRP with the stock recovery. If it still doesn't boot, you should be able to use the stock recovery to perform a full wipe and again try Odin to install stock. But until you get the stock ROM to boot, trying any other ROM is useless.
Click to expand...
Click to collapse
The problem is that the TWRP recovery is long gone. Its not on the tablet anymore. I cannot flash TWRP because of FRP lock. I can access stock recovery but it also does not allow me to wipe data and factory reset due to FRP lock.
Any other suggestions.
I was able to finally restore the device using the method described in a sammobile forum.
Look at the second post on the thread titled " SmartSwitch: Install & update or replace firmware".
It is a tutorial to reinitialize the device to factory settings using Samsung Smart Switch software.
rafayzq said:
I was able to finally restore the device using the method described in a sammobile forum.
Look at the second post on the thread titled " SmartSwitch: Install & update or replace firmware".
It is a tutorial to reinitialize the device to factory settings using Samsung Smart Switch software.
Click to expand...
Click to collapse
I can't find that thread in the Sammobile forum but just googling "FRP lock" brings up a bunch of You Tube videos on how to remove the lock. Personally, I've never run into the problem.
I didn't realize from the OP that getting the stock ROM back was due to the lock but rather that the tablet was stuck at the Samsung logo rather that where you are asked for the Google login info.
Just so I've got it right and others understand, before you attempted to install a new ROM, was there an option in settings that would have allowed you to turn off using the lock and thereby have avoided the problem?
lewmur said:
I can't find that thread in the Sammobile forum but just googling "FRP lock" brings up a bunch of You Tube videos on how to remove the lock. Personally, I've never run into the problem.
I didn't realize from the OP that getting the stock ROM back was due to the lock but rather that the tablet was stuck at the Samsung logo rather that where you are asked for the Google login info.
Just so I've got it right and others understand, before you attempted to install a new ROM, was there an option in settings that would have allowed you to turn off using the lock and thereby have avoided the problem?
Click to expand...
Click to collapse
All the problems started when i restarted the tablet running a custom rom without enabling the OEM Unlock option in Developer Options in settings.
The lesson i learned the hard way is that you should always keep the OEM Unlock enabled

DRK & FRP Issue. All help is welcomed and needed.

So my coworker has a Galaxy S6.
This phone was running nougat. She rooted the phone herself to be able to use 'Snapchat'. The other day she did a factory reset which softbricked her phone so she took it to a store where they installed 6.0.1 and the phone was supposedly rooted although supersu said that the binary was not present. Her phone was acting up so i told her to do a wipe cache. after the restart the device said Custom Binary blocked by FRP
then i flashed Nougat (last version). The device presented the bluescreen that said: Device does not have DRK, contact to SW PL please flash ENG binary then install DRK rebooted into recovery and then in the recovery, every time it boots into recovery it says: No Support SINGLE SKU. Supported API: 3. Dm-verity error.... Failed code: 0x02
I tried flashing TWRP but it was blocked by FRP returning the error in download mode: Custom Binary (recovery) blocked by FRP
I cant enable OEM Unlock because the phone wont pass the Samsung Galaxy S6 logo.
What can i do? What options do i have?
************update 1
I downloaded the CF Auto root from Firmware.Mobi: Problem is: The phone is not OEM Unlocked and i don't have access to the phone settings so i can't flash CF auto root because i can't flash a recovery.
************update 2
I can't downgrade either to 6.0.1 (QC2) . So i'm stucked on Nougat, when i try to downgrade it says: (Device 6 Binary 5). Can't root it, can't flash a recovery.
Is there any way to turn off FRP from the recovery using ADB ? Is there anything i can flash in spite of the phone running Nougat so that i can turn off FRP ?
Should i go to a store and ask for DRK to be fixed with a Z3X box ?

Note 5 N920G Stuck at Samsung logo

I'm in a weird situation, I flashed the latest stock firmware for my phone (N920GDDS4CRD2_N920GODD3CQJ2_N920GUBU4CRA1_HOME.tar) through odin and now it is stuck. Then I went to download mode again to flash twrp just to try to wipe cache and stuff to get it working, no luck as it wouldn't boot into recovery. Then I tried flashing the same firmware through odin again but I get an error (sw rev. check failed), I know why I am getting this. its because the phone doesn't allow downgrading and the firmware that I am trying to flash is the latest one. Any help would be appreciated.
Check last twrp installed. Next try flash any custom rom.zip

Note5 SM-N920i FRP on DM-VERITY problems

Hello, and thank you all for reading and trying to help. Let me explain the situation..
all working until i accidently went into dev options and forgot to turn the OEM Bootloader Unlock back on. Reboot and FRP fail. Yes rookie error.
So after trying to reflash stock firmware (U5), reboot into stock recovery and dm-verity error occurs. FRP lock is on so i cannot flash TWRP and im all out of ideas...
things ive tried.
tried multipule combinations of flashing boot.img, repacking stocks with and without certain img contents etc and reflashing. Maybe i havnt found the right combination?
reflashing stock firmware (N920IDVU5CRK2_N920ITEL5CRK1_TEL), and wiping DATA from recovery after ODIN PASS. Just noticed the other day if i do the recovery key combo after its first initial boot during the 'installing update' screen, it will pose a 'no command' screen, then after a few moments dumps me into the recovery with a dm-verity successfull. But if i reboot again it will dm-verity error. So i was thinking maybe i need to hit download mode after the successful dm-verity and flash without recovery.img. Not sure as my lack of understanding but id love to fix this.
any help, suggestions would be appreciated and if any further information is needed im more than happy to provide.
(phone is out of warrenty)
(currently binary 5 and using stocks from sammobile)
Try root with ctautoroot
Sent from my Redmi Note 8 using Tapatalk

Categories

Resources