Hi all.
I want to connect my asus rog phone 3
To the tv but it Does not work.
Now im wondering what im doing wrong OR if my phone is not working proper.
I wanted to connect with cable to reduce lag, ( wireless works fine )
Watch YouTube video's and done everything the same but it Just wont show connection.. i tried all different refresh rates and different monitors and checked the cable with a old phone and IT connect instantly.. ivee tried the side port of the phone but its Just not working while ivee seen video's where IT works instantly.. any ideas OR should i send the phone back with malfunction reasons..
I got the 512 GB version with 12gb ram
Related
Hi All,
I have a T-mobile tab with an HDMI dock and I have been using it as my media center ever since the motherboard to my HTPC has crapped out. I'm currently running overcome 1.4.2 with UC/OC kernel. My tab works fine with the dock and by that I mean playing movies or streaming from the internet from apps such as "TV shows stream". However when I activate bluetooth it disrupts my viewing anywhere from 8 to 15 minutes whereby causing the video that I was watching to restart. This has happened on my previous Roto rom as well. Again, once I deactivate bluetooth, it works fine. I'm using a logitech PS3 bluetooth keyboard to surf from my couch. Even without the keyboard connected to the tab this problem still occurs. So something with the bluetooth is causing these weird restarts of my media.
Does anyone else having this problem? It is really annoying. Perhaps modifying the bluetooth script or something to that effect is needed. Any ideas anyone? Otherwise I love my tab and even more so with the use of the dock.
Are you using wifi or 3g data when you are in the cradle?
rangercaptain said:
Are you using wifi or 3g data when you are in the cradle?
Click to expand...
Click to collapse
I'm on wifi. Never tried it with 3g.
Okay...so here's some more info. If I keep the logitech ps3 mediaboard keyboard active by moving the mouse or pressing the spacebar every 6 to 10 minutes or so the media continues to play. So it seems that when the keyboard goes into power save mode and disconnects it causes the media...ie: movie, show, or flash video to restart or exit. Does anyone else with an HDMI dock experience this problem? Videos play fine without interruption so long as bluetooth is disabled.
For those of you who aren't experiencing this issue, what brand/type of bluetooth keyboard are you using?
Okay, well it looks like I'm chatting with myself but oh well. Here's another update. Even with keeping the keyboard active through clicks or mouse movements streaming media will still restart after a given time. Usually around 10 minutes or so. Keep in mind that I have now found that it seems to only affect streaming media. Media that's on the tab plays fine with the only interruption being a brief image flicker when the bluetooth keyboard goes to power save mode. I would also like to reiterate that leaving bluetooth active on the tab does not cause any problem, streaming or not. The issues I experience only happen when the logitech mediaboard is on.
I'm hoping that the issue here is with the keyboard alone and not with tab's bluetooth program. To test out this theory I went ahead and purchased another bluetooth keyboard. I found a logitech dinovo mini on ebay for $62 with free shipping. If nothing else, the form factor of the dinovo mini is pretty cool and it has good reviews. Wish me luck with this new keyboard. I'll give an update when I receive and test out the device.
I use the apple mini keyboard, but not tge cradle. I might try it tomorrow. Good luck with the new one.
I got my Dinovo Mini in the mail this morning. It works flawlessly. No more restarts on my media!!! Very nice compact little unit. The only thing it is missing as far as the tab is concerned is a home button. Other than that, a purchase well worth the $62 bucks IMO.
P.S. --> If anyone knows what combo buttons you have to press to simulate a home button please let me know.
HDMI - Flickers
Muh
I have also problems with the Media-Dock and HDMI on my Flatsceen TV.
I'm currently using PDA: JMK.
(Firmware 2.2 / Kernel: 2.6.32.9 / Build: FROYO.XWJMK)
The Error:
The Handshake betwen the Galaxy Tab and the TV looks like it works well. After a couple of seconds I get a perfect picture with Sound. But after 5 seconds the picture disapers. 2 Seconds later it comes back for 1 second, and disapears again. The picture the starts to flicker ... comes, goes, comes, goes ... sometimes I see then snow for a second, then comes the picture back and disapears again ...
What I think what could be the Problem:
I think it could be a problem with HDCP.
What I tested:
I connected the Galaxy Tab with the same cable to a PC-Screen. Perfect picture, no problems!
