I've installed twrp 3.4.0-1 on my sm-ty290 using odin. odin behave like the flash was fine (green pass and 0 fail) but when i enter recovery i still get the stock recovery. Any reason for or solution?
altojd said:
I've installed twrp 3.4.0-1 on my sm-ty290 using odin. odin behave like the flash was fine (green pass and 0 fail) but when i enter recovery i still get the stock recovery. Any reason for or solution?
Click to expand...
Click to collapse
If you allow the tablet to boot to the system, your flash of TWRP will be overwrittten. In Odin you have to uncheck the auto reboot in option before flash TWRP. I'm not familiar what buttons are used on your tablet but on most you have to hold the power and vol down buttons to turn off the tablet and as soon as the screen turns off, switch your finger from vol down to vol up to boot to recovery rather than system. You only need to do this once.
Related
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
Hi, as the title says, i can't boot to twrp when the phone is powered off. It will ignore what i push and just boot into cyanogenmod.
It used to work at some point, also i can get to twrp if i restart via the twrp app.
I should probably just reflash it?
If I'd somehow lock me from the os while experimenting, i could still run twrp via fastboot in ?
kind regards!
nyanxo said:
Hi, as the title says, i can't boot to twrp when the phone is powered off. It will ignore what i push and just boot into cyanogenmod.
It used to work at some point, also i can get to twrp if i restart via the twrp app.
I should probably just reflash it?
If I'd somehow lock me from the os while experimenting, i could still run twrp via fastboot in ?
kind regards!
Click to expand...
Click to collapse
Please note power+ vol+ its to restart phone.
power+vol- to enter recovery.
so if already power down just press power+vol-
if in os press power+vol+ to reboot. when screen off power+ vol- to enter recovery
Hello, my Z1 doesn't enter in recovery mode. I've tried with TWRP and CWM and it doesn't work. I tried in classic way (turn off the phone, hold the power button+vol. down and I've tried with both vol buttons) and with ADB is just restarting normally.
Notification light must be on when I turn on the phone but mine doesn't do that:crying:
loginfailed said:
Hello, my Z1 doesn't enter in recovery mode. I've tried with TWRP and CWM and it doesn't work. I tried in classic way (turn off the phone, hold the power button+vol. down and I've tried with both vol buttons) and with ADB is just restarting normally.
Notification light must be on when I turn on the phone but mine doesn't do that:crying:
Click to expand...
Click to collapse
I am having the same problem...following.
loginfailed said:
Hello, my Z1 doesn't enter in recovery mode. I've tried with TWRP and CWM and it doesn't work. I tried in classic way (turn off the phone, hold the power button+vol. down and I've tried with both vol buttons) and with ADB is just restarting normally.
Notification light must be on when I turn on the phone but mine doesn't do that:crying:
Click to expand...
Click to collapse
Did u have try to re flash cwm or twrp?
I have the same problem. Yes I've tried to reflash TWRP and CWM and nothing happend
try installing ndr utils and see if it helps
I've tried and nothing happend. I still can't get in recovery mode. Maybe the motherboard is broken?
I have the same problem sometimes, when i flash new ROM.
Try flashing Philz dual?
LB or UB?
if unlocked bootloader flash latest ta that enables real recovery then
fastboot flash recovery recovery.img
This way you won't lose recovery even if you mess up the boot(kernel) partition
Reinstall NUT Recovery
Hi,
First of all install NUT Recovery for you Xperia Z1 and after installation of recovery turn off your phone.
Turn on your phone and repeatedly press the Vol Down Key until you see the purple color in LED Notification.
Then you can see the TWRP Recovery.
I am trying to install LineageOS on a brand new SM-T713. I have booted the device into Odin mode and used Heimdall to flash TWRP. AFAICT, this completed successfully.
Now I am supposed to power the device off and reboot it into recovery mode, but I can't figure out how to power it off.
Any ideas?
UPDATE: The solution was to hold down the volume-up, volume-down, and power buttons simultaneously; this reboots the device. Fortunately, the stock OS did not overwrite the recovery partition, so I was able to power-off and boot into TWRP.
ipilcher said:
I am trying to install LineageOS on a brand new SM-T713. I have booted the device into Odin mode and used Heimdall to flash TWRP. AFAICT, this completed successfully.
