Hi
The device is Samsung Galaxy Tab S2 8.0 SM-T713.
Following is what happened:
1. Installed TWRP and then Installed Lightning ROM v1.0.
2. Restarted the tablet without turning on OEM Unlock.
3. Did not boot by giving error "custom binary blocked by frp lock"
4. Tried installing stock firmware with odin. Firmware installs successfully but when the tablet reboots, it keep showing the glowing samsung logo.
5. Tried multiple different firmwares and eventually tried the latest firmware for the XAR region. Now only that firmware can be installed and all other older firmwares fail in the installation step giving the error "sw rev check fail aboot fused 2 binary 1"
Would really appreciate if anyone could help.
I assume that flashing pit file with the latest XAR region firmware will help boot the tablet but i cannot find the pit file to use.
Please HELP!
I think your problem is the result of flashing TWRP prior to flashing the stock ROM via Odin. Try this. Do a full wipe via TWRP. Then instead of booting into TWRP and then selecting "download" to use Odin, boot directly into download mode by holding Home, Vol down and power. Then flash the stock ROM. This should not only allow you to boot, but should also replace TWRP with the stock recovery. If it still doesn't boot, you should be able to use the stock recovery to perform a full wipe and again try Odin to install stock. But until you get the stock ROM to boot, trying any other ROM is useless.
lewmur said:
I think your problem is the result of flashing TWRP prior to flashing the stock ROM via Odin. Try this. Do a full wipe via TWRP. Then instead of booting into TWRP and then selecting "download" to use Odin, boot directly into download mode by holding Home, Vol down and power. Then flash the stock ROM. This should not only allow you to boot, but should also replace TWRP with the stock recovery. If it still doesn't boot, you should be able to use the stock recovery to perform a full wipe and again try Odin to install stock. But until you get the stock ROM to boot, trying any other ROM is useless.
Click to expand...
Click to collapse
The problem is that the TWRP recovery is long gone. Its not on the tablet anymore. I cannot flash TWRP because of FRP lock. I can access stock recovery but it also does not allow me to wipe data and factory reset due to FRP lock.
Any other suggestions.
I was able to finally restore the device using the method described in a sammobile forum.
Look at the second post on the thread titled " SmartSwitch: Install & update or replace firmware".
It is a tutorial to reinitialize the device to factory settings using Samsung Smart Switch software.
rafayzq said:
I was able to finally restore the device using the method described in a sammobile forum.
Look at the second post on the thread titled " SmartSwitch: Install & update or replace firmware".
It is a tutorial to reinitialize the device to factory settings using Samsung Smart Switch software.
Click to expand...
Click to collapse
I can't find that thread in the Sammobile forum but just googling "FRP lock" brings up a bunch of You Tube videos on how to remove the lock. Personally, I've never run into the problem.
I didn't realize from the OP that getting the stock ROM back was due to the lock but rather that the tablet was stuck at the Samsung logo rather that where you are asked for the Google login info.
Just so I've got it right and others understand, before you attempted to install a new ROM, was there an option in settings that would have allowed you to turn off using the lock and thereby have avoided the problem?
lewmur said:
I can't find that thread in the Sammobile forum but just googling "FRP lock" brings up a bunch of You Tube videos on how to remove the lock. Personally, I've never run into the problem.
I didn't realize from the OP that getting the stock ROM back was due to the lock but rather that the tablet was stuck at the Samsung logo rather that where you are asked for the Google login info.
Just so I've got it right and others understand, before you attempted to install a new ROM, was there an option in settings that would have allowed you to turn off using the lock and thereby have avoided the problem?
Click to expand...
Click to collapse
All the problems started when i restarted the tablet running a custom rom without enabling the OEM Unlock option in Developer Options in settings.
The lesson i learned the hard way is that you should always keep the OEM Unlock enabled
So my coworker has a Galaxy S6.
This phone was running nougat. She rooted the phone herself to be able to use 'Snapchat'. The other day she did a factory reset which softbricked her phone so she took it to a store where they installed 6.0.1 and the phone was supposedly rooted although supersu said that the binary was not present. Her phone was acting up so i told her to do a wipe cache. after the restart the device said Custom Binary blocked by FRP
then i flashed Nougat (last version). The device presented the bluescreen that said: Device does not have DRK, contact to SW PL please flash ENG binary then install DRK rebooted into recovery and then in the recovery, every time it boots into recovery it says: No Support SINGLE SKU. Supported API: 3. Dm-verity error.... Failed code: 0x02
I tried flashing TWRP but it was blocked by FRP returning the error in download mode: Custom Binary (recovery) blocked by FRP
I cant enable OEM Unlock because the phone wont pass the Samsung Galaxy S6 logo.
What can i do? What options do i have?
************update 1
I downloaded the CF Auto root from Firmware.Mobi: Problem is: The phone is not OEM Unlocked and i don't have access to the phone settings so i can't flash CF auto root because i can't flash a recovery.
************update 2
I can't downgrade either to 6.0.1 (QC2) . So i'm stucked on Nougat, when i try to downgrade it says: (Device 6 Binary 5). Can't root it, can't flash a recovery.
Is there any way to turn off FRP from the recovery using ADB ? Is there anything i can flash in spite of the phone running Nougat so that i can turn off FRP ?
Should i go to a store and ask for DRK to be fixed with a Z3X box ?
I've successfully rooted my S4 Active with Kingoroot, but now I want to unroot. i've tried to flash a custom recovery, and I seem to have succeeded, with the phone booting up with the custom message and an unlocked lock logo. However, I'd like to restore my phone to it's stock level. Help please!
Ekuzi said:
I've successfully rooted my S4 Active with Kingoroot, but now I want to unroot. i've tried to flash a custom recovery, and I seem to have succeeded, with the phone booting up with the custom message and an unlocked lock logo. However, I'd like to restore my phone to it's stock level. Help please!
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s4-active/general/guide-update-to-i537-att-firmware-t2835481
I have a Samsung S10 (SCV41) and im trying to root it using odin but every time its saying fail in odin and on the phone in red its saying Custom Binary Blocked (vbmeta) by OEM lock.... can anyone help me pls
unlock the bootloader. or used odin patched
if you can't then your hoped
Hi, I have a rooted SM-N920C with custom rom.
I disabled OEM unlock for some stupid reason. Today my battery depleted and the phone turned off. Now I cannot boot my phone because of this error: Custom binary blocked by FRP Lock
Any solutions? Thanks.
I had to flash the stock firmware via Odin. (All my data is lost).