About the TV:
I tried all HDMI-Ins. Including the one that is special for connecting a PC to the TV. I have no problems with my T-Online Media Resiver (Entertain) connected to my TV over HDMI. And I'm shure that HDCP is used with the T-Online Media Resiver.
Does any one have an Idea how to fix the Problem?
Greetings,
Heavy
I had an issue with the picture going in and out as well. For me the problem was I was low on charge and I had the dock powered by a non stock charger which only trickle charged at most so the picture would keep cutting out every time it told that I was low on battery. This doesnt come up until you get around 10% remaining. That was solved by using the stock charger. The only other time I had an issue is when the tab is not secure in the cradle which was remedied by disconnecting it and then re-inserting it back into the dock.
Hope that helps.
T-Mobile tab running latest Overcome
Sorry for posting this in this thread.
But, it would interest me if the HDMI-Dock really needs a USB-power-cable plugged into it to work?
Muh
Yes, the dock needs power to use the HDMI out . . .
My problem for shure does not be casted by power problems. Im getting more and more shure that I have a compatibility problem betwen the Tab and the Toshiba TV.
I will now search in HiFi forums for a fix, and inform you when I figured out something. May be a older firmware could fix it to . . .
Greetings,
Heavy
Sent from my GT-P1000 using Tapatalk
i cant understand why it needs a usb power cable for hdmi out?
is this really needed technically for it to work?
or is it just, idk to pester us?
because ipad also just has a hdmi adapter thing, where the usb cable is only optional.
sent from my galaxy tab
I dont know, but without power you will not get any signal . . . I think the dock needs the power . . .
And i can not find any help for my problem in the web. It looks like i am the only one who has this problem.
But I figured out now that the tab is using 1024i as resolution . . . Does any one know if there is a way to switch the output resolutin of the hdmi?
Sent from my GT-P1000 using Tapatalk
no the tab upscales to 1080p.
there are sometimes problems with tvs that arent fullhd. it has to be fulllhd and not hdready or something inbetween, otherwise there might be problems.
The dock needs a power cube to work. Without one it won't function. However you can use a non stock power supply but you'll end up running down the power, albeit more slowly. Why this is a necessity I'm not sure. I think for the majority of the time you would want to otherwise it will run down the juice pretty quickly since the screen stays on while outputting to the TV.
It is best to have a TV that is full 1080p. My 6 yr old TV is only 1080i but it still works. Others may have varying results.
It would be nice to have a standalone HDMI cable similar to the AV cable but I haven't seen anything like that yet.
T-Mobile tab running latest Overcome
Muh
In other teste of the docking i did also read 1024i, and thats exactly as what it has been identified by mx tv. My tv can do 1080d, that can not be the problem . . .
May be you can double check as what you tv identifies the signal?
Do you think it coulf be a idea to try an older firmware? Any known changes in the hdmi out in the firmware versions?
Sent from my GT-P1000 using Tapatalk
Ok, i know now where my problem comes from . . .
The tab realy sends 1080p, but my tv can only do 1080i. :O
Any chance to set the tab to a lower resolution for the hdmi out?
When i connect the tab to a hdmi - vga converter i will lose Audio? Right?
(the tv has a vga in)
Sent from my GT-P1000 using Tapatalk
VGA:
picture quality loss (like from DVI -> VGA)
no audio support
but its still better than cinch
So just a quick review of the NETGEAR Push2TV Wireless Display Adapter PTV3000 I just bought. Got it for a bit under $60 USD from Amazon. Did the firmware update at work before coming home -- didn't even have a TV to connect it to there! You do the update from a PC over Wifi and web interface. Now, I first tried to update the firmware from a Mac laptop I had lying around but couldn't. I could bring up the update page, but when I browsed for a file, I couldn't pick it! Tried both Safari and Chrome... Either way, just used a Windows laptop and IE 9 and the update worked fine.
Anyway, at home plugged it into my TV, picked up my Note 10.1 tablet and it works great. With the latest firmware on the Netgear, connection speed is pretty quick -- a few seconds. Video from my Note 10.1 was slightly letter boxed due to the 1280x800 resolution of the tablet ... but when you played video it would go full screen. When playing video, any on screen graphics do no show up on the TV at all. Also, on the Note 10.1 when playing video through it, you do not see video on the tablet anymore. Just black where it should be. This is fine (IMHO) ....
