So my coworker has a Galaxy S6.
This phone was running nougat. She rooted the phone herself to be able to use 'Snapchat'. The other day she did a factory reset which softbricked her phone so she took it to a store where they installed 6.0.1 and the phone was supposedly rooted although supersu said that the binary was not present. Her phone was acting up so i told her to do a wipe cache. after the restart the device said Custom Binary blocked by FRP
then i flashed Nougat (last version). The device presented the bluescreen that said: Device does not have DRK, contact to SW PL please flash ENG binary then install DRK rebooted into recovery and then in the recovery, every time it boots into recovery it says: No Support SINGLE SKU. Supported API: 3. Dm-verity error.... Failed code: 0x02
I tried flashing TWRP but it was blocked by FRP returning the error in download mode: Custom Binary (recovery) blocked by FRP
I cant enable OEM Unlock because the phone wont pass the Samsung Galaxy S6 logo.
What can i do? What options do i have?
************update 1
I downloaded the CF Auto root from Firmware.Mobi: Problem is: The phone is not OEM Unlocked and i don't have access to the phone settings so i can't flash CF auto root because i can't flash a recovery.
************update 2
I can't downgrade either to 6.0.1 (QC2) . So i'm stucked on Nougat, when i try to downgrade it says: (Device 6 Binary 5). Can't root it, can't flash a recovery.
Is there any way to turn off FRP from the recovery using ADB ? Is there anything i can flash in spite of the phone running Nougat so that i can turn off FRP ?
Should i go to a store and ask for DRK to be fixed with a Z3X box ?
Related
Hi
i was using Note 5 N920C with 5.1.1 Smoothly.i just rooted phone with SpaceX-Kernel-v0.1 Successfully after i put my google and samsung account after Restart phone i am getting this MSG KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock. then power off.
i still able to enter in DLM and Recovery Mode i wiped my data from recovery cashe but still same.
i also tried to install stock Rom but its Failed
plz advise me what should i do now
Thanks
saqi4you said:
Hi
i was using Note 5 N920C with 5.1.1 Smoothly.i just rooted phone with SpaceX-Kernel-v0.1 Successfully after i put my google and samsung account after Restart phone i am getting this MSG KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock. then power off.
i still able to enter in DLM and Recovery Mode i wiped my data from recovery cashe but still same.
i also tried to install stock Rom but its Failed
plz advise me what should i do now
Thanks
Click to expand...
Click to collapse
Put your phone in Download Mode, and update it via Smart Switch.
I used smart switch to update my G925V to marshmallow, and this happened:
First a dead android with a yellow triangle, which said something about DRK,
then it boots into recovery saying:
( device does not have DRK (device root key ), contact to SW PL
please flash ENG binary then install DRK
i restarted the phone then again to recovery mode saying
Supported API: 3
dm-verity verificztion failed...
Need to check DRK first...
Any help or troubleshooting would be awesome.
You can try to flash a stock image in ODIN.
If that doesn't work you'll need to get ahold of Samsung or go to a Verizon store and hopefully they will replace it.
I used smart switch to update my G925V to marshmallow, and this happened:
First a dead android with a yellow triangle, which said something about DRK,
then it boots into recovery saying:
( device does not have DRK (device root key ), contact to SW PL
please flash ENG binary then install DRK
i restarted the phone then again to recovery mode saying
Supported API: 3
dm-verity verificztion failed...
Need to check DRK first...
Any help or troubleshooting would be awesome.
Hello, guys
G925V DRK problem too.
After writing official firmware G925VVRU4CPH1_G925VVZW4CPH1_VZW:
Device does not have DRK, please install DRK first.
And i'm try write combination file:
COMBINATION_VZW_FA50_G925VVRU4AOJ1_VZW4AOJ1_CL5133 452_QB6486176_REV02_user_mid_noship.tar.md5
But after write "UFS Provision Fail" !!!
How to solve ?
Help me guys !!!
I think the problem lies in the fact your combination file is an OJ1 based firmware. You won't be able to a full downgrade like that right away all at once. Your modems won't let you for one. And the only part of that package that may boot up is the sboot.bin file.
And even then, once that sboot.bin is flashed, you'll have to go straight back to download/recovery mode and not let it do a full boot. Do your work, and then [probably] go back to the newer sboot.
hello
i have note5 920c
my phone is root and recovery...
i flash custom rom with twrp ( custom note7) and every things is good but after restart my phone bootloop on samsung logo and on logo write : Custom Binary block by FRP lock
i tried to flash stock rom by odin.... but not flash this rom(stock 6.0.1 )... and error odin.. after flash my phone dont turn off and stay on : an error occurred while
updating the device software
use the emergency recovery function
in the smart switch pc software
on this error write : sw check fail device 1 binary 0
how can fix this problem ? may solve it ba samsung box ? zx3 ?
you can flash the latest stock rom for N920C
Uhm...i faced similar issue. You left oem unlock disabled, which is wrong.
First book into stock recovery, wipe data/factory reset. Wipe everything wipable, then go to download mode. Flash 5.1 stock. If it doesn't work, repeat the wiping, then flash 6.0. Good luck
So i flashed custom rom and wanted to root. I had by then, disable OEM Unlock because an app didn't work. So i forgot to enable before rooting, now i can't boot my phone at all.
I tried what i did on my Galaxy s8 at that time, but it get's stuck at Sboot.img when flashing latest stock firmware using odin.
Anyone know what i can do ?
It wont boot, just loops and says that red message. Custom binary frp lock
I have the 610F rooted with twrp method... everything went fine... a few days into rooting after a reboot it went into frp lock... I've down loaded the stock roms from sammobile but everytime I load the 4 files on Odin it denies the AP says incorrect binary. I've tried to reflash twrp with no luck... says recover install block by frp.
When I try to boot it it gets here and I'm stuck...