Now I am supposed to power the device off and reboot it into recovery mode, but I can't figure out how to power it off.
Any ideas?
UPDATE: The solution was to hold down the volume-up, volume-down, and power buttons simultaneously; this reboots the device. Fortunately, the stock OS did not overwrite the recovery partition, so I was able to power-off and boot into TWRP.
Click to expand...
Click to collapse
Just POWER + VOL DOWN to reboot.
My Tab S2 T713 is currently running the latest stock Samsung rom. I want to install Lineage 15.1
I've downloaded twrp-3.2.1-0-gts28vewifi.img.tar & Odin 3.12.7. I can boot into download mode, flash TWRP with Odin which says success & my tablet reboots normally. When I power down & reboot into recovery TWRP gets over written by the stock recovery.
If I uncheck Auto Reboot in Odin, after flashing success, I'm still in download mode - I've read that I need to boot directly into recovery from download mode - how do I do this?
In download mode pressing home + voldown + power reboots normally. Pressing home + volup + power does nothing
What am I doing wrong?
Gidders said:
My Tab S2 T713 is currently running the latest stock Samsung rom. I want to install Lineage 15.1
I've downloaded twrp-3.2.1-0-gts28vewifi.img.tar & Odin 3.12.7. I can boot into download mode, flash TWRP with Odin which says success & my tablet reboots normally. When I power down & reboot into recovery TWRP gets over written by the stock recovery.
If I uncheck Auto Reboot in Odin, after flashing success, I'm still in download mode - I've read that I need to boot directly into recovery from download mode - how do I do this?
In download mode pressing home + voldown + power reboots normally. Pressing home + volup + power does nothing
What am I doing wrong?
Click to expand...
Click to collapse
https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Brilliant - thank you. Why they can't have they have that in the Lineage install instructions?
Now running Lineage 15.1 = happy bunny
boxcar8028 said:
https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Click to expand...
Click to collapse
For the love of god, thank you. This wasn't in the LineageOS instructions. But I still can't install it, it says my bootloader isn't supported (T713XXU1APG1).
notmyidea said:
For the love of god, thank you. This wasn't in the LineageOS instructions. But I still can't install it, it says my bootloader isn't supported (T713XXU1APG1).
Click to expand...
Click to collapse
Did you go into your developer settings and make sure you toggled the option titled "OEM Unlock"?
sh0nuff said:
Did you go into your developer settings and make sure you toggled the option titled "OEM Unlock"?
Click to expand...
Click to collapse
Got that figured out, thanks. All installed now after much difficulty.
notmyidea said:
Got that figured out, thanks. All installed now after much difficulty.
Click to expand...
Click to collapse
Good to hear! Please make sure you give a thumbs up to anyone who helped. It really keeps the community alive and kicking!
I found that I had to do this from completely powered off state:
press home + volume up + power
wait until second "sentence" appears on screen in yellow (the first "sentence" is blue),
Then release all buttons
twrp now boots.
for some reason, my internal and external storage is showing 0 mb. Anyway to fix this?
Try formatting (not just wipe) data.
Should the Galaxy Tab S2 2016 be on TWRP 3.2.1.0 or the new 3.2.3.0 for Linage OS 15?
If so, can't you just flash the update using TWRP on the img file, or is ODIN on the tar needed?
OK, I updated to TWRP 3.2.3 using TWRP Recovery and the img file. Appears to work fine.
SvenHee said:
I found that I had to do this from completely powered off state:
press home + volume up + power
wait until second "sentence" appears on screen in yellow (the first "sentence" is blue),
Then release all buttons
twrp now boots.
Click to expand...
Click to collapse
Sorry to revisit this issue. I can't get TWRP going on my S2 Tablet. I understand these instructions, but at the end of the ODIN installation there are two possibilities that I can see. If you set the ODIN to automatically reboot then you cannot do the above because it says to do it from completely powered off.
If you don't set ODIN to reboot automatically I can't get the tablet to turn off. I can only get it to boot by holding home+volume down + power. How do I get the tablet to power off before booting??
I am using ODIN 3.14.4 and TWRP-3.7.0 9-0-gts28wifi.img.tar and my stock firmware is NRD90M.T713XXS2BSG1 with Kernel 3.10.84-14953299
Thank you.