When using the UI of the tablet, the speed on the tablet felt unaffected (butter smooth in other words) but on the TV it was maybe running at 30fps. You could see some flight artifacting but I was sitting very close to my 52" LCD.... Text was totally readable and it looked just as good as Airplay does on the Mac.
NOW, I cannot test with my phone. Why? Well, I didn't know this, but when I tried to connect, it would connect, but after about 10 seconds disconnect. On my TV it would say HDCP Connection Error (or something along those lines.) After a little reading, turned out because my phone is rooted and has a flash count of 1 and System Status: Modified, you cannot use AllShare Cast! That is crap if you ask me, but it's how Samsung set it up.
I tried flashing stock recovery and then using Triangle Away, but the phone still says "Modified" and that sets the count back to 1. Pretty lame ... I am on a stock rom/kernel and now recovery, but something is flipping the status. I'm sure if I flashed back to 100% stock it would work fine, just like it does on my bone stock tablet .....
Honestly, this is a real bummer to me as I was excited at how well it worked with the tablet and for travelling, this tiny little box would be great for using in hotel rooms.
Oh I didn't mention, the size of it is very small -- like a deck of cards, and very light. Also it has a Mini_USB input (not Micro) and while the power adapter is 5v/1amp, it says when you turn it on you can easily power it from the USB port on a TV. Very handy.
So to sum it up:
Stock phone with unmodified system status? Get it. Cheaper than Samsung AllCast dongle and more functional because it supports Miracast (Sony Xperia, Nexus 4, some LG phones) and also Intel WiDi so basically all the current crop of Windows 7 and 8 laptops running with 3rd gen intel processors.
Modified phone like me? Better stick to the MHL HDMI adapter and you will have to get up to walk to your phone to switch the video or buy a long HDMI cable.
Fire away if you have any questions.
Edit: I made a quick Youtube video showing this thing in use: http://www.youtube.com/watch?v=JnqhZdjm16s
Hey everyone!
This is really odd.. Recently I have started using my Chromecast in a new TV that has a USB port on it. Before I was just using a normal HD TV without USB port so had to use the wall plug to get power to the Chromecast.
First time I used the device on this TV I used my phone to set it up, worked fine, used it for a few hours turned off TV and next day I tried connecting to the Chromecast but phone kept saying that nothing was found on the network, tried using both my phones to set it up but it didn't let me ( I have an GPe HTC One M7 and also an iPhone) , used a computer to set it up and it worked fine. Today I tried connecting to it again same issue, but now for some reason even on the computer its not allowing me to set up the Chromecast. I've had to do a factory reset every time I try connecting the device to my wifi network. When it was being used on my old TV I have never come across this issue, used to leave it unplugged for days sometime a month went pass and it still worked fine but don't know why on this new TV it is doing this.
I'm not too sure what to do, do I contact Amazon and get a replacement or contact Google?
I purchased it from Amazon on the first day it was released here in the UK (19th March 2014).
Thanks
t's possible the TV USB port is not providing stable enough Power for the Unit.
Try by plugging it into the wall again...
If the problem remains then it is possible the new TV is heavily shielded and blocking the WiFi signal from having a good and stable connection.
I bought an Elgato HD60S to be able to stream through my laptop or desktop from the phone. I connected the Usb C cable from sideport to elgato then HDMI from elgato to pc. Phone is recognized and its screen displayed in elgato's capture software. Now the issue; elgato loses image from the phone every other second or so and there's absolutely no consistency to screen capture. It also displays the gray distortation-like screen on every cutoff like old TV's used to do when the antenna wouldnt work. I looked it up and although there is not a whole lot of info on rog phone 2 regaering this issue, I read that a powered HDMI splitter would solve it, the issue being caused by HDCP. Ordered that, hooked it up, and still the same exact thing. Then, read elsewhere that the Asus Pro Dock is the only working way to stream from the phone. Ordered that, hooked it up, and still it's exactly the same. At this point I am absolutely clueless as to how to workaround this issue. Please help
FYI I am trying to stream PUBG and tried with both my laptop and desktop and multiple different cables, so there's that. Elgato doesnt mention the actual "HDCP" text until I reconnect the phone a couple times to it. Streaming works perfect with my Note 9 in the same setup.
Is it working now
Inorderd to bypass the hdcp block we need hdmi splitter
Is that working
rajuginne said:
Inorderd to bypass the hdcp block we need hdmi splitter
Is that working
Click to expand...
Click to collapse
Nope. Splitter didnt work for me. However, I did find a workaround which is to use "ASUS Pro Dock" in conjuction with Elgato. The culprit here is that you have to power the Dock with its Usb C port to make it work. When connected, it might seem like its still not working but it smooths out after a minute or so. Then when it is working, you can unplug that Usb C and it should remain working fine. In the end, I was still having issues with poor audio quality (crackling/popping and slowed-down speedwise), but got a fix for that as well.
The android 10 beta is here for the device try that and see if it works
@twinklejadoo bro i faced the same issue and solved it by using online hdmi splitter
Sent from my [device_name] using XDA-Developers Legacy app
So i bought a used A2 for 5500 INR.
At first i thought it was a bargain but soon it turned out to be a nightmare.
The phone is full of bugs.
Worst one is that the phone only charges through the usb port. No data transfer of any sort. like an old nokia pin charger.
OTG doesn't work. It doesn't connect to the PC.
Whenever I plug in the OTG/connect it to pc, the usb options are all greyed out (same in the developers options default usb preference).
I can't even use Gcam now bcoz the PC doesn't recognise the device at all, so can't enable Camera2api, can't root, can't install ROMS... can't even buy a new phone cuz i have no money ???
turns out my phone also have the slow Emmc issue ?....read speeds are okay but write speeds are very slow... specially Random write (~10mBps).
I read many people have faced this issues. All those Posts are old, has anyone found a solution.
gareebuser619 said:
So i bought a used A2 for 5500 INR.
At first i thought it was a bargain but soon it turned out to be a nightmare.
The phone is full of bugs.
Worst one is that the phone only charges through the usb port. No data transfer of any sort. like an old nokia pin charger.
OTG doesn't work. It doesn't connect to the PC.
Whenever I plug in the OTG/connect it to pc, the usb options are all greyed out (same in the developers options default usb preference).
I can't even use Gcam now bcoz the PC doesn't recognise the device at all, so can't enable Camera2api, can't root, can't install ROMS... can't even buy a new phone cuz i have no money ??
Click to expand...
Click to collapse
gareebuser619 said:
So i bought a used A2 for 5500 INR.
At first i thought it was a bargain but soon it turned out to be a nightmare.
The phone is full of bugs.
Worst one is that the phone only charges through the usb port. No data transfer of any sort. like an old nokia pin charger.
OTG doesn't work. It doesn't connect to the PC.
Whenever I plug in the OTG/connect it to pc, the usb options are all greyed out (same in the developers options default usb preference).
I can't even use Gcam now bcoz the PC doesn't recognise the device at all, so can't enable Camera2api, can't root, can't install ROMS... can't even buy a new phone cuz i have no money
turns out my phone also have the slow Emmc issue ....read speeds are okay but write speeds are very slow... specially Random write (~10mBps).
I read many people have faced this issues. All those Posts are old, has anyone found a solution.
Click to expand...
Click to collapse
Try to reset the phone and then check the same and you can always use adb over wifi when phone is turned on incase u need but for fastboot u need cabel anyways try installing the correct adb and fastboot drivers check and delete old drivers tis may fix it or take to local shop
KevMetal said:
gareebuser619 said:
So i bought a used A2 for 5500 INR.
At first i thought it was a bargain but soon it turned out to be a nightmare.
The phone is full of bugs.
Worst one is that the phone only charges through the usb port. No data transfer of any sort. like an old nokia pin charger.
OTG doesn't work. It doesn't connect to the PC.
Whenever I plug in the OTG/connect it to pc, the usb options are all greyed out (same in the developers options default usb preference).
I can't even use Gcam now bcoz the PC doesn't recognise the device at all, so can't enable Camera2api, can't root, can't install ROMS... can't even buy a new phone cuz i have no money ??
Click to expand...
Click to collapse
I had the exact same issue only charged and no data transfer or otg I'm computer it shows device description error but headphones worked fine I went to a mi service center and changed the usb port for rs.700 now it works like charm must be a water damaged sub board don't get cheap replacement from Amazon coz they only charge the phone and they miss out fast charging ic
Click to expand...
Click to collapse
I am also facing same issue. Can't transfer data using USB Cable